Advanced Card Systems ACR123 ACR123 Contactless Reader User Manual
Advanced Card Systems Limited ACR123 Contactless Reader Users Manual
Users Manual
ACR123 User Manual ACR123 User Manual V1.00 Name Prepared by: Kit Au Signature Date 2013-03-27 Reviewed by: Approved by: Subject to change without prior notice info@acs.com.hk www.acs.com.hk Version History Date By 2013-03-27 Kit Au Changes ● First Release Version 1.00.00 ● Page 2 of 13 ACR123 User Manual Version 1.00.00 info@acs.com.hk www.acs.com.hk Table of Contents 1.0. Introduction ............................................................................................................... 4 2.0. Features ..................................................................................................................... 5 3.0. Architecture ............................................................................................................... 6 4.0. ACR123 Operating Procedure.................................................................................. 7 4.1. 4.2. Driver installation Procedure ........................................................................................................7 Operation Example.....................................................................................................................10 Appendix A. Parameter sheet ......................................................................................... 12 Page 3 of 13 ACR123 User Manual Version 1.00.00 info@acs.com.hk www.acs.com.hk 1.0. Introduction The ACS contactless reader is a communication device between the computer and the smart card through the Serial host interface. It is compliant to the ISO14443 supporting contactless smart card and is also compliant to the MasterCard PayPass and Visa PayWave standard. The compliance to the PayPass and PayWave standard widens the supported cards and strengthens the contactless product line’s salability especially in the payment industry. Page 4 of 13 ACR123 User Manual Version 1.00.00 info@acs.com.hk www.acs.com.hk 2.0. Features • • Supports contactless smart cards ISO14443 Types A&B compatible smart card interface ISO18092 Tag Support (Phase 2) MasterCard PayPass and Visa PayWave Compliant Cards High communication speed of up to 848 kbps Reading distance of up to 100 mm Supports SAM contact cards ISO7816-1/2/3 compatible SAM smart card interface 3 SAM slots Supports T0 and T1 CPU card • Supports 4 LEDs for user interface • Supports monotone buzzer/Speak • Supports mono color LCD (128 x 64) • RS232 Interface (up to115.2 kbps) with DB9 connector/ USB2.0 Full Speed • Power supply support USB • Firmware upgradable • PC-Linked OS platform support • • Windows 98 and up Mac 10.5 and up Linux Compliance to standards CE/FCC VCCI RoHS REACH EMV Level 1 and EMV Level 2 Certifications CE/FCC VCCI RoHS REACH EMV Level 1 and EMV Level 2 Page 5 of 13 ACR123 User Manual Version 1.00.00 info@acs.com.hk www.acs.com.hk 3.0. Architecture STM32 be the main processor for communication with POS, control the contactless chip, SAM and Peripherals. RC531 act as a contactless chip To perform communication between Main processor and contactless tag Carrier Frequency = 13.56MHz For software architecture, ACR123 built-in simple OS that used for tasks management, resource management, etc. Tasks included PICC Polling, SAM checking, Serial and USB communication flow, etc. Page 6 of 13 ACR123 User Manual Version 1.00.00 info@acs.com.hk www.acs.com.hk 4.0. ACR123 Operating Procedure 4.1. Driver installation Procedure Hardware requires: ACR123 PC with OS windows XP or above Software requires: Driver “Microsoft CCID Driver Version 5.2.3790.2724.rar” Steps: 1. Extract the file “Microsoft CCID Driver Version 5.2.3790.2724.rar” 2. Plug-in the ACR123 to PC’s USB 3. Wait for driver install message 4. Select “Install from a list or specific location (Advanced)”, then “Next>” Page 7 of 13 ACR123 User Manual Version 1.00.00 info@acs.com.hk www.acs.com.hk 5. Select “Don’t search. I will choose the driver to install”, then “Next>” 6. if present “USB Smart Card reader”, select it and then “Next>” Page 8 of 13 ACR123 User Manual Version 1.00.00 info@acs.com.hk www.acs.com.hk if No, click “Have Disk…” Click “Browse…” to locate the driver (usbccid.inf) location, click “Open” Select “USB Smart Card reader”, and then “Next>” 7. Click “Continue Anyway” Page 9 of 13 ACR123 User Manual Version 1.00.00 info@acs.com.hk www.acs.com.hk 8. Wait until the below screen appear, click “Finish” to complete 9. Driver Installation Complete 4.2. Operation Example Hardware requires: ACR123 x 1 PC with OS windows XP or above Test card x 1 (provided by ACS) Software requires: APDU.exe (for example) Steps: 1. Plug in the reader into the PC 2. Place the Card on the top of the reader 3. Open “APDU.exe” Page 10 of 13 ACR123 User Manual Version 1.00.00 info@acs.com.hk www.acs.com.hk 4. Select “T1”, and enter the APDU into Message Felid Message Felid 5. Press “Connect” 6. Press “Transmit” to start the testing 7. Complete the operation Page 11 of 13 ACR123 User Manual Version 1.00.00 info@acs.com.hk www.acs.com.hk Appendix A. Parameter sheet Device ACR123 Smart Card Reader/Writer Power supply Supply voltage................................ Regulated 5V DC Supply current ................................ <500mA Serial Interface Type ............................................... RS232/RS485 Connector ...................................... supplied together with the reader Speed............................................. 9600bps – 250Kbps Universal Serial Bus Interface Type ............................................... USB, four lines: +5V, GND, D+ and DConnector ...................................... supplied together with the reader Speed............................................. Full Speed Device, 12 Mbps SAM Smart Card Interface Standard ........................................ ISO 7816 1/2/3, T=0 and T=1 Supply current ................................ max. 50mA Smart card voltage ......................... 5V / 3V / 1.8V Smart card read / write speed ........ 9600 – 344kbps Short circuit protection .................. +5V / GND on all pins CLK frequency ............................... 4.0MHz Contactless Smart Card Interface Standard ...............................................ISO 14443 A & B Parts 1-4 Protocol ................................................ISO14443 T=CL for ISO14443-4 compliant cards and T=CL Emulation for MIFARE 1K/4K Smart card read / write speed................106 kbps, 212 kbps, 424 kbps and 848 kbps Operating Frequency for Contactless Cards Access Operating Frequency .............................13.56 MHz Antenna Antenna Size..........................................75mm x 75mm Operating distance.................................up to 50 mm (Depend on Card Type) Built-in peripherals 1 x Speaker 4 x Single Color LED 4 x Tri-Color Antenna LED Backlight 1 x Micro SD 1 x LCD (128*64 FSTN Type) with backlight Case Dimensions .................................... 159.0 mm (L) x 100.0 mm (W) x 21.0mm (H) [without Cradle] ................................... 177.4mm (L) x 100.0mm (W) x 94.5mm (H) [with Cradle] Page 12 of 13 ACR123 User Manual Version 1.00.00 info@acs.com.hk www.acs.com.hk Color .............................................. Black Operating Conditions Temperature .................................. 0 - 50° C Humidity ......................................... 10% - 80% Cable Connector Length ....................................................2.0m (USB) Standard/Certifications CE, FCC EN300330 EN55022 & EN55024 EN55014 EMV L1 & EMV L2 OS Windows 98, ME, 2K, XP, 7 OEM OEM-Logo possible, customer-specific colors, casing, and card connector FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Page 13 of 13 ACR123 User Manual Version 1.00.00 info@acs.com.hk www.acs.com.hk
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Extract Author : a Create Date : 2013:04:16 18:24:02+08:00 Modify Date : 2013:04:17 21:04:09-07:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : PScript5.dll Version 5.2 Metadata Date : 2013:04:17 21:04:09-07:00 Format : application/pdf Creator : a Title : Microsoft Word - 1-User Manual-已修改.doc Document ID : uuid:c6071119-7da9-47e0-972d-18d4f0530e44 Instance ID : uuid:2c77ab15-693c-4549-8d79-300a3bcc69a8 Page Count : 13EXIF Metadata provided by EXIF.tools