Advantech Co FWA-1010 Network Platform User Manual
Advantech Co Ltd Network Platform Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3494363 |
| Application ID | UZxQPDIRt7St5vZWeoWZQw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 199.42kB (2492783 bits) |
| Date Submitted | 2017-08-03 00:00:00 |
| Date Available | 2018-01-31 00:00:00 |
| Creation Date | 2017-07-27 14:31:29 |
| Producing Software | Microsoft® Word 2010 |
| Document Lastmod | 2017-07-27 14:31:29 |
| Document Title | Users Manual |
| Document Creator | Microsoft® Word 2010 |
| Document Author: | Xavier.Hsu |
FWA-1010VC Network system with Intel® Atom® C2000 Processor Platform Packing List Before you begin installing your card, please make sure that the following items have been shipped: • One FWA-1010VC System • One space of accessories • One warranty certificate If any of these items are missing or damaged, please contact your distributor or sales representative immediately. Note 1: Acrobat Reader is required to view any PDF file.Acrobat Reader can be downloaded at: www.adobe.com/Products/acrobat/readstep2. html (Acrobat is a trademark of Adobe) For more information on this and other Advantech products, please visit our website at: http://www.advantech.com.tw/support http://www.advantech.com For technical support and service, please visit our support website at: http://www.advantech.com/support This manual is for the CGS6000 series Rev. A Part No. TBA Print in China Draft Edition, Specifications Main Board Functions • CPU: Dual Intel® C2000, L2 Catch: 2MB/4MB (by CPU SKU) • Memory: Supports two DDR3/DDR3L Memory DIMMs up to 1600 MHz, depending on CPU SKU • Storage: Up to 1 x 2.5" SSD bracket(by product sku), 1x M.2 2280 SSD slot • Dimensions: 250 x 44 x 190.4mm (W x H x D) • Power Supply: 60W, 100 V ~ 240 V @ 50 ~ 60 Hz, full range 1. FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT: 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement: 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body 2. HARDWARE INSTALLATION INTRODUCTION 2.1 MEMORY INSTALLATION 2.1.1 Open the top cover and insert DDR3 UDIMM module into the socket, insert RAM module into black socket first then insert RAM module in orange socket 2.2 2.5” SSD BRACKET INSTALLATION=> 2.2.1 Get 4 pcs M3*4.0L screws & SSD bracket from accessory box M3*4.0L screw 2.2.2 Use screwdriver locking 4 screws to fix 2.5” SSD in SSD bracket. 2.2.3 Get 4 pcs M3*4L screws from accessory box M3*4 screw 2.2.4 Use screwdriver locking 4 screws to fix SSD bracket on FWA-1010VC, SSD SATA & power connector side needs face from chassis side. 2.2.5 Please connect SATA & Power cable to SSD connectors. 2.3 M.2 SSD INSTALLATION 2.3.1 Get M.2 module & Screw M3*3.5 (P/N: 1930006888-01) 2.3.2 Use screwdriver locking a screw to fix M.2 module and FWA-1010VC M/B. 2.4 WallMount Kit Installation Get 6 pcs M3*4L screws from accessory box Use screwdriver locking 6 screws to fix WallMount Kit bracket on FWA-1010VC 2.5 RackMount Kit Installation Get 6 pcs M3*4L screws from accessory box Plug in Power Adaptor into power Adaptor bracket Revert power adaptor bracket into rack-mounting bracket Please use screwdriver locking 6 screws to fix RackMount Kit bracket on FWA-1010VC 3. BIOS CONSOLE REDIRECTION SETTING 3.1 CONSOLE REDIRECTION FUNCTION INSTALL &SETTING 3.1.1 FWA-1010VC doesn’t have a VGA function; user needs to use console-redirection cable(please contact your Advantech contact window to order this cable) to control FWA-1010VC function, 3.1.2 Please use RJ45 to console cable to connect FWA-1010VC’s Console port and Test PC’s RS232 COM port, user may press “DEL” or “ESC” key into BIOS by console-redirection utility 3.1.3 Choose “Advanced” “Serial Port Console Redirection” item. 3.1.4 Default console redirection setting of FWA-1010VC BIOS is COM1 3.1.5 Baud rate setting is 115200,8,n1, and “Redirection after BIOS POST” is Always. 4. FWA-1010VC QUICK START IMAGE INSTALLATION AND SETTING Advantech provided FWA-1010VC Quick Start Linux image which is based on Ubuntu Linux distribution and is configured to run on FWA-1010VC for vE-CPE and SD-WAN applications. Useful software utilities and tools which are either Advantech proprietary or are under opens source license are integrated into the image to provide customers with a quick and easy approach for platform evaluation. Please contact your Advantech representative for getting FWA-1010VC Quick Start Linux image and Getting Started Guide. 5. FWA-1010VC BIOS FLASH STEP 5.1 FWA--1010VC BIOS flash step. FWA-1010VC BIOS V016 or latest version are support flash BIOS by UEFI shell, when user needs flash er below step to flash FWA-1010VC BIOS. 5.1.1 Please copy BIOS & flash tool (ex: fpt.efi) in USB flash, and insert USB flash to FWA-1010VC. 5.1.2 Kindly power up system, and choose “Save & Exit” “Boot Overider” “UFEI: Bulit-in EFI Shell” 5.1.3 Please press “ESC” to skip startup.nsh, it will show “Shell >” message 5.1.4 When system only install a USB flash, EFI shell will detect USB flash as “fs0”, if system install 2 USB flash , EFI shell will detect USB flash as “fs0” and “fs1”. 5.1.5 Kindly key-in “USB ID” whether BIOS file is located. (Example: the system only install a USB flash, it needs key-in “fs0” into USB flash) 5.1.6 Kindly key-in sub-directories whether BIOS file is located. (Example: the BIOS file put in /FWA1010VC/BIOS) 5.1.7 Kindly key-in “fpt.efi 0f “BIOS file” to flash FWA-1010VC BIOS, and please don’t power off system during the flash BIOS. 5.1.8 When BIOS flash finish. Please power off and re-power on system, the system BIOS will flash to new version. 6. SYSTEM PLATFORM SKUS FWA-1010VC-4CA2S: Tabletop 1x 60W Power Adaptor, CPU 4Core C2558 1x M.2 2280 SSD slot, 7x 1GbE Ethernet port, 2x 1GbE SFP port and 4x 1GbE switched Ethernet port with 1GbE uplink to CPU FWA-1010VC-8CA2S: Tabletop 1x 60W Power Adaptor, CPU 8Core C2758, 1x 2.5” SSD bracket, 1x M.2 2280 SSD slot, 7x 1GbE Ethernet port, 2x 1GbE SFP port and 4x 1GbE switched Ethernet port with 1GbE uplink to CPU 6.1 System Architecture FWA-1010VC System Architecture 6.1.1 Front Side FWA-1010VC System Front View 6.1.2 Rear Side FWA-1010VC System Rear View 6.2 System Block Diagram FWA-1010VC System Block Diagram 7. NAMB-1010VCMB JUMPER SETTING AND CONNECTOR LIST 7.1 Connector NAMB-1010VCMB Top side Connector Placement NAMB-1010VCMB Bot side Connector Placement Location DC_JACK1 CN75 CN41 CN76 Description DC POWER JACK 4P 90D(M) DIP 2DC-0006-B01 USB Conn 4P 90D(F) DIP USB-1F0401-2W PHONE JACK RJ45 8P 1.02mm 90D(F) DIP C20GY0-500 For USB Function. For Console. For 2x1 LAN w/ Combo RM3-1TJA9V Media. SFP+ 1x2 Cage 90D(M) 3S1020F7-AJ4-4F CN79 RJ45_40P_RB4-109D9F1D JP1 DC12V Power Input. PHONE JACK RJ45 28P 2.54mm 90D(F) DIP CN77 CN78 Comment PHONE JACK RJ45 12P 1.02mm 90D(F) DIP C23GY0-590 For 2x1 SFP w/ Combo Media. For 1x4 LAN w/ 88E6141 switch. For single LAN function. PIN HEADER 3x1P 2.0mm 180D(M) DIP For CPU CMOS Clean w/ 2000-13 WS Jumper. Location CN44 FAN1 SPI1 CN40 CN74 CN45 CN1 CN30 CN4 CN_PWR1 J3 J6 J5 J7 J4 CN_MINI1 CN71 CN70 Description WAFER BOX 2P 3.96mm 180D(M) DIP 3961-WS-2-LF WAFER 2.54 1*4P 180D(M) DIP 744-81-04TW30 IC SKT 8P SMD 8P SMD ACA-SPI-004-K01 WAFER BOX 2x5P 2.00mm 180D(M) DIP 24W2140-10S10 PCI-E MKEY NGFF_75P_AS0BC21-S40BM-7H WAFER 4P 2.5mm 180D(M) DIP 24W1161-04S10-01T Serial ATA 7P 1.27mm 180D(M) DIP WATM-07DBN4A3B8 Comment For Power Switch Cable. For system cooler use. For CPU BIOS EEPROM. For TPM and LPC function. For SATA3 6G SSD Card. For SATA3 6G HDD Power. For SATA3 6G function. DIMM DDR3 240P orange DIP 15u inch For ATH4017-P3E-4F ( Second ) DIMM DDR3 240P orange DIP 15u inch ATH4017-P3E-4F WAFER BOX 2P 2.0mm 180D(M) DIP A2001WV2-2P WAFER BOX 2P 2.0mm 180D(M) DIP A2001WV2-2P WAFER BOX 2P 2.0mm 180D(M) DIP A2001WV2-2P WAFER BOX 2P 2.0mm 180D(M) DIP A2001WV2-2P WAFER BOX 3P 2.0mm 180D(M) DIP 2001-WS-3 For System HDD LED. For System LTE LED. For System WIFI LED. For Software Define LED A2001WV2-2P button SIM card conn. 6p 2.54mm 90D(F) SMD 5210622 NGFF_75P_AS0BC21-S40BE-7H A2 For system power LED. For AS0B226-S40Q-7H DIMM For DDR DIMM A0 ( Main ) WAFER BOX 2P 2.0mm 180D(M) DIP MINI PCI 52P 0.8mm 90D(F) SMD DDR Software For LTE Module. For SIM Card. For Wifi Module. Define 7.2 Jumper Setting Clear CMOS Header (JP1) Use a three pin header. For Clear CMOS data Clear CMOS Jumper Definition Pitch: 2.00mm Jumper Circuit Comme 1-2 Installed Pull up Pull up to +VBAT 3.3V, Normal nt status (Default) 2-3 Installed Pull down Pull to ground to clear CMOS JP1 Symbol (NAMB-1010VCMB) Fan Header Locations of the fan headers shall accommodate circulation of fresh air from the front of the chassis. FAN Header 4 Pin (FAN1). FAN1 Symbol (NAMB-1010VCMB) SATA CONNECTOR SATA Connector (CN1) SATA3 6G CN1 Symbol (NAMB-1010VCMB) SATA Power CONNECTOR SATA Power Connector (CN45) CN45 Symbol (NAMB-1010VCMB) DC12V Power CONNECTOR Power Switch Connector(CN44) CN44 Symbol (NAMB-1010VCMB) LPC CONNECTOR LPC Connector(CN40) CN40 Symbol (NAMB-1010VCMB)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 25 Language : zh-TW Tagged PDF : Yes Author : Xavier.Hsu Creator : Microsoft® Word 2010 Create Date : 2017:07:27 14:31:29+08:00 Modify Date : 2017:07:27 14:31:29+08:00 Producer : Microsoft® Word 2010EXIF Metadata provided by EXIF.tools