Advance Security TR23 Remote Control User Manual MODEL 6876

Advance Security Inc Remote Control MODEL 6876

Users Manual

MODEL XRO-9100 REMOTE ENGINE STARTER WITH ALARM SYSTEM OWNER’S MANUAL 1
REMOTE TRANSCEIVER (TX) A. OLED DISPLAY Name of Transmitter Timer Door Lock Door Unlock In – Range Indicator Alarm Status Temperature Bypass Shock Sensor Battery Level Engine Running Melody Mode Count Down Timer Parking Timer Vibration Mode Alert Alarm Timer Start B. CHARGE THE BATTERY Power by built-in 3.7V lithium polymer battery, if the OLED screen display low battery or is flash, charge your remote transceiver. While the battery of the Remote Transceiver is under the battery charging, you can push the ” ” button to check charging condition. While the battery of the Remote Transceiver is under charging. Push the button; the screen will display Battery charging. C. MAIN PAGE: 1. Press the button, the screen will display main page. 2. While the icon flashing on the OLED screen, press the button, the OLED screen will display the detail of the flash icon, the display sequence of flash icon as follows: TRIGGERED / ENGINE RUNNING / COUNT DOWN TIMER / TIMER START / ALART TIMER condition. 2
While the TRIGGERED icon flash. Push the button to display triggered area. While the icon flash Push the button While the icon flash Push the button, the count down timer will display. Press the button 2to set off the count down time missing graphic or Or While the icon flash Push the button, the OLED screen will display individually i.e. daily start timer, timer start or temperature start, depend on which you selected. While the icon flash Push the button, the alert alarm time will display. Press the button 2 to set off the alert alarm timer D. SELECT THE TRANSCEIVER’S BUTTON CONFIGURATION: 1. Spin up the Switch to select the transceiver button configuration you need and the OLED screen will display the transceiver button configuration you select. 2. Within 5 seconds press the button 1, 2, 3 or 4 to remote control “button configuration” you selected. Note: If 5 seconds of inactivity expired, or push the button, the transceiver button configuration mode will exit. 3
Spin up the switch to the page 1 Spin up the switch to the page 2 Spin up the switch to the page 3 Spin up the switch to the page 4 Spin up the switch to the page 5 Spin up the switch resume to main page. E. SELECT THE TRANSCEIVER FEATURES: 1. Spin down the Switch to select the transceiver feature you need and the OLED screen will display the features you select. 2. Press the button 1, 2, 3 or 4 once within 3 seconds after finished selection and the OLED screen will change the display alternatively. Note: If 5 seconds of inactivity expire, or push the button, the transceiver features program mode will exit. Spin down the switch to the page 1 Spin down the switch to the page 2 Spin down the switch to the page 3 Spin down the switch to the page 4 Spin down the switch to the page 5 Spin down the switch to the page 6 Spin down the switch resume to main page. E- P1- 1. “BUTTON BI” SETTING: Example: Set the “Button Bi Disable”. It has a short “bi” sound while pressing the b utton of the remote transceiver Spin down the switch to the page 1 Press the button 1 and it will display previously setting Press the button 2 to change the setting Press the button and the setting is done. 4
E- P1- 2. “BUTTON LOCK” SETTING: Example: Set the “Button Lock Enable”. Spin down the switch to the page 1 Press the button 2 and it will display previously setting Press the button 1 to change the setting Press the button and the setting is done. D- P1- 3. “MELODY / VIBRATION MODE” SETTING: Example: set the Vibration mode. Spin down the switch to the page 1 Press the button 3 and it will display previously setting Press the button 2 to change the setting Press the button and the setting is done also the icon will display on the OLED screen E- P1- 4. “DEMO MODE”: Spin down the switch to the page 1 Press the button 4 to start Demo movie Demo movie playing Press the any Button to exit. E- P2- 1. “POWER SAVE” SETTING: Example set the “Power Save Enable”. While the power save mode, the LCD remote transceiver uses “0” current to save the battery power. Spin down the switch to the page 2 Press the button 1 and it will display previously setting. Press the button 1 to change the setting. Press the button and the setting is done. E- P2- 2. “PARKING METER” SETTING: Example set the “Parking Meter 30 min.. Note: When “parking meter” trigger presses any button to stop the beeper. Spin down the switch to the page 2 Press the button 2 Press the button 1 three times to set the parking timer to 30 minutes. Press the button to start the parking meter and the icon will 5
flash on the main page. D - P2- 3. “PARKING AREA” SETTING: Example set the “Parking Area.” to “B120 Spin down the switch to the page 2 Press the button 3, it will display previously parking area Press the button 2 to clear the parking area, and the “-” flashes for setting. Spin up the switch to setting the “B” Press the button 1 and the “-” flashes for setting. Spin down the switch to set the “1” Press the button 1 and the “-” flashes for setting. Spin down the switch to set the “2”. Press the button 1 and the “-” flashes for setting. Spin down the switch to set the “0”. Press the button 3 and the setting is done. D- P2- 4. “LIGHTING FOR OLED” TIMER SETTING: Example: set the LCD display from 2 seconds to 3 seconds. Spin down the switch to the page 2 Press the button 4 and it will display previously setting Press the button 2 to change the setting Press the button and the setting is done. D- P3- 1. “TIMER” SETTING: E xample set the timer to 08:20P 6
Press the button 2 to set the ”hours” digit to “08” Press the button 1 and the ”minute” digit flashes for adjusting. Spin down the switch to the page 3 Press the button 1 and the ”hour” digit flashes for adjusting. Press the button 2 to set the “minute” digit to “20” Press the button 1 and the ”A” digit flashes for adjusting. Press the button 2 to set the “P” Press the button 3 and the setting is done. D- P3- 2. “ALERT ALARM TIMER” SETTING: Example set alert alarm timer to 06:30A Note: When alert alarm timer trigger press any button to stop the beeper. Spin down the switch to the page 3 Press the button 2 and the ”hour” digit flashes for adjusting. Press the button 2 to set the ”hour” digit to “06”. Press the button 1 and the ”minute” digit flashes for adjusting. Press the button 2 to set the ”minute” digit to “30”. Press the button 3 to set the alert alarm timer and the icon will flash on the main page. Push the button While the icon is flashing or When alert alarm timer trigger, the screen will display alert alarm timer Press the button 2 to set off the alert alarm timer or press any button to stop alarm while alert alarm timer trigger C- P3- 3. “COUNT DOWN TIMER” SETTING: Example set the count down timer to 2:30 Note: When count down timer is trigger, press any button to stop the beeper. Spin down the switch to the page 3 Press the button 3 and the ”hour” digit flashes for adjusting. Press the button 2 to set the ”hour” digit to “02” Press the button 1 and the ”minute” digit flashes for adjusting. 7
Press the button 2 to set the ”minute” digit to “30”. Press the button 3 to start the count down timer and the icon will flash on the main page. While the icon is flashing push the ” ” button to display the count down timer Press the button 2 to set off the count down time. D- P4- 1. “NAME OF TX ” SETTING: Example Set Name of Transceiver 1 to MIKE Spin down the switch to the page 4 Press the button1 and the “-” flashes for setting. Spin down the switch to set the “M”. Press the button 1 and the “-” flashes for setting. Spin up the ” switch to set the ”I”. Press the button 1 and the “-” flashes for setting. Spin down the switch to set the ”K”. Press the button 1and the “-” flashes for setting. Spin up the switch to set the ”E”. Press the button 3and the setting is done. D- P5- 1. “NA ME OF CHANNEL ” SETTING: Example Set Name of channel 4 to GARAGE DOOR Spin down the switch to the page 5 Press the button 1 and the “-” flashes for setting. Spin up the switch to set the ”G”. Press the button 1 and the “-” flashes for setting. Spin down the switch to setting the ”A”. Following the above step to setting Alphabetical to RAGE DOO Press the button 1 and the “-” flashes for setting. Spin down the switch to set the ”R” Press the button 3 and the setting is done. 8
D- P6- 1. LANGUAGE SETTING: Example set the Language to English Spin down the switch to the page 6 Press the button 1 to set the Language to ”ENGLISH”. Press the button and the setting is done. D- P6- 4. SET TO DEFAULTS: Spin down the switch to the page 6 Press the button 4. Press the button 1 & 2 at same time to set the defaults. OPERATION: ARMING DISARMING VALET MODE 9
CAR LOCATOR PANIC FUNCTION TRIGGER THE SYSTEM SINGLE TRIGGER MULTI TRIGGER ANTI CAR- JACKING FORM POSSE PORT DRIVER PAGING TRUNK RELEASE OUT OF RANGE TEMPERATURE CHECK 10
MULTI- VEHICLE SECURITY OPREATION TURBO TIMER MODE REMOTE START TIMER START TEMPERATURE START DAILY TIMER START TURN OFF THE REMOTE START 11
Model XRO-9100 SELECTABLE FEATURES The selectable features can be set manually as explained below, Factory default settings are indicated by bold text. Note : The method of manual override can either be selected to operate from the valet switch or operate as custom code. Be certain to place a check mark indicating the method used in the box located on the last page of the owner’s manual. NOTE: Keyless Entry Models with no horn output will Flash the Parking Lights instead of chirp where chirp is indicated. RF Programmable Feature Bank 1 Is For Transmitter Programming See Transmitter Programming Guide. RF Programmable Features Bank 2 Is Alarm Selectable Features: Feature Selection 1 Chirp 2 Chirps 3 Chirps 4 Chirps 5 Chirps 6 Chirps 1st Door L/UL 1 Sec. 3.5 Sec. 1 Sec L, Dbl.U/L Dbl L, 1 Sec UL Dbl L, Dbl UL 1 Sl/350ms UL 2nd Accy Lock Auto Lock On Auto Lock Off 3rd Accy. Ul Auto UL Dr. Auto UL ALL Auto UL Off 4th Headlights On Arm On Disarm On Both Off 5th Passive Locks Passive Active 6th Pass/Act Arm Passive Arm Actime Arm 7th Siren/Horn Siren/Horn Siren Only Horn Only 8th Horn Chirp 10 ms 16 ms 30 ms 40 ms 50 ms 9th O/R Method Custom Code Valet 10th 2 Step U/L On Arm Off 11th Chp Del Tx On Arm Off 12th Volts/HdWire Not Available 13th Trigger Circuits Not Available 14th L/UL Poll Not Available To exit program mode, turn ignition off, or press and release valet switch. RF Programmable Features Bank 3 Is Remote Start Selectable Features : Feature Selection 1 Chirp 2 Chirps 3 Chirps 4 Chirps 5 Chirps 6 Chirps 1st Defrost Output Pulsed 10 Mins 2nd RF Start Chirp Off On 3rd Run Time 5 Mins 10 Mins 15 Mins 20 Mins 4th Parking Lights On Steady Flashing 5th Input Check Voltage Tach DBI Tach 6th Voltage Level >0.5V B4 Start <0.5V B4 Start 7th Ing. 2 Select Off During Crank On During Crank Same Aas Accy. 12
8th Ign. 3 Select Off During Crank On During Crank Same Aas Accy. 9th Diagnostics Off On 10th Crank Time 0.8 Sec 1.0 Sec 1.5 Sec 2.0 Sec 11th Gas / Diesel Gas Diesel 10 Diesel 15 Diesel 20 DBI 12th Transponder O/P While R/S On During Start Until Ign. Off 13th Temp Start Off On 14th Crank Averaging Averaging Preset Time (NOTE:When Averaging, the engine must be started 4 times with the key to be effective) 15th R/S Shock Shunt Until Clear Shunt R/S Cycle Shunt From TX 16th Turbo Select Off 3 Mins 5 Mins 10 Mins 17th Black /Blue (Aux O/P) Single Pulse As Feature #1 Note : Once you enter the feature programming mode, do not allow more than 15 seconds to pass between steps or the programming will be terminated. Chirp Function Parking light Function 1 chirp Arm 1 flash Arm 2 chirps Disarm 2 flashes Disarm 3 chirps Arm/ Door opened 3 flashes Disarm / Intrusion 4 chirps Disarm / Intrusion Constant On * Under Remote Start * LED Function LED Function Off Disarmed 1 flash... pause Zone 1 / Slow Flash Armed 2 flash... pause Zone 2 / Rapid Flashing PassiveArming/ Active Rearming 3 flash… pause Zone 3 / On (Solid) Valet Mode * Depend on programming feature select Transmitter Button System Function Remark Lock Doors & Arm System / Button - Defeat the Pre-detect stage of s/s - - Defeat the Pre-detect and full detect stages of s/s - - - City Mode or (3-second) Activate Panic function Press and Hold for 3 sec. or (3-second) Stop Panic function Press and Hold for 3 sec. (2-second) Silent Arming Activate during programming (2-second) Silent Disarming Unlock Doors & Disarm System / Button 2 - Two Steps Door Unlock & Disarm System Press twice within 3 sec. Trunk Release Press and Hold for 2 sec - Turn Off Remote Start Press twice within 2 sec. - Turn On Remote Start Press twice within 2 sec. Channel 1 13
+ Channel 2 + Channel 3 + Channel 4 2-WAY OLED REMOTE CONTR TRANSCEIVER OPERATION ONLY Button Function Selection For Two way Remote transceiver Confirm Button / Back to Main Page For Two way Remote transceiver Feature Selection For Two way Remote transceiver 14
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: . Reorient or relocate the receiving antenna. . Increase the separation between the equipment and receiver. . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. . Consult the dealer or an experienced radio/TV technician for help. FCC Caution :To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. To satisfy FCC RF exposure compliance requirements, this device should be used in hand-held, hand-operated configurations only. The device and its antenna must maintain a separation distance of 20cm or more from a person’s body, except for the hand and wrists, to satisfy RF exposure compliance. This device is designed to be used in a person’s hands and its operating configurations do not support normal transmissions while it is carried in pockets or holsters next tot a person’s body.

Navigation menu