Advance Security T62 Remote Control User Manual IM QR SL 3S rev A

Advance Security Inc Remote Control IM QR SL 3S rev A

Users Manual

2 Ignition controlled door locks & unlocks Ignition controlled door locks only Ignition controlled door unlocks only Without ignition controlled door locks & unlocks 3 0.8-second Door lock pulses. 3.5-second Door lock pulse. Double pulse unlock Comfort feature 4 3rd Channel Trunk Pulsed, 3rd Channel Trunk Momentary 5 + Button = Silent Arm/Disarm Button = channel 4 AUX 1 6 + Gray Wire = Trunk (Channel 3) OutputGray Wire = Two Step Door Unlock Output 7. +Horn chirp 20 mS Horn chirp 50 mS Horn chirp 30 mS Horn chirp 10 mS SL-3S QUICK START INSTALLATION MANUALIf you are not proficient in the installation of this product or would like a full version of the installation manual, Please visit our web site @ www.silencer.com FOR PROFESSIONAL INSTALLATION ONLY! ALARM FEATURE “A” PROGRAMMING: 1. Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position.2. Push the Valet switch 3 times and hold in on the 3rdpush. When a long chirp is heard,release the valet switch. You are now in the Alarm feature A programming mode.3. Press the transmitter button corresponding to the feature you want to program.4. Press the transmitter button again to change the feature. Simply keep pressing thetransmitter button again until the module advances to your desired setting.Press Transmitter Button One Chirp / LED one pulse Factory Default Setting Two Chirps /LED two pulses Three Chirps /LED three pulses Four Chirps /LED four pulses 1 Active arming Passive arming without passive door locking Passive arming with passive door locking. 2 Automatic Rearm off Automatic Rearm on 3 45 seconds delay Door Ajar error chirp. Instant Door Ajar error chirp 4 Siren Confirmation chirp on only All Confirmation chirps On Horn Confirmation chirp on only All Confirmation chirps off 5 + White wire= Dome Light Output White wire= 4th Channel pulsed White =4th channel Momentary White =4th channel Latched 6 + Lock/Arm & Unlock/Disarm Confirmation Chirps Lock/Arm Confirmation Chirp Only 7. + ALARM with Keyless Entry Keyless Entry ONLY 8. + Car Jacking feature Off Car Jacking feature On Exit: Turn Ignition to 'ON' position, or leave it for 15 seconds. 3 long chirps will confirm exit. ALARM FEATURE “B” PROGRAMMING: 1 Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position. 2 Push the Valet switch 4 times and hold in on the 4thpush. When a long chirp isheard, release the valet switch. You are now in the Alarm feature ʻBʼ programming mode. 3 Press the transmitter button corresponding to the feature you want to program. Press Transmitter Button One Chirp / LED one pulse Factory Default Setting Two Chirps / LED two pulsesThree Chirps / LED three pulses Four Chirps / LED four pulses 1 Pathway illumination feature “off” Parking light turns “on” for 30- second upon an unlock signal Parking light turns “on” for 30- second unlock signal & 10- lock ALARM FEATURE “C” PROGRAMMING: 1. Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position.2. Push the Valet switch 5 times and hold on the 5thpush until a long chirp is heard thenrelease the valet switch. You are now in the Alarm feature ‘C’ programming mode.3. Press and hold the transmitter button for two seconds to enter shock sensor programmode. Press Transmitter Button One Chirp / LED one pulse Factory Default Setting Two Chirps / LED two pulse 1 Shock Sensor Program Mode 2. ADS DBI protocol Fortin DBI Protocol 3 + No Function DBI start output on channel 4 ADJUST AND TEST THE SENSITIVITY LEVEL OF THE SHOCK SENSORTurn the Ignition switch ‘ON/OFF’ 3 TIMES and stay in OFF position. Push the Valet switch 5 times holding in on the 5th push. until a long chirp will be heard. Release the valet switch. You are now in the feature ‘Shock Sensor’ programming mode. Press and hold button for 2 seconds. One long siren chirp will indicate the unit is ready to accept adjustments of the shock sensor. Press button on the transmitter once. This will decrease sensitivity level by one. Each time the button is pushed and a decrease is made the siren/horn chirp will respond with [1] chirp. Two chirps indicate the minimum sensitivity. Warn away & full trigger will be deleted when minimum sensitivity is selected. Shock sensor OFF. Press button on the transmitter once. This will increase sensitivity level by one. Each time an increase is made the siren/horn chirp will respond with [1] chirp. Two chirps indicate the maximum sensitivity. Hit the bumper or strong metal part of the vehicle to test the threshold level of the sensor. a). Activate the warn-away (first stage the shock sensor), the siren will emit a short chirp. b). Activate the full alarm (second stage the shock sensor), the siren will emit a long chirp. When you are satisfied with the setting, press the button to lock in the adjustment. One long siren chirp will indicate the unit has locked in the adjustment. Note: If 30 seconds of inactivity expires or you turn ON the ignition during of above steps, the unit will exit the program mode. Three long chirps will confirm exit. ButtonIM-QR-SL-3S rev AThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Quick StartOPERATIONS MANUAL Please register your product at www.silencer.com/manual .CHANGING THE BATTERY IN YOUR TRANSMITTERSTRANSMITTER OPERATION Transmitter ButtonSystem FunctionRemark Button Lock door / ARM ARM (OPTIONAL) –Button Arm and Delete Optional Sensor Press twice. (OPTIONAL) Button Car Locator While System Armed. Button for 3 seconds Panic function Press 3 seconds Button Unlock Door / DISARM –ButtonTwo Steps Door Unlock & Disarm System Press twice within 3 seconds. (optional installation and programming required) Button

Navigation menu