Adaptrum ACRS2F-B1 Fixed TV Band Device User Manual Base

Adaptrum, Inc Fixed TV Band Device Users Manual Base

Contents

Users Manual Base

Initial Base Setup
FCC / OFCOM Database Mode
© 2017 Adaptrum, Inc.
QUICK START GUIDE v1.5
Initial Base Setup | 2
1. Select device from dropdown menu and open GUI
2. Fill out all information in form shown below
For OFCOM: Add Authorization Key provided by Nominet
3. Save All Settings to Target and Reboot (wait 60 seconds)
4. Open GUI and select device from dropdown menu
5. Wait for Channel list to come up
6. Select any channel from database channel dropdown list
Database Mode: Base(FCC/OFCOM) mode(1)
ACRS 2.0 Base Initial Setup
Location
Information
Registration
Information
Network
Settings
OFCOM ONLY: Authentication Token
Select a Channel
Get Channel List Again
Initial Base Setup | 3
7. Select the Diagnostics Tab
8. Measure Available DB Channel Quality and pick a channel with the smallest number/greenest bar
9. Select the Database Tab and click Reset Channel Request
10. Select chosen channel from dropdown list
11. Click Start Service to begin broadcasting
12. Select Persistent Channel if device should maintain service even after power cycle
For OFCOM: Do not use Persistent Channel and keep GUI open so that GUI can notify database
of any changes.
13. Save and Reboot to commit all changes
14. Proceed to congure Adaptrum Clients
Persistent Channel Start Service
Measure Channel Quality
Lower number is better
Copyright © 2017 Adaptrum, Inc.
408 850 9996 adaptrum.com
1. Client Yagi antennas should all be pointed directly at the Base Panel antenna
2. All Client antennas must be within a 120-degree arc
3. The Base antenna direction should point towards the center of the Clients’ sector
Panel to Multi-Yagi Client Installations
Antenna Orientation
Base
Panel Antenna
Client Yagi
Antenna

Navigation menu