Adura Technologies SDR10PA Wireless Lighting Control for commerical and industrial buildings User Manual p1 antenna

Adura Technologies, Inc. Wireless Lighting Control for commerical and industrial buildings p1 antenna

Contents

User Manual Antenna Instructions

external antennaINSTALLATIONINSTRUCTION MANUALSeveral ADURA™ devices have two antenna options to allow for a robust RF connection. For each ADURA product, the primary antenna is internal to the enclosure and is used by default. If the installation environment results in a poor RF link quality for the default antenna, a second external antenna can be used to improve RF link performance. For this option, the separate external antenna can be connected to the provided MMCX antenna jack on the ADURA device. Only ADURA-provided or authorized external antennas may be used with ADURA products. All antennas must be installed by trained professionals. The antenna type must be one of the following: •1/2 wave whip antenna with a maximum gain of +2dBi •1/4 wave dome antenna with a maximum gain of +0dBiInstallation Instructions:1. Remove power to the device(s).2. Connect the external antenna to the MMCX antenna jack on the device(s).3. ADURA-provided antennas have a 3’ cable to allow mounting of the antenna element outside of the light xture or other enclosure. Some ADURA antenna models will mount directly in the 1/2” knockout hole for convenience.4. Once the antenna is securely mounted, power on the connected device(s).5. Using the ADURA commissioning tools, congure the appropriate device(s) to use the additional external antenna. See commissioning documentation for more information.ADURA TECHNOLOGIES™San Francisco, CA 94105Tel: 415.227.0868 • Toll Free 1-888-828-8281CAUTION• Disconnect power before installation or service.• All installation and maintenance work must be performed by qualied personnel.• The antenna must be installed in accordance with state, local and national electrical codes and requirements.TM
Ordering Information:XA Instructions 08.09Catalog Number DescriptionADURA TECHNOLOGIES™San Francisco, CA 94105Tel: 415.227.0868 • Toll Free 1-888-828-8281w w w . a d u r a t e c h . c o mTMThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference when the equipment is operated in a commercial environment. The equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communica-tions. Operation of the equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense.Class A Digital DevicesWARRANTY INFORMATIONAdura Technologies™ warranties its products to be free of defects for a period of ve years. Adura Technologies will, at its option, repair or replace any product that is defective in materials or manufacture that is returned to ADURA within the warranty period. This warranty is void if this product has been installed improperly or in an improper environment, overloaded, misused, or altered in any manner, or not installed in accordance with any labels or instructions. Adura Technologies is not liable for incidental, indirect, special, or consequential damages, including without limitation, damage to, or loss of use of property, revenue or prot. This warranty does not cover the cost of installation, removal or reinstallation. To comply with RF exposure compliance requirements, for mobile congurations, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter.Optional external antenna XASpecications:Antenna Type:Radio Frequency: 2405 MHz - 2480 MHz1/2 wave whip antenna with a maximum gain of +2dBi1/2 wave dome antenna with a maximum gain of +0dBiConnector Type:MMCX Plug~3' coax cableAntennaRubber Knockout Plug for mountingADURA™ Light ControllerDiagram #1 - Light ControllerDiagram #2 - Sensor InterfaceMMCX plug (antenna)MMCX jack (ADURA device)SI-2C

Navigation menu