Ademco 8DLLRS500 Lyric Smart Peripheral - Siren User Manual Quick Install Guide

Download:
Mirror Download [FCC.gov]
Document ID	2730884
Application ID	zakKHntdgweZ1r5e1oQ36w==
Document Description	Quick Install Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	53.66kB (670700 bits)
Date Submitted	2015-08-28 00:00:00
Date Available	2016-02-24 00:00:00
Creation Date	2015-08-05 12:48:10
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2015-08-21 15:21:40
Document Title	Quick Install Guide
Document Creator	Acrobat PDFMaker 11 for Word
Document Author:	E727032

PLEASE GO TO THE LAST PAGE FOR FCC/IC
AGENCY STATEMENTS
LEDS and SOUNDERS / LEDS and SOUNDERS / LEDS and SOUNDERS / LEDS
and SOUNDERS
This wireless siren/strobe is
intended for use with Honeywell
controls that support SiX™ series
devices.
FC: This wireless siren/strobe is
intended for use with Honeywell
controls that support SiX™ series
devices.
SP This wireless siren/strobe is
intended for use with Honeywell
controls that support SiX™ series
devices.
PA: This wireless siren/strobe is
intended for use with Honeywell
controls that support SiX™ series
devices.
R/W
SIREN
G/W
Sounder
OPEN /
OPEN / OPEN
Status
Power Up – Enrollment /
Power Up – Enrollment /
Power Up – Enrollment /
Power Up – Enrollment
Power Up – Device
Power Up – Device
Power Up – Device
Power Up – Device
NOTE: Once enrolled, the
device cannot be used with
another system until it is
removed from the current
controller. See the controller’s
instructions,
System
System
System
System
FC: NOTE: Once enrolled, the
device cannot be used with
another system until it is
removed from the current
controller. See the controller’s
instructions,
SP: NOTE: Once enrolled, the
device cannot be used with
another system until it is
removed from the current
controller. See the controller’s
instructions,
3 sec
PA: NOTE: Once enrolled, the
device cannot be used with
another system until it is
removed from the current
controller. See the controller’s
instructions.
3 sec
Enroll / Enroll / Enroll / Enroll
enrolled /
enrolled /
enrolled/
enrolled
is Disarmed /
is Disarmed /
is Disarmed /
is Disarmed
System is Armed /
System is Armed /
System is Armed /
System is Armed
Smoke or CO Alarm /
Smoke or CO Alarm /
Smoke or CO Alarm /
Smoke or CO Alarm
Burglary Alarm /
Burglary Alarm /
Burglary Alarm /
Burglary Alarm
Low Battery / Low Battery /
Low Battery / Low Battery
Tamper Activated /
Tamper Activated /
Tamper Activated /
Tamper Activated
Starts chirping after 7 days, continues until the batteries are replaced or die. / Starts chirping after 7 days, continues
until the batteries are replaced or die / Starts chirping after 7 days, continues until the batteries are replaced or die /
Starts chirping after 7 days, continues until the batteries are replaced or die
NOTE: After enrolling and before mounting
permanently, conduct Go/No Go tests (see controller’s
instructions) to verify adequate signal strength. Adjust
the device location and orientation as necessary.
FC: NOTE: After enrolling and before mounting
permanently, conduct Go/No Go tests (see controller’s
instructions) to verify adequate signal strength. Adjust
the device location and orientation as necessary.
SP: NOTE: After enrolling and before mounting
permanently, conduct Go/No Go tests (see controller’s
instructions) to verify adequate signal strength. Adjust
the device location and orientation as necessary.
PA: NOTE: After enrolling and before mounting
permanently, conduct Go/No Go tests (see controller’s
instructions) to verify adequate signal strength. Adjust
the device location and orientation as necessary.
Mount / Mount /
Mount / Mount
Consult the Controller’s instructions to
program the Siren Services: Siren Chime
mode sound level; Tamper, and Temperature
Sensing.
FC: Consult the Controller’s instructions to
program the Siren Services: Siren Chime
mode sound level; Tamper, and Temperature
Sensing.
SP: Consult the Controller’s instructions to
program the Siren Services: Siren Chime
mode sound level; Tamper, and Temperature
Sensing.
PA: Consult the Controller’s instructions to
program the Siren Services: Siren Chime
mode sound level; Tamper, and Temperature
Sensing.
35dB
55dB
85dB
Factory default / Valeurs par défaut du
fabricant / Defecto de fábrica / Padrão
de fábrica
Life Safety / Life Safety / Life Safety /
Life Safety
Program /
Program / Program
Approval Listings:
Specifications:
FCC / IC
ETL Listed to UL985 / UL1023
cETL Listed to ULC-S545 &
ULC/ORD-C1023
RoHS
Range: 0’- 25’/ 0 – 7.6m; Selectable
RF Frequency: 2.4GHz
Batteries: 4 x 1.5V, AA Lithium; Honeywell 462
Tamper: Cover and Wall
Operating Temperature: 32° – 122° F / 0° – 50° C (Agency
Compliance 32° – 120° F / 0° – 49° C)
Relative Humidity: 95% max. (Agency Compliance - 93% max.),
non-condensing
Dimensions: 3.78” Diameter x 1.14” Thick / 96 mm Diameter
x 29mm Thick
Product must be tested at least once each year / Le fonctionnement du produit doit
être vérifié au moins une fois par année / El producto debe ser probado al menos
una vez al año / O produto deve ser testado pelo menos uma vez por ano
 2014 Honeywell International Inc. Honeywell and is a registered trademark of Honeywell International Inc.
All other trademarks are the properties of their respective owners. All rights reserved
www.honeywell.com/security
BATTERY CAUTION: Risk of fire,
explosion and burns. Do not recharge,
disassemble, heat above 212° F
(100° C) or incinerate. Dispose of
used batteries properly. Keep away
from children.
FC: BATTERY CAUTION: Risk of fire,
explosion and burns. Do not recharge,
disassemble, heat above 212° F
(100° C) or incinerate. Dispose of
used batteries promptly. Keep away
from children.
SP: BATTERY CAUTION: Risk of fire,
explosion and burns. Do not recharge,
disassemble, heat above 212° F
(100° C) or incinerate. Dispose of
used batteries promptly. Keep away
from children.
PA: BATTERY CAUTION: Risk of fire,
explosion and burns. Do not recharge,
disassemble, heat above 212° F
(100° C) or incinerate. Dispose of
used batteries promptly. Keep away
from children.
Replace Battery /
Replace Battery / Replace Battery
Support / Support / Support / Support
https://mywebtech.honeywell.com/
U.S. warranty / U.S. warranty / U.S. garantie / U.S. garantia
www.honeywell.com/security/hsc/resources/wa
MyWebTech
Warranty
FEDERAL COMMUNICATIONS COMMISSION & INDUSTRY CANADA STATEMENTS
The user shall not make any changes or modifications to the equipment unless authorized by the Installation
Instructions or User's Manual. Unauthorized changes or modifications could void the user's authority to operate the
equipment.
FCC / IC STATEMENT
This device complies with Part 15 of the FCC Rules, and RSS-210 of Industry Canada. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
Cet appareil est conforme à la partie 15 des règles de la FCC & de RSS-210 des Industries Canada. Son fonctionnement
est soumis aux conditions suivantes: (1) Cet appareil ne doit pas causer d’interférences nuisibles. (2) Cet appareil doit
accepter toute interférence reçue y compris les interférences causant une reception indésirable.
RF Exposure
Warning – The antenna(s) used for this device must be installed to provide a separation distance of at least 7.8 inches
(20 cm) from all persons and must not be co-located or operating in conjunction with any other antenna or
transmitter except in accordance with FCC multi-transmitter product procedures.
Mise en Garde
Exposition aux Frequences Radio: L'antenne (s) utilisée pour cet émetteur doit être installée à une distance de
séparation d'au moins 7,8 pouces (20 cm) de toutes les personnes.
REFER TO THE INSTALLATION INSTRUCTIONS FOR THE CONTROL WITH WHICH THIS DEVICE
IS USED, FOR DETAILS REGARDING LIMITATIONS OF THE ENTIRE ALARM SYSTEM.
2 Corporate Center Drive, Suite 100
P.O. Box 9040, Melville, NY 11747
Ê800-15964kŠ
800-15964 11/15 Rev B BETA2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Has XFA                         : No
Language                        : EN-US
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Modify Date                     : 2015:08:21 15:21:40-04:00
Create Date                     : 2015:08:05 12:48:10-07:00
Metadata Date                   : 2015:08:21 15:21:40-04:00
Creator Tool                    : Acrobat PDFMaker 11 for Word
Document ID                     : uuid:728fa3e2-9880-4381-a937-603d0cb24524
Instance ID                     : uuid:dcb74f7d-a653-4a54-a48e-87549a991bfb
Subject                         : 2
Format                          : application/pdf
Creator                         : E727032
Producer                        : Adobe PDF Library 11.0
Source Modified                 : D:20150805194759
Company                         : Honeywell
Page Layout                     : OneColumn
Page Count                      : 2
Author                          : E727032

EXIF Metadata provided by EXIF.tools