Ademco 8DL5802AP Security Alarm Transmitter User Manual N7131 3V1

Download:
Mirror Download [FCC.gov]
Document ID	915291
Application ID	WPxsLNDl2sM8/dg5flIOIg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	29.19kB (364895 bits)
Date Submitted	2008-03-17 00:00:00
Date Available	2008-03-17 00:00:00
Creation Date	2008-02-28 08:17:13
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2008-02-28 08:17:21
Document Title	Microsoft Word - N7131-3V1.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	E311757

N7131-3V1 2/08 Rev. A
3V
LITHIUM
ADEMCO 5802AP
SUPERVISED
MINIATURE TRANSMITTER
INSTALLATION AND SETUP GUIDE
▲
The 5802AP has a unique serial number permanently
assigned during manufacture, which must be enrolled
in the system during installation. The 5802AP can be
programmed as “supervised” or “unsupervised,” but
should be programmed as “unsupervised” if it will be
removed from the premises.
See the control unit’s installation instructions for
further details regarding programming.
▲
Back of 5802AP
LED: Lights when unit
transmits.
Battery: Duracell
DL2032, Panasonic
CR2032, Renata
CR2032, Varta CR2032
or Maxell CR2032.
Battery access is via a
quarter-turn of slot in
case back.
Note battery polarity: +V
UP!
REFER TO THE INSTALLATION INSTRUCTIONS FOR THE
RECEIVER/CONTROL WITH WITCH THIS DEVICE IS USED
FOR WARRANTY INFORMATION, AND FOR DETAILS
REGARDING THE LIMITATIONS OF THE ENTIRE ALARM
SYSTEM.
FCC / IC STATEMENT
This device complies with Part 15 of the FCC Rules,
and RSS210 of IC.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
The user shall not make any changes or modifications to
the equipment unless authorized by the installation
Instructions or User's Manual.
Unauthorized changes or modifications could void the
user's authority to operate the equipment.
SPECIFICATIONS
Transmission Frequency: 315MHz
Unit Dimensions: 61mm x 38mm x 12.7mm
5802AP-001-V0
▲
▲
▲
▲
PROGRAMMING
▲
▲
The 5802AP is powered by a long-life lithium battery
that should be replaced when a low battery is indicated
by the control unit.
NOTE: Although the 5802AP is water-resistant,
please do not submerge.
Battery
Remove
battery Slide
cover
battery
under
pin
▲
BATTERY REPLACEMENT
CR2032
▲
The ADEMCO 5802AP is a wireless button transmitter
that may be worn on a belt or around the neck (both
belt and necklace are included). Pressing the button on
the transmitter sends a signal to the control receiver.
The 5802AP is designed for use in wireless systems
that support 5800AP series devices.
The transmitter is “supervised,” i.e., every 70-90
minutes, it automatically sends a check-in message to
the control that includes battery status information.
RENATA
ÊN7131-3V1gŠ
N7131-3V1 2/08 Rev. A
2 Corporate Center Drive, Suite 100
P.O. Box 9040
Melville, NY 11747

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2008:02:28 08:17:13
Producer                        : Acrobat Distiller 4.05 for Windows
Author                          : E311757
Creator                         : PScript5.dll Version 5.2.2
Title                           : Microsoft Word - N7131-3V1.doc
Modify Date                     : 2008:02:28 08:17:21-05:00
Page Count                      : 1

EXIF Metadata provided by EXIF.tools