Adams Rite 80 0180 421_D 4300 Series Electrified Deadlatch Installation Instructions 421 D
User Manual: Adams Rite 4300 Series Electrified Deadlatch Installation Instructions Installation Instructions
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
"A" DIMENSIONS Inches (Millimeters) STILE PREPARATION BACK OF STILE CL "A" CL "B" RADIUS CL .980 24.9 .63 15.9 1.00 25.4 1.594 [40.48] "A" CL FLAT .62 15.7 "A" Flat Face Plate can be adjusted for right or left beveled edge doors. Radius Weather Strip is optional. CL "A" AVAILABLE FACEPLATES -.00 RADIUS 1.587 40.3 CL BEVEL RADIUS WEATHER STRIP +.015 1.010 - .000 +0.4 25.7 0 CL 1.437 36.5 6.38 162 6.81 173 5.80 147.3 HOW BACKSET IS MEASURED 2.769 70.3 FOR OPTIMUM LOCK PERFORMANCE, THE GAP BETWEEN THE DOOR AND FRAME MUST MEET INDUSTRY STANDARDS OF AN 1/8" (Must use a Face Plate for installation) .182 [20.32] Turning Key / Handle / Paddle DOES NOT pull Main Latch Assy. .06 [1.5] .611 [15.52] CAM TOLERANCE: ±.005 ( ±.13 ) 4300 SERIES ELECTRIFIED DEADLATCH 80-0180-421 Rev. D 2x #10-32 UNC-2B Adjustable Mounting Tube Bracket may be removed for mounting on bridges, tabs, or either methods. 4581 FRONT VIEW 1.437 [36.5] 2.769 [70.3] CL CL .570 14.5 Adams Rite Manufacturing Co. 260 Santa Fe Street, Pomona, CA 91767 Phone: 909-632-2300 Fax: 909-632-2369 www.adamsrite.com CL 4.635 CL 117.7 R.120 [3.0] CYLINDER CL CYLINDER CL 5.375 136.5 Press Aux Latch to secure Main Latch. Turn key, apply voltage, or operate Paddle/Handle to unlock Main Latch. As door opens, Main Latch pivots and collapses. R.156 [3.96] TYP. INSTALLATION DOOR CL TO JAMB EDGE OPERATION INSTRUCTION .42 10.6 6.38 162.1 +.005 6.885 -.000 [174.9] +.38 FLAT ECN:11899 4581 Cam Plug Assy. (included with 4300) Drill and c'sk for #10-32 X 1/2" Flat Head Machine Screws PRODUCT MUST BE INSTALLED ACCORDING TO ALL APPLICABLE BUILDING AND LIFE SAFETY CODES INSTALLATION INSTRUCTIONS Page 1 of 2 Appvd: MP Date: 03/16/12 #8-32 x 5/16" Truss Head Screw Depth Dim. Depth Dim. Yoke Tube Spacer RHR BEVEL POSITION 3/16" Hex Key Inside Stile wall Fig. 5 FLAT FACE PLATE NEUTRAL POSITION Bevel Tab Fig. 1 Mounting Plate Fig. 3 Fig. 4 LHR BEVEL POSITION Fig. 2 SOLENOID SPECIFICATION RED - BROWN YELLOW YELLOW 4300 RADIUS WEATHERSEAL FACEPLATES ONLY 4300 SOLENOID WIRING DIAGRAM BROWN BLUE ORANGE Remove Bevel Tabs MONITORING (OPTIONAL) 4300 WIRING DIAGRAM INTERMITTENT / CONTINUOUS DUTY 12 / 24V DC SOLENOID AVAILABLE VOLTAGES 12V DC CONTINUOUS DUTY, 24V DC CONTINUOUS DUTY. 120V AC LINE VOLTAGE 4603 2-AMP RECTIFIER MONITORED DEADLATCH CONTAINS AN INTERNALLY MOUNTED SWITCH. THIS SWITCH IS ACTIVATED WHEN THE DOOR IS IN CLOSE POSITION. ALL UNUSED LEADS FROM THE MONITOR SWITCH MUST BE INSULATED. WHITE (+) 4300 ELECTRIFIED DEADLATCH Common contact Normally Open contact (N.O.) Normally Closed contact (N.C.) Maximum switching current RED 4605 / 4606 -24V AC 40 VA TRANSFORMER BLACK (-) BLUE Black 24V DC Red Screwdriver Fig. 6 Adams Rite Manufacturing Co. 260 Santa Fe Street, Pomona, CA 91767 Phone: 909-632-2300 Fax: 909-632-2369 www.adamsrite.com WIRES BUNDLE 4300 SERIES ELECTRIFIED DEADLATCH 80-0180-421 Rev. D ECN: 11899 Access Control System White 4300 SERIES ELECTRIFIED DEADLATCH Fig. 7 Black White Red 0.1 Amps @ 125 VAC EXAMPLE WIRING DIAGRAM WITH N.O. MONITORING ORANGE 12V DC - VOLTAGE ADAPTOR CABLE - LOOP THE WIRES BUNDLE FROM 4300 ELECTRIFIED 'S SOLENOID UNDER AND AROUND ITS HOUSING AS SHOWN (Fig.7). - EXTEND THE WIRES RUN FROM THE POWER SOURCE AND THROUGH THE STILE PREPARATION. - CONNECT THE WIRE TO THE VOLTAGE ADAPTOR CABLE. - ATTACH VOLTAGE ADAPTOR CABLE TO 4300 WIRES BUNDLE AS SHOWN. PRODUCT MUST BE INSTALLED ACCORDING TO ALL APPLICABLE BUILDING AND LIFE SAFETY CODES X 4300 MONITOR Black = Common White = N.O. contact (Dry) Red = N.C. contact (Dry) Unused wires must be cut such that no exposed wire will touch any metallic surface Note: NOT intend to be a Rex switch. INSTALLATION INSTRUCTIONS Page 2 of 2 Appvd: MP Date: 03/16/12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.389687, 2009/06/02-13:20:35 Modify Date : 2012:03:16 09:19:06-07:00 Create Date : 2012:03:16 09:19:02-07:00 Metadata Date : 2012:03:16 09:19:06-07:00 Creator Tool : SolidWorks 2011 SP5.0 (2011272) Document ID : uuid:95e6d485-26f1-4243-aa0d-5b5aa02a59e1 Instance ID : uuid:2682bf44-7607-4d03-ae5f-7bb8d3643a24 Format : application/pdf Title : 80-0180-421_D Creator : pnguyen\pnguyen (PNGUYEN) Producer : SolidWorks PDF Publisher Page Mode : UseOutlines Page Count : 2 Author : pnguyen\pnguyen (PNGUYEN)EXIF Metadata provided by EXIF.tools