Advance Security TR13 Car Alarm Transceiver User Manual
Advance Security Inc Car Alarm Transceiver MODEL 6876
UserManual.wiki
>
a href="https://usermanual.wiki/Advance-Security" itemprop="url">
Advance Security
>
TR13 User Manual
>
Users Manual ⚡ Mobile Version
Users Manual
Download:
Mirror Download [FCC.gov]
Document ID
554701
Application ID
QFxjrB32565LrKCWychGQg==
Document Description
Users Manual
Short Term Confidential
No
Permanent Confidential
No
Supercede
No
Document Type
User Manual
Display Format
Adobe Acrobat PDF - pdf
Filesize
72.71kB (908829 bits)
Date Submitted
2005-06-22 00:00:00
Date Available
2005-06-22 00:00:00
Creation Date
2005-06-15 16:08:27
Producing Software
Acrobat Distiller 5.0 (Windows)
Document Lastmod
2005-06-15 16:15:38
Document Title
MODEL 6876
Document Creator
Acrobat PDFMaker 5.0 for Word
Document Author:
CINDY
FCC ID Filing:
H5OTR13
Navigation menu
Upload a User Manual
Versions of this User Manual:
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![MAY/18/2005 DELUXE 200 REMOTE ENGINE STARTER WITH KEYLESS ENTRY SYSTEM INSTALLATION MANUAL INTRODUCTION INSTALLER WARNINGS This Remote Starter with Alarm System is designed to be installed on fuel injected vehicles ONLY. ! For automatic transmission vehicle, this system must be installed and wired through a safety switch it will not start in any forward or reverse gear. ! Some automatic transmission vehicle [mainly older GM vehicles with a purple starter wire] have a mechanical-type park safety switch instead of electrical safety switch. The mechanical type does not interrupt the starter circuit when the transmission is any gear and does not offer the 100% level of safety required for remote starting purposes. Therefore, our system should never be installed on any vehicle that uses a mechanical type park safety switch. ! For automatic transmission vehicle, once you install this system, you must verify that the vehicle will not start any forward or reverse gear. Regardless of the type of vehicle. ! Read operation manual for operating and programming routine. ! Do not install any component near the brake, gas pedal or steering linkage. ! Some vehicles have a factory installed transponder immobilizer system that can severely complicate the installation. There is possibility that this system can not be installed on some immobilizer equipped vehicles. ! Most vehicles have an SRS air bag system. Use extreme care and do not probe any wires of the SRS system. ! Disconnect the car battery before connecting work on the vehicle. ! Check behind panels before drilling any holes. Ensure that no wiring harness or other components are located behind the panels that would otherwise be damaged. ! Use conventional crimp lock, bullet on any wiring. Poor wiring, i.e. taped joints will possibly introduce unreliability into the alarm system and may result in false alarms or incorrect operation. ! Install wiring neatly under carpets or behind trim to prevent possible damage to wires. ! For the wire operates the current more than 10A. We suggest soldering all connection point. Do not use crimp lock type connectors or wire nuts. INSTALLATION DIAGRAM #H4. 9 PIN WIRE CONNECTION: DELUXE 200-LCD 1](https://usermanual.wiki/Advance-Security/TR13/User-Guide-554701-Page-1.png)