Active Innovations AI01RM Robotic Toy Remote Control User Manual GUIDE SIDE 1 FINAL
Active Innovations Robotic Toy Remote Control GUIDE SIDE 1 FINAL
Contents
- 1. Users Manual Part 1
- 2. Users Manual Part 2
Users Manual Part 1
Setup The robot comes with a 9.6V rechargable battery pack. This should be fully charged before use. The robot will run best on a level surface like a wood floor or short carpet. The four casters allow the robot to drive over cracks easily. To insert battery: lay robot face-down and remove battery key by pushing it toward the robot’s head and then pulling it out. Insert battery with cable arranged to side as shown. Connect battery cable to robot’s power cable. Place the included traction bands onto wheels completely as shown. Remote battery insertion: place 4 AAA batteries into the remote compartment on back of remote. Switch on the remote control’s power button. Don’t touch the joystick while turning on the remote. This will cause the remote (and robot) to malfunction until you turn off/turn on again. Turn on the robot using the power switch on the robot’s back panel. You will see lights come on and the robot will say “RFL”. How to use the Remote Control Switch Throw Hike How to Throw a Pass Load the ball onto the throwing hand as shown. Note that the ball fits between the two fingers. Up Joystick Down Power Switch Burst JOYSTICK - drives the robot forward, backward, and turns. Joystick control is PROPORTIONAL. This means the further you push the joystick in one direction, the FASTER it goes. Small motions on the joystick get small controlled motions on the robot. UP and DOWN arm buttons - raises and lowers the non-throwing arm (left side arm). The nonthrowing arm will rotate through about 180 degrees. BURST button - when you hold down this button, the robot drives at BURST speed (about 2x normal speed). HIKE - used to start a play when using two or more robots (see Advanced Operation section). THROW - press this key to use the throwing arm. Press, hold, then release to throw. The longer you hold the button down, the longer the throw. A brief touch of the button makes a short throw. Press and hold for 2 seconds and it throws automatically at longest range. As you hold down the THROW button, LEDs light up on the remote. This shows the power of the throw. The more LEDs that light up, the more powerful the throw. SWITCH - press this button to change remote control between multiple robots (see Advanced Operation section). Then just press the THROW button on the remote. Remember to hold down the throw button longer before releasing to throw farther. Setting Up the Robot to be a Receiver / Lineman Remove the screws from the QB hand pieces. Remove the hand pieces and store them. Install the shoulder bolt into the center hole of the robot's right arm, then remove the 2 outside screws. You cannot use the receiver hands if the 2 outside screws are left in. Slide the claw hands and the receiver plate onto the arms and fasten with screws. Do not operate the robot if the battery is hot. Allow battery to cool down before operating. For notifications about upgrades and accessories for the robot and remote control, go to: www.Active-Innovations.com www.RoboticFootballLeague.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 4.1-c036 46.277092, Fri Feb 23 2007 14:17:08 Format : application/pdf Title : GUIDE_SIDE-1_FINAL Creator Tool : Adobe Illustrator CS3 Create Date : 2007:10:11 12:06:29-06:00 Modify Date : 2007:10:11 12:06:29-06:00 Metadata Date : 2007:10:11 12:06:29-06:00 Thumbnail Width : 256 Thumbnail Height : 208 Thumbnail Format : JPEG Thumbnail Image : (Binary data 21750 bytes, use -b option to extract) Document ID : uuid:042106AF2478DC11B2B0972E9D97F8B6 Instance ID : uuid:0b3d7ca4-47df-414e-a990-b4a0a3ce42e0 Derived From Instance ID : uuid:C68C75E71C78DC11B2B0972E9D97F8B6 Derived From Document ID : uuid:C58C75E71C78DC11B2B0972E9D97F8B6 N Pages : 1 Has Visible Transparency : True Has Visible Overprint : False Max Page Size W : 11.000000 Max Page Size H : 8.500000 Max Page Size Unit : Inches Font Name : ArialMT, Arial-Black, Arial-BoldMT, Arial-ItalicMT, Arial-BoldItalicMT Font Family : Arial, Arial Black, Arial, Arial, Arial Font Face : Regular, Regular, Bold, Italic, Bold Italic Font Type : Open Type, Open Type, Open Type, Open Type, Open Type Font Version : Version 3.00, Version 2.35, Version 3.00, Version 2.90, Version 2.90 Font Composite : False, False, False, False, False Font File Name : ARIAL.TTF, ariblk.TTF, ARIALBD.TTF, ARIALI.TTF, ARIALBI.TTF Plate Names : Cyan, Magenta, Yellow, Black Swatch Group Name : Default Swatch Group Swatch Group Type : 0 Swatch Colorant Swatch Name : White, Black, Magenta, Red, Crimson, Orange, Peach, Custard, Yellow, Lime, Dried Sage, Green, Forest, Mediterranean, Bright Blue, Pure Cyan, Night Blue, Slate, Periwinkle, Plum, Lavender, Baby Pink, Bisque, Cafe Con Leche, Malt, Mocha, Pigeon, Battleship, Global Black, Global Red, Global Orange, Global Yellow, Global Lime, Global Green, Global Blue, Global Night, Global Periwinkle, Global Plum, Global Pink, Global Malt Swatch Colorant Mode : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK Swatch Colorant Type : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS Swatch Colorant Cyan : 0.000000, 0.000000, 0.000000, 0.000000, 26.999998, 0.000000, 2.999997, 0.000000, 0.000000, 32.999998, 36.000001, 80.000001, 90.000004, 100.000000, 45.999998, 100.000000, 100.000000, 30.000001, 42.999995, 50.000000, 18.000001, 0.000000, 6.999999, 25.000000, 32.999998, 42.999995, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 32.999998, 80.000001, 45.999998, 100.000000, 42.999998, 50.000000, 0.000000, 32.549998 Swatch Colorant Magenta : 0.000000, 0.000000, 100.000000, 100.000000, 94.000000, 50.000000, 25.999999, 13.000000, 0.000000, 0.000000, 10.000002, 0.000000, 30.000001, 0.000000, 0.000000, 0.000000, 50.000000, 0.000000, 27.999997, 90.000004, 45.999998, 25.000000, 24.000001, 41.999996, 44.000000, 51.999998, 0.000000, 0.000000, 0.000000, 100.000000, 50.000000, 0.000000, 0.000000, 0.000000, 0.000000, 50.000000, 28.000000, 90.000004, 25.000000, 44.309998 Swatch Colorant Yellow : 0.000000, 0.000000, 0.000000, 100.000000, 94.000000, 100.000000, 81.000000, 63.000000, 100.000000, 72.999996, 47.000003, 100.000000, 90.000004, 30.000001, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 37.000000, 48.000002, 53.999996, 80.000001, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 72.999996, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 53.729999 Swatch Colorant Black : 0.000000, 100.000000, 0.000000, 0.000000, 25.999999, 0.000000, 4.000002, 0.000000, 0.000000, 0.000000, 1.999998, 0.000000, 17.000002, 5.000001, 0.000000, 0.000000, 0.000000, 42.999995, 0.000000, 0.000000, 0.000000, 0.000000, 1.999998, 11.000001, 19.000000, 38.000000, 30.000001, 69.999999, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 19.610000 Swatch Colorant Tint : 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000 Producer : Adobe PDF library 8.00 Page Count : 1 Container Version : 11 Creator Version : 13 Creator : Adobe Illustrator(R) 13.0 For : Prast, Ryan, Bounding Box : -144 36 756 756EXIF Metadata provided by EXIF.tools