Advanced Card Systems ACR123 ACR123 Contactless Reader User Manual

Advanced Card Systems Limited ACR123 Contactless Reader Users Manual

Users Manual

Subject to change without prior notice info@acs.com.hk www.acs.com.hk Name Signature Date Prepared by: Kit Au 2013-03-27 Reviewed by: Approved by: ACR123 User Manual V1.00 ACR123 User Manual
ACR123 User Manual info@acs.com.hk Version 1.00.00 www.acs.com.hk Page 2 of 13Version History Date By Changes Version 2013-03-27 Kit Au ● First Release 1.00.00 ●
ACR123 User Manual info@acs.com.hk Version 1.00.00 www.acs.com.hk Page 3 of 13Table of Contents 1.0. Introduction ...............................................................................................................4 2.0. Features .....................................................................................................................5 3.0. Architecture...............................................................................................................6 4.0. ACR123 Operating Procedure..................................................................................7 4.1. Driver installation Procedure ........................................................................................................7 4.2. Operation Example.....................................................................................................................10 Appendix A. Parameter sheet ......................................................................................... 12
ACR123 User Manual info@acs.com.hk Version 1.00.00 www.acs.com.hk Page 4 of 131.0. Introduction The ACS contactless reader is a communication device between the computer and the smart card through the Serial host interface. It is compliant to the ISO14443 supporting contactless smart card and is also compliant to the MasterCard PayPass and Visa PayWave standard. The compliance to the PayPass and PayWave standard widens the supported cards and strengthens the contactless product line’s salability especially in the payment industry.
ACR123 User Manual info@acs.com.hk Version 1.00.00 www.acs.com.hk Page 5 of 132.0. Features • Supports contactless smart cards o ISO14443 Types A&B compatible smart card interface o ISO18092 Tag Support (Phase 2) o MasterCard PayPass and Visa PayWave Compliant Cards o High communication speed of up to 848 kbps o Reading distance of up to 100 mm • Supports SAM contact cards o ISO7816-1/2/3 compatible SAM smart card interface o 3 SAM slots o Supports T0 and T1 CPU card • Supports 4 LEDs for user interface • Supports monotone buzzer/Speak • Supports mono color LCD (128 x 64) • RS232 Interface (up to115.2 kbps) with DB9 connector/ USB2.0 Full Speed • Power supply support USB • Firmware upgradable • PC-Linked OS platform support o Windows 98 and up o Mac 10.5 and up o Linux • Compliance to standards o CE/FCC o VCCI o RoHS o REACH o EMV Level 1 and EMV Level 2 • Certifications o CE/FCC o VCCI o RoHS o REACH o EMV Level 1 and EMV Level 2
ACR123 User Manual info@acs.com.hk Version 1.00.00 www.acs.com.hk Page 6 of 133.0. Architecture STM32 be the main processor for communication with POS, control the contactless chip, SAM and Peripherals. RC531 act as a contactless chip To perform communication between Main processor and contactless tag For software architecture, ACR123 built-in simple OS that used for tasks management, resource management, etc. Tasks included PICC Polling, SAM checking, Serial and USB communication flow, etc. Carrier Frequency = 13.56MHz
ACR123 User Manual info@acs.com.hk Version 1.00.00 www.acs.com.hk Page 7 of 134.0. ACR123 Operating Procedure 4.1. Driver installation Procedure Hardware requires:  ACR123  PC with OS windows XP or above Software requires:  Driver “Microsoft CCID Driver Version 5.2.3790.2724.rar” Steps: 1. Extract the file “Microsoft CCID Driver Version 5.2.3790.2724.rar” 2. Plug-in the ACR123 to PC’s USB 3. Wait for driver install message 4. Select “Install from a list or specific location (Advanced)”, then “Next>”
ACR123 User Manual info@acs.com.hk Version 1.00.00 www.acs.com.hk Page 8 of 13 5. Select “Don’t search. I will choose the driver to install”, then “Next>” 6. if present “USB Smart Card reader”, select it and then “Next>”
ACR123 User Manual info@acs.com.hk Version 1.00.00 www.acs.com.hk Page 9 of 13 if No, click “Have Disk…” Click “Browse…” to locate the driver (usbccid.inf) location, click “Open” Select “USB Smart Card reader”, and then “Next>” 7. Click “Continue Anyway”
ACR123 User Manual info@acs.com.hk Version 1.00.00 www.acs.com.hk Page 10 of 13 8. Wait until the below screen appear, click “Finish” to complete 9. Driver Installation Complete 4.2. Operation Example Hardware requires:  ACR123 x 1  PC with OS windows XP or above  Test card x 1 (provided by ACS) Software requires:  APDU.exe (for example) Steps: 1. Plug in the reader into the PC 2. Place the Card on the top of the reader 3. Open “APDU.exe”
ACR123 User Manual info@acs.com.hk Version 1.00.00 www.acs.com.hk Page 11 of 13 4. Select “T1”, and enter the APDU into Message Felid 5. Press “Connect” 6. Press “Transmit” to start the testing 7. Complete the operation Message Felid
ACR123 User Manual info@acs.com.hk Version 1.00.00 www.acs.com.hk Page 12 of 13Appendix A. Parameter sheet Device ACR123 Smart Card Reader/Writer Power supply Supply voltage................................ Regulated 5V DC Supply current ................................ <500mA Serial Interface Type ............................................... RS232/RS485 Connector ...................................... supplied together with the reader Speed............................................. 9600bps – 250Kbps Universal Serial Bus Interface Type ............................................... USB, four lines: +5V, GND, D+ and D- Connector ...................................... supplied together with the reader Speed............................................. Full Speed Device, 12 Mbps SAM Smart Card Interface Standard ........................................ ISO 7816 1/2/3, T=0 and T=1 Supply current................................ max. 50mA Smart card voltage ......................... 5V / 3V / 1.8V Smart card read / write speed ........ 9600 – 344kbps Short circuit protection .................. +5V / GND on all pins CLK frequency ............................... 4.0MHz Contactless Smart Card Interface Standard...............................................ISO 14443 A & B Parts 1-4 Protocol ................................................ISO14443 T=CL for ISO14443-4 compliant cards and T=CL Emulation for MIFARE 1K/4K Smart card read / write speed................106 kbps, 212 kbps, 424 kbps and 848 kbps Operating Frequency for Contactless Cards Access Operating Frequency .............................13.56 MHz Antenna Antenna Size..........................................75mm x 75mm Operating distance.................................up to 50 mm (Depend on Card Type) Built-in peripherals 1 x Speaker 4 x Single Color LED 4 x Tri-Color Antenna LED Backlight 1 x Micro SD 1 x LCD (128*64 FSTN Type) with backlight Case Dimensions .................................... 159.0 mm (L) x 100.0 mm (W) x 21.0mm (H) [without Cradle] ................................... 177.4mm (L) x 100.0mm (W) x 94.5mm (H) [with Cradle]
ACR123 User Manual info@acs.com.hk Version 1.00.00 www.acs.com.hk Page 13 of 13Color .............................................. Black Operating Conditions Temperature .................................. 0 - 50° C Humidity ......................................... 10% - 80% Cable Connector Length ....................................................2.0m (USB) Standard/Certifications CE, FCC EN300330 EN55022 & EN55024 EN55014 EMV L1 & EMV L2 OS Windows 98, ME, 2K, XP, 7 OEM OEM-Logo possible, customer-specific colors, casing, and card connector FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu