Advanced Card Systems ACM1252 Smart Card Reader Module User Manual Rev

Download:
Mirror Download [FCC.gov]
Document ID	2558995
Application ID	UVMeSmmReZblWbbWKIV6dQ==
Document Description	Users Manual Rev
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	20.75kB (259365 bits)
Date Submitted	2015-03-18 00:00:00
Date Available	2015-03-04 00:00:00
Creation Date	2017-10-13 19:29:34
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-13 19:29:34
Document Title	Users Manual Rev

ACM1252 NFC Reader Module
Reference Information
ACM1252 NFC Reader Module Technical
Reference Information V1.00
Subject to change without prior notice
info@acs.com.hk
www.acs.com.hk
Version History
Date
2015-03-16
By
Changes
●
Version
1.00
●
Page 2 of 7
ACM1252 NFC Reader Module Reference Information
1.00
info@acs.com.hk
www.acs.com.hk
Table of Contents
1.0.
Description............................................................................................................... 4
2.0.
Features ................................................................................................................... 4
3.0.
Absolute Maximum Ratings .................................................................................... 5
4.0.
Recommended Operation Conditions.................................................................... 5
5.0.
Pin Descriptions ...................................................................................................... 5
6.0.
Antenna .................................................................................................................... 5
7.0.
Mechanical Dimensions .......................................................................................... 6
8.0.
Notice ....................................................................................................................... 6
9.0.
Labeling of end‐user equipment ............................................................................ 7
Page 3 of 7
ACM1252 NFC Reader Module Reference Information
1.00
info@acs.com.hk
www.acs.com.hk
1.0. Description
The ACM1252 NFC Reader module is a 13.56MHz transceiver designed to read Radio Frequency
Identification (RFID) tags. This module is based on an NXP Semiconductors PN512 completely
integrated for all kinds of passive contactless communication methods and protocols at 13.56MHz.
The ACM1252’s antenna is integrated into the circuit board so there is no external antenna required.
2.0. Features
●
●
●
USB 2.0 Full Speed Interface
Contactless Smart Card Reader:
o 13.56MHz Carrier Frequency
Read/Write speed of up to 424 kbps
Detachable antenna for contactless tag access, with card reading distance of up to 50
mm (depending on tag type)
Support for ISO 14443 Part 4 Type A and B cards, MIFARE, FeliCa, and all four types of
NFC (ISO/IEC 18092 tags)
Built-in anti-collision feature (only one tag is accessed at any time)
NFC Support:

Card reader/writer mode

Peer-to-Peer mode

Card Emulation mode
Built-in Peripherals:
user-controllable bi-color LED
user-controllable Monotone Buzzer
●
USB Firmware Upgradability
●
Support Android
●
Compliant with the following standards:
TM
3.1 or above
ISO 18092
ISO 14443
LASCOM
CE
FCC
VCCI
MIC
KC Mark
N-Mark
PC/SC
CCID
Microsoft® WHQL
RoHS2
REACH
Page 4 of 7
ACM1252 NFC Reader Module Reference Information
1.00
info@acs.com.hk
www.acs.com.hk
3.0. Absolute Maximum Ratings
SYMBOL
Description
Min
Max
Units
VDD
Support Voltage to J5’s Pin 5 and Pin 2
4.2
5.5
Tamb,abs
Storage Temperature Range
-40
85
℃
Stress beyond those listed under the Absolute Maximum Ratings may cause permanent damage to
device. These are stress ratings only and functional operation of the device at these or any other
conditions beyond those indicated under Recommended Operating Conditions are not implied.
Exposure to absolute‐maximum‐rated conditions for extended periods may affect device reliability
4.0. Recommended Operation Conditions
SYMBOL
Description
Min
Normal
Max
Units
VDD
Support Voltage to J5’s Pin 5 and Pin 2
4.75
5.25
Tstorage
Storage Temperature Range
-10
25
60
℃
Toperation
Operation Temperature Range
25
50
℃
Humidity
Humidity Range
90
Fc
Carrier Frequency Range
13.553
13.56
13.567
MHz
Ioperation
Current Consumption
100
200
mA
5.0. Pin Descriptions
The ACM1252 has a five pins connector interface between the module and the host, identified by ref
J7. Pins assignment are given in the table below
PIN
NAME
Type
Description
UVCC
Power
D-
Input/output
Differential data lines that conform to the
USB v2.0 standard
D+
Input/output
Differential data lines that conform to the
USB v2.0 standard
UGND
Power
Power Ground
GND
Power
Shielding Ground
Supply Voltage
6.0. Antenna
The Detachable antenna is etched in the copper on the Top layer of the circuit board. The antenna
consists of three loops of 0.04” wide copper with 0.02” spacing.
Page 5 of 7
ACM1252 NFC Reader Module Reference Information
1.00
info@acs.com.hk
www.acs.com.hk
7.0. Mechanical Dimensions
MAIN Board:
Antenna Board:
8.0. Notice
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC/IC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
The device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation
Page 6 of 7
ACM1252 NFC Reader Module Reference Information
1.00
info@acs.com.hk
www.acs.com.hk
Warning: Changes or modifications not expressly approved by the Advanced Card Systems Ltd.
could void the user's authority to operate the equipment.
Installation in end‐user equipment
This device has been modularly approved and is intended solely for use in Advanced Card Systems
Ltd. products. Advanced Card Systems Ltd. will retain control over the final installation of the device,
such that compliance in the end‐user equipment is assured. The end‐user equipment will be tested
for spurious and radiated emissions to ensure the end device complies with FCC Part 15 limits.
9.0. Labeling of end‐user equipment
This device has been modularly approved. The manufacturer, product name, and FCC this product
must appear on the outside label of the end‐user equipment as follows:
FCC ID: V5MACM1252
Product Code: ACM1252
Page 7 of 7
ACM1252 NFC Reader Module Reference Information
1.00
info@acs.com.hk
www.acs.com.hk

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : 
Create Date                     : 2015:03:16 15:38:15+08:00
Modify Date                     : 2015:03:16 08:48:23-07:00
Subject                         : 
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : 
Description                     : 
Title                           : 
Creator Tool                    : 
Metadata Date                   : 2015:03:16 08:48:23-07:00
Keywords                        : 
Producer                        : Foxit Reader PDF Printer Version 7.0.6.1107
Document ID                     : uuid:82b1bb41-abca-4570-8eba-06073a98637c
Instance ID                     : uuid:d81eb6b9-a582-4378-80e4-660bf043428d
Page Count                      : 7

EXIF Metadata provided by EXIF.tools