Ademco 8DLPLS8-USR3 GSM, WCDMA, LTE Module User Manual
Honeywell International Inc. GSM, WCDMA, LTE Module 800 08115
a href="https://usermanual.wiki/Ademco" itemprop="url">
Ademco >
Users Manual and Installation Revised
| Download: | |
| Mirror Download [FCC.gov] | |
| Document ID | 3343053 |
| Application ID | FWXeA5X1h/9wAzzfK8kOqQ== |
| Document Description | Users Manual and Installation Revised |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 205.37kB (2567160 bits) |
| Date Submitted | 2017-04-03 00:00:00 |
| Date Available | 2017-04-03 00:00:00 |
| Creation Date | 2017-01-24 12:15:25 |
| Producing Software | Adobe PDF Library 11.0 |
| Document Lastmod | 2017-03-13 18:18:45 |
| Document Title | 800-08115 |
| Document Creator | Acrobat PDFMaker 11 for Word |
| Document Author: | e652388 |
![Communicators Lyric-LTE Series Installation Instructions General Information The Lyric-LTE series Communication Modules allow the Lyric Controller to communicate with the Central Station via the cellular radio network. The Lyric-LTE series includes the following models: • LYRICLTE-V (US, Verizon network) • LYRICLTE-A (US, AT&T network) • LYRICLTE-C (Canada) FIRST TIME INSTALLATION NOTE: Before performing the first time installation of the communication module, make sure power (both AC and battery) is removed from the controller and follow the Installing the Module (First Time Installation) steps. Installing the Module (First Time Installation) 1. Install the provided FCC/IC label on the control’s case back. LYRICLTE-A & LYRICLTE-C: 800-22830 LYRICLTE-V: 800-22830-1 2. Remove bezel from right-hand side of control to expose the communication module slot. To remove the bezel, push upward then slide it out. 3. Insert the module into the slot. Push firmly to mate the edge connector. 4. Replace the bezel. 5. After all other connections are made, power up the controller. 6. Program and register the module during the controller’s initial association with its AlarmNet 360™ account. Refer to the controller’s Programming Guide for details. Typical FCC/IC Label Location Removing the Bezel Installing the communicator Module 7. Check the signal strength before permanently locating the Lyric Controller. See Checking Signal Strength section. 8. Test the communication paths. Master User: Security – Tools – [Master code] – Advanced – Comm. Test Installer: Security – Tools – [installer code] –Program – Comm. Diagnostcs - [V] – Test Communication Press Send Cellular Message. Wait for “Ack Received” message. Press Send Ethernet Message. Wait for “Ack Received” message. “Ack Received” indicates successful communication. If acknowledgement is not received, try one of the following: a. Use an external antenna (see Using an External Antenna section). b. Replace the radio with an alternate technology radio (ex., try 3G or CDMA). c. Set the communication path to Wi-Fi-only. Checking Signal Strength When choosing a suitable mounting location, check the communicator’s signal strength to ensure proper operation. For most installations, using the module’s internal antenna, mounting the Lyric controller as high as practical, and avoiding large metal components provides adequate signal strength. Use the Lyric Controller “Cellular Information” screen to display signal strength (in number of bars): Security – Tools – [installer code] – Program – Comm. Diagnostics – Cellular Information Compare the signal strength number of bars displayed to the Signal Strength Guide values at right to ensure adequate signal strength. If using AlarmNet 360, check that the display is minimum 2 bars. If necessary, relocate the Controller to obtain better signal strength (press Cellular Information again to refresh the reading). Signal Strength Guide Panel display signal strength: range of 1-5bars; should be minimum 2 bars AlarmNet 360 Display: Must be minimum 2 bars lit. If adequate signal strength cannot be achieved, an external antenna should be used. See Using an External Antenna section on the other side. PRELIMINARY](https://usermanual.wiki/Ademco/8DLPLS8-USR3/User-Guide-3343053-Page-1.png)