Advantech Co FWA1012VC Network Security Platform User Manual FWA 1012VC v1 1

Advantech Co Ltd Network Security Platform FWA 1012VC v1 1

User Manual

Download: Advantech Co FWA1012VC Network Security Platform User Manual FWA 1012VC v1 1
Mirror Download [FCC.gov]Advantech Co FWA1012VC Network Security Platform User Manual FWA 1012VC v1 1
Document ID4059316
Application IDwSfA/r0BQzb7dnZ2bBCA5A==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize226.2kB (2827459 bits)
Date Submitted2018-11-04 00:00:00
Date Available2018-11-04 00:00:00
Creation Date2018-10-23 17:40:03
Producing SoftwareAcrobat Distiller 11.0 (Windows)
Document Lastmod2018-10-23 17:40:03
Document TitleMicrosoft Word - User Manual FWA-1012VC_v1.1
Document CreatorPScript5.dll Version 5.2.2
Document Author: vanessa

USER MANUAL
REVISION 1.1
DATE 2018/10/16
FWA‐1012VC
NETWORK SECURITY PLATFORM
Copyright 2014 Advantech Co. Ltd. All rights reserved.
Content
PREFACE ................................................................................................................................. 4
REVISION HISTORY ............................................................................................................................................................4
COPYRIGHT .........................................................................................................................................................................4
WARNINGS, CAUTIONS AND NOTES .................................................................................................................................5
SAFETY INSTRUCTIONS .....................................................................................................................................................6
DECLARATION OF CONFORMITY .......................................................................................................................................8
FCC Class B ..................................................................................................................................................................................................... 8
BSMI .................................................................................................................................................................................................................. 8
CCC ..................................................................................................................................................................................................................... 9
CE Mark ........................................................................................................................................................................................................ 10
TECHNICAL SUPPORT AND ASSISTANCE ....................................................................................................................... 10
WARRANTY AND RMA ................................................................................................................................................... 11
1.
INTRODUCTION ....................................................................................................... 12
1.1
1.2
1.2.1
1.2.2
1.3
1.4
1.5
1.5.1
1.5.2
1.5.3
1.6
1.6.1
1.6.2
2.
Front View .............................................................................................................................................................................. 13
Rear View ................................................................................................................................................................................ 13
SYSTEM LAYOUT .............................................................................................................................................. 14
BLOCK DIAGRAM ............................................................................................................................................. 15
COMPONENT INSTALLATION ......................................................................................................................... 16
Memory/2.5” SSD_HDD/ POE Module/ M.2 SSD/ LTE Module/WiFi Module ......................................... 16
Rack mount Kits ................................................................................................................................................................... 18
Antenna installation ........................................................................................................................................................... 20
OPTIMUM MOUNTING ENVIRONMENT ......................................................................................................... 21
Space Requirement ............................................................................................................................................................. 21
Temperature Requirement ............................................................................................................................................. 21
OPERATION ............................................................................................................... 22
2.1
2.2
2.3
2.3.1
2.3.2
2.3.3
2.3.4
2.4
3.
OVERVIEW ........................................................................................................................................................ 12
SYSTEM OUTLOOK ........................................................................................................................................... 13
POWERING UP/DOWN THE PLATFORM ........................................................................................................ 22
BOOTING FROM NETWORK VIA PXE ............................................................................................................. 23
LED BEHAVIOUR ............................................................................................................................................ 27
For the description of Lan port LEDs......................................................................................................................... 27
SFP LED indicator function in front: ........................................................................................................................... 27
RJ45 LED indicator function in front: ......................................................................................................................... 27
RJ45 LED indicator function w/ POE in front: ........................................................................................................ 28
MAIN BOARD CONNECTOR PLACEMENT ...................................................................................................... 29
BIOS.............................................................................................................................. 31
3.1
3.2
3.2.1
3.2.2
3.2.3
3.2.4
BIOS DEFAULTS.............................................................................................................................................. 31
BIOS SETUP MENU ........................................................................................................................................ 31
Main Setup Menu ................................................................................................................................................................. 32
Platform Setup Menu ......................................................................................................................................................... 35
Hardware setup menu ....................................................................................................................................................... 43
Setup POST & Boot Menu ................................................................................................................................................. 50
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 2
3.2.5
Save & Exit Menu ................................................................................................................................................................. 55
APPENDIX A: ACKNOWLEDGEMENTS .......................................................................... 57
APPENDIX B: GLOSSARY .................................................................................................. 58
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 3
PREFACE
Revision History
Date
6/August/2018
16/August/2018
17/August/2018
25/September/2018
Revision
0.1
0.2
1.0
1.1
Modifications
Initial version
Update Operation and BIOS section
Official release
Update chapter 1.5
Copyright
The documentation and the software included with this product are copyrighted by Advantech Co., Ltd.
Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any
time without notice.
No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means
without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended
to be accurate and reliable.
For more information about this and other Advantech products, please visit our website at:
http://www.advantech.com/
http://www.advantech.com/ePlatform/
For technical support and service, please visit our support website at:
http://support.advantech.com.tw/support/
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 4
Warnings, Cautions and Notes
Warning! Warnings indicate conditions, which, if not observed, can cause personal injury.
AVERTISSEMENT! Les avertissements indiquent des conditions qui, si elles ne sont pas observées,
peuvent provoquer des blessures.
Caution! Cautions are included to help you avoid damaging hardware or losing data.
ATTENTION! Des précautions sont incluses pour vous aider à éviter d'endommager le matériel ou de
perdre des données.
Note! Notes provide additional information.
Remarque! Les notes fournissent des informations supplémentaires.
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 5
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or
spray detergents for cleaning.
4. For plug‐in equipment, the power outlet socket must be located near the equipment and must be easily
accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment from overheating. DO NOT
COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the equipment to the power
outlet.
9. Position the power cord so that people cannot step on it. Do not place anything over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source to avoid damage by
transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be opened only by qualified
service personnel.
14. If one of the following situations arises, get the equipment checked by service personnel:
•
•
•
•
•
•
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it to work according to the user's manual.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
15. Do not leave this equipment in an environment where the storage temperature may go below ‐40° C (‐
40° F) or above 85° C (185° F). This could damage the equipment. The equipment should be in a controlled
environment.
16. Caution: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type recommended by the manufacturer, discard used batteries according to the manufacturer's
instructions.
17. The sound pressure level at the operator's position according to IEC 704‐1:1982 is no more than 70 dB
(A).
18. RESTRICTED ACCESS AREA: The equipment should only be installed in a Restricted Access Area.
19. DISCLAIMER: This set of instructions is given according to IEC 704‐1. Advantech disclaims all responsibility
for the accuracy of any statements contained herein.
French:
1. Lisez ces instructions de sécurité attentivement.
2. Conservez ce manuel d'utilisation pour référence ultérieure.
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 6
3. Débranchez cet équipement de toute prise secteur avant de le nettoyer. Utilisez un chiffon humide.
N'utilisez pas de détergent liquide ou pulvérisé pour le nettoyage.
4. Pour les équipements enfichables, la prise de courant doit être située près de l'équipement et doit être
facilement accessible.
5. Gardez cet équipement à l'abri de l'humidité.
6. Placez cet équipement sur une surface fiable pendant l'installation. Le laisser tomber ou le laisser tomber
peut causer des dommages.
7. Les ouvertures sur l'enceinte servent à la convection de l'air. Protégez l'équipement contre la surchauffe.
NE COUVREZ PAS LES OUVERTURES.
8. Assurez‐vous que la tension de la source d'alimentation est correcte avant de connecter l'équipement à la
prise de courant.
9. Placez le cordon d'alimentation de manière à ce que personne ne puisse marcher dessus. Ne placez rien
sur le cordon d'alimentation.
10. Toutes les mises en garde et les avertissements sur l'équipement doivent être notés.
11. Si l'équipement n'est pas utilisé pendant une longue période, débranchez‐le de la source d'alimentation
pour éviter tout dommage dû à une surtension transitoire.
12. Ne versez jamais de liquide dans une ouverture. Cela pourrait provoquer un incendie ou un choc
électrique.
13. N'ouvrez jamais l'équipement. Pour des raisons de sécurité, l'équipement doit être ouvert uniquement
par du personnel qualifié.
14. Si l'une des situations suivantes se présente, faites vérifier l'équipement par le personnel de service:
• Le cordon d'alimentation ou la prise est endommagé.
• Le liquide a pénétré dans l'équipement.
• L'équipement a été exposé à l'humidité.
• L'équipement ne fonctionne pas bien, ou vous ne pouvez pas le faire fonctionner selon le manuel de
l'utilisateur.
• L'équipement a été échappé et endommagé.
• L'équipement présente des signes évidents de rupture.
15. Ne laissez pas cet appareil dans un environnement où la température de stockage peut être inférieure à ‐
40 ° C ou supérieure à 85 ° C. Cela pourrait endommager l'équipement. L'équipement devrait être dans un
environnement contrôlé.
16. Attention: Danger d'explosion si la batterie est incorrectement remplacée. Remplacez uniquement par le
même type ou un type équivalent recommandé par le fabricant, jetez les piles usagées conformément aux
instructions du fabricant.
17. Le niveau de pression acoustique à la position de l'opérateur, conformément à la norme CEI 704‐1: 1982,
ne dépasse pas 70 dB (A).
18. ZONE D'ACCES RESTREINTE: L'équipement ne doit être installé que dans une zone d'accès restreint.
19. AVERTISSEMENT: Cet ensemble d'instructions est donné conformément à la CEI 704‐1. Advantech
décline toute responsabilité quant à l'exactitude des déclarations contenues dans ce document.
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 7
Declaration of Conformity
FCC CLASS B
Federal Communications Commission (FCC) Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) this device may not cause harmful interference and
2) this device must accept any interference received, including interference that may cause undesired
operation of the device
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
‐Reorient or relocate the receiving antenna.
‐Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co‐located or operating in conjunction with any other antenna or
transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20 centimeters
between the radiator and your body.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
BSMI
警告使用者：這是甲類資訊產品，在居住的環境中使用時，可能會造成射頻干擾，在這種情況下，使
用者會被要求採取某些適當對策。
安全指示
1. 請仔細閱讀此安全操作說明。
2. 請妥善保存此用戶手冊供日後參考。
3. 用濕抹布清洗設備前，請確認拔除電源線。請勿使用液體或去污噴霧劑清洗設備。
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 8
4. 對於使用電源線的設備，設備周圍必須有容易接觸到的電源插座。
5. 請勿在潮濕環境中試用設備。
6. 請在安裝前確保設備放置在可靠的平面上，意外摔落可能會導致設備損壞。
7. 設備機殼的開孔適用於空氣對，從而防止設備過熱。請勿覆蓋開孔。
8. 當您連接設備到電源插座前，請確認電源插座的電壓符合要求。
9. 請將電源線佈置在人們不易絆倒的位置，請勿在電源線上覆蓋任何雜物。
10. 請注意設備上所有的警告標示。
11. 如果長時間不使用設備，請拔除與電源插座的連結，避免設備被超標的電壓波動損壞。
12. 請勿讓任何液體流入通風口，以免引起火灾或短路。
13. 請勿自行打開設備。為了確保您的安全，請透過經認證的工程師來打開設備。
14. 如遇下列情况，請由專業人員維修：






電源線或插頭損壞；
設備內部有液體流入；
設備曾暴露在過度潮濕環境中使用；
設備無法正常工作，或您無法透過用戶手冊來正常工作；
設備摔落或損壞；
設備有明顯外觀損；
15. 請勿將設備放置在超出建議溫度範圍的環境，即不要低於0°C(‐20°C;‐4°F)或高於40°C(60°C;140°F)，
否則可能會造成設備損壞。
16. 注意：若電池更換不正確，將有爆炸危險。因此，只可以使用製造商推薦的同一種或者同等型號
的電池進行替換。請按照製造商的指示處理舊電池。
17. 根據IEC 704‐1:1982 規定，設備產生的音量不高於70 分貝。
18. 免責聲明：請安全訓示符合IEC 704‐1 要求。研華公司對其內容之準確性不承擔任何法律責任。
CCC
警告使用者：这是甲类资讯产品，在居住的环境中使用，可能会造成射频干扰，在这种情况下，使用
者会被要求采取某些适当的对抗。
声明：此为A级产品，在生活环境中，可能会造成无线干扰，在这种情况下，可能需要用户对其干扰
采取切实可行的措施。
安全指令
1. 请仔细阅读此安全操作说明。
2. 请妥善保存此用户手册供日后参考。
3. 用湿抹布清洗设备前，请从插座拔下电源线。请不要使用液体或去污喷雾剂清洗设备。
4. 对于使用电源线的设备，设备周围必须有容易连接到的电源插座。
5. 请让设备远离潮湿环境。
6. 请在安装前确保设备放置在可靠的平面上，意外跌落可能会导致设备损坏。
7. 设备外壳的开口是用于空气对流，从而防止设备过热。请不要覆盖这些开口。
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 9
8. 当您连接设备到电源插座上前，请确认电源插座的电压是否符合要求。
9. 请将电源线安置在人们不易绊到的位置，并不要在电源在线覆盖任何杂物。
10. 请注意设备上的所有警告和注意标语。
11. 如果长时间不使用设备，请将设备与电源插座间的电线断开，避免设备被超目标电压波动损坏。
12. 请不要让任何液体流入通风口，以免引起火灾或者电路短路。
13. 请不要自行打开设备。为了确保您的安全，请由经过认证的工程师来打开设备。
14. 如遇下列情况，请由专业人员来维修：






电源线或者插头损坏；
设备内部有液体流入；
设备曾暴露在于于潮湿的环境中使用；
设备无法正常工作，或您无法通过用户手册来使其正常工作；
设备跌落或者损坏；
设备有明显的外观破损。
15. 请不要把设备放置在超出我们建议的温度范围的环境，即不要低于0°C(‐20°C;‐4°F) 或高于
40°C(60°C;140°F)，否则可能会损坏设备。
16. 注意：如果电池放置不正确，将有爆炸的危险，因此，只可以使用制造商推荐的同一种或者同等
型号的电池进行替换。请按照制造商的指示处理已使用过的电池。
17. 根据IEC 704‐1:1982 规定，设备产生的音量不高于70 分贝。
18. 免责声明：请安全训示符合IEC 704‐1 要求。研华公司对其内容之准确性不承担任何法律责任。
CE MARK
The CE marking on this product indicates that it is in compliance with the European Union EMC Directive
2014/30/EU, Safety Directive 2014/35/EU.
Le marquage CE sur ce produit indique qu'il est conforme à la Directive européenne sur la compatibilité
électromagnétique 2014/30 / UE, Directive sur la sécurité 2014/35 / UE.
Note! The equipment is operated and maintained only by professionals
Remarque!L'équipement est exploité et entretenu uniquement par des professionnels
Technical Support and Assistance
1. Visit the Advantech web site at www.advantech.com/support where you can find the latest information
about the product.
2. Contact your distributor, sales representative, or Advantech's customer service centre for technical
support if you need additional assistance. Worldwide contact information can be found on
www.advantech.com.Please have the following information ready before you call:
•
•
•
•
Product name and serial number
Description of your peripheral attachments
Description of firmware and software versions installed on the product
A complete description of the problem
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 10
•
The exact wording of any error messages
3. For more information please contact ncg@advantech.com or visit www.advantech.com/nc.
Warranty and RMA
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be free from defects in
materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products which have been repaired or altered by persons other than
repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or
improper installation. Advantech assumes no liability under the terms of this warranty as a consequence of
such events.
Because of Advantech’s high quality‐control standards and rigorous testing, most of our customers never
need to use our repair service. If an Advantech product is defective, it will be repaired or replaced at no
charge during the warranty period. For out of‐warranty repairs, you will be billed according to the cost of
replacement materials, service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU speed, Advantech products
used, other hardware and software used, etc.) Note anything abnormal and list any onscreen messages you
get when the problem occurs.
2. Call your dealer and describe the problem. Please have your manual, product, and any helpful information
readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandise authorization) number from
your dealer. This allows us to process your return more quickly.
4. Carefully pack the defective product, a fully‐completed Repair and Replacement Order Card and a
photocopy proof of purchase date (such as your sales receipt) in a shippable container. A product returned
without proof of the purchase date is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer.
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 11
1. INTRODUCTION
1.1
Overview
FWA‐1012VC is desktop network platform which is powered by Intel® Atom® C3000 Processor Family. The
Intel® Atom® C3000 Processor is integrated with Intel QuickAssist Technologyto increases encrypted packet
throughput.
FWA‐1012VC platform also integrates two 1 GbE FPS ports and six 1GbE RJ45 ports. Two of six RJ45ports are
supported IEEE® 802.3af POE which can power up to two 25.5W PD device. Storage options include one M.2
2280 and one 2.5” SATA device.
FWA‐1012VC total can support 1x 2.4G/5G wireless module and 1x 2G/4G LTE module with dual SIM slots.
Moreover, FWA‐1012VC reserves design for 2nd 2.4G/5G wireless module and 1x 2G/4G LTE module.
For more information related to FWA‐1012VC, please check below link:
http://www.advantech.com/products/6e5d3cbf‐5420‐4e95‐9a4a‐9a51d929623b/fwa‐
1012vc/mod_f0dba999‐ef8c‐45d4‐be05‐fe29cd7662a2
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 12
1.2
System Outlook
1.2.1 FRONT VIEW
There are 8 LED indicators and 4 antenna holds in front of the system:
Figure 1: System Front View
1.2.2 REAR VIEW
There are power switch locates on back of chassis, lockable DC‐In jack, one console port, two USB 3.0
ports, two 1GbE SFP ports, six RJ45 ports, two SIM slots, POE connector and SW defile LED /button
the rear side.
Figure 2: System Rear View
Copyright 2014 Advantech Co. Ltd. All rights reserved.
1.3
System layout
System layout as below picture:
Figure 3: System Architecture
Copyright 2014 Advantech Co. Ltd. All rights reserved.
1.4
Block Diagram
Figure 4: System Block diagram
Copyright 2014 Advantech Co. Ltd. All rights reserved.
1.5
Component Installation
1.5.1 MEMORY/2.5” SSD_HDD/ POE MODULE/ M.2 SSD/ LTE MODULE/WIFI MODULE
This is the drawing of memory location and the stacking of LTE, M.2, POE module, HDD bracket and
SSD/HDD into FWA‐1012VC unit.
Figure 5: main components on the top side
Tighten screw by the instruction on Wifi module in bottom side as below:
Figure 6: wifi module location on the bottom side
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 16
1.5.1.1 TPM/M.2 SSD/LTE module installation
Figure 7: TPM/M.2 SSD/LTE module location
1.5.1.2 2.5” HDD/SSD installation
Figure 8: 2.5” HDD/SSD location
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 17
1.5.1.3 POE module installation
Figure 9: POE module location
1.5.2 RACK MOUNT KITS
1.5.2.1 2 core SKU rack mount kit installation
Figure 10: Rack mount for 2core SKU
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 18
1.5.2.2 4/8 core SKU rack mount kit installation
Figure 11: Rack mount for 4/8 core SKU
1.5.2.3 8 core SKU with POE rack mount kit installation
Figure 12: Rack mount for 8 core SKU with POE
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 19
1.5.3 ANTENNA INSTALLATION
Figure 13: Antenna location instruction
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 20
1.6
Optimum Mounting Environment
1.6.1 SPACE REQUIREMENT
Please always keep 20cm space around platform for better thermal dissipation if not running FWA‐1012VC
on rack.
1.6.2 TEMPERATURE REQUIREMENT
Please make sure environment condition before power on this system:




Operating temperature 0 ~ 35 °C (32 ~ 104 °F) with air flow speed 0.7 m/sec
Non‐operating Temperature ‐20 ~ 80° C (‐4 ~ 167° F)
Relative humidity 95% @ 40° C (non‐condensing)
Storage temperature ‐40 ~ 85° C (‐40 ~ 185° F)
Copyright 2014 Advantech Co. Ltd. All rights reserved.
2. OPERATION
2.1
Powering up/down the platform
To power up the FWA‐1012VC, please press the power switch button.
Before powering down the FWA‐1012VC for any upgrade or maintenance procedures, perform a backup of
critical data and programs.
Press the Power Switch
1. FWA‐1012 is using Power Switch to power ON/OFF system, when user press power switch as ON ( | ),
system will auto power up, , when user press power switch as OFF ( O ), system will force power OFF.
2. Please don’t direct plug or unplug DC Jack when Power Switch sets as ON
Copyright 2014 Advantech Co. Ltd. All rights reserved.
2.2
Booting from network via PXE
To boot an OS via network, please make sure the following BIOS options In the Advanced: Network Stack
Configuration Menu is configured properly:
BIOS item
BIOS item
CSM Parameters ‐> Network
Network Stack
PXE setting
Disabled
Disabled PXE
Enabled
Disabled PXE
Disabled
Disabled PXE
Enabled
Enabled UEFI IPV4 PXE
Disabled
Enabled legacy IPV4 PXE
Enabled
Enabled legacy IPV4 PXE
Do not launch
UEFI
Legacy
Table 1: PXE BIOS Options
Below are the steps to enable PXE boot.
1. When user sets “ BIOS/ Advanced‐> CSM Parameters ‐> Network” as Legacy to enable PXE ROM function,
set it as “Legacy” (IPV4 PXE) function .
Copyright 2014 Advantech Co. Ltd. All rights reserved.
2. When user sets BIOS/ Advanced‐> Network Stack Configuration‐> Network Stack as enabled (default
setting is disabled) , It will open UEFI IPV4 PXE support function.
3. Save BIOS and reboot system. The BIOS will show “Checking Media Presence......”, if system is not
connected PXE server, it will show “No Media Present......”
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 24
4. User may re‐login in BIOS, choose BIOS/ boot item, it will has “Network Device BBS Priorities” item and set
Legacy IPV4 PXE LAN boot sequence priority.
And please choose PXE Boot priority as “IBA GE Slot 0A00 v1570” it is on board Mgmt GbE port.
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 25
When User sets “CSM Parameters ‐> Network” as UEFI and “Network Stack” as Enabled, the PXE choosing
item is list in “Boot Option Priorities”, please choose Boot Option to set sequence priority of UEFI IPV4 PXE
LAN port
When UEFI IPV4 PXE doesn’t detect UEFI PXE server, it will return to BIOS manual.
PXE boot usually does not allow for OS installation over network as the PXE client will only load a single file
from the boot server. Similarly, booting Linux over network is usually a two stage process. In the first step, a
boot loader such a grub or mini OS such as SysLinux are loaded via PXE from the boot server. The boot loader
or miniOS then load the actual target OS which usually consists of multiple files which decompressed and
installed into a RAM disk. The detailed process and required configuration of such network install will heavily
depend on the target OS and boot loader / miniOS used. Please refer to the related documentation
available.
PXE boot requires a DHCP server and a TFTP server in the network to complete. DHCP Server and TFTP server
are commonly run on the same machine and collectively referred to as “boot server”. Setting up such a boot
server implies a couple of steps. How‐to guides for setting up Linux as PXE boot server are available on the
internet, e.g.
https://www.debianadministration.org/article/478/Setting_up_a_server_for_PXE_network_booting.
Please note that it is recommended to setup a separate network / subnet for network booting as
the DHCP required for PXE booting may conflict with existing DHCP servers in your network.
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 26
2.3
LED Behaviour
2.3.1 FOR THE DESCRIPTION OF LAN
2.3.2
PORT LEDS
SFP LED INDICATOR FUNCTION IN FRONT:
Figure :SFP connector drawing
SFP LED
LEFT
RIGHT
SFP1
SPEED: 1G Green
LINK/ACK LINK: Green ACK:
Green Blinking
SFP2
SPEED: 1G Green
LINK/ACK LINK: Green ACK:
Green Blinking
Table 2: SFP connector LED indication
2.3.3 RJ45 LED INDICATOR FUNCTION IN FRONT:
RJ45 LED
LEFT
RIGHT
SPEED:10M LED OFF
100M Amber,1G
Green
LINK/ACK LINK: Green ACK:
Green Blinking
SPEED: 10M LED OFF
100M Amber,1G
Green
LINK/ACK LINK: Green ACK:
Green Blinking
Table 3: RJ45 connector LED indication (Marvell PHY)
Copyright 2014 Advantech Co. Ltd. All rights reserved.
2.3.4 RJ45 LED INDICATOR FUNCTION W/ POE IN FRONT:
RJ45 LED
LEFT
RIGHT
SPEED:10M LED OFF
100M Amber,1G
Green
LINK/ACK/SPEED LINK:
1G/Green,100M/Amber ACK:
Blinking
SPEED: 10M LED OFF
100M Amber,1G
Green
LINK/ACK LINK: Green ACK:
Green Blinking
Table 4: RJ45 connector LED indication (Marvell PHY) without POE
RJ45 LED
LEFT
RIGHT
POE LED ON: GREEN
LINK/ACK/SPEED LINK:
1G/Green,100M/Amber ACK:
Blinking
POE LED ON: GREEN
LINK/ACK/SPEED LINK:
1G/Green,100M/Amber ACK:
Blinking
Table 5: RJ45 connector LED indication (Marvell PHY) with POE
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 28
2.4
Main Board Connector placement
Top side:
Figure 14: NAMB‐1012VCMB Connector placement (Top side)
Bottom Side:
Figure 15: NAMB‐1012VCMB Connector placement (Bottom side)
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 29
FWA‐1012VC MB Jumper Setting and Connector List
Location
Description
CN89
12V SWITCH CONN
CN91
12V Power Connector
BH1
Battery holder for coin battery
CLS_CMOS1
Clear CMOS pin header
CLS_CMOS2
Clear RTC pin header
CN5
LPC Connector
CN8
4‐PIN SATA POWER Connector
CN11
RJ45+USBx2 Connector
CN12
USB HEADER. 10‐Pin wafer connector for USB
2.0
CN95
COM2 UART CONN
CN30
6‐Pin pin header for FPGA JTAG
CN13
UART COM2 Connector. 10‐Pin wafer connector
for COM2
FAN1,FAN2
4‐Pin fan connector
SATA1
SATA IO connectors from Denverton
SPI1
SPI socket for SPI flash (BIOS)
SW2
SW Button
CN77
SFP CONN
CN78,CN80
RJ45 CONN
CN84
RJ45(POE)CONN
CN85
POE POWER CONN
CN1 CN88
SIM CARD CONN
CN37 CN38
BSCN CONN
CN86
POE CONN
CN_MINI1 CN_MINI2
MINIPICE CONN
CN87
M.2 CONN (B+M KEY 3042 &2280)
CN71
M.2 CONN (B+M KEY 3042 &2242)
SW3
FPGA switch
SW1
BSCN switch
CN96
BSCN jumper
Comment
Table 6: FWA‐1012VC MB Jumper Setting and Connector List
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 30
3. BIOS
FWA‐1012VC BIOS is based on AMI’s APTIO BIOS and compliant to the UEFI, SMBIOS and ACPI specifications.
The BIOS performs probing, initialization and configuration of the FWA‐1012VC and initializes the OS boot
process at the end of POST (Power‐On‐Self‐Test).
Regular BIOS output as well as the setup menu are displayed via console port and please note that the FWA‐
1012VC does not have any on‐board POST Code LEDs. A special POST code adapter is required to retrieve
BIOS error codes.
All BIOS configuration parameters bare stored in NVRAM, a dedicated section of the BIOS flash chip.
Parameters are no longer stored in legacy CMOS RAM by the platform BIOS. I.e. BIOS configuration
parameters will not be lost due to an empty battery.
3.1
BIOS Defaults
The BIOS comes with a set of configuration parameters when shipped by Advantech referred to as
“Optimized Defaults” or “factory defaults”. The user can change BIOS settings via the setup menu either
temporarily or permanently by saving the changes as “User defaults”.
The BIOS loads Optimized Defaults by the option “Restore Defaults; and loads User defaults by the option
“Restore User Defaults”. If no User defaults have been defined, the BIOS will do nothing.
3.2
BIOS Setup Menu
This section describes the FWA‐1012VC’s UEFI BIOS based on AMI’s APTIO BIOS.
Users can modify BIOS settings and control the special features of the FWA‐1012VC using the BIOS setup
menu.
Please note that Advantech supports shipping the FWA‐1012VC with custom BIOS defaults to simplify the
deployment and integration for our customers. Please contact your Advantech representative if you want to
receive more information regarding this service.
The BIOS Setup Menu can be entered via the BIOS POST screen displayed on the console interface:
Figure 15: BIOS POST screen (example)
BIOS Setup can be entered by hitting  or  keys during POST.
The BIOS setup menu screens have a few main elements as shown below. The menu bar displays the
selectable menu pages as tabs. The parameter window displays and allows configuration of the settings
available in a given menu page or a submenu thereof. Auxiliary text providing information about the
selected setup item is displayed in the top right corner.
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 31
Figure 16: BIOS Setup Screen Organization
3.2.1 MAIN SETUP MENU
If security protection has been enabled previously (see chapter 錯誤! 找不到參照來源。), you will be
prompted for the BIOS password upon entering the BIOS Setup. After a successful check or if password
protection has not been enabled, users will see the Main Setup screen shown below. Users can always
return to the Main setup screen by selecting the Main tab.
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 32
Figure17: BIOS Setup Main screen
The main setup page displays system a summary of system and BIOS configuration and status information.
The fields on this page are read‐only except for the System Date and Time setting.
Group
Setup item
Access / Options
Description
BIOS Vendor
Display only
American Megatrends
Core Version
Display only
Current AMI BIOS core version in use
Compliancy
Display only
UEFI Spec revision that the BIOS complies to
Advantech BIOS Version info
BIOS
Information
Project Version
Display only
EX: mmmm Vx.yz
mmmm : model name
X : major version
Yz: minor version
Build Date & Time
System
Language
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Display only
Shows BIOS build date and time
Display only
Selects the Setup Menu Language. Only English
is supported on the FWA‐1012VC.
Page 33
System Date
MM/DD/YY
Displays and sets the system date as used by
the BIOS
System Time
HH:MM:SS
Displays and sets the system time as used by
the BIOS
Display only
Access Level
Shows the user privilege level according to the
security settings. If password protection has
not been enabled, this will default to
“Administrator”
Table76: BIOS Setup: Main Menu
3.2.1.1 Setting System Time and Date
Use this option to change the system time and date. Highlight System Time or System Date using the
 keys. Enter new values through the keyboard. Press the  key or the  keys to move
between fields. The date must be entered in MM/DD/YY format. The time is entered in HH:MM:SS format.
Please not that system time and date are set during manufacturing process according to factory’s local time
zone. You may need to update system time to reflect the desired time zone when you receive the unit.
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 34
3.2.2 PLATFORM SETUP MENU
Select the Platform tab from the FWA‐1012VC setup screen to enter the Platform Setup screen. Users can
select any of the items in the left frame of the screen, such as the Trusted Computing Configuration, to go to
the sub menu for that item. Users can display a Platform BIOS Setup option by highlighting it using the
 keys. The Platform BIOS Setup screen is shown below. The sub menus are described on the
following pages. Note: If BMC is Present in the system and Hardware Monitor page will be hidden.
Figure 18: Platform Setup Main screen
3.2.2.1 Serial Console
This sub menu allows you to change the settings used for the serial console.
Note that the serial console is always using COM1 which is connected to the front panel.
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 35
Figure 19: Platform Setup: Console Redirection Menu
The settings for COM0 console can be accessed in this menu.
This sub menu allows you to change the settings used for the serial console. For example, users can define
the terminal type, bits per second, data bits, parity, stop bits and others.
Setup item
Console Redirection
Access / Options
Disabled /
Enabled
Description
Disabled / Enabled Console Redirection
Serial Console Port
COM0
Serial Console
Speed
9600 / 19200 /
38400 / 57600 /
115200
Data Bits
7/8
Defines number of data bits in a character.
Stop Bits
1/2
Defines number of stop bits in a character.
Parity
None / Even / Odd
/ Mark / Space
Defines the parity scheme used.
Flow Control
None / Xon/Xoff
Defines the flow control scheme.
Terminal Type
ANSI / VT100 /
VT100+ /
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Serial Console Port
Defines the baud rate.
Select the target terminal emulation type:‐ ANSI to use the
Extended ASCII Character Set.
Page 36
VT‐UTF8
‐ VT100 to use the ASCII Character set.
‐ VT100+ to add color and function key support.
‐ VT‐UTF8 to use UTF8 encoding to map Unicode
characters into one or more bytes.
VT‐UF8 Combo Key
Recorder Mode
Resolution 100x31
Disabled /
Enabled
Disabled /
Enabled
Disabled /
Enabled
80x24 /
Resolution
80x 25
PuTTY Keypad
VT100 /. LINUX /
XTERMR6 / SCO /
ESCN / VT400
Redirection after
POST
Always Enable /
BootLoader
Emergency
Management
Services (EMS)
Disabled /
Enables VT‐UTF8 Combination Key Support for ANSI / VT100
terminals
When Enabled the data displayed on a terminal will be captured
and sent as text messages to a remote server.
Enables or disables extended terminal resolution
When using Legacy OS, this item specifies the Number of Rows
and Columns supported
Select Function Key and Key Pad Emulation on PuTTY.
This defines how long console redirection will be active:
Enabled
“BootLoader” means that legacy console redirection is disabled
before booting into a Legacy OS. “Always Enable” means Legacy
console Redirection is enabled permanently.
Disabled / Enabled serial console interface to the bootloader
menu on modern versions of Microsoft Windows
Console Redirection
Table 8: Platform Setup: COM0 Console Redirection Menu Items
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 37
3.2.2.2 USB Configuration
This sub menu allows you to change the settings used for USB and to get an overview of the USB devices
detected by the BIOS.
Figure 20: Platform Setup: USB Configuration Menu
Setup item
Access / Options
Description
USB Support
Enabled
Enables or disables the support for USB. If
disabled, the USB EHCI controller will not be
initialized by the BIOS.
Disabled
Legacy USB Support
Auto
Enabled
Disabled
EHCI Hand‐Off
Enabled
Disabled
Port 60/64
Emulation
Enabled
Disabled
Enables legacy support over USB to support
Keyboard and Mouse
Controls the hand off of XHCI ownership from
BIOS to OS at boot time.
Enables I/O port 60h/64h emulation
support
Table 9: USB Configuration Menu
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 38
3.2.2.3 Trusted Computing
Please note that Trusted Computing support is disabled by default in the factory defaults to save system
boot time. If disabled, the Trusted Computing Menu will not display any status information.
Figure 21: Platform Setup: Trusted Computing
Group
Setup item
Access / Options
Security Device Sup
Configuration
Enable
Disable
Description
Enables or Disables BIOS support for security
device. O.S. will not show Security Device. TCG
EFI protocol and INT1A interface will not be
available.
Table 10: Trusted Computing Menu
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 39
3.2.2.4 NCT7904D HW Monitor
The system with NCT7904D HW Monitor , and the BIOS will detect voltages and temperatures and the
related information will be shown in the BIOS setup menu as below.
Figure 22: Platform Setup: Trusted Computing with TPM2.0
3.2.2.5 Virtualization
This sub menu allows you to change the settings used for Virtualization function.
Intel® Virtualization Technology for Directed I/O (VT‐d). Thus, BIOS handle virtual functions exposed by PCIe
devices in case SR‐IOV is supported, otherwise PCIe devices will be assigned to virtual machines in pass‐
through mode. This applies for all PCIe devices.
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 40
Figure 23: Platform Setup: Virtualization
Setup item
Access / Options
Description
Intel Virtualization
Enable
Enable/Disable Intel Virtualization Technology ,
take effect after reboot
Disable
VT‐d
Enable
Disable
SR‐IOV Support
Enable
Disable
Enable/disable Intel Virtualization Technology
for Directed I/O (VT‐d) by reporting the I/O
device
If system has SR‐IOV capable PCIe Devices, this
option Enables or Disables Single Root IO
Virtualization Support
Table 11: Virtualization Menu
3.2.2.6 Platform Management
This sub menu allows you to change the settings used for related CPU utilization setting.
The default configuration for CPU was optimized setting for getting better performance for networking, so it
is not recommend to change it.
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 41
Figure 24: Platform Setup: Platform Management
Setup item
Access / Options
EIST
Enable
Disable
Max Core C‐State
Package C State
limit
Description
Enable or disable BIOS support for Enhanced
Intel SpeedStep Technology, When enabled, OS
sets CPU frequency according load. When
disabled, CPU frequency is set at max non‐
turbo.
C1, C6
Enable/Disable CPU C6(ACPI C2) report to OS
Recommended to be enabled.
No Pkg C‐State, No
S0Ix, No limit
Package C State limit. The "waking‐up time"
will be longer if Package C state limit setting is
deep C state support.
Table 12: Platform Management Menu
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 42
3.2.3 HARDWARE SETUP MENU
This sub menu allows you to change the settings of the Intel chipset. Please note that “chipset” is a legacy
term and the related functionality is split over the CPU and PCH portions of the SoC. Similarly, the terms
“South Bridge” and “North Bridge” are legacy terms and do not represent the silicon implementation any
more. However, those terms are kept consistent with previous products to allow users to navigate more
easily.
The sub menus are described on the following pages.
Figure 25: Hardware Configuration Menu
3.2.3.1 Hardware Setup: CPU Configuration
This menu use example of Atom C3000 CPU configuration.
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 43
Figure 26: Chipset: Processor Configuration Menu
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 44
Group
Setup item
Access / Options
Description
Display only
Displays information on the processor installed
Enabled, Disabled
Link
Some legacy operating systems are unable to
properly deal with the CPUID x86 opcode when
called using operands greater than 3, Set this
to Enabled if you experience just such a
problem, otherwise leave this Disabled.
CPU signature
Microcode Patch
CPU Frequency
Socket0 CPU
information
Processor Cores
Intel VT‐x
Technology
L1 code Cache
L2 Cache
None
Limit CPUID
Maximum
Table 13: Processor Configuration Menu
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 45
3.2.3.2 Hardware Setup: North Bridge Configuration
This menu allows the configuration of the memory controller and related features of the SoC.
Figure 27: NorthBridge Configuration Menu
Group
Setup item
Access / Options
Description
Node 0 Ch 0 Dimm
Display only
Displays information on the DIMM installed
Node 0 Ch 1 Dimm
DIMM
Information
Patrol Scrub Enable
Demand Scrub
Enable
Scrambling
Enable
Disable
Enable
Disable
Enable
Disable
Select to enable / disable Patrol Scrub Support
Select to enable / disable Demand Scrub
Support
Select to enable / disable the Scrambler
Table 14: Northbridge Configuration Menu
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 46
3.2.3.3 Hardware Setup: South Bridge Configuration
This menu contains settings for the South Bridge for related SATA and USB and ACPI setting etc.
Figure 28: Hardware Setup: South Bridge configuration
Setup item
Access / Options
Description
SATA Configuration
N/A
Select sub‐menu.
ACPI Settings
N/A
Select sub‐menu.
Table 15: Hardware Setup: South Bridge configuration Menu Items
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 47
3.2.3.3.1
South Bridge Configuration: SATA Configuration
Figure 29: Hardware Setup: SATA configuration
Setup item
Access /
Options
SATA Port 0
Display only
SATA Port 1
Display only
SATA Port 2
Display only
SATA Controller
Enabled
Disabled
Description
Show current SATA devices in use on the
FWA‐1012VC
To enable the SATA controller
Table 16: Hardware Setup: SATA configuration Menu Items
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 48
3.2.3.4 ACPI Setting
This menu contains settings for the ACPI configuration.
Figure 30: Hardware Setup: ACPI configuration
Setup item
Access / Options
Enable ACPI Auto
Configuration
Enabled
Lock Legacy
Resources
Enabled
Disabled
Disabled
Description
Enable or disable BIOS ACPI auto configuration
Enable lock of legacy resources
Table 17: Hardware Setup: ACPI configuration Menu Items
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 49
3.2.4 SETUP POST & BOOT MENU
Users can configure the system boot priority settings via the boot page. The default setting of boot priority
of boot option #1 is “UEFI: Built‐in EFI Shell”; Users can define the boot priorities based on the application.
Figure 31: Boot Configuration
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 50
Feature
Default
Setup Prompt Timeout
Bootup NumLock State
On
Description
Number of seconds to wait for setup activation key.
Select the keyboard NumLock state.
Quiet Boot
Disabled
Enables or disables Quiet Boot option.
Network Stack
Disabled
Enables or disables boot via Network (PXE)
Boot Option Priority
User Defined
Sets the system boot order.
CSM16 Parameters
N/A
Select sub‐menu.
CSM Parameters
N/A
Select sub‐menu.
Table 18: Boot Configuration
3.2.4.1 Compatibility Support Module (CSM) Configuration
This submenu allows users to configure the support for legacy BIOS mechanisms and option ROMs.
Figure 32: Post & Boot Setup: CSM Configuration Menu
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 51
Setup item
Access / Options
CSM Support
Enabled
Disabled
Boot option filter
Description
Enables or disables the Compatibility Support
Module.
UEFI and Legacy
Legacy Only
This item allows to control the execution of
legacy and UEFI compliant Option ROMs
UEFI Only
Network
Storage
Video
Do not launch
UEFI
Legacy
This item allows a more granular control of
OptionROM execution depending of the type of
extension device.
Other PCI device
ROM
Table 19: CSM Configuration Menu
3.2.4.2 CSM16 Configuration
This submenu allows users to configure the support for legacy BIOS CSM16
Figure 33: CSM16 Configuration
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 52
Setup item
GateA20 Active
Access / Options
Upon Request
Always
Option ROM
Messages
Force BIOS
Keep Current
Description
UPON REQUEST ‐ GA20 can be disabled using
BIOS services. ALWAYS ‐ do not allow disabling
GA20; this option is useful when any RT code is
executed above 1MB
Set display mode for Option ROM
Table 20: CSM16 Configuration Menu
3.2.4.3 Security Setup
“Administrator Password” allows users to configure the system so that a password after being installed is
required each time the system boots, and/or an attempt is made to enter the Setup program.
Figure 34: Administrator Setup
Note:
 If set the “Password Check” is [Setup], then this only limits access to Setup and is only asked for when entering
Setup.
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 53


If set the “Password Check” is [Always], then this is a power on password and must be entered to boot or enter
Setup. In Setup the User will have Administrator rights.
The password length must be in the following range:

Minimum length: 3

Maximum length: 20
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 54
3.2.5 SAVE & EXIT MENU
The FWA‐1012VC BIOS allows users to store BIOS configuration results as “User Defaults.” Users can select
“Save as User Defaults” to record all changes which had been made in previous pages as the default setting
for further use.
Figure 35: Save & Exit Menu
Group
Setup item
Description
Save Changes and
Exit
Exit setup after saving the changes. Does not update User
defaults.
Discard Changes and
Exit
Exit setup without saving any changes.
Save Changes and
Reset
Reset system after saving the changes. Does not update User
Defaults.
Discard Changes and
Reset
Reset system without saving the changes.
Save Changes
Save Changes made so far to any of the setup options.
Discard Changes
Discard Changes made so far to any of the setup options.
Restore Defaults
Restores the BIOS factory defaults to all the setup options.
None
Save Options
Copyright 2014 Advantech Co. Ltd. All rights reserved.
Boot Override
Save as User Defaults
Saves the Current BIOS Settings as User Defaults.
Restore User Defaults
Restores the User defaults to all the setup options.
UEFI: < boot device>
This option allows you to override the specified boot order and
use a different boot device for the next boot.
Table 21: Save & Exit Menu Options
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 56
APPENDIX A: ACKNOWLEDGEMENTS
Award is a trademark of Award Software International, Inc.
IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Corporation. Intel® and
Pentium® are trademarks of Intel Corporation.
Microsoft Windows® is a registered trademark of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 57
APPENDIX B: GLOSSARY
Terminology
Description
ACPI
Advanced Configuration and Power Interface specification
AHCI
Advanced Host Controller Interface.
APIC
Advanced Programmable Interrupt Controller.
ASF
Alert Standard Format.
BGA
Ball Grid Array
BIST
Built‐in self test
BMC
Base Board Management Controller
BSCAN
Boundary Scan Connector
BSP
Boot Strap Processor
DDR3
Third generation Double Data Rate SDRAM memory technology.
DMA
Direct Memory Access.
DMI
Direct Media Interface.
DMTF
The international organization responsible for managing and maintaining the
ASF specification.
DTS
Digital Thermal Sensor
ECC
Error Correcting Code
EEPROM
Electrically Erasable Programmable Memory. A non‐volatile memory located on
the LAN controller that is directly accessible from the host
EHCI
Enhanced Host Controller Interface.
EMI
Electromagnetic Interface
ESD
Electrostatic Discharge
GB/s
Gigabytes per second(1000Mbytes per second)
Gb/s
Gigabits per second(1000Mbits per second)
GT/s
Giga‐transfers per second
I2C
Inter‐integrated circuit
IEEE
Institute of Electrical and Electronics Engineers.
IIO
Integrated I/O Controller.
ILM
Independent Loading Mechanism.
IMC
Integrated Memory Controller.
IOV
I/O virtualization.
IPMB
Intelligent Platform Management Bus
IPMI
Intelligent Platform Management Interface
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 58
JTAG
Joint Test Action Group
LAN
Local Area Network
LPC
Low Pin Count
MAC
Media Access Control
MDIO
Management Data Input / Output Interface over MDC/MDIO lines
MTBF
Mean Time Between Failure
NC‐SI
Network Controller Sideband Interface
NMC
Network Mezzanine Card
PCI
Peripheral Component Interconnect Local Bus
PCIe
PCI Express.
PCH
Platform Controller Hub
PECI
Platform Environment Control Interface.
PET
Platform Event Trap.
PHY
Physical Layer Device
PICMG
PCI Industrial Computer Manufacturers Group
QPI
Quick Path Interconnect. A cache‐coherent, link‐based interconnect
specification for Intel Processors, chipsets, and I/O bridge.
RAID
Redundant Array of Inexpensive Disks or Redundant Array of Independent Disks
RANK
A unit of DRAM corresponds to four to eight devices in parallel, ignoring ECC.
These devices are usually, but not always, mounted on a single side of a DDR3
DIMM.
RDIMM
Registered dual In‐line Memory Module.
RGMII
Reduced gigabit media independent interface
RTC
Real Time Clock
Sandy Bridge‐EP
Intel’s 32‐nm processor design, follow‐on to the 32‐nm Sandy Bridge processor
design.
Processor
SATA
Serial ATA.
SAS
Serial Attached SCSI
SCI
System Control Interrupt. Used in ACPI protocol.
SDRAM
Synchronous Dynamic Random Access Memory
SerDes
Serializer and De‐Serializer Circuit
SGMII
Serialized Gigabit Media Independent Interface
SIU
Serial I/O Unit
SIW
Serial I/O and Watchdog Timer
SKU
Stock Keeping Unit
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 59
SMBus
System Management Bus. A two‐wire interface through which various system
components may communicate.
SPD
Serial Presence Detect
SPI
Serial Peripheral Interface.
TAC
Thermal Averaging Constant
TBD
To Be Defined.
TDP
Thermal Design Power
TPM
Trusted Platform Module
Turbo Boost
Technology
Intel Turbo Boost Technology is a way to run the processor core faster than the
marked frequency.
UART
Universal Asynchronous Receiver/Transmitter
UHCI
Universal Host Controller Interface
USB
Universal Serial Bus
USB DOM
USB disk‐on‐module
QAT
Intel® QuickAssist Technology
Copyright 2017 Advantech Co. Ltd. All rights reserved.
Page 60
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : vanessa
Create Date                     : 2018:10:23 17:40:03+08:00
Modify Date                     : 2018:10:23 17:40:03+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : vanessa
Title                           : Microsoft Word - User Manual  FWA-1012VC_v1.1
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:8cecb350-18cc-4650-abeb-76ab9b87c28f
Instance ID                     : uuid:ee552496-5630-459a-b6e1-a368d3b55f19
Page Count                      : 60
EXIF Metadata provided by EXIF.tools
FCC ID Filing: M82-FWA1012VC

Navigation menu