Advance Security TR26 Remote Control User Manual

Advance Security Inc Remote Control MODEL 6876

a href="https://usermanual.wiki/Advance-Security" itemprop="url"> Advance Security >

Users Manual

MODEL X11RF-LCD REMOTE ENGINE STARTER WITH ALARM SYSTEM OWNER’S MANUAL WARNINGS: As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of. 1. Keep the transmitter out of children’s reach. 2. Do not leave anyone in the vehicle while running on remote control. 3. Alert servicing personnel that the vehicle can be started automatically. 4. Do not start the vehicle by remote while it’s in an enclosed area or garage. 5. Always apply the parking brake and lock the vehicle as you exit the vehicle. 6. The vehicle windows must be rolled up. 7. Should the unit malfunction, disconnect the fuse until the problem is corrected. 8. The use and operations of this system is the sole responsibility of the operator. 9. Some areas may have local ordinances that prohibit leaving a vehicle running on public streets. 10. Do not start the vehicle by remote while the standard transmission vehicle is parked at a steep place. 1
TABLE OF CONTENTS: A. REMOTE TRANSMITTER OPERATION ……………………………………….………………….……………………….. 4 B. 2-WAY LCD REMOTE CONTROL TRANSCEIVER OPERATION ..…………………………….…………………..…... 4 C. LED DISPLAY .……………..……………………………………………………………………….…………………….……. 4 D. CHIRP INDICATOR ..………..……………………………………………………………………………..…………………... 4 E. PARKING LIGHT …….……..…………………………………………………………………………..………………………. 4 F. ACTIVE ARMING – ARM & LOCK .………………………………………………………………………………………..…. 4 Ajar Warning / Silent Arming / Disarming / Sensor By-Pass / Hidden Alarm Mode G. PASSIVE ARMING .…………………………………………..………………………………………………………….…..… 5 Passive Arming with Passive Door Locking / Passive Arming By-Pass H. ACTIVE DISARMING – UNLOCK & DISARM .………………………………………………………………..……………. 5 Tamper Disarming / Pathway Illumination / Two Steps Door Unlock / Automatic Re-Arm I. DISARMING WITHOUT A TRANSMITTER .……………..…………………………………………………………………... 6 Overrides the Alarm without Password Pin Code / Overrides the Alarm With Password Pin Code J. VALET MODE .……………..…………………………………………………………………….………….………………….. 6 K. CAR LOCATOR .……………………………………………………………………….……………………………………..… 7 L. PANIC FUNCTION .……………………………………………………………………………..….……………………….….. 7 M. TRIGGER THE SYSTEM .………………………………………..………………………..…………………………………... 7 Stop The Melody Sound / Noise Abatement Circuit N. ANTI CAR- JACKING .………………………………………………………………………………….………………..…….. 7 O. SYSTEM’S TRIGGER CHECK ……………………………………………………………….….….…..……………………. 8 P. SYSTEM’S STATUS CHECK ……………………………………………………………..……….……………………….…. 8 Q. DRIVER PAGING / LOSE AND FOUND ………………………….…………..……………………...…………………...… 8 R. DOME LIGHT CONVENIENCE DELAY & SUPERVISION ……………………..………………….……………………... 8 S. IGNITION CONTROL THE DOOR LOCK/UNLOCK. ………..………………….……………………………………….…. 9 T. TRUNK RELEASE (CHANNEL 3) OUTPUT ………..……………………………………………….………………………. 9 U. CHANNEL 4 / 5 / 6 / 7 TIMER CONTROL OUTPUT ………..…………………………………………………………..….. 9 V. POWER ON MEMONRY: ………..……………………………………………………………….…….….…………………... 9 REMOTE START OPERATION: A. TO REMOTE START THE VEHICLE ………..………………………………………………………………………..……... 9 B. TO OPERATE THE VEHICLE WHILE RUNNING ON THE REMOTE START ……………………………………..…... 9 C. TEMPORARY STOP FEATURE ……………………………………………….………………….…….………………….… 9 D. TURBO TIMER MODE ……………………..………………………………….……………….………...…………………… 10 E. TIMER / TEMPERATURE START …………………………………………….…………….……..………………………… 10 3 (2 or 1) Hours Timer Start / Daily Timer Start / Cancel the Timer Start F. TEMPERATURE CHECK …………….……………………………………………….….……….……………………….… 10 G. TO TURN OFF THE REMOTE START ……………………………………………….….…….………………………………11 H. SHUT-DOWN INPUT FOR REMOTE STARTER ………………………….………………………..……………………... 11 I. DISABLING THE REMOTE START SYSTEM …………………………….……………………..…….………………….… 11 LCD REMOTE TRANSCEIVER: A. BATTERY REPLACEMENT ……………………………….……………………………………………………………….….. 11 B. THE REMOTE LCD ICONS WITH FUNCTION ……….……………………………………………………………………... 11 C. PROGRAMMING OF THE LCD REMOTE TRANSCEIVER …………………………………………………………….…. 12 1. Screen Lamp ON 2. Power Save Mode 3. Clear The Flash Icon and Melody Sound 4. Stop The Melody Sound. 5. Button Lock 6. Vibration / Melody Mode 7. Enable / Disable Bi Sound While Pressing Button: 8. Low Battery Indication. 9. Set Up Fixed Count Down Timer 10. Out Of The Range Check 11. Illumination 12. Second Vehicle Security System Operation D. TIMER SETTING ……………………………….………………………………………………….………………………..… 14 1. Timer Setting. 2. Alert Alarm Timer Setting 3. Count Down Timer Setting 4. Time Set-Up For “Daily Timer Start” 2
Download:
Mirror Download [FCC.gov]
Document ID897758
Application IDiL73/BatkHr9nGMFRxHvVA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize47.97kB (599573 bits)
Date Submitted2008-02-01 00:00:00
Date Available2008-02-01 00:00:00
Creation Date2008-01-11 10:30:35
Producing SoftwareAcrobat Distiller 7.0.5 (Windows)
Document Lastmod2008-01-14 13:52:28
Document TitleMODEL 6876
Document CreatorAcrobat PDFMaker 7.0.7 for Word
Document Author: CINDY
FCC ID Filing: H5OTR26

Navigation menu