Ademco 8DLWLE200N2 WIRELESS-BGN 2X2 NETWORK MINI PCIE ADAPTER User Manual WLE200N2 DSv1 0 1

Download:
Mirror Download [FCC.gov]
Document ID	2290301
Application ID	q646q1hGdryCfzDDJaBADw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	30.18kB (377188 bits)
Date Submitted	2014-06-10 00:00:00
Date Available	2014-06-10 00:00:00
Creation Date	2014-02-26 11:19:16
Producing Software	Acrobat Distiller 8.0.0 (Windows)
Document Lastmod	2014-06-10 11:20:46
Document Title	Microsoft Word - WLE200N2_DSv1.0.1.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Ansem Lu

Half PCIe MINI CARD
WLE200N2
WIRELESS-BGN 2 x 2 NETWORK MINIPCIE ADAPTER
Superior Performance for Multimedia Networking
WLE200N2 is an 802.11n Single-Band wireless mini pci express Half
Mini Card based on Atheros AR9287 chipset. It supports 2T2R (2stream) function, which provides maximum data rate up to
300Mbps and improves the overall Wi-Fi coverage area.
Secure Wireless Connection
This Mini PCIe wireless card, WLE200N2, incorporated advanced
security encryption, such as WPA, and WPA2, to help prevent users’
devices from malicious attacks.
Features
•
Atheros HB97 reference design
•
IEEE 802.11n compliant and backward compatible with 802.11b/g
•
•
2.4GHz Single-band 2 x 2 MIMO spatial multiplexing technique
•
Supports up to 300Mbps physical data rates
•
Multi-Country Roaming Supported
•
•
2 x U.FL Antenna Connector
•
Enhanced wireless security: WEP, WPA, WPA2
Output Power up to 16dBm
Complaint with PCI-Express Mini Card 1.1 Standard
• Support Windows XP/ Vista, Win 7, Android by request
Technical Specifications
Chipset
AR9287
Host Interface
Operating
Voltage
Power
Consumption
Antenna
Connector
PCI–Express 1.1 Standard
DC 3.3 V±9%
Continue TX
Continue Rx
570mA
530mA
2 x U.FL Antenna Connector
802.11b: 16dBm ± 1.5dBm@11Mbps
802.11g: 11dBm ± 1.5dBm@54Mbps
802.11gn HT20: 12dBm ± 1.5dBm@MCS7
802.11gn HT40: 11dBm ± 1.5dBm@MCS7
802.11b: -88dBm ± 2dBm@11Mbps
Receive Sensitivity 802.11g: -70dBm ± 2dBm@54Mbps
(2R)
802.11gn HT20: -67dBm ± 2dBm@MCS7
802.11gn HT40: -65dBm ± 2dBm@MCS7
IEEE 802.11b :
11Mbps
5.5Mbps
2Mbps
1Mbps
54Mbps
48Mbps
36Mbps
24Mbps 18Mbps 12Mbps 9Mbps
IEEE 802.11g :
Fallback to 5.5Mbps, 2Mbps, 1Mbps
Standards
1Nss: 65Mbps @ 800GI, 72.2Mbps @ 400GI (Max.)
20MHZ
2Nss: 130Mbps @ 800GI, 144.4Mbps @ 400GI (Max.)
IEEE 802.11n :
1Nss: 135Mbps @ 800GI, 150Mbps @ 400GI (Max.)
40MHz
2Nss: 270Mbps @ 800GI, 300Mbps @ 400GI (Max.)
2.412GHz ~ 2.462GHz (US & Canada)
Frequency
IEEE 802.11b/g/n:
2.412GHz ~ 2.472GHz (Europe)
Range
2.412GHz ~ 2.484GHz (Japan)
Modulation
OFDM: BPSK, QPSK, 16 QAM, 64QAM
Techniques
DSSS: DBPSK, DQPSK, CCK
Environment
Operating: -20ºC to 70ºC
Specifications
Storage: -40ºC to 90ºC
Humidity
5% to 95% (non-condensing)
Output Power
(2T)
Weight
6Mbps
≤9g
Dimension
30mm x 26.8mm x 3.45mm
Ordering Informaion①
Model Code
WLE200N2 6A0000
Chipset
AR9287
Form Factor
Half Size
Configurations are subject to change without notice
Please contact Compex sales representatives for other available configurations
CARD INFORMATIONS
802.11 b/g/n PCIe mini card
automatically
DIMENSIONS DRAWING
Compex Systems Pte Ltd
135 Joo Seng Road, PM Industrial Building #08-01,
Singapore 368363
Tel: (65) 6286 2086
Fax: (65) 6280-9947
Email: sales@compex.com.sg
Compex (Suzhou) Co. Ltd
No. 12, ChuangTou Industrial Square, LouFeng North, Suzhou
Industrial Park, Suzhou, Jiangsu Province, China 21122
Tel: (86)-512-62950031
Fax: (86)-512-62950032
Copyright © 2010 Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of COMPEX Inc.
Atheros and other trademarks are properties of their respective owners.
While every effort is made to ensure the information accurate, Compex does not accept liability for any errors or mistakes that may
arise. All specification is subject to change without notice. DS: V1.0.1 Alex 120823
For more information, visit www.compex.com.sg
IC Radiation Exposure Statement for Canada
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil
ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna
of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To
reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent is otropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour
l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain
de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité
nécessaire à l'établissement d'une communication satisfaisante.
User manuals for transmitters equipped with detachable antennas shall also contain the
following notice in a conspicuous location:
This radio transmitter (identify the device by certification number, or model number if
Category II) has been approved by Industry Canada to operate with the antenna types listed
below with the maximum permissible gain and required antenna impedance for each antenna
type indicated. Antenna types not included in this list, having a gain greater than the maximum
gain indicated for that type, are strictly prohibited for use with this device.
Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son
numéro de modèle s'il fait partie du matériel de catégorie I) a été approuvé par Industrie
Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain
admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne
non inclus dans cette liste,ou dont le gain est supérieur au gain maximal indiqué, sont
strictement interdits pour l'exploitation de l'émetteur.
Frequency Band
Type
Model No.
(GHz)
Antenna
Gain (dBi)
2.4 ~ 2.5
Dual Band Omni Directional Antenna
SAA04-22008A
4.5
2.4 ~ 2.5
Omni Directional Antenna
WD12020124G
2.0
The antenna(s) used for this transmitter must be installed to provide a separation distance of
at least 20cm from all persons.
If the module installed in the host device. The antenna(s) used for this host device must be
installed to provide a separation distance of at least 20cm from all persons.
The host device shall be properly labelled to identify the modules within the host device.
The Industry Canada certification label of a module shall be clearly visible at all times when
installed in the host device, otherwise the host device must be labelled to display the Industry
Canada certification number of the module, preceded by the words “Contains transmitter
module”, or the word “Contains”, or similar wording expressing the same meaning, as follows:
Contains transmitter module IC: 7849A-WLE200N2
Compliance Information
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
This device must accept any interference received, including interference that may cause undesired
operation. Product that is a radio transmitter is labeled with FCC ID.
FCC Caution:
(1) Exposure to Radio Frequency Radiation. This equipment must be installed and operated in
accordance with provided instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not be collocated or
operating in conjunction with any other antenna or transmitter. End-users and installers must be
provided with antenna installation instructions and transmitter operating conditions for satisfying RF
exposure compliance.
(2) Any changes or modifications not expressly approved by the grantee of this device could void the
user's authority to operate the equipment.
(3) This Transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
(4) Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user authority to operate the equipment.
RF exposure warning
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
The equipment must not be co-located or operating in conjunction with any other antenna or
transmitter.
IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization is no longer
considered valid and the FCC ID cannot be used on the final product. In these circumstances, the
OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and
obtaining a separate FCC authorization.
The antenna gain which being use as below:
(1) The modules FCC ID is not visible when installed in the host, or
(2) If the host is marketed so that end users do not have straight forward commonly used methods for
access to remove the module so that the FCC ID of the module is visible; then an additional permanent
OEM integration instructions：
This device is intended only for OEM integrators under the following conditions：
The antenna must be installed such that 20 cm is maintained between the antenna and users，and
the transmitter module may not be co-located with any other transmit or antenna. The module shall be
only used with the integral antenna(s) that has been originally tested and certified with this module.
As long as 3 conditions above are met，further transmitter test will not be required.
However，the OEM integrator is still responsible for testing their end-product for any additional
compliance requirement with this module installed(for example，digital device emission，PC peripheral
requirements，etc.)
OEM integration instructions：
In the event that these conditions cannot be met (for example certain laptop configuration or
co-location with another transmitter), then the FCC authorization for this module in combination with
the host equipment is no longer considered valid and the FCC ID of the module cannot be used on the
final product. In these and circumstance，the OEM integrator will be responsible for re-evaluating. The
end product (including the transmitter) and obtaining a separate FCC authorization
End product labeling：
This transmitter module is authorization only for use in device where the antenna may be installed
such that 20 cm may be maintained between the antenna and users. The final end product must be
labeled in a visible area with the following：
“Contains Transmitter Module FCC ID: CF S8DLWLE200N2 or Contains FCC ID: CF
S8DLWLE200N2”
Information that must be placed in the end user manual：
The OEM integrator has to be aware not to provide information to the end user regarding how to install
or remove this RF module in the user’s manual of the end product which integrates this module. The
end user manual shall include all required regulatory information/warning as show in this manual.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Ansem Lu
Create Date                     : 2014:02:26 11:19:16+08:00
Modify Date                     : 2014:06:10 11:20:46+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : Ansem Lu
Title                           : Microsoft Word - WLE200N2_DSv1.0.1.doc
Creator Tool                    : PScript5.dll Version 5.2
Metadata Date                   : 2014:06:10 11:20:46+08:00
Producer                        : Acrobat Distiller 8.0.0 (Windows)
Document ID                     : uuid:6520019f-7caa-4341-b4be-3f47e21051e4
Instance ID                     : uuid:006718d8-517e-4dfb-a510-0ecdc1bf6a31
Page Count                      : 7

EXIF Metadata provided by EXIF.tools