Advantech Co WISE-2200B Bluetooth 4.1 low energy Asset Tag User Manual MFP Print Server Quick Installation Guide

Advantech Co Ltd Bluetooth 4.1 low energy Asset Tag MFP Print Server Quick Installation Guide

User manual

WISE-2200B-User Manual PRODUCT INTRODUCTION Package Contents Before you start using this product, please check if there is anything missing in the package and contact your dealer to claim the missing item(s):  WISE-2200B : Bluetooth® 4.1 low energy Asset Tag  CR2450 Battery  User Manual LED & Button Definitions Front Panel
1 LEDs Color Status Description Power Status Blue ON Power charging OFF Power off Red ON Low Power Active Status Blue BLINK Data Broadcasting Red BLINK Data Broadcasting with low power Call Button Blue BLINK 1. Reset: Resets device to factory defaults (to reset to factory defaults, push the button for more than 10 seconds, LED will blink 5 times) 2. Emergency alerting: Press the button and let go after 1 second to enable alert function, LED will blink 3 times) Red BLINK Rear Panel Items Description Tamper Switch Security and theft prevention, triggering an immediate alert
2 Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause interference and2) this device must accept any interference, including interference that may cause undesired operation of thedevice. RF Radiation Exposure Statement: 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.

Navigation menu