Adams Rite Parts Manual AR 2019 2020
User Manual: Adams Rite Adams Rite Parts Manual Parts Manual
Open the PDF directly: View PDF .
Page Count: 78
Download | |
Open PDF In Browser | View PDF |
Parts Manual Prices Effective December 1, 2019 Adams Rite LIMITED WARRANTY Effective as of October 1, 2019. Adams Rite Limited Warranty Adams Rite warrants that its products sold under the Adams Rite brand in the United States of America are warranted free from defects in workmanship and materials under normal use and service. This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping and handling, corrosion, erosion, ordinary wear and tear, misuse, abuse, accident, unauthorized service, or use with unauthorized non-Adams Rite products or parts. This warranty is void if any modification is made to the product, regardless of whether the modification causes or contributes to the alleged defect. All modifications are made at the risk of the party making the modification. Should any defect of manufacture (in material or workmanship) occur in its products, Adams Rite, upon prompt notification and proof to its satisfaction that the product was defective in manufacture for the use intended by Adams Rite, will at its option, exchange the product, repair the product, or refund the price charged by Adams Rite, FOB factory within the stated time frame listed below. . • 10 years on all mechanical products from the date of manufacture • 5 years on the following electromechanical product categories from the date of manufacture, deadlocks, dead latches, exit devices*, electric strikes, trims, power supply & accessories * NOTE: The SE option (motorized electric latch retraction) is supported by a 1-year electro mechanical warranty. When powered by an Adams Rite PS-SE power supply the 1-year warranty is upgraded to 5 years • 3 years on the following access control products from the date of manufacture, RT1050, 3090-150, 3090P/C & A100 (Integrated Wiegand). General RMA Procedure Product repair or replacement, or associated charges, will not be accepted under this warranty unless prior authorization from Adams Rite has been given. Upon receipt of products returned for repair or replacement, Adams Rite will determine whether products qualify for repair or replacement under this warranty. Adams Rite has no liability to pay any costs of repair performed by anyone other than qualified personnel authorized by Adams Rite prior to the work being done. Written notice of a product or component part believed to be defective as covered by this warranty should be sent to Adams Rite, 10027 S. 51st Street, Suite 102, Phoenix, Arizona 85044 or customer.care@assaabloy.com and should include your name and address, an identification of the product or component part and a brief description of the defect. Notice of a product or component part believed to be defective as covered by this warranty may also be accepted over the telephone by Adams Rite, 800.872.3267 CUSTOMER CARE FORM (CCF) Upon receipt of such notice, if the customer has an account with Adams Rite or a valid credit card, an advance replacement product may be ordered whereby Adams Rite will ship a replacement product to the customer free of charge. If Adams Rite does not receive the original defective product from the customer within 60 days, Adams Rite will charge the customer’s account or credit card for the price of the advanced replacement product plus freight costs. Upon inspection of the returned product by Adams Rite, a decision will be made whether or not to charge the customer for the advanced replacement Adams Rite product. This decision will be made solely by Adams Rite in accordance with the provisions of these Terms. Obsolete products will not be accepted for return. Return Material Authorizations (RMAs) will be closed if the goods are not received within 60 days of issuance. 2 GENERAL INFO If Adams Rite receives original defective product from the customer within 60 days of RMA issuance, and if the customer is requesting credit for the defective material, the customer must reference the valid Adams Rite Purchase Order number upon which the product was originally ordered. If the original Purchase Order number is not available, at Adams Rite’s option a credit may be issued at the customer’s current cost. This decision will be made solely by Adams Rite in accordance with the provisions of these Terms. Transportation charges and insurance on all returned materials must be prepaid by the purchaser when merchandise is ordered in error. On goods returned for customer convenience, when the purchaser returns materials in compliance with these Terms which are accepted by Adams Rite, the purchaser may be issued a credit for 65% of the purchase price, with 35% charged by Adams Rite for handling and reprocessing. All refunds will be in the form of a credit. Cancellation As an industry leader, Adams Rite is committed to maintaining the highest standard of quality and ensuring strict compliance to industry codes. Adams Rite’s proud history of customer service and manufacturing agility allow quick response times to customer’s changing needs, which may include special orders or product modifications. Please be advised that all product modifications require special authorization to ensure the order fully meets customer’s expectations. Customers are asked to allow for an extended lead time on all special orders. Please note that at Adams Rite’s option, product modifications and other special orders cannot be changed, canceled, or returned once a ship date has been provided on an order acknowledgment by Adams Rite. Adams Rite prides itself on introducing new, industry-relevant, feature-rich products. Since new solutions will surpass the capabilities of older product lines, historical products may be subsequently discontinued. Every effort will be made to announce new product introductions as well as product discontinuations in a manner that allows customers advanced notice of these events. Once a product line is discontinued orders will be fulfilled in order of receipt, although Adams Rite cannot guarantee all orders can be filled. Repair services and spare parts for discontinued product lines will be available for some reasonable time period. Adams Rite reserves the right to replace discontinued product with an equivalent product as deemed by Adams Rite. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. TO THE EXTENT PERMITTED BY LAW, ALL IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THIS WARRANTY. ADAMS RITE IS A DIVISION OF HANCHETT ENTRY SYSTEMS, INC. HANCHETT ENTRY SYSTEMS, INC. SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. Canada Customers purchasing from Door Security Solutions Canada can find Canadian Terms and Conditions at www.assaabloy.ca/terms. Table of Contents General Info Adams Rite Limited Warranty 2 Table of Contents 3 Deadlocks 8300 Series Mortise Exit Device 42 8400 Series Mortise Exit Device 44 8475 Mortise Mid-Panel Exit Device 46 8500 Series Concealed Vertical Rod 48 8600 Series Concealed Vertical Rod 50 MS1850S Series MS® Deadlock 4 8675 Concealed Vertical Rod Mid-Panel 52 MS1850 Series MS® Accessories 6 8700 Series Rim Exit Device 54 8 8800 Series Rim Exit Device 56 2331 Heavy Duty Deadbolt 10 Accessories for Exit Devices 58 4189/4190 Flush Locksets 12 Electric Strikes 4430/4431 Flush Locksets 14 7100 Electric Strike ® 2190 Dual Force Interconnected Deadbolt/Deadlatch Deadlatches 60 Trim 4300 Steel Hawk Electrified Deadlatch 16 3080 Series Entry Trim 62 4781 Two-Point Deadlatch with Paddle 18 3090 eForce® Keyless Entry 64 4900 Heavy Duty Deadlatch 20 4550 MS® Deadlock Lever 66 4590 Deadlatch Paddle 68 ® Exit Devices 3100 Series Surface Vertical Rod Exit Device 22 4591 Deadlatch Paddle 70 3300 Series Mortise Exit Device 24 4600 Heavy Duty Deadlatch Handles 72 3600 Series Concealed Vertical Rod 26 Cylinders 3700 Series Rim Exit Device 28 3900/8900 Series Surface Concealed Vertical Rod 30 3889 Mullion 32 3890 Mullion 34 8099/8099M Dummy Pushbar 36 8100 Series Surface Vertical Rod 38 8200 Series Surface Vertical Rod 40 4024/4025/4026 Cylinder Pulls 74 Accessories & Cylinders Accessories & Cylinders 76 MS1850S SERIES MS® DEADLOCK 1 SPRING P/N 28-0064-03-MP SLOTTED HEAD SET SCREW 5 P/N S232B8-9/32N-631-MP OR P/N S232C08-05-631-MP OR P/N S232C8-15/32-631-MP 2 REQ'D 2 SPRING P/N 28-0064-02-MP 3 #10-32 X 1-3/4" FLAT HEAD SCREW FACEPLATE KIT 4 MS1850S 1X 6-7/8" P/N 24-0384-XXX-XXX 4 DEADLOCKS P/N S262-10R28-603-MP OR #10-32 X 1-7/8" FLAT HEAD SCREW P/N S262-10R30-603-MP OR #12-24 X 3/4" FLAT HEAD COMBO SCREW FOR ANSI MS P/N 91-0967-P 2 REQ’D MS1850S SERIES MS® DEADLOCK MS1850S Series MS® Deadlock ITEM PART NUMBER DESCRIPTION UNITS PKGD 1 28-0064-03-MP Spring Pkg. of 10 2 28-0064-02-MP Spring S262-10R28-603-MP 3 4 5 #10-32 × 1-3/4" flat head screw for 7/8", 31/32" backset 2019 PRICE $ 7.00 Pkg. of 10 $ 7.00 Pkg. of 10 $ $ 8.00 10.00 S262-10R30-603-MP #10-32 × 1-7/8" flat head screw for 1-1/8" backset Pkg. of 10 91-0967-P #12-24 × 3/4" flathead combo screw (ANSI hollow metal/wood doors) Each List 24-0384-010-XXX MS1850S flat faceplate kit for standard bolt, select 313, 335 or 628 finish Each List 24-0384-110-XXX MS1850S radius faceplate kit for standard bolt, select 313, 335 or 628 finish Each List 24-0384-210-XXX MS1850S LH bevel faceplate kit for standard bolt, select 313, 335 or 628 finish Each List 24-0384-310-XXX MS1850S RH bevel faceplate kit for standard bolt, select 313, 335 or 628 finish Each List 24-0384-410-XXX MS1850S radius with weatherstrip faceplate kit for standard bolt,select 313, 335 or 628 finish Each List 24-0384-020-XXX MS1850S flat faceplate kit for hookbolt and short bolt, select 313, 335 or 628 finish Each List 24-0384-120-XXX MS1850S radius faceplate kit for hookbolt and short bolt, select 313, 335 or 628 finish Each List 24-0384-220-XXX MS1850S LH bevel faceplate kit for hookbolt and short bolt, select 313, 335 or 628 finish Each List 24-0384-320-XXX MS1850S RH bevel faceplate kit for hookbolt and short bolt, select 313, 335 or 628 finish Each List 24-0384-420-XXX MS1850S radius with weatherstrip faceplate kit for hookbolt and short bolt, select 313, 335 or 628 finish Each List S232B8-9/32N-631-MP #8-32 × 9/32" slotted set screw for 7/8" backset Pkg. of 10 $ 11.00 11.00 21.00 S232C08-05-631-MP #8-32 × 5/16" slotted head screw for 31/32" backset Pkg. of 10 $ S232C8-15/32-631-MP #8-32 × 15/32" slotted set screw for 1-1/8", 1-1/2" backset Pkg. of 10 $ NS 80-0180-5 Installation Sheet, MS1850S/MS1850A Each NS 80-0180-4 Installation Sheet, MS1850SN Each Email Only Email Only List = Refer to current pricelist NS = Not shown US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. MS1850 SERIES MS® ACCESSORIES 15 16 1 HEADER STRIKE 4085 HEADER BOLT 7 #6 X 3/8" FLAT HEAD SELF-TAPPING SCREW P/N S230-06R06-603-MP 12 P/N 25-0071 2 #10-32 X 5/16" FLAT HEAD SCREW P/N S266-10R05-XXX-MP 4 REQ’D 3 #6-32 X 5/8" CAP SCREW P/N S242A06-10-MP SPIDER 6 P/N 25-0062-01-MP ADJUSTABLE STUD 5 P/N 25-0318 13 UPPER ARM 22 P/N 22-0757 OR P/N 22-0758 OR P/N 22-0759 4016 HEADER BOLT #10-32 X 1/2" 23 UPPER 8 FLAT HEAD SCREW P/N S26210R08-603-MP 4 REQ’D ARM PIN P/N 31-0363N 18 PIN FOR STANDARD 4 GUIDE MS LOCK P/N 26-0138-01 19 FOR 2-POINT MS LOCK P/N 26-0137-02 BRACKET P/N 22-0157 10 4089 EXIT INDICATOR 11 ROLL PIN BOX STRIKE P/N 4001 ADAPTOR ARM 17 P/N 22-0282 P/N P170-05-14-MP 12 ROD & BOLT ASS’Y 20 #8-32 X 3/8" FLAT HEAD SCREW P/N S227-08R06-603-MP 2 REQ’D P/N 31-0278-18 ARMORED STRIKE 9 P/N MS4002 SNAP BUSHING 16 P/N 25-0036-MP 4000 SERIES STRIKES BOLT GUIDE ASS’Y 15 P/N 41-0827-02-IP 4015 THRESHOLD BOLT 13 #10-32 X 5/16" FLAT HEAD SCREW P/N S266-10R05N-603-MP 2 REQ’D STRIKE 14 P/N 4005 THIS DOOR TO REMAIN UNLOCKED DURING BUSINESS HOURS 21 DOOR HEADER SIGN (AS SHOWN) P/N 20-0255-IP OR DOOR HEADER SIGN (....BUIDLING IS OCCUPIED) P/N 20-0256-IP 6 DEADLOCKS MS1850 SERIES MS ACCESSORIES ® MS1850 Series MS® Accessories ITEM PART NUMBER DESCRIPTION UNITS PKGD 2019 PRICE Header strike Each $ Pkg. of 10 $ Pkg. of 10 $ Pkg. of 10 $ 6.00 Each $ 6.00 $ 6.00 4085 Header Bolt 1 2 3 4 25-0071 S266-10R05N-119-MP S266-10R05N-603-MP S242A06-10-MP 22-0157 #10-32 × 5/16" flat head screw, 119 finish #10-32 × 5/16" flat head screw, 603 finish #6-32 × 5/8" cap screw Guide bracket 13.00 11.00 5 25-0318 Adjustable stud Each 6 25-0062-01-MP Spider Pkg. of 10 7 S230-06R06-603-MP #6-32 × 3/8" flat head self-tapping screw Pkg. of 10 $ $ 5.00 22.00 6.00 4000 Series Strikes 7.00 8 S262-10R08-603-MP #10-32 × 1/2" flat head screw Pkg. of 10 $ 9 MS4002 Armored strike, select 313, 335 or 628 finish Each List 10 4001 Box strike, select 313, 335 or 628 finish Each List 4015 Threshold Bolt 8.00 11 P170-05-14-MP Roll pin Pkg. of 10 12 31-0278-18 Rod and bolt assembly, 4016 (cylinder height 53" max) Each $ 13 S266-10R05N-603-MP #10-32 × 5/16" flat head screw, 603 finish Pkg. of 10 $ 14 4005 Strike for 4015 Threshold Bolt Each List 15 41-0827-02-IP Bolt guide assembly kit Each $ 16 17 25-0036-MP 22-0282 $ 26.00 11.00 9.00 Pkg. of 10 $ 19.00 Adaptor arm, 4015, 1870, 1870HM, MS1837, 1877 Each $ 31.00 Pin for standard MS deadlock Each $ 5.00 Each $ 6.00 3.00 Snap bushing for 4016 Header Bolt 4089 Exit Indicator 18 19 26-0138-01 26-0137-02 Pin for MS two-point (MS deadlock × 4015 configuration) 20 S227-08R06-603-MP #8-32 × 3/8" flat head screw Pk. of 10 $ 21 20-0255-IP Header sign (…DURING BUSINESS HOURS) Each List 20-0256-IP Header sign (…BUILDING IS OCCUPIED) Each List 22-0757 Upper arm 1-1/8" backset Each $ 30.00 22-0758 Upper arm 1-1/2" backset Each $ 30.00 22-0759 Upper arm 31/32" backset Each $ 30.00 31-0363N Upper arm pin assembly Each 4016 Header Bolt 22 23 List = Refer to current pricelist US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. $ 6.00 2190 Dual Force® INTERCONNECTED DEADBOLT/DEADLATCH 1 INSIDE TRIM COVER KIT P/N 91-0201-XXX-IP 2 FACEPLATE KIT 2290 P/N 91-0266-04-XXX-IP 3 FACEPLATE KIT 2190 P/N 91-0266-01-XXX-IP 4 LEVER KITS STANDARD P/N 91-0917-0X0-XXX-IP OR DESIGNER P/N 91-0917-MXX-XXX-IP CURVED ROUND INSIDE TRIM 9 HARDWARE KIT P/N 91-0202-01-IP OUTSIDE TRIM 8 HARDWARE KIT P/N 91-0202-02-IP STANDARD FLAT STRIKE 7 P/N 2101-01-XXX OR STANDARD RADIUS STRIKE P/N 2101-02-XXX 8 DEADLOCKS SQUARE 6 STANDARD FLAT STRIKE P/N 2206-01-XXX 5 OUTSIDE TRIM COVER KIT P/N 91-0200-XXX-IP 2190 Dual Force® INTERCONNECTED DEADBOLT/DEADLATCH 2190 Dual Force® Interconnected Deadbolt/Deadlatch ITEM 1 2 3 PART NUMBER List 91-0266-04-628-IP Faceplate kit for 2290, 628 finish Each List 91-0266-01-313-IP Faceplate kit for 2190, 313 finish Each List 91-0266-01-628-IP Faceplate kit for 2190, 628 finish Each 91-0197-010-10B-IP Curved lever kit, 10B (613) finish Each $ 82.00 91-0197-010-US32D-IP Curved lever kit, US32D (630) finish Each $ 92.00 Each $ 92.00 Each $ 82.00 Each $ 92.00 92.00 Round lever kit, 10B (613) finish Round lever kit, US32D (630) finish Square lever kit, 10B (613) finish List 91-0197-030-US32D-IP Square lever kit, US32D (630) finish Each $ 91-0197-MD0-10B-IP Designer lever kit, Centro Series MD, 10B (613) finish Each $ 129.00 91-0197-MD0-US32D-IP Designer lever kit, Centro Series MD, US32D (630) finish Each $ 144.00 91-0197-ME0-10B-IP Designer lever kit, Aventura Series ME, 10B (613) finish Each $ 144.00 91-0197-ME0-US32D-IP Designer lever kit, Aventura Series ME, US32D (630) finish Each $ 144.00 91-0197-MG0-10B-IP Designer lever kit, Aventura Series MG, 10B (613) finish Each $ 144.00 91-0197-MG0-US32D-IP Designer lever kit, Aventura Series MG, US32D (630) finish Each $ 144.00 Each $ 144.00 Each $ 144.00 Each $ 144.00 Each $ 144.00 Each $ 144.00 144.00 91-0197-MI0-10B-IP 91-0197-MI0-US32D-IP 91-0197-MJ0-US32D-IP 91-0197-MN7-10B-IP Designer lever kit, Aventura Series MI, 10B (613) finish Designer lever kit, Aventura Series MI, US32D (630) finish Designer lever kit, Centro Series MJ, 10B (613) finish Designer lever kit, Centro Series MJ, US32D (630) finish Designer lever kit, Odeon Series MN, left hand, 10B (613) finish 91-0197-MN7-US32D-IP Designer lever kit, Odeon Series MN, left hand, US32D (630) finish Each $ 91-0197-MN8-10B-IP Designer lever kit, Odeon Series MN, right hand, 10B (613) finish Each $ 144.00 91-0197-MN8-US32D-IP Designer lever kit, Odeon Series MN, right hand, US32D (630) finish Each $ 144.00 91-0197-MV7-10B-IP Designer lever kit, Odeon Series MV, left hand, 10B (613) finish Each $ 144.00 91-0197-MV7-US32D-IP Designer lever kit, Odeon Series MV, left hand, US32D (630) finish Each $ 144.00 91-0197-MV8-10B-IP Designer lever kit, Odeon Series MV, right hand, 10B (613) finish Each $ 144.00 91-0197-MV8-US32D-IP Designer lever kit, Odeon Series MV, right hand, US32D (630) finish Each $ 144.00 Each $ 144.00 Each $ 144.00 Each $ 64.00 $ 64.00 91-0197-MW0-10B-IP 91-0197-MW0-US32D-IP 8 58.00 Each Each 91-0197-MJ0-10B-IP 7 $ Inside trim cover kit, US32D finish Faceplate kit for 2290, 313 finish 91-0197-030-10B-IP 6 2019 PRICE 91-0201-US32D 91-0197-020-US32D-IP 5 UNITS PKGD 91-0266-04-313-IP 91-0197-020-10B-IP 4 DESCRIPTION 91-0200-10B Designer lever kit, Aventura Series MW, 10B (613) finish Designer lever kit, Aventura Series MW, US32D (630) finish Outside trim cover kit, 10B (613) finish 91-0200-US32D Outside trim cover kit, US32D finish Each 2206-01-121 Standard flat strike with dust box, 2290, 121 finish Each List 2206-01-630 Standard flat strike with dust box, 2290, US32D (630) finish Each List 2101-01-121 Standard flat strike with dust box, 2190, 121 finish Each List 2101-01-630 Standard flat strike with dust box, 2190, US32D (630) finish Each List 2101-02-121 Standard radius strike with dust box, 2190, 121 finish Each List 2101-02-630 Standard radius strike with dust box, 2190, US32D (630) finish Each 91-0202-02-IP Outside trim hardware kit, 2190 Each List $ 12.00 $ 10.00 9 91-0202-01-IP Inside trim hardware kit, 2190 Each NS 80-0180-410 Installation instructions Each Email Only NS 80-0180-411-01 Template — inside trim Each Email Only NS 80-0180-411-02 Template — outside trim Each Email Only List = Refer to current pricelist NS = Not shown US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. 2331 HEAVY DUTY DEADLOCK 1 STRIKE P/N 22-0032-XXX #6-32 X 3/16" FLAT HEAD 4 UNDERCUT SCREW P/N S235B06R03-605-MP 2 REQ’D 3 FACEPLATE P/N 22-0170-XXX 2 #8-32 X 5/8" SET SCREW P/N S232C8-15/32-631-MP 2 REQ’D 10 DEADLOCKS 2331 HEAVY DUTY DEADLOCK 2331 Heavy Duty Deadlock ITEM 1 2 3 4 NS PART NUMBER DESCRIPTION UNITS PKGD 22-0032-121 Strike, 121 finish Each List 22-0032-605 Strike, US3 (605) finish Each List 22-0032-625 Strike, US26 (625) finish Each List 22-0032-626 Strike, US26D (626) finish Each S232C8-15/32-631-MP #8-32 × 15/32" slotted set screw Pkg. of 10 22-0170-121 Faceplate kit with screws, 121 finish Each List 22-0170-605 Faceplate kit with screws, US3 (605) finish Each List 22-0170-626 Faceplate kit with screws, US26D (626) finish Each List S235B06R03-605-MP #6-32 × 3/16" flat head undercut screw Pkg. of 10 $ 4066-03-130 Mortise thumbturn, 130 finish Each List 4066-03-313 Mortise thumbturn, 313 finish Each List 4066-03-335 Mortise thumbturn, 335 finish Each List List = Refer to current pricelist NS = Not shown US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. 2019 PRICE List $ 11.00 7.00 4189/4190 FLUSH LOCKSETS 1 #6-32 X 1/4" FLAT HEAD SCREW #6-32 X 3/8" TRUSS 8 HEAD SCREW P/N S234-06R06N-603-MP MS 1848 P/N S235-06R04N-603-MP OR MS 1847 P/N S235C06R04-630-MP 2 REQ’D INTERIOR MS 1848-09 INSERT CYLINDER 7 P/N 29-0442-02 2 INTERIOR ESCUTCHEON OPERATOR P/N 41-0942-XX-XXX-IB EXTERIOR ESCUTCHEON ASS’Y 6 4189 P/N 23-0065-01-XXX-IB OR 4190 P/N 41-0943-1-XXX-01-IB 3 FLUSH LOCKSET KNOB P/N 25-0094 4 #8-32 FLAT HEAD SCREW P/N S227-08RXX-603-MP 2 REQ’D 5 BARBED STUD P/N P191-10-06-MP 12 DEADLOCKS 4189/4190 FLUSH LOCKSETS 4189/4190 Flush Locksets ITEM 1 PART NUMBER DESCRIPTION UNITS PKGD S235-06R04N-603-MP #6-32 × 1/4" flat head screw Pkg. of 10 $ S235C06R04-630-MP #6-32 × 1/4" flat head screw Pkg. of 10 $ 41-0942-01-119-IB Interior escutcheon operator, 4189, 1" — 1-5/8" door, 119 finish Each $ 44.00 Interior escutcheon operator, 4189, 1" — 1-5/8" door, 121 finish Each $ 44.00 Each $ 44.00 Each $ 50.00 Each $ 63.00 Each $ 63.00 Each $ 68.00 Each $ 75.00 $ 75.00 41-0942-02-119-IB 41-0942-09-119-IB 41-0942-09-130-IB 41-0942-10-119-IB 41-0942-11-119-IB 3 4 5 NS Interior escutcheon operator, 4190, 1" — 1-3/8" door, 119 finish Interior escutcheon operator, 4190, 1" — 1-3/8" door, 130 finish Interior escutcheon operator, 4190, 1-7/16" — 1-5/8" door Interior escutcheon operator, 4190, 1-11/16" — 2" door, 119 finish Interior escutcheon operator, 4190, 1-11/16" — 2" door, 130 finish Each Knob Each $ 5.00 S227-08R12-603-MP #8 × 3/4" flat head self-tapping screw Pkg. of 10 $ 5.00 S227-08R16-603-MP #8 × 1" flat head self-tapping screw Pkg. of 10 $ 6.00 S227-08R22-603-MP #8 × 1-3/8" flat head self-tapping screw Pkg. of 10 $ 6.00 P191-10-06-MP Barbed stud Pkg. of 10 $ 23-0065-01-119IB Exterior escutcheon, 4189, 4195, 119 finish Each $ 33.00 Each $ 33.00 Each $ 33.00 Each $ 63.00 Each $ 63.00 Each $ 32.00 23-0065-01-130IB 41-0943-1-130-01-IB 8 Interior escutcheon operator, 4189, 1-11/16" — 2" door 41-0942-11-130-IB 41-0943-1-119-01-IB 7 Interior escutcheon operator, 4189, 1" — 1-5/8" door, 130 finish 25-0094 23-0065-01-121IB 6 6.00 12.00 41-0942-01-121-IB 41-0942-01-130-IB 2 2019 PRICE 29-0442-02 Exterior escutcheon, 4189,4195, 121 finish Exterior escutcheon, 4189, 4195, 130 finish Exterior escutcheon, 4190 Schlage “C”, 119 finish Exterior escutcheon, 4190 Schlage “C”, 130 finish Insert cylinder with 2 keys, Schlage “C” keyway 13.00 $ 9.00 S234-06R06N-603-MP #6-32 × 3/8" truss head screw Pkg. of 10 23-0066-02-119IB Interior Escutcheon, 4195, 119 finish Each $ 32.00 23-0066-02-121IB Interior Escutcheon, 4195, 121 finish Each $ 32.00 23-0066-02-130IB Interior Escutcheon, 4195, 130 finish Each $ 32.00 US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. 4430/4431 FLUSH LOCKSETS 1 #6-32 X 1/4" FLAT HEAD SCREW MS 1848 P/N S235-06R04N-603-MP OR MS 1847 P/N S235C06R04-630-MP 2 REQ'D INTERIOR MS 1848-09 EXTERIOR ESCUTCHEON 9 4430 P/N 25-0087-IB OR 4431 P/N 41-0405-00-01-IB 2 INTERIOR ESCUTCHEON OPERATOR P/N 41-0397-XX-IB CYLINDER RETAINER 8 P/N 22-0212 #8 X 3/8" SELF-TAPPING 7 SCREW P/N S256C08R06-MP INSERT CYLINDER 6 P/N 29-0461-03-01 3 FLUSH LOCKSET KNOB #6 X 3/8" PAN HEAD SCREW 5 SELF-TAPPING P/N S280C06R06-MP P/N 25-0077 #8 FLAT HEAD SCREW 4 SELF-TAPPING P/N S254C08R16-MP OR P/N S254-08R22-603-MP 2 REQ’D 14 DEADLOCKS 4430/4431 FLUSH LOCKSETS 4430/4431 Flush Locksets ITEM 1 2 PART NUMBER 4 5 6 UNITS PKGD 2019 PRICE S235-06R04N-603-MP #6-32 × 1/4" flat head screw Pkg. of 10 $ S235C06R04-630-MP #6-32 × 1/4" flat head screw Pkg. of 10 $ 6.00 12.00 41-0397-01-IB Interior escutcheon operator, 1" — 1-5/16" door Each $ 49.00 41-0397-02-IB Interior escutcheon operator, 1-3/8" — 1-5/8" door Each $ 49.00 Each $ 49.00 41-0397-06-IB 3 DESCRIPTION 25-0077 S254C08R16-MP S254-08R22-603-MP S280C06R06-MP 29-0461-01-01 Interior escutcheon operator, 1-3/4" — 2" door Knob #8 × 1" flat head self-tapping screw #8 × 1-3/8" flat head self tapping screw #6 × 3/8" pan head self-tapping screw Insert cylinder with 2 keys, Schlage “C” keyway Each $ Pkg. of 10 $ 5.00 12.00 Pkg. of 10 $ 9.00 Pkg. of 10 $ 6.00 Each $ 32.00 7 S256C08R06-MP #8 × 3/8" self-tapping screw Pkg. of 10 $ 8 22-0212 Cylinder retainer Each $ 9.00 5.00 15.00 25-0087-IB Exterior escutcheon for 4430 Each $ 41-0405-00-01-IB Exterior escutcheon, 4431 Schlage “C” keyway Each $ NS 25-0088-IB Interior Escutcheon, 4432 Each $ 15.00 NS 25-0087-Ib Exterior Escutcheon, 4432 Each $ 15.00 9 US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. 49.00 4300 Steel Hawk® ELECTRIFIED DEADLATCH 1 FACEPLATE KIT P/N 91-4300-01-XXX-IP CAM PLUG 6 P/N 4581-01-IP 5 FLUSH MOUNT RADIUS STRIKE P/N 4901-02-XXX 4 FLUSH MOUNT FLAT STRIKE P/N 4901-01-XXX 3 SHORT BOX STRIKE RADIUS P/N 4902-02-XXX 2 SHORT BOX STRIKE FLAT P/N 4902-01-XXX 16 DEADLATCHES 4300 Steel Hawk® ELECTRIFIED DEADLATCH 4300 Steel Hawk® Electrified Deadlatch ITEM PART NUMBER DESCRIPTION UNITS PKGD 2019 PRICE 91-4300-01-313-IP Faceplate kit, 313 finish Each $ 21.00 91-4300-01-335-IP Faceplate kit, 335 finish Each $ 21.00 91-4300-01-628-IP Faceplate kit, 628 finish Each $ 21.00 4902-01-119 Short box strike, flat with dust box, mounting plate, 119 finish Each List 4902-01-121 Short box strike, flat with dust box, mounting plate, 121 finish Each List 4902-01-630 Short box strike, flat with dust box, mounting plate, US32D (630) finish Each List 4902-02-119 Short box strike, radius with dust box, mounting plate, 119 finish Each List 4902-02-121 Short box strike, radius with dust box, mounting plate, 121 finish Each List 4902-02-630 Short box strike, radius with dust box, mounting plate, US32D (630) finish Each List 4901-01-119 Flush mount flat strike mortised with dust box, 119 finish Each List 4901-01-121 Flush mount flat strike mortised with dust box, 121 finish Each List 4901-01-630 Flush mount flat strike mortised with dust box, US32D (630) finish Each List 4901-02-119 Flush mount radius strike mortised with dust box, 119 finish Each List 4901-02-121 Flush mount radius strike mortised with dust box, 121 finish Each List 4901-02-630 Flush mount radius strike mortised with dust box, US32D (630) finish Each List 6 4581-01 Cam plug 1-3/4" Each List NS 4304-121 Surface mount strike, 121 finish Each List 4304-630 Surface mount strike, US32D (630) finish Each List 80-0180-421 Installation instructions Each Email Only 1 2 3 4 5 NS List = Refer to current pricelist NS = Not shown US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. 4781 TWO-POINT DEADLATCH WITH PADDLE STRIKE PLATE ASS’Y 21 P/N 31-0945-MP* ACTUATOR ASS’Y 20 P/N 31-0944-IP #6-32 X 1/2" 19 CAP SCREW P/N S242A06-08-MP 2 REQ'D 1 #10-32 X 5/16" FLAT HEAD SCREW P/N S266-10R05N-XXX-MP 5 REQ’D 2 RIVNUT TOOL KIT ASS’Y P/N 41-0975-02-IP 3 ESCUTCHEON ASS’Y P/N 41-0123-XX-IP SPIDER 18 P/N 25-0062-01-MP 4 DOGGING KEY P/N 29-0481-MP 5 DOGGING SCREW CVR FINAL ASS’Y 17 P/N 41-0935 *P/N 31-0079-MP 6 DRIVE SHAFT *P/N 26-0413 7 PAN HEAD SCREW #10-24 X 1-1/2" *P/N S277-10R24-603-MP 2 REQ’D BOLT GUIDE BUSHING 16 P/N 25-0506-MP SHAFT 13 *P/N 26-0055 12 DRIVER SCREW *P/N 26-0383N-MP LOWER BOLT GUIDE ASS’Y 15 P/N 31-0964-IP 8 LABEL P/N 20-0099 3/8"-24 SET SCREW 14 *P/N 26-0398N-MP 10 SPRING CLIP 11 RETURN SPRING KIT *P/N 91-0060 *P/N 28-0070-MP 2 REQ’D * INCLUDED IN ESCUTCHEON ASS’Y P/N 41-0123-XX-IP OR AVAILABLE SEPERATLY 18 DEADLATCHES 9 PADDLE ASS’Y P/N 41-0119-XXX 4781 TWO-POINT DEADLATCH WITH PADDLE 4781 Two-Point Deadlatch with Paddle ITEM 1 2 PART NUMBER DESCRIPTION UNITS PKGD 2019 PRICE 13.00 S266-10R05N-119-MP #10-32 × 5/16" flat head screw, 119 finish Pkg. of 10 $ S266-10R05N-603-MP #10-32 × 5/16" flat head screw, 603 finish Pkg. of 10 $ 41-0975-02 Rivnut tool kit assembly Each $ 41-0123-02-IP Escutcheon assembly, “PUSH” to left, comes complete with items 13-16, 19-21, 23 below Each $ 124.00 41-0123-04-IP Escutcheon assembly, “PUSH” to right, comes complete with items 13-16, 19-21, 23 below Each $ 124.00 3 11.00 13.00 4 29-0481-MP Dogging key Pkg. of 10 $ 33.00 5 31-0079-MP Dogging screw Pkg. of 10 $ 29.00 6 26-0413 Drive shaft Each $ 7 S277-10R24-603-MP #10-24 × 1-1/2" pan head screw Pkg. of 10 $ 8 20-0099 “PUSH" & "PULL” indicator label Each 41-0119-313 9 41-0119-335 41-0119-628 10 11 12 28-0070-MP 91-0060 26-0383N-MP Paddle assembly, 313 finish Paddle assembly, 335 finish Paddle assembly, 628 finish Spring clip Return spring kit, includes all four springs Driver screw 13.00 10.00 $ 5.00 Each $ 63.00 Each $ 63.00 Each $ 63.00 Pkg. of 10 $ 6.00 Pkg. of 4 $ 9.00 Pkg. of 10 13 26-0055 Shaft Each 14 26-0398N-MP 3/8"-24 set screw Pkg. of 10 $ 75.00 $ $ 5.00 28.00 15 31-0964 Lower bolt guide assembly Each $ 9.00 16 25-0506-MP Bolt guide bushing Pkg. of 10 $ 9.00 17 41-0935 CVR final assembly, complete with bolts Each $ 18 25-0062-01-MP Spider Pkg. of 10 $ 19 S242A06-08-MP #6-32 × 1/2" cap screw, rod piercing Pkg. of 10 $ Each $ 34.00 Each $ 22.00 20 21 31-0944 31-0945 Actuator, top assembly Strike plate assembly $ 173.00 22.00 12.00 207.00 31-0945-MP Strike plate assembly multipack Pkg. of 10 NS 80-0180-128 Instruction sheet, 4781 Each Email Only NS 80-0180-133 Dogging instruction sheet, 4781 Each Email Only NS = Not shown US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. 4900 HEAVY DUTY DEADLATCH #8-32 × 5/16" 1 SCREWS S232C08-05-631-MP 5 FLUSH MOUNT RADIUS STRIKE 4901-02-XXX 4 FLUSH MOUNT FLAT STRIKE 4901-01-XXX 3 SHORT BOX STRIKE RADIUS 4902-02-XXX 2 SHORT BOX STRIKE FLAT 4902-01-XXX 20 DEADLATCHES 4900 HEAVY DUTY DEADLATCH 4900 Heavy Duty Deadlatch ITEM 1 2 3 4 5 NS NS PART NUMBER DESCRIPTION UNITS PKGD S232C08-05-631-MP #8-32 × 5/16" slotted head screw for 31/32" backset Pkg. of 10 4902-01-119 Short box strike, flat with dust box, mounting plate, 119 finish Each List 4902-01-121 Short box strike, flat with dust box, mounting plate, 121 finish Each List 4902-01-630 Short box strike, flat with dust box, mounting plate, US32D (630) finish Each List 4902-02-119 Short box strike, radius with dust box, mounting plate, 119 finish Each List 4902-02-121 Short box strike, radius with dust box, mounting plate, 121 finish Each List 4902-02-630 Short box strike, radius with dust box, mounting plate, US32D (630) finish Each List 4901-01-119 Flush mount flat strike mortised with dust box, 119 finish Each List 4901-01-121 Flush mount flat strike mortised with dust box, 121 finish Each List 4901-01-630 Flush mount flat strike mortised with dust box, US32D (630) finish Each List 4901-02-119 Flush mount radius strike mortised with dust box, 119 finish Each List 4901-02-121 Flush mount radius strike mortised with dust box, 121 finish Each List 4901-02-630 Flush mount radius strike mortised with dust box, US32D (630) finish Each List 4506-02-630 Strike for use with 4920AN Each 91-4900-01-628 Loose parts kit, 4900 Each $ 26.00 91-4920-02-628 Loose parts kit, 4920AN Each $ 26.00 List = Refer to current pricelist NS = Not shown US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. 2019 PRICE $ 11.00 List 3100 Series SURFACE VERTICAL ROD EXIT DEVICE 1 STRIKE PLATE ASS’Y P/N 31-0202 2 ACTUATOR ASS’Y P/N 31-0331 * #10-24 X 1" PAN HEAD MACHINE SCREW 4 REQ'D 3 UPPER COVER P/N 22-0332-0X-XXX BINDER POST 17 P/N 26-0584-652-MP 4 REQ’D 4 ROD GUIDE COVER P/N 24-0003-01-XXX-IP OR P/N 24-0031-XXX OR P/N 24-0033-XXX 2 REQ'D UPPER ROD ASS’Y 16 P/N 31-0333-01 5 * #10 X 1-1/4" PAN HEAD SCREW SELF-TAPPING 13 REQ'D SVR FINAL ASS’Y 15 P/N 41-0235-01 OR P/N 41-0333-01 (3100T) METAL END CAP P/N 41-0903-IP * #10-32 X 5/8" SCREW SELF-TAPPING 4 REQ'D MOLDING CLIP 14 P/N 25-0008 2 REQ'D 6 PUSH BAR ASS’Y * #6-32 X 1/4" PAN HEAD SCREW * LOCK WASHER SPRING METAL END CAP ASS’Y 13 P/N 41-0902-04-IP *#10-24 X 1" PAN HEAD MACHINE SCREW LOWER ROD ASS’Y 12 P/N 31-0192-02-P LOWER BOLT GUIDE ASS’Y 11 P/N 31-0175-P BOLT GUIDE BUSHING 10 P/N 25-0284-MP LOWER HOUSING 9 P/N 23-0059 7 LOWER COVER P/N 22-0333-0X-XXX 8 STRIKE P/N 22-0125-IP * #6-32 X 1/4" PAN HEAD SCREW 2 REQ’D * INCLUDED IN HARDWARE PACK P/N 91-0831-01-XXX 22 EXIT DEVICES 3100 Series SURFACE VERTICAL ROD EXIT DEVICE 3100 Series Surface Vertical Rod Exit Device (Including 3100T) ITEM PART NUMBER DESCRIPTION UNITS PKGD 2019 PRICE 1 31-0202 Strike plate assembly Each $ 33.00 2 31-0331 Actuator assembly Each $ 50.00 3 22-0332-01-313 Upper cover, 313 finish Each $ 32.00 22-0332-01-335 Upper cover, 335 finish Each $ 32.00 22-0332-01-628 Upper cover, 628 finish Each $ 32.00 Each $ 68.00 Each $ Each $ Each $ Each $ 68.00 Each $ 68.00 $ 68.00 22-0332-02-605 Upper cover, US3 (605) finish 22-0332-02-606 Upper cover, US4 (606) finish 22-0332-04-629 Upper cover, US32 (629) finish 22-0332-04-630 Upper cover, US32D (630) finish 24-0003-01-313 Rod guide cover, 313 finish 24-0003-01-335 4 5 6 Rod guide cover, 335 finish 76.00 63.00 57.00 24-0003-01-628 Rod guide cover, 628 finish Each 24-0031-605 Rod guide cover, US3 (605) finish Each $ 207.00 24-0031-606 Rod guide cover, US4 (606) finish Each $ 207.00 24-0033-629 Rod guide cover, US32 (629) finish Each $ 112.00 24-0033-630 Rod guide cover, US32D (630) finish Each $ 112.00 41-0903 End cap assembly, hinge end — metal Each $ 3100 Push Bar — 313, 335, 628 finish Push bar assembly: order by exit device Series (3100), door opening width and 313, 335, or 628 finish Each $ 3100 Push Bar — 630 finish Push bar assembly: order by exit device Series (3100), door opening width and US32D (630) finish Each $ 382.00 3100 Push Bar — 605, 606, 629 finish Push bar assembly: order by exit device Series (3100), door opening width, and US3 (605), US4 (606), US32 (629) finishes Each $ 432.00 22-0333-01-313 Lower cover, 313 finish Each $ 32.00 23.00 143.00 32.00 22-0333-01-628 Lower cover, 628 finish Each $ 22-0333-02-605 Lower cover, US3 (605) finish Each $ 64.00 22-0333-02-606 Lower cover, US4 (606) finish Each $ 64.00 22-0333-04-629 Lower cover, US32 (629) finish Each $ 64.00 22-0333-04-630 Lower cover, US32D (630) finish Each $ 64.00 8 22-0125 Strike (ANSI) Each $ 22.00 9 23-0059 Lower housing Each 10 25-0284-MP Bolt guide bushing Pkg. of 10 7 11 12 13 14 15 31-0175-P 31-0192-02-P 41-0902-04-IP 25-0008 Lower bolt guide assembly Lower rod assembly End cap assembly, nose end — metal Molding clip 201.00 $ $ 9.00 18.00 Each $ Each $ 38.00 Each $ 28.00 $ Each 41-0235-01 SVR final assembly, complete with rods Each $ 41-0333-01 SVR final assembly, complete with rod for top rod devices Each $ 9.00 247.00 190.00 16 31-0333-01 Upper rod assembly Each $ 63.00 17 26-0584-652-MP Binder post with screws 2-Pack $ 26.00 91-0831-01-335 Hardware pack for 313, 335 finishes Each $ * 91-0831-01-605 Hardware pack for US3 (605), US4 (606) finishes Each $ 91-0831-01-630 Hardware pack for 628, US32 (629), US32D (630) finishes Each $ NS 80-0180-86-01 Template, 3100 Each Email Only NS 80-0180-81 Installation sheet, 3100 Each Email Only NS 80-0180-481 Top rod, metal door installation sheet, 3100T Each Email Only NS 80-0180-483 Top rod, wood door installation sheet, 3100W Each Email Only NS = Not shown Note: Consult factory for doors over 54" above push bar centerline. US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. 12.00 19.00 10.00 3300 Series MORTISE EXIT DEVICE 1 #12-24 X 3/4" FLAT HEAD COMBO SCREW P/N 91-0833-02 2 STRIKE P/N 22-0398-01-630 * #10-32 X 5/8" SCREW SELF-TAPPING 4 REQ'D 3 METAL END CAP CAM 9 P/N 22-0669 P/N 41-0903-IP 4 PUSH BAR ASS’Y * #10 X 1-1/4" PAN HEAD SCREW SELF-TAPPING 4 REQ’D LATCH ASS’Y 8 P/N 41-0296-XX-P * #10 X 1/2" FLAT HEAD SCREW SELF-TAPPING 2 REQ’D FACEPLATE KIT 7 P/N 24-0015-020-XXX 1 #6 HEX HD CAM SCREW 6 P/N 26-0217N-MP OR CAM RETAINER RING P/N R603-31-MP 5 METAL END CAP ASS’Y P/N 41-0902-05-IP * INCLUDED IN HARDWARE PACK P/N 91-0833-01 24 EXIT DEVICES 3300 Series MORTISE EXIT DEVICE 3300 Series Mortise Exit Device ITEM PART NUMBER DESCRIPTION UNITS PKGD 2019 PRICE 6.00 1 91-0833-02 #12-24 × 3/4" flat head combo screw Each 2 22-0398-01-630 Strike plate Each $ 28.00 3 41-0903 End cap assembly, hinge end — metal Each $ 23.00 3300 Push Bar — 313, 335, 628 finish Push bar assembly: order by exit device Series (3300), door opening width and 313, 335, or 628 finish Each $ 3300 Push Bar — 630 finish Push bar assembly: order by exit device Series (3300), door opening width and US32D (630) finish Each $ 382.00 3300 Push Bar — 605, 606, 629 finish Push bar assembly: order by exit device Series (3300), door opening width and US3 (605), US4 (606), US32 (629) finishes Each $ 432.00 41-0902-05 End cap assembly, nose end — metal Each $ 15.00 15.00 4 5 6 7 8 9 * $ 143.00 28.00 26-0217N-MP #6 hex head cam screw Pkg. of 10 $ R603-31-MP Cam retainer ring (past production) Pkg. of 10 $ 24-0015-020-335 Faceplate kit with screws, 335 finish Each 24-0015-020-628 Faceplate kit with screws, 628 finish Each 41-0296-01-P Latch assembly (LHR) Each $ 456.00 41-0296-02-P Latch assembly (RHR) Each $ 456.00 22-0672 Cam (latchbolt retract), screw attachment Each List List $ $ 5.00 10.00 91-0833-01 Hardware pack Each NS 80-0180-122-01 Device template, 3300 Each Email Only NS 80-0180-122-02 Strike template, 3300 Each Email Only NS 80-0180-83 Installation sheet, 3300 Each Email Only List = Refer to current pricelist NS = Not shown US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. 3600 Series CONCEALED VERTICAL ROD STRIKE PLATE ASS’Y 11 P/N 31-0202 ACTUATOR ASS’Y 10 P/N 31-0579-02-IP 1 SPIDER P/N 25-0062-01-MP #6-32 X 1/2" CAP SCREW 9 P/N S242A06-08-MP 2 REQ’D 2 CVR FINAL ASS’Y P/N 41-0224-P OR P/N 41-0339 3 METAL END CAP P/N 41-0903-IP *#10-32 X 5/16" FLAT HEAD UNDERCUT 5 REQ'D * #10-32 X 5/8" SCREW SELF TAPPING 4 REQ'D 4 PUSH BAR ASS’Y *#10 X 1-1/4" PAN HEAD SCREW SELF-TAPPING 2 REQ'D * #10-32 X 1/2" PAN HEAD MACHINE SCREW 2 REQ’D 5 METAL END CAP ASS’Y P/N 41-0902-05-IP 6 LOWER BOLT GUIDE ASS’Y P/N 31-0034 7 BOLT GUIDE BUSHING P/N 25-0506-MP STRIKE 8 P/N 22-0125-IP 26 EXIT DEVICES * INCLUDED IN HARDWARE PACK P/N 91-0833-01-603 3600 Series CONCEALED VERTICAL ROD 3600 Series Metal Door Concealed Vertical Rod (Including 3600T) ITEM 1 2 3 4 PART NUMBER DESCRIPTION UNITS PKGD 2019 PRICE 25-0062-01-MP Spider Pkg. of 10 $ 41-0224-P CVR final assembly, complete with bolts Each $ 41-0339 CVR final assembly, complete with bolt for top rod devices Each $ 41-0903 End cap assembly, hinge end — metal Each $ 3600 Push Bar — 313, 335, 628 finish Push bar assembly: order by exit device Series (3600), door opening width and 313, 335, or 628 finish Each $ 3600 Push Bar — 630 finish Push bar assembly: order by exit device Series (3600), door opening width and US32D (630) finish Each $ 382.00 3600 Push Bar — 605, 606, 629 finish Push bar assembly: order by exit device Series (3600), door opening width and US3 (605), US4 (606), US32 (629) finishes Each $ 432.00 22.00 161.00 179.00 23.00 143.00 28.00 5 41-0902-05 End cap assembly, nose end — metal Each $ 6 31-0034 Lower bolt guide assembly Each $ 7 25-0506-MP Bolt guide bushing Pkg. of 10 $ 8 22-0125 Strike (ANSI) Each $ 11.00 9.00 22.00 9 S242A06-08-MP #6-32 × 1/2" cap screw, rod piercing Pkg. of 10 10 31-0579-02 Top actuator assembly Each $ 11 31-0202 Strike plate assembly Each $ $ $ 12.00 112.00 33.00 * 91-0836-01-603 Hardware pack Each 14.00 NS 80-0180-87-01 Exit device template, 3600 Each Email Only NS 80-0180-87-02 Strike template, 3600 Each Email Only NS 80-0180-487-01 Exit device template, 3600T Each Email Only NS 80-0180-487-02 Strike template, 3600T Each Email Only NS 80-0180-84 Installation sheet, 3600 Each Email Only NS 80-0180-486 Installation sheet, 3600T Each Email Only NS = Not shown US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. 3700 Series RIM EXIT DEVICE 1 STRIKE SPACER P/N 22-0481-04-MP 4 REQ'D 2 STRIKE SPACER P/N 22-0481-03-MP 1 REQ’D 3 STRIKE PLUG P/N 25-0625-MP 2 REQ’D 4 STRIKE P/N 22-0430-IP 5 #10-32 X 3/4" FLATHEAD SCREWS P/N 91-0837-02 #10-32 X 5/8" SCREW * SELF TAPPING 4 REQ'D 6 METAL END CAP P/N 41-0903-IP CYLINDER PLATE 9 P/N 22-0480 REQ’D FOR WOOD DOOR ONLY 7 PUSH BAR ASS’Y * #10 X 1/2" ROUND HEAD SCREW SELF-TAPPING 2 REQ'D. METAL END CAP ASS’Y P/N 41-0902-03-IP 8 * #10 X 1-1/4" PAN HEAD SCREW SELF-TAPPING 4 REQ’D * INCLUDED IN HARDWARE PACK P/N 91-0837-01 28 EXIT DEVICES 3700 Series RIM EXIT DEVICE 3700 Series Rim Exit Device ITEM PART NUMBER DESCRIPTION UNITS PKGD 2019 PRICE 1 22-0481-04-MP Strike spacer Pkg. of 10 $ 23.00 2 22-0481-03-MP Strike spacer Pkg. of 10 $ 23.00 3 25-0625-MP Strike plug Pkg. Of 2 $ 4 22-0430 Strike Each $ Pkg. of 2 $ 5 6 7 91-0837-02 #10-32 × 3/4" flat head screws 12.00 11.00 6.00 23.00 41-0903 End cap assembly, hinge end — metal Each $ 3700 Push Bar — 313, 335, 628 finish Push bar assembly: order by exit device Series (3700), door opening width and 313, 335, or 628 finish Each $ 3700 Push Bar — 630 finish Push bar assembly: order by exit device Series (3700), door opening width and US32D (630) finish Each $ 382.00 3700 Push Bar — 605, 606, 629 finish Push bar assembly: order by exit device Series (3700), door opening width and US3 (605), US4 (606), US32 (629) finishes Each $ 432.00 143.00 28.00 8 41-0902-03 End cap assembly, latch end — metal Each $ 9 22-0480 Cylinder plate for wood door applications Each $ * 91-0837-01 Hardware pack Each $ NS 80-0180-124-01 Device template, 3700 Each Email Only NS 80-0180-124-02 Strike template, 3700 Each Email Only NS 80-0180-85 Installation sheet, 3700 Each Email Only 12.00 6.00 NS = Not shown US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. 3900/8900 Series SURFACE CONCEALED VERTICAL ROD 1 SUPPORT PLATE P/N 29-0630-XXX 2 STRIKE PLATE ASS’Y P/N 31-0202 3 TOP ACTUATOR ASS’Y P/N 31-0579-06-IP (3900) OR 31-0579-05-IP (8900) * #10-24 X 1" ROD ASS’Y 15 P/N 41-0337-IP PAN HEAD SCREW 2 REQ’D 4 MOUNTING CAP SPACER P/N 22-0585 #6-32 X 1/4" * PAN HEAD SCREW 5 METAL END CAP P/N 41-0903-IP * #10-32 X 5/8" SCREW UPPER COVER 14 P/N 22-0332-1X-XXX SELF TAPPING 4 REQ’D 6 PUSH BAR ASS’Y * #10 X 1-1/4" PAN HEAD SCREW SELF-TAPPING 2 REQ’D CROSS PIN BOLT ASS’Y 13 P/N 29-0206 2 REQ’D FIRE BOLT PLATE 12 P/N 22-0814-119 METAL END CAP ASS’Y 11 P/N 41-0902-05-IP #10-32 X 1/2" * PAN HEAD SCREW 2 REQ’D 7 DRIVE SHAFT P/N 26-0355 (NO TRIM) OR 26-0359 (TRIM) COVER PLATE 10 P/N 22-0847 * #3-48 X 1/4" * INCLUDED IN HARDWARE PACK P/N 91-0839-01-630 30 EXIT DEVICES CENTER BLOCK 9 P/N 23-0571 FLAT HEAD SCREW 8 TAILPIECE ADAPTOR P/N 23-0335 3900/8900 Series SURFACE CONCEALED VERTICAL ROD 3900/8900 Series Wood Door Surface Concealed Vertical Rod ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 PART NUMBER DESCRIPTION UNITS PKGD 2019 PRICE 81.00 29-0630-121 Support plate, 121 finish Each $ 29-0630-626 Support plate, US26D (626) finish Each $ 92.00 33.00 31-0202 Strike plate assembly Each $ 31-0579-06 Top actuator assembly, 3900 Each $ 31-0579-05 Top actuator assembly, 8900 Each $ 22-0585 Mounting cap spacer Each 143.00 130.00 $ 6.00 23.00 41-0903 End cap assembly, hinge end — metal Each $ 3900 Push Bar — 313, 335, 628 finish Push bar assembly: order by exit device Series (3900/8900), door opening width and 313, 335, or 628 finish Each $ 3900 Push Bar — 630 finish Push bar assembly: order by exit device Series (3900/8900), door opening width and US32D (630) finish Each $ 382.00 3900 Push Bar — 605, 606, 629 finish Push bar assembly: order by exit device Series (3900/8900), door opening width and and US3 (605), US4 (606), US32 (629) finishes Each $ 432.00 143.00 26-0355 Drive shaft (no trim) Each $ 45.00 26-0359 Drive shaft (trim) Each $ 45.00 23-0335 Tailpiece adapter Each 23-0571 22-0847 41-0902-05 22-0814-119 29-0206 22-0332-11-313 Center block Cover plate Each Each End cap assembly, nose end — metal Fire bolt plate Cross pin bolt assembly Upper cover, 313 finish $ $ 7.00 26.00 $ 6.00 Each $ 28.00 Each $ 50.00 Each $ Each $ 52.00 52.00 52.00 76.00 22-0332-11-335 Upper cover, 335 finish Each $ 22-0332-11-628 Upper cover, 628 finish Each $ 22-0332-14-629 Upper cover, US32 (629) finish Each $ 81.00 22-0332-14-630 Upper cover, US32D (630) finish Each $ 81.00 15 41-0337-IP Rod assembly Each $ * 14 96.00 $ 19.00 91-0839-01-630 Hardware pack Each NS 80-0180-392 Door template, 3900/8900 Each Email Only NS 80-0180-390 Installation sheet, 3900/8900 Each Email Only NS 80-0180-86-02 Frame template, 3900/8900 Each Email Only NS = Not shown Note: Consult factory for doors over 54" above push bar centerline. US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. 3889 MULLION 1 TOP FITTING 23-0511 * 1/4-20 X 3/4" PAN HEAD SCREW 4 REQ’D MULLION SPACER (ONLY IF NEEDED) STRIKE ASS’Y SUPPLIED WITH EXIT DEVICE (SEE 8700 OR 3700 RIM DEVICE) 10-32 X 3/16" * PAN HD. SCREW * 1/4"-20 X 2-1/4" PAN HD SCREW WASHER 1/4" * 2 BOTTOM FITTING P/N 23-0512 1/4"-20 X 3/8"* ACORN NUT 1/4"-20 ANCHOR* 2 REQ’D 32 EXIT DEVICES * INCLUDED IN HARDWARE PACK P/N 91-0961 3889 MULLION 3889 Removable Mullion for Hollow Metal or Wood Doors ITEM PART NUMBER DESCRIPTION UNITS PKGD 2019 PRICE 1 23-0511 Top fitting Each $ 92.00 2 23-0512 Bottom fitting Each $ 96.00 NS 91-0961 Hardware pack Each $ US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. 14.00 3890 MULLION 1 MOUNTING PLATE P/N 22-0690 * 1/4-20 X 2-1/4" PAN HEAD SCREW 2 PLCS 10-32 X 3/16" * PAN HEAD SCREW 2 REQ’D WASHER 1/4" * 2 REQ’D 1/4-20 X 3/8" * ACORN NUT 2 REQ’D 1/4-20 X 3/4" * PAN HEAD SCREW 4 REQ’D 2 10-32 RIVNUT (SUPPLIED W/ RIVNUT INSTALLATION KIT) P/N 41-0975-04 3 REQ’D 3 10-32 X 3/4" FLAT HEAD SCREWS P/N 272-10-12-119-MP 3 REQ’D 4 TOP/BOTTOM FITTING P/N 23-0512 MULLION KNURLED SPACER 6 P/N 29-0063 2 REQ’D STRIKE 5 P/N 22-0329 2 REQ’D 10-32 X 1/2" * FLAT HEAD SCREW 4 REQ’D * INCLUDED IN HARDWARE PACK P/N 91-0961 4 TOP/BOTTOM FITTING P/N 23-0512 1/4"-20 ANCHOR * 2 REQ’D 34 EXIT DEVICES 3890 MULLION 3890 Removable Mullion for Aluminum Doors ITEM PART NUMBER DESCRIPTION UNITS PKGD 2019 PRICE 68.00 1 22-0690 Mounting plate Each $ 2 41-0975-04 Rivnut tool kit assembly Each $ 3 S272-10-12-119-MP #10-32 × 3/4" flat head screw Pkg. of 10 $ 4 23-0512 Bottom fitting Each 5 22-0329 Strike Each $ Each $ Each $ 6 NS 29-0063 91-0961 Knurled spacer Hardware pack US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. $ 14.00 9.00 96.00 17.00 26.00 14.00 8099/8099M DUMMY PUSHBAR 1 METAL END CAP P/N 41-0903-IP 2 PUSH BAR ASS’Y 3 #10 X 1-1/4" PAN HEAD SELF-TAPPING SCREW P/N S253-10R20-603-MP 4 REQ'D METAL END CAP ASS’Y 6 P/N 41-0902-05-IP #10-32 X 5/8" 5 SELF-TAPPING SCREW P/N S292-10R10-603-MP 4 REQ'D 4 METAL END CAP ASS’Y P/N 41-0912-IP (8099, WITHOUT SWITCH) MONITORING OPTION 7 MICRO SWITCH ASS’Y P/N 31-0186-01 9 MONITOR SWITCH KIT P/N 91-0897-01 (SINGLE SWITCH) OR P/N 91-0897-02 (DUAL SWITCH) 36 EXIT DEVICES 8 #6-32 X 3/8" ROUND HEAD SCREW SELF-TAPPING P/N S282-06R06-603-MP 8099/8099M DUMMY PUSHBAR 8099/8099M Dummy Pushbar ITEM 1 2 3 4 5 PART NUMBER DESCRIPTION UNITS PKGD 41-0903 End cap assembly, hinge end — metal Each $ 8099 Push Bar — 313, 335, 628 finish Push bar assembly: order by exit device Series (8099M only), door opening width and 313, 335, or 628 finish Each $ 8099 Push Bar — 630 finish Push bar assembly: order by exit device Series (8099M only), door opening width and US32D (630) finish Each $ 382.00 8099 Push Bar — 605, 606, 629 finish Push bar assembly: order by exit device Series (8099M only), door opening widthand US3 (605), US4 (606), US32 (629) finishes Each $ 432.00 S253-10R20-603-MP #10 × 1-1/4" pan head self-tapping screw Pkg. of 10 41-0912 S292-10R10-603-MP End cap assembly, nose end, for 8099 Dummy Pushbar without switch #10-32 × 5/8" self-tapping screw 2019 PRICE 23.00 143.00 $ 9.00 23.00 Each $ Pkg. of 10 $ 10.00 28.00 6 41-0902-05 End cap assembly, nose end — metal Each $ 7 31-0186-01 Microswitch assembly with wires Each $ 8 S282-06R06-603-MP #6-32 × 3/8" round head self-tapping screw Pkg. of 10 $ 91-0897-01 Single switch monitor kit (includes: monitor switch assembly, screws, wire nuts and installation instructions) Each List 91-0897-02 Dual switches monitor kit (includes: monitor switch assembly, screws, wire nuts and installation instructions) Each List 9 73.00 9.00 NS 80-0180-050 Installation sheet 8099 Each Email Only NS 80-0180-250 Installation sheet 8099M Each Email Only NS 80-0180-148 Wiring instruction sheet, 8099M Each Email Only List = Refer to current pricelist NS = Not shown US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. 8100 Series SURFACE VERTICAL ROD HEADER STRIKE 21 P/N 22-0214 #8 X 3/4" WOOD SCREW 20 P/N 91-0831-02-630 6 REQ'D STRIKE ASS’Y 19 P/N 31-0202 1 ACTUATOR ASS’Y P/N 31-0201 BINDER POST 18 P/N 26-0584-652-MP 4 REQ’D * #10-24 X 1" PAN HEAD MACHINE SCREW 4 REQ'D UPPER ROD ASS’Y 17 P/N 31-0235-01-IP 2 UPPER COVER P/N 22-0332-0X-XXX 3 GUIDE ROD COVER P/N 24-0003-01-XXX-IP OR 24-0031-XXX OR 24-0033-XXX 2 REQ'D SVR FINAL ASS’Y 16 P/N 41-0282-01-P OR 41-0333-11-P (8100T) 4 METAL END CAP P/N 41-0903-IP * #10-32 X 5/8" SCREW SELF-TAPPING 4 REQ'D 5 DOGGING ASS’Y 14 P/N 31-0265-IP MOLDING CLIP 15 P/N 25-0008 2 REQ’D 6 DOGGING KEY P/N 29-0481-MP 7 PUSH BAR ASS’Y * #10 X 1-1/4" PAN HEAD * #6-32 X 1/4" METAL END CAP ASS’Y 14 P/N 41-0902-04-IP PAN HEAD SCREW * LOCK WASHER SPRING LOWER ROD ASS’Y 13 P/N 31-0192-02-P LOWER BOLT GUIDE 12 P/N 31-0175-P BOLT GUIDE BUSHING 11 P/N 25-0284-MP STRIKE 10 THRESHOLD P/N 4005 38 SELF-TAPPING SCREW 13 REQ'D 8 LOWER COVER P/N 22-0275-0X-XXX * #6-32 X 1/4" LOWER 9 HOUSING P/N 23-0024 EXIT DEVICES PAN HEAD SCREW 2 REQ'D * INCLUDED IN HARDWARE PACK P/N 91-0831-01-XXX 8100 Series SURFACE VERTICAL ROD 8100 Series Surface Vertical Rod Exit Device ITEM 1 2 PART NUMBER DESCRIPTION UNITS PKGD 31-0201 Actuator assembly Each $ 42.00 22-0332-01-313 Upper cover, 313 finish Each $ 32.00 22-0332-01-335 Upper cover, 335 finish Each $ 32.00 22-0332-01-628 Upper cover, 628 finish Each $ 32.00 22-0332-02-605 Upper cover, US3 (605) finish Each $ 68.00 22-0332-02-606 Upper cover, US4 (606) finish Each $ Each $ Each $ Each $ 68.00 Each $ 68.00 Each $ 68.00 22-0332-04-629 Upper cover, US32 (629) finish 22-0332-04-630 Upper cover, US32D (630) finish 24-0003-01-313 Rod guide cover, 313 finish 24-0003-01-335 Rod guide cover, 335 finish 24-0003-01-628 3 Rod guide cover, 628 finish 2019 PRICE 76.00 63.00 57.00 207.00 207.00 24-0031-605 Rod guide cover, US3 (605) finish Each $ 24-0031-606 Rod guide cover, US4 (606) finish Each $ 24-0033-629 Rod guide cover, US32 (629) finish Each $ 112.00 24-0033-630 Rod guide cover, US32D (630) finish Each $ 112.00 4 41-0903 End cap assembly, hinge end — metal Each $ 5 31-0265 Dogging assembly, complete Each $ 6 29-0481-MP Dogging key Pkg. of 10 $ 8100 Push Bar — 313, 335, 628 finish Push bar assembly: order by exit device Series (8100), door opening width and 313, 335, or 628 finish Each $ 8100 Push Bar — 630 finish Push bar assembly: order by exit device Series (8100), door opening width and US32D (630) finish Each $ 382.00 8100 Push Bar — 605, 606, 629 finish Push bar assembly: order by exit device Series (8100), door opening width and US3 (605), US4 (606), US32 (629) finishes Each $ 432.00 7 8 23.00 21.00 33.00 143.00 22-0275-01-313 Lower cover, 313 finish Each $ 32.00 22-0275-01-335 Lower cover, 335 finish Each $ 32.00 22-0275-01-628 Lower cover, 628 finish Each $ 32.00 22-0275-02-605 Lower cover, US3 (605) finish Each $ 68.00 22-0275-02-606 Lower cover, US4 (606) finish Each $ 68.00 22-0275-04-629 Lower cover, US32 (629) finish Each $ 58.00 22-0275-04-630 Lower cover, US32D (630) finish Each $ $ 57.00 9 23-0024 Lower housing Each 10 4005 Strike for 4015 Threshold Bolt Each List 11 25-0284-MP Bolt guide bushing Pkg. of 10 $ 12 13 31-0175-P 31-0192-02-P Lower bolt guide assembly Lower rod assembly 32.00 9.00 18.00 Each $ Each $ 38.00 $ 28.00 14 41-0902-04 End cap assembly, nose end — metal Each 15 25-0008 Molding clip Each 16 41-0282-01-P SVR final assembly, complete with rods Each $ 41-0333-11-P SVR final assembly, top rod Each $ 17 31-0235-01 Upper rod assembly Each $ 46.00 18 26-0584-652-MP Binder post with screws 2-Pack $ 26.00 19 31-0202 Strike plate assembly Each $ 33.00 20 21 91-0831-02-630 22-0214 91-0831-01-335 * 91-0831-01-605 Strike screw pack for wood frame Header strike for wood frame Hardware pack for 313, 335 finishes Hardware pack for US3 (605), US4 (606) finishes Pkg. of 6 $ 9.00 228.00 156.00 $ 9.00 26.00 Each $ Each $ 12.00 Each $ 19.00 $ 10.00 91-0831-01-630 Hardware pack for 628, US32 (629), US32D (630) finishes Each NS 80-0180-198-01 Exit device template, 8100 Each NS 80-0180-198-02 Strike template, 8100 Each Email Only NS 80-0180-194 Metal frame installation sheet, 8100 Each Email Only NS 80-0180-195 Wood frame installation sheet, 8100 Each Email Only List = Refer to current pricelist NS = Not shown US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. Email Only 8200 Series SURFACE VERTICAL ROD * #10 X 1-1/4" PAN HEAD SELF-TAPPING SCREW 13 REQ'D 1 ACTUATOR ASS'Y P/N 31-0201 STRIKE ASS'Y 17 P/N 31-0202 2 UPPER COVER P/N 22-0332-0X-XXX UPPER ROD ASS’Y 16 P/N 31-0235-01-IP 3 METAL END CAP #10-32 X 5/8" SCREW * SELF-TAPPING 4 REQ'D P/N 41-0903-IP 4 DOGGING ASS’Y P/N 31-0265-IP SVR FINAL ASS’Y 15 P/N 41-0282-01-P OR (8100T) 41-0333-11-P 5 PUSH BAR ASS'Y 6 DOGGING KEY P/N 29-0481-MP * #10 X 1/2" ROUND HEAD SELF-TAPPING SCREW MOLDING CLIP 14 P/N 25-0008 2 REQ'D * #10 X 1-1/4" PAN HEAD SELF-TAPPING SCREW * LOCK * #6-32 X 1/4" WASHER SPRING PAN HEAD SCREW METAL END CAP ASS’Y 13 P/N41-0902-04-IP 7 GUIDE ROD COVER 8 LOWER COVER LOWER ROD ASS’Y 12 P/N 31-0192-02-P BOLT GUIDE BUSHING 11 P/N 25-0284-MP LOWER BOLT 10 GUIDE ASS’Y P/N 31-0175-P P/N 22-0275-0X-XXX 9 LOWER HOUSING P/N 23-0024 * #6-32 X 1/4" PAN HEAD SCREW 2 REQ'D * INCLUDED IN HARDWARE PACK P/N 91-0831-01-XXX 40 EXIT DEVICES P/N 24-0003-01-XXX OR P/N 24-0031-XXX OR P/N 24-0033-XXX 2 REQ'D 8200 Series SURFACE VERTICAL ROD 8200 Series Narrow Stile Surface Vertical Rod ITEM 1 2 PART NUMBER DESCRIPTION UNITS PKGD 31-0201 Actuator assembly Each $ 42.00 22-0332-01-313 Upper cover, 313 finish Each $ 32.00 22-0332-01-335 Upper cover, 335 finish Each $ 32.00 22-0332-01-628 Upper cover, 628 finish Each $ 32.00 Each $ 68.00 Each $ Each $ Each $ Each $ $ 22-0332-02-605 22-0332-02-606 22-0332-04-629 22-0332-04-630 3 4 5 6 41-0903 21.00 Each $ 8200 Push Bar — 630 finish Push bar assembly: order by exit device Series (8200), door opening width and US32D (630) finish Each $ 382.00 8200 Push Bar — 605, 606, 629 finish Push bar assembly: order by exit device Series (8200), door opening width and US3 (605), US4 (606), US32 (629) finishes Each $ 432.00 29-0481-MP Dogging key Pkg. of 10 $ 33.00 Each $ 68.00 Each $ 68.00 Each $ 68.00 24-0031-605 Rod guide cover, 313 finish Rod guide cover, 335 finish Rod guide cover, 628 finish Rod guide cover, US3 (605) finish Rod guide cover, US4 (606) finish 143.00 Each $ 207.00 Each $ 207.00 112.00 112.00 24-0033-629 Rod guide cover, US32 (629) finish Each $ 24-0033-630 Rod guide cover, US32D (630) finish Each $ 22-0275-01-313 Lower cover, 313 finish Each $ 32.00 22-0275-01-335 Lower cover, 335 finish Each $ 32.00 22-0275-01-628 Lower cover, 628 finish Each $ 32.00 22-0275-02-605 Lower cover, US3 (605) finish Each $ 68.00 22-0275-02-606 Lower cover, US4 (606) finish Each $ 68.00 Each $ 58.00 Each $ Each $ Each $ 22-0275-04-630 12 23.00 Push bar assembly: order by exit device Series (8200), door opening width and 313, 335, or 628 finish 22-0275-04-629 11 End cap assembly, hinge end — metal 57.00 8200 Push Bar — 313, 335, 628 finish 24-0031-606 10 Upper cover, US32D (630) finish 63.00 Each 24-0003-01-628 9 Upper cover, US32 (629) finish 76.00 Dogging assembly, complete 24-0003-01-335 8 Upper cover, US4 (606) finish 31-0265 24-0003-01-313 7 Upper cover, US3 (605) finish 2019 PRICE 23-0024 31-0175-P 25-0284-MP 31-0192-02-P Lower cover, US32 (629) finish Lower cover, US32D (630) finish Lower housing Lower bolt guide assembly Bolt guide bushing Lower rod assembly 57.00 32.00 18.00 $ Pkg. of 10 9.00 Each $ 38.00 $ 28.00 13 41-0902-04 End cap assembly, nose end — metal Each 14 25-0008 Molding clip Each 15 41-0282-01-P SVR final assembly, complete with rods Each $ 41-0333-11-P SVR final assembly, top rod Each $ 16 31-0235-01 Upper rod assembly Each $ 46.00 17 31-0202 Strike plate assembly Each $ 33.00 91-0831-01-335 Hardware pack for 313, 335 finishes Each $ 12.00 Each $ 19.00 Each $ NS 91-0831-01-605 91-0831-01-630 Hardware pack for US3 (605), US4 (606) finishes Hardware pack for 628, US32 (629), US32D (630) finishes $ 9.00 228.00 156.00 10.00 NS 80-0180-199-01 Exit device template, 8200 Each Email Only NS 80-0180-199-02 Strike template, 8200 Each Email Only NS 80-0180-196 Installation sheet, 8200 Each Email Only NS = Not shown Note: Consult factory for doors over 54" above push bar. US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. 8300 Series MORTISE EXIT DEVICE 1 #12 X 24 3/4" FLAT HEAD COMBO SCREW P/N 91-0833-02 FRAME KIT 2 STRIKE P/N 22-0398-01-630 3 METAL END CAP #10-32 X 5/8" * SELF-TAPPING SCREW 4 REQ'D CAM 11 P/N 22-0066 OR P/N 22-0662 P/N 41-0903-IP 4 DOGGING ASS’Y P/N 31-0265-IP 5 PUSH BAR ASS’Y FACEPLATE 10 P/N 24-0138-01-XXX 6 DOGGING KEY P/N 29-0481-MP * #10 X 1-1/4" PAN HEAD SELF-TAPPING SCREW * #10 X 1/2" FLAT HEAD SELF-TAPPING 2 REQ'D #8-32 X 1/4" 9 FLAT HEAD SCREW P/N 91-0244-XXX 1 7 METAL END CAP ASS’Y P/N 41-0902-05-IP 8 #6 HEX HEAD CAM SCREW * INCLUDED IN HARDWARE PACK P/N 91-0833-01 42 EXIT DEVICES P/N 26-0217N-MP OR CAM RETAINER RING P/N R603-31-MP 8300 Series MORTISE EXIT DEVICE 8300 Series Mortise Exit Device ITEM PART NUMBER DESCRIPTION UNITS PKGD 2019 PRICE 6.00 1 91-0833-02 #12-24 × 3/4" flat head combo screw Each 2 22-0398-01-630 Strike plate Each $ 28.00 3 41-0903-IP End cap assembly, hinge end — metal Each $ 23.00 4 31-0265-IP Dogging assembly, complete Each $ 8300 Push Bar — 313, 335, 628 finish Push bar assembly: order by exit device Series (8300), door opening width and 313, 335, or 628 finish Each $ 8300 Push Bar — 630 finish Push bar assembly: order by exit device Series (8300), door opening width and US32D (630) finish Each $ 382.00 8300 Push Bar — 605, 606, 629 finish Push bar assembly: order by exit device Series (8300), door opening widthand US3 (605), US4 (606), US32 (629) finishes Each $ 432.00 6 29-0481-MP Dogging key Pkg. of 10 $ 33.00 7 41-0902-05 End cap assembly, nose end — metal Each $ 28.00 5 8 9 10 11 * $ 21.00 143.00 26-0217N-MP #6 hex head cam screw Pkg. of 10 $ 15.00 R603-31-MP Cam retainer ring (past production) Pkg. of 10 $ 15.00 91-0244-335-P #8-32 × 1/4" flat head screws, 335 finish Pkg. of 2 $ 5.00 91-0244-628 #8-32 × 1/4" flat head screws, 628 finish Pkg. of 2 $ 5.00 24-0138-01-313 Faceplate kit with screws, 313 finish Each List 24-0138-01-335 Faceplate kit with screws, 335 finish Each List 24-0138-01-628 Faceplate kit with screws, 628 finish Each 22-0066 Latchbolt retraction cam with screw attachment Each $ Each $ 10.00 $ 10.00 22-0662 Latchbolt retraction cam with retainer clip attachment List 11.00 91-0833-01 Hardware pack Each NS 80-0180-122-01 Device template, 3300 Each Email Only NS 80-0180-122-02 Strike template, 3300 Each Email Only NS 80-0180-36 Installation sheet, 8300 Each Email Only List = Refer to current pricelist NS = Not shown US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. 8400 Series MORTISE EXIT DEVICE 1 BACK-UP PLATE P/N 23-0110 2 #10-32 X 5/8" FLAT HEAD SCREW PACK P/N 91-0833-04 4 REQ'D 3 STRIKE P/N 31-0561-01-IP THERMAL CLAD KIT 14 P/N 91-0325-XX THICK DOOR KIT 13 P/N 91-0995-XX-IP #10-32 X 5/8" * SCREW SELF-TAPPING 4 REQ'D CAM 12 P/N 22-0066 OR P/N 22-0662 4 METAL END CAP P/N 41-0903-IP 5 DOGGING ASS’Y P/N 31-0265-IP * #10 X 1-1/4" PAN HEAD 6 PUSH BAR ASS'Y FACEPLATE 11 P/N 24-0137-XX-XXX SELF-TAPPING SCREW 2 REQ'D 7 DOGGING KEY P/N 29-0481-MP * #10 X 5/8" FLAT HEAD SCREW SELF-TAPPING 2 REQ'D #8-32 X 1/4" FLAT HEAD 10 SCREW-2 PACK P/N 91-0244-XXX #10-32 X 1-3/4" FLAT HEAD SCREW * FOR 31/32" BACKSETS OR #10-32 X 1-7/8" FLAT HEAD SCREW * FOR 1-1/8", 1-1/2" BACKSETS 2 REQ'D 44 EXIT DEVICES 8 METAL END CAP ASS’Y P/N 41-0902-05-IP 9 #6 HEX HEAD CAM SCREW P/N 26-0217N-MP OR CAM RETAINER RING P/N R603-31-MP * INCLUDED IN HARDWARE PACK P/N 91-0833-03 8400 Series MORTISE EXIT DEVICE 8400 Series Narrow Stile Mortise Exit Device ITEM 1 2 3 4 5 6 7 8 9 10 PART NUMBER DESCRIPTION UNITS PKGD 23-0110 Back-up plate Each 91-0833-04 #10-32 × 5/8" flat head screw 31-0561-01-IP Strike assembly 41-0903 End cap assembly, hinge end — metal 2019 PRICE $ 13.00 Pkg. of 10 $ Each $ Each $ $ 7.00 17.00 23.00 21.00 31-0265 Dogging assembly, complete Each 8400 Push Bar — 313, 335, 628 finish Push bar assembly: order by exit device Series (8400), door opening width and 313, 335, or 628 finish Each $ 8400 Push Bar — 630 finish Push bar assembly: order by exit device Series (8400), door opening width and US32D (630) finish Each $ 382.00 8400 Push Bar — 605, 606, 629 finish Push bar assembly: order by exit device Series (8400), door opening width and US3 (605), US4 (606), US32 (629) finishes Each $ 432.00 29-0481-MP Dogging key Pkg. of 10 $ 33.00 Each $ 28.00 Pkg. of 10 $ 15.00 Pkg. of 10 $ 15.00 41-0902-05-IP End cap assembly, nose end — metal 26-0217N-MP #6 hex head cam screw R603-31-MP Cam retainer ring (past production) 91-0244-335 #8-32 × 1/4" flat head screws, 335 finish 143.00 Pkg. of 2 $ 5.00 5.00 91-0244-628 #8-32 × 1/4" flat head screws, 628 finish Pkg. of 2 $ 24-0137-01-313 Faceplate kit with screws, flat or bevel, 313 finish Each List 24-0137-01-335 Faceplate kit with screws, flat or bevel, 335 finish Each List 24-0137-01-628 Faceplate kit with screws, flat or bevel, 628 finish Each List 24-0137-01-672 Faceplate kit with screws, flat or bevel, US26 (672) finish Each List 24-0137-01-702 Faceplate kit with screws, flat or bevel, US26D (702) finish Each List 24-0137-02-313 Faceplate kit with screws, radius, 313 finish Each List 24-0137-02-335 Faceplate kit with screws, radius, 335 finish Each List 24-0137-02-628 Faceplate kit with screws, radius, 628 finish Each List 24-0137-02-672 Faceplate kit with screws, radius, US26 (672) finish Each List 24-0137-02-702 Faceplate kit with screws, radius, US26D (702) finish Each List 24-0137-03-313 Faceplate kit with screws, radius with weatherstrip, 313 finish Each List 24-0137-03-335 Faceplate kit with screws, radius with weatherstrip, 335 finish Each List 24-0137-03-628 Faceplate kit with screws, radius with weatherstrip, 628 finish Each 22-0066 Latchbolt retraction cam with screw attachment Each $ 22-0662 Latchbolt retraction cam with retainer clip attachment Each $ 91-0995-02-IP Thick door kit for 2" door Each List 91-0995-03-IP Thick door kit for 2-1/4" door Each List 91-0995-04-IP Thick door kit for 2-1/2" door Each List 91-0995-05-IP Thick door kit for 2-3/4" door Each List 14 91-0325-01 Thermal clad kit for 1-3/4" door with 1/4" cladding Each List 91-0325-02 Thermal clad kit for 1-3/4" door with 1/2" cladding Each List * 91-0833-03 Hareware pack Each $ NS 80-0180-123-01 Device template, 8400 Each Email Only NS 80-0180-123-02 Strike template, 8400 Each Email Only NS 80-0180-38 Installation sheet, 8400 Each Email Only 11 12 13** List = Refer to current pricelist NS = Not shown Note: **Item #13 (above) Thick Door Kit for mortise exit devices available separately. US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. List 11.00 10.00 7.00 8475 MORTISE MID-PANEL EXIT DEVICE 1 BACK-UP PLATE P/N 23-0110 2 #10-32 X 5/8" FLAT HEAD SCREW P/N S262-10R10N-603-MP 4 REQ'D 3 STRIKE ASS’Y HINGE STILE P/N 31-0561-01-IP 4 #8-32 X 1/8" CUP POINT SET SCREW P/N S232C08H02N-MP 4 REQ'D MOUNTING PLATES 18 P/N 22-0552 2 REQ'D 5 DOGGING ASS’Y P/N 31-0265-IP LEAD STILE 6 END CAP P/N 25-0471-IP 7 #10-32 X 5/8" SELF-TAPPING SCREW P/N S292-10R10-603-MP 4 REQ'D FACEPLATE KIT 17 P/N 24-0137-XX-XXX 8 #10-32 X 1/2" PAN HEAD 10 PUSH BAR 9 DOGGING ASS’Y 11 #10-32 X 1/4" 13 UPPER LINK #8-32 X 1/4" 16 FLAT HEAD 2-PACK P/N 91-0244-XXX 46 END CAP ASS’Y 15 P/N 31-0572-IP EXIT DEVICES P/N 22-0551 OR P/N 22-0551-01 14 DOOR COVER P/N 25-0473 PAN HEAD SCREW P/N S261-10R04N603-MP 2 REQ'D 12 #10-32 X 1/4" PAN HEAD SEMS SCREW P/N S277-10R04-603-MP 2 REQ'D KEY P/N 29-0481-MP SEMS SCREW P/N S277-10R08-603-MP 2 REQ'D 8475 MORTISE MID-PANEL EXIT DEVICE 8475 Mortise Mid-Panel Exit Device ITEM PART NUMBER DESCRIPTION UNITS PKGD 2019 PRICE 13.00 1 23-0110 Back-up plate Each 2 S262-10R10N-603-MP #10-32 × 5/8" flat head screw Pkg. of 10 $ 3 31-0561-01-IP Strike assembly Each $ 4 S232C08H02N-MP #8-32 × 1/8" cup point set screw Pkg. of 10 $ Each $ Each $ Pkg. of 10 $ 5 6 7 8 9 10* 11 12 13 14 15 16 17 18 31-0265 Dogging assembly, complete 25-0471 End cap (hinge end) S292-10R10-603-MP S277-10R08-603-MP #10-32 × 5/8" self-tapping screw #10-32 × 1/2" pan head SEMS screw $ 20.00 21.00 11.00 10.00 $ Pkg. of 10 7.00 17.00 9.00 33.00 29-0481-MP Dogging key Pkg. of 10 $ 8475 Push Bar — 313, 335, 628 finish Push bar assembly: order by exit device series (8475), door opening width and 313, 335, or 628 finish Each $ 8475 Push Bar — 630 finish Push bar assembly: order by exit device series (8475), door opening width and US32D (630) finish Each $ 382.00 8475 Push Bar — 605, 606, 629 finish Push bar assembly: order by exit device series (8475), door opening width and US3 (605), US4 (606), US32 (629) finishes Each $ 432.00 S261-10R04N603-MP #10-32 × 1/4" pan head screw Pkg. of 10 $ Pkg. of 10 $ Each $ Each $ Each $ S277-10R04-603-MP 22-0551 #10-32 × 1/4" pan head SEMS screw (link) Upper link for narrow stile 22-0551-01 25-0473 31-0572-IP 91-0244-335 Upper link for medium/wide stile Door cover End cap assembly, nose end — complete #8-32 × 1/4" flat head screws, 335 finish Each 143.00 $ 9.00 11.00 17.00 14.00 9.00 20.00 Pkg. of 2 $ 5.00 5.00 91-0244-628 #8-32 × 1/4" flat head screws, 628 finish Pkg. of 2 $ 24-0137-01-313 Faceplate kit with screws, flat or bevel, 313 finish Each List 24-0137-01-335 Faceplate kit with screws, flat or bevel, 335 finish Each List 24-0137-01-628 Faceplate kit with screws, flat or bevel, 628 finish Each List 24-0137-01-672 Faceplate kit with screws, flat or bevel, US26 (672) finish Each List 24-0137-01-702 Faceplate kit with screws, flat or bevel, US26D (702) finish Each List 24-0137-02-313 Faceplate kit with screws, radius, 313 finish Each List 24-0137-02-335 Faceplate kit with screws, radius, 335 finish Each List 24-0137-02-628 Faceplate kit with screws, radius, 628 finish Each List 24-0137-02-672 Faceplate kit with screws, radius, US26 (672) finish Each List 24-0137-02-702 Faceplate kit with screws, radius, US26D (702) finish Each List 24-0137-03-313 Faceplate kit with screws, radius with weatherstrip, 313 finish Each List 24-0137-03-335 Faceplate kit with screws, radius with weatherstrip, 335 finish Each List 24-0137-03-628 Faceplate kit with screws, radius with weatherstrip, 628 finish Each List 22-0552 Mounting plate Each $ List = Refer to current pricelist Note: Please contact factory for information on the 8475 Midpoint Mortise Exit Device. Note: *Item No. 10 (above) requires dimensions between two facing stile sections (Dimension "A"). Please contact factory for more information. US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. 7.00 8500 Series CONCEALED VERTICAL ROD STRIKE PLATE ASS’Y 14 P/N 31-0202 ACTUATOR ASS’Y 13 P/N 31-0579-01-IP 1 UPPER BOLT P/N 26-0094 #6-32 X 1/2" 12 CAP SCREW 2 REQ'D P/N S242A06-08-MP 2 SPIDER 4 METAL END CAP #10-32 X 5/8" SCREW * SELF-TAPPING 4 REQ'D P/N 25-0062-01-MP P/N 41-0903-IP 3 CVR FINAL ASS’Y P/N 41-0935 5 DOGGING ASS’Y P/N 31-0265-IP * #10 X 1 1/4" PAN HEAD 6 PUSH BAR ASS’Y SELF-TAPPING SCREW 2 REQ'D 7 DOGGING KEY P/N 29-0481-MP * #10-32 X 1/2" PAN HEAD SCREW 2 REQ'D 8 METAL END CAP ASS’Y P/N 41-0902-05-IP 9 LOWER BOLT GUIDE ASS’Y P/N 31-0034 10 BOLT GUIDE BUSHING P/N 25-0506-MP 11 STRIKE P/N 22-0125-IP 48 EXIT DEVICES * INCLUDED IN HARDWARE PACK P/N 91-0833-03 8500 Series CONCEALED VERTICAL ROD 8500 Series Metal Door Concealed Vertical Rod ITEM PART NUMBER DESCRIPTION UNITS PKGD 2019 PRICE 1 26-0094 Upper bolt Each $ 2 25-0062-01-MP Spider Pkg. of 10 $ 173.00 3 41-0935 CVR final assembly, complete with bolts Each $ 4 41-0903-IP Metal end cap assembly, hinge end Each $ $ 5 6 10.00 22.00 23.00 21.00 31-0265-IP Dogging assembly, complete Each 8500 Push Bar (-PB) — 313, 335, 628 finish Push bar assembly: order by exit device series (8500), door opening width and 313, 335, or 628 finish Each $ 8500 Push Bar (-PB) — 630 finish Push bar assembly: order by exit device series (8500), door opening width and US32D (630) finish Each $ 382.00 8500 Push Bar (-PB) — 605, 606, 629 finish Push bar assembly: order by exit device series (8500), door opening width and US3 (605), US4 (606), US32 (629) finishes Each $ 432.00 143.00 7 29-0481-MP Dogging key Pkg. of 10 $ 33.00 8 41-0902-05-IP Metal end cap assembly, nose end Each $ 28.00 9 31-0034 Lower bolt guide assembly Each $ 10 25-0506-MP Bolt guide bushing Pkg. of 10 $ 11 22-0125-ip Strike (ANSI) Each 12 S242A06-08-MP #6-32 × 1/2" cap screw, rod piercing Pkg. of 10 $ Each $ 13 31-0579-01-IP Top actuator assembly $ 11.00 9.00 22.00 12.00 98.00 14 31-0202 Strike plate assembly Each Email Only * 91-0836-01-603 Hardware pack Each Email Only NS 80-0180-39-01 Device template, 8500 Each Email Only NS 80-0180-39-02 Strike template, 8500 Each Email Only NS 80-0180-51 Installation sheet, 8600 Each Email only NS = Not shown Note: Consult factory for doors over 66" above pushbar. US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. 8600 Series CONCEALED VERTICAL ROD STRIKE PLATE ASS’Y 13 P/N 31-0945-MP ACTUATOR ASS’Y 12 P/N 31-0944-IP #6-32 X 1/2" 11 CAP SCREW P/N S242A06-08-MP 2 REQ’D 1 UPPER BOLT P/N 26-0094 4 METAL END CAP P/N 41-0903-IP #10-32 X 5/8" SCREW * SELF-TAPPING 4 REQ’D 2 SPIDER P/N 25-0062-01-MP 3 CVR FINAL ASS’Y P/N 41-0935 5 DOGGING ASS’Y P/N 31-0265-IP * #10-32 X 5/16" * #10 X 1-1/4" PAN HEAD FLAT HEAD SCREW 5 REQ’D SELF-TAPPING SCREW 2 REQD 6 PUSH BAR ASS’Y 7 DOGGING KEY P/N 29-0481-MP * #10-32 X 1/2" PAN HEAD SCREW 2 REQ’D 8 METAL END CAP ASS'Y P/N 41-0902-05-IP 9 LOWER BOLT GUIDE ASS’Y P/N 31-0964-IP 10 BOLT GUIDE BUSHING P/N 25-0506-MP 50 EXIT DEVICES * INCLUDED IN HARDWARE PACK P/N 91-0835-01-630 8600 Series CONCEALED VERTICAL ROD 8600 Series Narrow Stile Concealed Vertical Rod ITEM PART NUMBER DESCRIPTION UNITS PKGD 2019 PRICE 1 26-0094 Upper bolt Each $ 2 25-0062-01-MP Spider Pkg. of 10 $ 173.00 3 41-0935 CVR final assembly, complete with bolts Each $ 4 41-0903-IP Metal end cap assembly, hinge end Each $ $ 5 10.00 22.00 23.00 21.00 31-0265-IP Dogging assembly, complete Each 8600 Push Bar (-PB) — 313, 335, 628 finish Push bar assembly: order by exit device series (8600), door opening width and 313, 335, or 628 finish Each $ 8600 Push Bar (-PB) — 630 finish Push bar assembly: order by exit device series (8600), door opening width and US32D (630) finish Each $ 382.00 8600 Push Bar (-PB) — 605, 606, 629 finish Push bar assembly: order by exit device series (8600), door opening width and US3 (605), US4 (606), US32 (629) finishes Each $ 432.00 7 29-0481-MP Dogging key Pkg. of 10 $ 33.00 8 41-0902-05-IP Metal end cap assembly, nose end Each $ 28.00 6 143.00 9 31-0964-IP Lower bolt guide assembly Each $ 9.00 10 25-0506-MP Bolt guide bushing Pkg. of 10 $ 9.00 11 S242A06-08-MP #6-32 × 1/2" cap screw, rod piercing Pkg. of 10 12 31-0944-IP Actuator, top assembly Each $ 34.00 Each $ 22.00 13 31-0945 Strike plate assembly $ $ 12.00 207.00 31-0945-MP Strike plate assembly multipack Pkg. of 10 * 91-0835-01-630 Hardware Pack Each NS 80-0180-39-01 Device template, 8500 Each Email Only NS 80-0180-39-02 Strike template, 8500 Each Email Only NS 80-0180-51 Installation sheet, 8600 Each Email Only NS = Not shown US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. $ 6.00 8675 CONCEALED VERTICAL ROD MID-PANEL EXIT DEVICE STRIKE ASS’Y 22 P/N 31-0945-MP ACTUATOR ASS’Y 21 P/N 31-0944-IP 1 UPPER BOLT P/N 26-0094 2 #10-32 X 5/16" FLAT HEAD SCREW UNDERCUT P/N S266-10R05N-XXX-MP 6 REQ'D 5 MOUNTING PLATE P/N 22-0552 2 REQ'D 3 SPIDER #6-32 X 1/2" CAP SCREW 20 P/N S242A06-08-MP 2 REQ'D P/N 25-0062-01-MP 4 CVR FINAL ASS’Y P/N 41-0675-P 6 #8-32 X 1/8" CUP POINT 7 END CAP SET SCREW P/N S232C08H02N-MP 4 REQ'D P/N 25-0471-IP 8 #10-32 X 5/8" SELF-TAPPING P/N S292-10R10-603-MP 4 REQ'D #10-32 X 2" 19 FLAT HEAD SCREW P/N S262-10R32-603-MP 9 DOGGING ASS’Y P/N 31-0265-IP 11 PUSH BAR ASS'Y 12 DOGGING KEY 10 #10-32 X 1/2" PAN HEAD SCREW P/N S277-10R08-603-MP 2 REQ'D P/N 29-0481-MP 14 #10-32 X 1/4" LINK-CRANK ASS’Y 18 P/N 31-0675 PAN HEAD SEMS SCREW P/N S277-10R04-603-MP 13 #10-32 X 1/4" PAN HEAD SCREW P/N S261-10R04N-603-MP 2 REQ'D 15 END CAP ASS’Y P/N 31-0572-IP TO DOG BAR: DEPRESS BAR AND TURN KEY 1/4 TURN CLOCKWISE BOLT GUIDE BUSHING 17 P/N 25-0506-MP 52 16 LOWER BOLT GUIDE ASS’Y P/N 31-0964-IP EXIT DEVICES DECAL 23 P/N 20-0035 R TO RELEASE: TURN KEY 1/4 TURN COUNTERCLOCKWISE 8675 CONCEALED VERTICAL ROD MID-PANEL EXIT DEVICE 8675 Concealed Vertical Rod Mid-Panel Exit Device ITEM PART NUMBER DESCRIPTION UNITS PKGD 26-0094 Upper bolt Each $ S266-10R05N-119-MP #10-32 × 5/16" flat head screw, 119 finish Pkg. of 10 $ S266-10R05N-603-MP #10-32 × 5/16" flat head screw, 603 finish Pkg. of 10 $ 3 25-0062-01-MP Spider Pkg. of 10 $ 4 41-0675-IP CVR final assembly, complete with bolts Each 5 22-0552 Mounting plate Each 1 2 6 7 8 9 10 11 12 13 14 15 16 S232C08H02N-MP 25-0471-IP S292-10R10-603-MP 31-0265-IP #8-32 × 1/8" cup point set screw End cap (hinge end) #10-32 × 5/8" self-tapping screw Dogging assembly, complete 2019 PRICE $ 10.00 13.00 11.00 22.00 158.00 $ 7.00 20.00 Pkg. of 10 $ Each $ Pkg. of 10 $ 10.00 Each $ 21.00 11.00 $ 9.00 S277-10R08-603-MP #10-32 × 1/2" pan head SEMS screw Pkg. of 10 8675 Push Bar (-PB) — 313, 335, 628 finish Push bar assembly: order by exit device Series (8675), door opening width and 313, 335, or 628 finish Each $ 8675 Push Bar (-PB) — 630 finish Push bar assembly: order by exit device Series (8675), door opening width and US32D (630) finish Each $ 382.00 8675 Push Bar (-PB) — 605, 606, 629 finish Push bar assembly: order by exit device Series (8675), door opening width and US3 (605), US4 (606), US32 (629) finishes Each $ 432.00 29-0481-MP Dogging key Pkg. of 10 S261-10R04N603-MP S277-10R04-603-MP 31-0572-IP 31-0964-IP #10-32 × 1/4" pan head screw #10-32 × 1/4" pan head SEMS screw (link) End cap assembly, nose end — complete Lower bolt guide assembly 143.00 $ 33.00 Pkg. of 10 $ Pkg. of 10 $ Each $ 9.00 11.00 20.00 Each $ 9.00 $ 9.00 17 25-0506-MP Bolt guide bushing Pkg. of 10 18 31-0675 Link-crank assembly Each 19 S262-10R32-603-MP #10-32 × 2" flat head screw Pkg. of 10 20 S242A06-08-MP #6-32 × 1/2" cap screw, rod piercing Pkg. of 10 $ 10.00 $ $ 7.00 12.00 21 31-0944-IP Actuator, top assembly Each $ 34.00 22 31-0945 Strike plate assembly Each $ 22.00 31-0945-MP Strike plate assembly multipack Pkg. of 10 23 20-0035 Decal (dogging instructions) $ 207.00 $ Each 18.00 NS 80-0180-137 Device installation sheet, 8675 Each Email Only NS 80-0180-134 Strike installation sheet, 8675 Each Email Only NS = Not shown Note: Consult factory for doors over 66" above pushbar. Note: Please contact factory for information on the 8675 CVR Midpanel Exit Device. US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. 8700 Series RIM EXIT DEVICE ** 1 STRIKE SPACER P/N 22-0481-04-MP 4 REQ'D ** 2 STRIKE SPACER P/N 22-0481-03-MP 1 REQ'D ** 3 STRIKE PLUG P/N 25-0625-MP 2 REQ'D ** 4 STRIKE P/N 22-0430-IP ** 5 #10-32 X 3/4" FLAT HEAD SCREW P/N 91-0837-02 2 REQ'D 7 METAL END CAP P/N 41-0903-IP 6 MOUNTING BASE KIT P/N 91-8800 * #10-32 X 5/8" SCREW SELF-TAPPING 4 REQ'D 8 DOGGING ASS’Y P/N 31-0265-IP CYLINDER PLATE 12 P/N 22-0480 REQ'D FOR WOOD DOOR ONLY 9 PUSH BAR ASS’Y 10 DOGGING KEY P/N 29-0481-MP * #10 X 1-1/2" ROUND HEAD SCREW METAL END CAP ASS’Y 11 P/N 41-0902-03-IP SELF-TAPPING 2 REQ'D * #10 X 1-1/4" PAN HEAD SCREW SELF-TAPPING 6 REQ'D * INCLUDED IN SCREW PACK P/N 91-0837-01 ** INCLUDED IN FRAME KIT P/N 91-0991-02 54 EXIT DEVICES 8700 Series RIM EXIT DEVICE 8700 Series Rim Exit Device ITEM PART NUMBER DESCRIPTION UNITS PKGD 2019 PRICE 1 22-0481-04-MP Strike spacer Pkg. of 10 $ 23.00 2 22-0481-03-MP Strike spacer Pkg. of 10 $ 23.00 3 25-0625-MP Strike plug Pkg. Of 2 $ 4 22-0430-IP Strike Each $ Pkg. of 2 $ 5 6 7 8 91-0837-02 91-8800 41-0903-IP #10-32 × 3/4" flat head screws Mounting base kit, includes starwheel Metal end cap assembly, hinge end 12.00 11.00 6.00 143.00 Each $ Each $ $ 23.00 21.00 31-0265-IP Dogging assembly, complete Each 8700 Push Bar (-PB) — 313, 335, 628 finish Push bar assembly: order by exit device Series (8700), door opening width and 313, 335, or 628 finish Each $ 8700 Push Bar (-PB) — 630 finish Push bar assembly: order by exit device Series (8700), door opening width and US32D (630) finish Each $ 382.00 8700 Push Bar (-PB) — 605, 606, 629 finish Push bar assembly: order by exit device Series (8700), door opening width and US3 (605), US4 (606), US32 (629) finishes Each $ 432.00 10 29-0481-MP Dogging key Pkg. of 10 $ 33.00 11 41-0902-03-IP Metal end cap assembly, latch end Each $ 28.00 12 22-0480 Cylinder plate for wood door applications Each $ Each $ 9 * 91-0837-01 Hardware pack 143.00 12.00 6.00 44.00 ** 91-0991-02-IP Frame kit for wood and hollow metal Each NS 80-0180-124-01 Device template, 3700 Each Email Only NS 80-0180-124-02 Strike template, 3700 Each Email Only NS 80-0180-40 Installation sheet, 8700 Each Email Only $ NS = Not shown US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. 8800 Series RIM EXIT DEVICE ** 1 STRIKE SPACER P/N 22-0481-04-MP 4 REQ'D ** 2 STRIKE SPACER P/N 22-0481-03-MP 1 REQ'D ** 3 STRIKE PLUG P/N 25-0625-MP 2 REQ'D ** 6 STRIKE KIT ** 4 STRIKE FOR CENTER HUNG DOORS WITH 4" JAM P/N 91-0993-P P/N 22-0430-IP ** 5 #10-32 X 3/4" FLAT HEAD SCREW P/N 91-0837-02 2 REQ'D 7 RIVNUT/TOOLS KIT P/N 41-0975-02-IP MOUNTING BASE KIT 13 P/N 91-8800 8 METAL END CAP #10-32 X 5/8" SCREW* SELF-TAPPING 4 REQ'D P/N 41-0903-IP 9 DOGGING ASS’Y P/N 31-0265-IP 10 PUSH BAR ASS’Y 11 DOGGING KEY P/N 29-0481-MP METAL END CAP ASS’Y 12 P/N 41-0902-03-IP * INCLUDED IN SCREW PACK P/N 91-0837-01 ** INCLUDED IN FRAME KIT P/N 91-0992-02-P 56 EXIT DEVICES * #10 X 1-1/2" ROUND HEAD SCREW SELF-TAPPING 4 REQ'D 8800 Series RIM EXIT DEVICE 8800 Series Narrow Stile Rim Exit Device ITEM PART NUMBER DESCRIPTION UNITS PKGD 2019 PRICE 1 22-0481-04-MP Strike spacer Pkg. of 10 $ 23.00 2 22-0481-03-MP Strike spacer Pkg. of 10 $ 23.00 3 25-0625-MP Strike plug Pkg. Of 2 $ 4 22-0430-IP Strike Each $ Pkg. of 2 $ 5 6 7 8 9 10 11 12 91-0837-02 91-0993-P 41-0975-02-IP 41-0903-IP #10-32 × 3/4" flat head screws Strike kit for center hung door with 4" jamb Rivnut tool kit assembly Metal end cap assembly, hinge end 12.00 11.00 6.00 26.00 Each $ Each $ Each $ $ 13.00 23.00 21.00 31-0265-IP Dogging assembly, complete Each 8800 Push Bar (-PB) — 313, 335, 628 finish Push bar assembly: order by exit device Series (8800), door opening width and 313, 335, or 628 finish Each $ 8800 Push Bar (-PB) — 630 finish Push bar assembly: order by exit device Series (8800), door opening width and US32D (630) finish Each $ 382.00 8800 Push Bar (-PB) — 605, 606, 629 finish Push bar assembly: order by exit device Series (8800), door opening width and US3 (605), US4 (606), US32 (629) finishes Each $ 432.00 29-0481-MP Dogging key Pkg. of 10 $ 33.00 Each $ 28.00 $ 41-0902-03-IP End cap assembly, latch end — metal 143.00 13 91-8800 Mounting base kit, includes starwheel Each NS 80-0180-125-01 Device template, 8800 Each Email Only NS 80-0180-125-02 Strike template, 8800 Each Email Only NS 80-0180-41 Installation sheet, 8800 Each Email Only * 91-0837-01 Hardware pack Each ** 91-0992-02-IP Frame kit for aluminum Each 143.00 $ $ 6.00 73.00 NS = Not shown US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. Accessories FOR EXIT DEVICES MONITORING KITS “M” 1 MICRO SWITCH P/N 31-0186-01 2 #6-32 X 3/8" ROUND HEAD SCREW SELF-TAPING P/N S282-06R06-603-MP MONITOR SWITCH KIT 3 SINGLE SWITCH P/N 91-0897-01 OR DUAL SWITCH P/N 91-0897-02 CYLINDER DOGGING “C” 4 CYLINDER P/N 4036-01-01-XXX 5 DOGGING ASS’Y P/N 31-0265-01-IP ANTI-ROTATION RING LOCKING NUT LOCKING NUT TOOL 58 EXIT DEVICES 6 CYLINDER KIT P/N 91-0099-IP Accessories FOR EXIT DEVICES Accessories for Exit Devices ITEM PART NUMBER DESCRIPTION UNITS PKGD Micro switch assembly with wires Each 2019 PRICE Monitoring Kits "M" 1 2 31-0186-01 $ 73.00 9.00 S282-06R06-603-MP #6-32 × 3/8" round head self-tapping screw Pkg. of 10 $ 91-0897-01 Single switch monitor kit (includes: monitor switch assembly, screws, wire nuts and installation instructions) Each List 91-0897-02 Dual switches monitor kit (includes: monitor switch assembly, screws, wire nuts and installation instructions) Each List 4036-01-01-313 Mortise cylinder, 313 finish Each List 4036-01-01-335 Mortise cylinder, 335 finish Each List 4036-01-01-628 Mortise cylinder, 628 finish Each 5 31-0265-01-IP Dogging Assembly Each $ 6 91-0099-IP Cylinder kit Each $ 3 Cylinder Dogging "C" 4 List 21.00 17.00 List = Refer to current pricelist US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. 7100 ELECTRIC STRIKE 8 #2 X 3/8" PHILLIPS SWITCH PLATE 7 P/N 22-0713 HEX HEAD P/N 29-0342-MP LATCH 6 P/N 27-0085 SHUTTLE RETURN SPRING 4 P/N 28-0150-MP NUT PLATE 9 P/N 22-0698-MP BLOCKING ARM 5 P/N 27-0086 SOLENOID 3 P/N 29-0250-12XXX-IP COVER 1 P/N 23-0350 OR P/N 23-0351 PLUNGER 2 P/N 26-0170 10 MICRO SWITCH P/N 31-0092 11 BOLT SWITCH ACTUATOR P/N 23-0349 14 SOLENOID RETAINER PLATE P/N 22-0657 16 SHUTTLE P/N 23-0356 15 BLOCKING ARM RETURN SPRING P/N 28-0151-MP 17 SUB COVER P/N 23-044X 18 SUBCOVER EXTENSION KIT 19 #6-32 X 1/4" PHILLIPS FLAT HEAD P/N S235-06R04N-603-MP 2 REQ'D 60 P/N 91-0171-XX-P OR P/N 91-0172-XX ELECTRIC STRIKES 12 #2 X 5/8" HEX HD. PHILLIPS P/N 29-0341-MP 2 REQ'D. 13 SHOULDER SCREW P/N 26-0214-MP 7100 ELECTRIC STRIKE 7100 Electric Strike ITEM PART NUMBER DESCRIPTION UNITS PKGD 1 23-0350 Back cover 1/2" (7100, 7101, 7110, 7111, 7130, 7131, 7140) Each $ 12.00 23-0351 Back cover 3/4" (7160, 7170) Each $ 12.00 2 26-0170 Plunger Each $ 29-0250-12ACI-IP Solenoid; 12 VAC intermittent Each $ 48.00 29-0250-12DCC-IP Solenoid; 12 VDC continuous / 24 VAC intermittent Each $ 48.00 Each $ 48.00 Each $ 48.00 Each $ 48.00 Pkg. of 10 $ 11.00 Each $ 11.00 3 29-0250-16ACI-IP 29-0250-16DCC-IP 29-0250-24DCC-IP 4 5 28-0150-MP 27-0086 Solenoid; 16 VAC intermittent Solenoid; 16 VDC continuous Solenoid; 24 VDC continuous Shuttle return spring Blocking arm 2019 PRICE 6.00 7.00 6 27-0085 Latch Each $ 7 22-0713 Switch plate Each $ 5.00 6.00 8 29-0342-MP #2 × 3/8" Phillips hex head Pkg. of 10 $ 9 22-0698-MP Nut plate Pkg. of 10 $ 10 31-0092 Microswitch Each $ 11 23-0349 Bolt switch actuator Each $ 10.00 12 29-0341-MP #2 × 5/8" Phillips hex head Pkg. of 10 $ 10.00 Pkg. of 10 $ Each $ 11.00 Pkg. of 10 $ 11.00 Each $ 13 14 15 16 26-0214-MP 22-0657 28-0151-MP 23-0356 23-0443 17 Shoulder screw Solenoid retainer plate Blocking arm return spring Shuttle Subcover, 1/2" flat (7100, 7110, 7111, 7130, 7140) 12.00 92.00 46.00 7.00 18.00 Each $ 18.00 21.00 23-0444 Subcover, 1/2" radius (7101, 7131) Each $ 23-0445 Subcover, 3/4" (7160, 7170) Each $ 18* 91-0171-XX-P Subcover lip extension kit (7100, 7110, 7111, 7130, 7140) Each 91-0172-XX-P Subcover lip extension kit (7160, 7170) Each List 19 S235-06R04N-603-MP #6-32 × 1/4" flat head screw Pkg. of 10 $ 91-0077-01-335 Mounting kit (2-mounting tabs, 2-mounting screws, 2-press nuts, adhesive shims, 2-wire nuts), 335 finish Each $ 15.00 91-0077-01-603 Mounting kit (2-mounting tabs, 2-mounting screws, 2-press nuts, adhesive shims, 2-wire nuts), 603 finish Each $ 15.00 NS List 6.00 List = Refer to current pricelist NS = Not shown Note: *Item #18 (above) Specify lip extension requirements, refer to catalog for "A" dimension. Extensions provided in 1/8" increments beginning with -01 for a 3/8" extension. US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. 3080 Series ENTRY TRIM #6-32 X 3/8" 12 FLAT HEAD SCREW P/N S227-06R06N-119-MP TRIM COVER 11 P/N 23-0202-01 2 REQ'D 1 LEVER KITS TRIM HOUSING 10 W/ CYLINDER HOLE P/N 22-0763-01-XXX OR W/OUT CYLINDER HOLE P/N 22-0763-02-XXX STANDARD P/N 31-0991-XX-XXX-IP CURVED #4-40 X 1/4" 9 PAN HEAD SCREW SELF-TAPPING P/N S256-04R04-603-MP ROUND RETAINING RING 8 P/N 23-0736 MOUNTING SCREW KIT 7 P/N 91-0302-XXX-(I)P SQUARE 2 HANDLE BUSHING HANDING SCREW 6 P/N 26-0249-N-MP 2 REQ’D P/N 26-0381-01-XXX WASHER 5 P/N W414B23-MP 2 REQ’D 13 G86 TRIM ADAPTER KIT P/N 91-0686 HEX NUT 4 P/N N315-07-603-MP DOWEL PIN 3 P/N 26-0435-MP 2 REQ’D 14 CVR ADAPTER KIT P/N 91-0160-P 18 SOLENOID ASS’Y. P/N 31-0993-X-IP 15 CVR SPINDLE KIT (FOR CVR DEVICES MFG PRIOR 2/1997) P/N 91-0301-01-IP 62 TRIM 16 MORTISE SPINDLE KIT P/N 91-0301-02-IP 17 SVR / RIM / INSET SPINDLE KIT P/N 91-0301-03-IP 3080 Series ENTRY TRIM 3080 Series Entry Trim ITEM 1 PART NUMBER 4 2019 PRICE 31-0991-02-10B-IP Round handle kit, US10B (613) finish Each $ 92.00 Round handle kit, US32D (630) finish Each $ 92.00 31-0991-03-10B-IP Square handle kit, US10B (613) finish Each $ 92.00 31-0991-03-630-IP Square handle kit, US32D (630) finish Each $ 92.00 Each $ 92.00 Each $ 92.00 Each $ 10.00 Each $ 10.00 Pkg. of 10 $ 15.00 31-0991-01-630-IP 3 UNITS PKGD 31-0991-02-630-IP 31-0991-01-10B-IP 2 DESCRIPTION 26-0381-01-121 26-0381-01-626 26-0435-MP Curved handle kit, US10B (613) finish Curved handle kit, US32D (630) finish Handle bushing, 121 finish Handle bushing, US26D (626) finish Dowel pin N315-07-603-MP Hex nut with nylon insert $ Pkg. of 10 9.00 12.00 5 W414B23-MP Washer Pkg. of 10 $ 6 26-0249N-MP Handing screw Pkg. of 10 $ 7 91-0302-121-IP Mounting screw kit for US3 (605), US4 (606), and US26 (625) finishes Each $ 38.00 91-0302-603-IP Mounting screw kit for US10B (613) and US26D (626) finishes Each $ 28.00 8 23-0736 Retaining ring Each $ 9 S256-04R04-603-MP #4-40 × 1/4 pan head self-tapping screw Pkg. of 10 $ 22-0763-01-121PC Trim housing with cylinder hole, matches US10B (613) finish Each $ 38.00 22-0763-01-630 Trim housing with cylinder hole, US32D (630) finish Each $ 38.00 Each $ 38.00 Each $ 38.00 Each $ 10 22-0763-02-121PC 22-0763-02-630 11 12 23-0202-01 Trim housing without cylinder hole, matches US10B (613) finish Trim housing without cylinder hole, US32D (630) finish Trim cover S227-06R06N-119-MP #6-32 × 3/8" flat head screw Pkg. of 10 15 91-0301-01 CVR spindle kit for devices manufactured prior to 1997 Each 16 91-0301-02 Mortise spindle kit Each $ 18 13 14 NS 6.00 7.00 13.00 $ $ 17 53.00 9.00 35.00 26.00 $ 11.00 91-0301-03 SVR / rim / inset spindle kit Each 31-0993-1 Solenoid assembly 24VDC fail-safe Each $ 493.00 31-0993-2 Solenoid assembly 12VDC fail-safe Each $ 493.00 31-0993-3 Solenoid assembly 24VDC fail-secure Each $ 493.00 31-0993-4 Solenoid assembly 12VDC fail-secure Each $ 493.00 91-0686 Trim kit adapter for G86 exit device 32.00 Each $ $ 10.00 91-0160-IP CVR tailpiece adapter kit Each 91-0118 Tactile strip kit for standard Series levers 01, 03 Each List 80-0180-301-01 Stick-on template, SVR Each Email Only 80-0180-301-02 Stick-on template, mortise / mortise inset Each Email Only 80-0180-301-03 Stick-on template, CVR Each Email Only 80-0180-301-04 Stick-on template, rim Each Email Only 80-0180-301-05 Stick-on template, inset CVR Each Email Only 80-0180-301-08 Stick-on template, wood door CVR Each Email Only 80-0180-3080 Installation instructions Each Email Only List = Refer to current pricelist NS = Not shown Note: Solenoid assemblies can only be used in electrified 3080E Entry Trim. US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. eForce®-150 3090 KEYLESS ENTRY 1 MOUNTING KIT P/N 91-0079-IP 2 MORTISE KIT DEADLOCK P/N 91-0459-01-IP TORX SET SCREW 10 1/4"-28 X 1/4" P/N 26-0658 3 CVR KIT P/N 91-0160-P CURVED HANDLE 9 P/N 23-0743-XXX BATTERY PACK ASS’Y 8 P/N 31-0355-IP 4 MORTISE KIT DEADLATCH P/N 91-0459-02-IP 6 BATTERY COVER SHIELD P/N 25-0179 7 BATTERY LID ASS’Y P/N 31-0329-XXX-IP 64 TRIM 5 RIVNUT TOOL ASS’Y P/N 41-0975-04 eForce®-150 3090 KEYLESS ENTRY eForce®-150 3090 Keyless Entry ITEM PART NUMBER DESCRIPTION UNITS PKGD 2019 PRICE 1 91-0079 Mounting kit Each $ 2 91-0459-01 Mortise kit, deadlock Each $ 15.00 27.00 3 91-0160-P CVR tailpiece adapter kit Each $ 10.00 4 91-0459-02 Mortise kit, deadlatch Each $ 27.00 5 41-0975-04 Rivnut tool kit assembly Each $ Each $ 6 7 8 9 10 25-0179 31-0329-626 31-0329-121PC-IP 31-0355 23-0743-626 Battery cover, plastic shield Battery lid assembly, US26D (626) finish Battery lid assembly, 121 dark bronze finish Battery pack assembly Curved handle US26D (626) finish 14.00 6.00 Each $ 30.00 Each $ 30.00 Each $ 23.00 Each $ 46.00 $ 46.00 23-0743-121PC Curved handle 121 finish Each 26-0658 Torx set screw 1/4"-28 x 1/4" Each US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. $ 6.00 4550 MS® DEADLOCK LEVER STOP PLATE 5 P/N 22-0656 1 RETURN SPRING BUSHING P/N 26-0157-MP 2 #10-32 X 3/8" FLAT HEAD SCREW P/N S262C10R06N630-MP 3 HANDLE RETURN SPRING P/N 28-0019-MP 4 #6-32 X 5/16" PAN HEAD SCREW P/N S222-06R05N603-MP 4 REQ'D 6 CAM PLUG ASS’Y P/N 91-0752 7 #6-32 X 1/2" SOCKET HEAD CAP SCREW P/N S242BA06-08 2 REQ’D 8 #10-32 X 3/4" PAN HEAD SEMS SCREW P/N S277-10R12-603-MP 4 REQ'D 9 EXIT INDICATOR SPRING P/N 28-0008-MP EXIT 11 INDICATOR PIN P/N 26-0455-MP 66 TRIM 10 EXIT INDICATOR SPRING P/N 28-0008-01-MP 4550 MS DEADLOCK LEVER ® 4550 Deadlock Lever ITEM PART NUMBER DESCRIPTION UNITS PKGD 2019 PRICE 35.00 1 26-0157-MP Return spring bushing Pkg. of 10 2 S262C10R06N630-MP #10-32 × 3/8" flat head screw Pkg.of 10 3 28-0019-MP Handle return spring Pkg. of 10 4 S222-06R05N603-MP #6-32 × 5/16" pan head screw Pkg.of 10 $ 6.00 Each $ 6.00 5 6 7 8 9 10 22-0656 91-0752 S242BA06-08 S277-10R12-603-MP 28-0008-MP 28-0008-01-MP Stop plate Cam plug assembly kit, clutched MS lever #6-32 × 1/2 socket head cap screw #10-32 × 3/4" pan head SEMS screw Exit indicator spring Exit indicator spring for 2 or 3 point locks Each $ $ $ $ 9.00 38.00 84.00 6.00 Each $ Pkg. of 10 $ 7.00 Pkg. of 10 $ 15.00 Pkg. of 10 $ 15.00 $ 84.00 11 26-0455-MP Exit indicator pin for 2 or 3 point locks Pkg. of 10 NS 80-0180-455 Stick-on template Each Email Only NS 80-0180-460 Installation instructions Each Email Only NS = Not shown US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. 4590 DEADLATCH PADDLE 9 BINDER POST P/N 26-0188-09-MP 1 “PULL” INDICATOR P/N 20-0399-01 OR “PUSH” INDICATOR P/N 20-0399-02 2 #8-32 X 1/2" TRUSS HEAD SCREW P/N S236-08R08-603-MP 1/4"-28 LOCKNUT 8 P/N 29-0546-MP P U S H SHAFT 7 P/N 26-0055 3 SPRING CLIP 3/8"-24 SET SCREW 6 P/N 26-0398N-MP P/N 28-0070-MP 4 RETURN DRIVER SCREW 5 P/N 26-0383N-MP 68 TRIM SPRING KIT P/N 91-0060 4590 DEADLATCH PADDLE 4590 Deadlatch Paddle ITEM PART NUMBER DESCRIPTION UNITS PKGD 1 20-0399-01 PULL indicator Each $ 6.00 20-0399-02 PUSH indicator Each $ 6.00 2 S236-08R08-603-MP #8-32 × 1/2 truss head screw with lockwasher Pkg. of 10 $ 6.00 3 28-0070-MP Spring clip Pkg. of 10 $ 6.00 Each $ 9.00 4 5 6 7 8 91-0060 26-0383N-MP 26-0398N-MP 26-0055 29-0546-MP Return spring kit, includes all four springs Driver screw 3/8"-24 set screw Shaft Pkg. of 10 $ Pkg. of 10 $ Each 1/4-28 Locknut 2019 PRICE 75.00 28.00 $ Pkg. of 10 $ $ 5.00 15.00 20.00 9 26-0188-09-MP Binder post Pkg. of 10 NS 80-0180-200 Instruction sheet, 4590 Each Email Only NS 80-0180-201 Instruction sheet, 4590M Each Email Only NS 80-0180-202 Instruction sheet, 4590MA Each Email Only NS = Not shown US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. 4591 DEADLATCH PADDLE 1 DOGGING KEY P/N 29-0481-MP 15 BINDER POST P/N 26-0488-MP 2 REQ'D 14 5/16"-24 JAM NUT P/N N307-516-MP 2 REQ'D 2 DOGGING SCREW P/N 31-0079-MP 3 BUSHING P/N 27-0065 4 DRIVE SHAFT P/N 26-0366-XX 5 #10-24 X 1" PAN HEAD SCREW P/N S277-10R16-603-MP 2 REQ'D MONITORING KIT 13 P/N 91-0914 DRIVER SCREW 10 P/N 26-0383N-MP SHAFT 12 P/N 26-0055 RETURN 9 SPRING KIT P/N 91-0060 6 LABEL 8 SPRING CLIP P/N 28-0070-MP 2 REQ'D 3/8"-24 SET SCREW 11 P/N 26-0398N-MP 70 TRIM P/N 20-0099 7 PADDLE ASS’Y P/N 41-0119-XXX 4591 DEADLATCH PADDLE 4591 Deadlatch Paddle ITEM PART NUMBER DESCRIPTION UNITS PKGD 2019 PRICE 1 29-0481-MP Dogging key Pkg. of 10 $ 33.00 2 31-0079-MP Dogging screw Pkg. of 10 $ 29.00 10.00 3 27-0065 Bushing Each $ 4 26-0366-01 Drive shaft for 1-3/4" doors Each $ Each $ 26-0366-XX 5 S277-10R16-603-MP 6 20-0099 7 41-0119-313 41-0119-335 41-0119-628 Drive shaft for doors over 1-3/4", specify door thickness #10-24 × 1" truss head screw with lockwasher “PUSH" & "PULL” indicator label Paddle assembly, 313 finish Paddle assembly, 335 finish Paddle assembly, 628 finish 13.00 26.00 Pkg. of 10 $ 9.00 Each $ 5.00 Each $ 63.00 Each $ 63.00 Each $ 63.00 8 28-0070-MP Spring clip Pkg. of 10 $ 9 91-0060 Return spring kit, includes all four springs Each $ 10 26-0383N-MP Driver screw Pkg. of 10 $ $ 6.00 9.00 75.00 11 26-0398N-MP 3/8"-24 set screw Pkg. of 10 12 26-0055 Shaft Each $ 13 91-0914 Monitoring kit Each List 14 N307-516-MP 5/16-24 jam nut Pkg. of 10 15 26-0488-MP Binder post Pkg. of 10 NS 80-0180-4591 Instruction sheet, 4591 Each Email Only NS 80-0180-4591M Instruction sheet, 4591M Each Email Only NS 80-0180-4591MA Instruction sheet, 4591MA Each Email Only List = Refer to current pricelist NS = Not shown US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. 28.00 $ $ 5.00 6.00 30.00 4600 HEAVY DUTY DEADLATCH HANDLES 1 LOCK COVER PLATE P/N 22-9153-01R OR P/N 22-9153-01-121 2 TRIM COVER KIT P/N 91-0481-US32D 3 LEVER KITS STANDARD P/N 31-0991-XX-XXX-IP OR DESIGNER P/N 31-1010-XXX-XXXX-IP CURVED ROUND 4 CAM PLUG 1-3/4" P/N 4581-01-IP SQUARE 5 MOUNTING KIT – 1-3/4" P/N 91-0482-1X-IP 72 TRIM 4600 HEAVY DUTY DEADLATCH HANDLES 4600 Series Heavy Duty Designer Deadlatch Handles ITEM PART NUMBER DESCRIPTION UNITS PKGD 1 22-9153-01R Lock cover plate, shim, US32D (630) finish Each $ 10.00 22-9153-01-121 Lock cover plate, shim, 121 finish Each $ 12.00 2 91-0481-US32D Trim cover kit, US32D (630) finish Each $ 63.00 31-0991-02-10B -IP Round lever kit, US10B (613) finish Each $ 92.00 Each $ 92.00 Each $ 92.00 Each $ 92.00 Each $ 92.00 Each $ 92.00 Each $ 144.00 144.00 31-0991-02-630-IP 31-0991-03-10B-IP 31-0991-03-630-IP 31-0991-01-10B-IP 31-0991-01-630-IP 31-1010-MD0-10B-IP 3 Square lever kit, US32D (630) finish Curved lever kit, US10B (613) finish Curved lever kit, US32D (630) finish Designer lever kit, Centro Series MD, 10B (613) finish 31-1010-MD0-US32D-IP Designer lever kit, Centro Series MD, US32D (630) finish Each 31-1010-ME0-10B-IP Designer lever kit, Aventura Series ME, 10B (613) finish Each $ 144.00 31-1010-ME0-US32D-IP Designer lever kit, Aventura Series ME, US32D (630) finish Each $ 144.00 31-1010-MG0-10B-IP Designer lever kit, Aventura Series MG, 10B (613) finish Each $ 144.00 31-1010-MG0-US32D-IP Designer lever kit, Aventura Series MG, US32D (630) finish Each $ 144.00 31-1010-MI0-10B-IP Designer lever kit, Aventura Series MI, 10B (613) finish Each $ 144.00 31-1010-MI0-US32D-IP Designer lever kit, Aventura Series MI, US32D (630) finish Each $ 144.00 Each $ 144.00 Each $ 144.00 Each $ 144.00 Each $ 144.00 Each $ 144.00 144.00 31-1010-MJ0-US32D-IP 31-1010-MN7-10B-IP 31-1010-MN7-US32D-IP 31-1010-MN8-10B-IP-IP 5 Square lever kit, US10B (613) finish $ 31-1010-MJ0-10B-IP 4 Round lever kit, US32D (630) finish 2019 PRICE Designer lever kit, Centro Series MJ, 10B (613) finish Designer lever kit, Centro Series MJ, US32D (630) finish Designer lever kit, Odeon Series MN, left hand, 10B (613) finish Designer lever kit, Odeon Series MN, left hand, US32D (630) finish Designer lever kit, Odeon Series MN, right hand, 10B (613) finish 31-1010-MN8-US32D-IP Designer lever kit, Odeon Series MN, right hand, US32D (630) finish Each $ 31-1010-MV7-10B-IP P Designer lever kit, Odeon Series MV, left hand, 10B (613) finish Each $ 144.00 31-1010-MV7-US32D-IP Designer lever kit, Odeon Series MV, left hand, US32D (630) finish Each $ 144.00 31-1010-MV8-10B-IP Designer lever kit, Odeon Series MV, right hand, 10B (613) finish Each $ 144.00 31-1010-MV8-US32D-IP Designer lever kit, Odeon Series MV, right hand, US32D (630) finish Each $ 144.00 31-1010-MW0-10B-IP Designer lever kit, Aventura Series MW, 10B (613) finish Each $ 144.00 31-1010-MW0-US32D-IP Designer lever kit, Aventura Series MW, US32D (630) finish Each $ 144.00 4581-01 Cam plug 1-3/4" Each 91-0482-11-IP Mounting kit, 1-3/4" door thickness Each $ 57.00 91-0482-12-IP Mounting kit, 2" door thickness Each $ 57.00 Each $ 57.00 $ 57.00 91-0482-13-IP Mounting kit, 2-1/4" door thickness List 91-0482-14-IP Mounting kit, 2-1/2" door thickness Each NS 80-0180-417 Installation instructions Each Email Only NS 80-0180-416 Template Each Email Only List = Refer to current pricelist NS = Not shown US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. 4024/4025/4026 CYLINDER PULLS 1 RETAINER CLIP P/N 22-0062 #10-32 X 1/2" 3 ROUND HEAD SCREW P/N S263-10R08-603-MP OR P/N S235-06R06-603-MP 2 INSERT CYLINDER P/N 29-0400-00-01 4 #10-32 X 1-3/4" FLAT HEAD SCREW P/N S262-10R28-603-MP 2 REQ'D 74 CYLINDERS 4024/4025/4026 CYLINDER PULLS 4024/4025/4026 Cylinder Pulls ITEM PART NUMBER DESCRIPTION UNITS PKGD 1 22-0062 Retainer clip Each 2 29-0400-00-01 Insert cylinder Each S263-10R08-603-MP #10-32 × 1/2" round head screw Pkg. of 10 $ 6.00 S235-06R06-603-MP #6-32 × 3/8" flat head undercut screw (4024) Pkg. of 10 $ 6.00 S262-10R28-603-MP #10-32 × 1-3/4" flat head screw, 4025/4026 Pkg. of 10 $ Each $ 3 4 NS 26-0252-50-130 Mounting screws — 4025 cylinder × cylinder, 2 required 2019 PRICE $ $ 5.00 32.00 7.00 9.00 NS = Not shown US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. Accessories & Cylinders 1 TUBE SPACER P/N 26-0009-XX 2 TRIM RING P/N 24-0007-XX-XXX 3 MORTISE THUMBTURN P/N 4066-01-XXX 4 RIM CYLINDER P/N 8736-01-01-XXX MORTISE CYLINDER 5 P/N 4036-01-01-XXX CYLINDER 6 ESCUTCHEON KIT P/N 8650-XXX CAM PLUG P/N 4581-01-IP 76 7 ACCESSORIES & CYLINDERS Accessories & Cylinders Accessories ITEM PART NUMBER DESCRIPTION UNITS PKGD 26-0009-44 Tube spacer 1-3/8" Each $ 15.00 Each $ 15.00 15.00 26-0009-46 1 26-0009-50 Tube spacer 1-9/16" Each $ 26-0009-52 Tube spacer 1-5/8" Each $ 15.00 26-0009-57 Tube spacer 1-25/32" Each $ 15.00 26-0009-62 Tube spacer 1-15/16" Each $ 15.00 26-0009-64 Tube spacer 2" Each $ 15.00 26-0009-164 Tube spacer 1-41/64" Each $ 15.00 24-0007-02-628 Trim ring, 1/8", 628 finish Each $ 13.00 Each $ 13.00 Each $ 13.00 Each $ 13.00 Each $ 13.00 $ 13.00 24-0007-03-628 2 24-0007-04-313 24-0007-04-628 24-0007-09-313 3 4 5 6 7 Tube spacer 1-7/16" 2019 PRICE Trim ring, 3/16", 628 finish Trim ring, 1/4", 313 finish Trim ring, 1/4", 628 finish Trim ring, 3/8", 313 finish 24-0007-09-628 Trim ring, 3/8", 628 finish Each 4066-01-130 Mortise thumbturn, 130 finish Each List 4066-01-313 Mortise thumbturn, 313 finish Each List 4066-01-335 Mortise thumbturn, 335 finish Each List 8736-01-01-313 Rim cylinder, 313 finish Each List 8736-01-01-335 Rim cylinder, 335 finish Each List 8736-01-01-628 Rim cylinder, 628 finish Each List 4036-01-01-313 Mortise cylinder, 313 finish Each List 4036-01-01-335 Mortise cylinder, 335 finish Each List 4036-01-01-628 Mortise cylinder, 628 finish Each List 8650-119 Cylinder escutcheon kit, 119 finish Each List 8650-121 Cylinder escutcheon kit, 121 finish Each List 8650-130 Cylinder escutcheon kit, 130 finish Each List 8650-313 Cylinder escutcheon kit, 313 finish Each List 8650-335 Cylinder escutcheon kit, 335 finish Each List 8650-628 Cylinder escutcheon kit, 628 finish Each List 8650-US3 Cylinder escutcheon kit, US3 (605) finish Each List 8650-US4 Cylinder escutcheon kit, US4 (606) finish Each List 8650-US32 Cylinder escutcheon kit, US32 (629) finish Each List 8650-US32D Cylinder escutcheon kit, US32D (630) finish Each List 4581-01 Cam plug 1-3/4" Each List List = Refer to current pricelist US adamsrite.com | 800.872.3267 | customerservice.adamsrite@assaabloy.com CANADA assaabloydss.ca | 800.461.3007 | sales.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. USA 800 872 3267 | f: 800 232 7329 | adamsrite.com customerservice.adamsrite@assaabloy.com techsupport.adamsrite@assaabloy.com orders.adamsrite@assaabloy.com Canada 800 461 3007 | f. 800 461 8989 | assaabloydss.ca sales.dss.ca@assaabloy.com orders.dss.ca@assaabloy.com Patent pending and/or patent www.assaabloydss.com/patents. Copyright © 2019, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. AR-052-1019
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Language : en-US XMP Toolkit : Adobe XMP Core 5.6-c148 79.163765, 2019/01/24-18:11:46 Create Date : 2019:10:24 07:38:40-07:00 Metadata Date : 2019:10:24 07:39:13-07:00 Modify Date : 2019:10:24 07:39:13-07:00 Creator Tool : Adobe InDesign 14.0 (Macintosh) Instance ID : uuid:408d774c-47de-864e-bce7-871149c968c5 Original Document ID : xmp.did:ed8af764-4878-f44f-976e-6f51fcdbe14f Document ID : xmp.id:f6cd477a-6c40-4c65-b9de-183ce35d300c Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:395b1650-3e4d-41c6-abc4-dca1aa9c7448 Derived From Document ID : xmp.did:38fc3a1a-5e9f-4d05-9ea5-a1994d653f8a Derived From Original Document ID: xmp.did:ed8af764-4878-f44f-976e-6f51fcdbe14f Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 14.0 (Macintosh) History Changed : / History When : 2019:10:24 07:38:40-07:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Layout : SinglePage Page Count : 78 Creator : Adobe InDesign 14.0 (Macintosh)EXIF Metadata provided by EXIF.tools