Advance Bright BTS700 BLUETOOTH PORTABLE SPEAKER User Manual BPS700 IM OP

Download:
Mirror Download [FCC.gov]
Document ID	2048214
Application ID	/+yJ4kvT0JuFM/D6I/zzvQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.89kB (298612 bits)
Date Submitted	2013-08-20 00:00:00
Date Available	2013-08-20 00:00:00
Creation Date	2013-08-16 16:24:19
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2013-08-16 16:24:19
Document Title	BPS700 IM OP
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

BPS700 IM OP.pdf
9/11/2012
BTS700
11:53:16
Note: Approximately 1-2 hours required
for full charge. Battery will last up to 6
hours when connected wirelessly and
up to 10 hours when connected
through Line-in.
Changing Connected Bluetooth Device
1. Disable the Bluetooth function of your
Bluetooth device.
2. The Bluetooth Speaker can now be
USB Compatible
Wall charger
(not included)
device.
3. Following the instructions in the “Play
Audio from Bluetooth Device” section
or
Computer
(not included)
Bluetooth Portable Speaker
Package Contents
- BTS700 Portable Bluetooth Speaker
- Micro USB to USB and
3.5 mm splitter cable
- User Manual
Play Audio from Non-Bluetooth Device
1. Switch the Bluetooth Speaker to the
AUX IN mode. The status indicator turns
solid blue.
2. Connect the Bluetooth Speaker and
your non-Bluetooth audio device with
the included Micro USB to USB and 3.5
mm splitter cable. The speaker is ready
to play music.
LED
Indicators
Micro USB
Power Input /
Line-in
CM
Slide switch
AUX IN mode;
BT mode]
MY
CY
CMY
Front View
Back View
LED Indicators
AUX/
BT
Indicator
RED
GREEN
Flashing
BLUE
BLUE
Status
Charging
Fully Charged
Pairing Mode
Connected /
AUX IN Mode
How to Charge BTS700
1. Plug micro USB Tip from the included
cable to the micro USB slot from
BTS700.
2. Plug USB Tip from the included cable to
USB compatible wall charger with 0.5A
current output(DC 5V, 500mA).
3. When the BTS700 is fully charged,
disconnect the USB Cable.
Audio is not coming out from the
Bluetooth Speaker after Bluetooth device
successfully paired.
t
Make sure the Bluetooth device volume
is set to a comfortable listening level.
Audio is not coming out from the
Bluetooth Speaker after the
non-Bluetooth device connected with
the Micro USB to USB and 3.5 mm splitter
cable.
t
Make sure the Micro USB to USB and 3.5
the Bluetooth Speaker and
non-Bluetooth device.
t
Make sure the non-Bluetooth device is
set to a comfortable listening level.
t
Audio is coming out with abnormal
noise and sound quality. Try to change
up the battery of Bluetooth speaker.
Overview
Play Audio from Bluetooth Device
1. Switch the Bluetooth Speaker to the
BT mode. The speaker is discoverable
and ready for pairing. The status
indicator blinds blue.
Example: Android 4.03 Ice Cream
Sandwich Smartphone
Press Settings > Bluetooth ON > Scan >
Ye!!-BTS > Enter PIN: 1234 > Settings >
Check the Media audio box
available and supports Bluetooth
t
Make sure the Bluetooth Speaker is
within range of your Bluetooth device.
2. On your Bluetooth device, turn on
Bluetooth and scan for devices in its
Bluetooth menu.
3. When the “Ye!!-BTS” appears on the
device list of your Bluetooth device,
select “Ye!!-BTS”. (If a pass code is
requested, enter 1234.) The status
indicator turns solid blue after pairing
is established. The speaker is ready to
play music.
Example: iPad / iPhone / iPod Touch
Press Settings > General > Bluetooth >
Bluetooth ON > Ye!!-BTS > Enter PIN:
1234 > Pair
Model No.
Output Power
Power Capacity
Input Voltage
Charge Time
Playback Time
Reconnecting Bluetooth Device
Keep in mind that the Bluetooth Speaker
Bluetooth feature on your Bluetooth
device, the Bluetooth Speaker will
disconnect from your device. To
reconnect, simply follow the instruction
in the “Play Audio from Bluetooth Device”
section.
BTS700 Ye!!-BTS
3W
1,000 mAh
DC 5V / 1A
1 – 2 hours
Up to 6 hours
on Bluetooth
Up to 10 hours
on Line-in
Operating Distance up to 33 feet
(10 metres)
Bluetooth Version Bluetooth 3.0
with EDR
Dimensions
61 x 61 x 54 mm
Net Weight
133 g
Troubleshooting
No connection between Bluetooth
Speaker and your Bluetooth device.
t
Make sure the Bluetooth Speaker is fully
charged
t
Make sure the BT mode is switched on.
t
Make sure your Bluetooth device is
Precautions
1. The radio waves emitted by the
Bluetooth Speaker and Bluetooth
electronics including medical devices.
2. Keep the unit in a cool, dry place.
For more information, please visit
www.yelltowin.com
Designed by Ye!! in Hong Kong
Assembled in China
811-BTS700-00-W
FCC NOTE：
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE
TO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE COULD VOID AND
CHANGE ANNTENA WHICH THE MANUFACTURER PROVIDES.
IT IS THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a resi dential installation.
This equipment generates, uses and can radiate radio frequenc y energy and, if not
installed and used in accordance with the in structions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular insta llation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to corr ect the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experien ced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, this equipment should be
installed and operated with a minimum distance of 20cm between the radiator and your
body.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
GTS PDFX Conformance            : PDF/X-1a:2001
Create Date                     : 2013:08:16 16:24:19+08:00
Modify Date                     : 2013:08:16 16:24:19+08:00
Metadata Date                   : 2013:08:16 16:23:56+08:00
Creator Tool                    : PScript5.dll Version 5.2
Thumbnail Width                 : 256
Thumbnail Height                : 164
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 19169 bytes, use -b option to extract)
Document ID                     : uuid:536167314D06E311A7139EFF8067E95A
Instance ID                     : uuid:304704b1-58f9-47a6-8fa9-30dbac2936cc
Derived From Instance ID        : uuid:82a5904a-4702-4aa7-9664-63cb1cdae990
Derived From Document ID        : xmp.did:4991B6FA202AE21197CAA7821B9C02C0
Derived From Version ID         : 1
Derived From Rendition Class    : proof:pdf
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : True
Max Page Size W                 : 240.758775
Max Page Size H                 : 156.096243
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, MyriadPro-Regular, MyriadPro-Bold, AdobeMingStd-Light
Font Family                     : Arial, Myriad Pro, Myriad Pro, AdobeMingStd Light
Font Face                       : Regular, Regular, Bold, Light
Font Type                       : Open Type, Open Type, Open Type, Unknown
Font Version                    : Version 3.00, Version 2.007;PS 002.000;Core 1.0.38;makeotf.lib1.7.9032, Version 2.037;PS 2.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 3.12
Font Composite                  : False, False, False, False
Font File Name                  : ARIAL.TTF, MyriadPro-Regular.otf, MyriadPro-Bold.otf, simsun.ttc
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Format                          : application/postscript
Title                           : BPS700 IM OP
Creator                         : Administrator
GTS PDFX Version                : PDF/X-1:2001
Page Count                      : 2
Author                          : Administrator

EXIF Metadata provided by EXIF.tools