Adams Rite 80 0180 4591MA_C 459XMA Paddle Operator Installation Instructions 4591 4591MA C

User Manual: Adams Rite 459XMA Paddle Operator Installation Instructions Installation Instructions

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadAdams Rite 80-0180-4591MA_C 459XMA Paddle Operator Installation Instructions 4591 80-0180-4591MA C
Open PDF In BrowserView PDF
4580 CAM DISC HANDING

LOOKING AT THE EDGE OF THE DOOR, DETERMINE ON WHICH
SIDE THE HANDLE OR OTHER OPERATOR IS TO BE INSTALLED.

SUGGESTED
WIRING DIAGRAM
115 VAC LINE

ON THIS SIDE

POWER
SOURCE
RED

24 VAC

ON THIS SIDE

N.C
BLACK

ACTUATING

C
LOAD

THE CAM DISC MUST BE
HANDED AS SHOWN.

SWITCH

N.O

WHITE

THE CAM DISC MUST BE
HANDED AS SHOWN.

INSTRUCTIONS FOR CHANGING HAND OF 4580 CAM DISC
STEP 2

STEP 1

STEP 3

STEP 4
SNAP THE RETAINER CLIP
INTO THE GROOVE ON THE
CAM PIVOT PIN.

REMOVE THE
RETAINER CLIP

DO NOT REMOVE
THE DRIVER PIECE

PULL THE CAM PIVOT PIN OUT
OF THE CAM DISC AS SHOWN.

wwww.adamsrite.com

80-0180-4591MA REV C

Phone: 800-626-7590

CR 322-14

Fax: 866-582-4641

TURN THE CAM DISC OVER
AND RE-INSTALL THE CAM
PIVOT PIN AS SHOWN

459XMA PADDLE OPERATOR

INSTALLATION
Ø1.25"

CL

4580
CAM DISC

2X Ø.328" +.312"/-0"

CYLINDER CL

ESCUTCHEON
ASSEMBLY

SET
SCREWS

5/16-24
NUT

BINDER
POST

REMOVE THE DOGGING
SCREW WHEN USED IN
PULL CONFIGURATION
DRIVER EARS

3.00"

.63"
1.718"

LATCH
CUTOUT

LABEL

.50"

PADDLE
ASSEMBLY
BACKSET OF
DEADLATCH

PIVOT PIN

SEM SCREW

STEP 2

STEP 1

STEP 3

1. INSTALL 4700 SERIES DEADLATCH
PER MOUNTING INSTRUCTIONS.

1. PREPARE STILE AS SHOWN.

1. INSTALL ESCUTCHEON ASSEMBLY.
ROUTE WIRING THRU .50 HOLE.
2. USING 10-32 SEM SCREWS, SECURE
ESCUTCHEON ASS'Y. TO BINDER POST.

2. INSTALL 4580 CAM DISC ASSEMBLY
ANDSECURE WITH SET SCREW.
(SEE REVERSE FOR CAM DISC
HANDING).

2. INSERT BINDER POST THRU Ø.328 HOLE IN STILE.
3. SECURE BINDER POST WITH 5/16-24 NUT.

IMPORTANT
TIGHTEN THESE SCREWS SECURELY.

DRIVE PLATE

SET SCREW

STEP 4
1. INSTALL PADDLE ASS'Y. ALIGN DRIVE EARS
ON PADDLE WITH SLOT IN DRIVER PLATE.
2. INSTALL PIVOT PIN.
3. INSTALL PIVOT PIN SET SCREW. TIGHTEN SET
SCREW FLUSH WITH BOTTOM OF ESCUTCHEON.

INSTRUCTIONS FOR CHANGING HAND
DRIVER
SCREW

DRIVER
SCREW

TOP

KEEPER
PIN ON
FAR SIDE

PIN ON
FAR SIDE

PULL TO LEFT
OUTSIDE

RH

PULL TO RIGHT

PUSH TO LEFT

PUSH TO RIGHT
LHR

LH

RHR

SPRING

DRIVER SCREW
INSIDE

PIN

1. FIND DESIRED CONFIGURATION.
2. REMOVE KEEPERS TO SEE LOCATION
OF SPRING & DRIVER PLATE.

3. REVERSE SWITCH IF NECESSARY.
4. IF NECESSARY, REMOVE SPRINGS
AND DRIVER PLATE.

www.adamsrite.com

5. MOVE ROLL PIN TO DESIRED LOCATION.
6. REPLACE DRIVER PLATE & SPRING.

Phone: 800-626-7590
Fax:
866-582-4641

7. REMOVE DRIVER SCREW IF NECESSARY
AND PLACE IN DESIRED LOCATION.
8.. REPLACE KEEPERS.

80-0180-4591MA REV C
CR 322-14

DRIVER PLATE

459XMA PADDLE OPERATOR
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.389687, 2009/06/02-13:20:35
Modify Date                     : 2014:10:08 13:35:15-07:00
Create Date                     : 2014:10:08 13:35:12-07:00
Metadata Date                   : 2014:10:08 13:35:15-07:00
Creator Tool                    : SolidWorks 2014 SP4.0 (2014161)
Document ID                     : uuid:f0b7afe2-6f84-4418-b6e8-be20c67ff4fa
Instance ID                     : uuid:d2557b55-0991-4b0b-8f5d-dad5ad68498a
Format                          : application/pdf
Title                           : 80-0180-4591MA_C
Creator                         : AD\LuiMen (USPHOD-ENGR05)
Producer                        : SolidWorks PDF Publisher
Page Mode                       : UseOutlines
Page Count                      : 2
Author                          : AD\LuiMen (USPHOD-ENGR05)
EXIF Metadata provided by EXIF.tools

Navigation menu