Aeon Labs DSD37 Z-Wave Network Repeater User Manual Repeater
Aeon Labs LLC. Z-Wave Network Repeater Repeater
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1817413 |
| Application ID | oPsOOFLLGR6cJLfJOfYiIQ== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 14.25kB (178157 bits) |
| Date Submitted | 2012-10-17 00:00:00 |
| Date Available | 2012-10-17 00:00:00 |
| Creation Date | 2012-09-26 15:16:53 |
| Producing Software | Adobe Acrobat Pro 9.0.0 |
| Document Lastmod | 2012-09-26 15:18:32 |
| Document Title | Repeater |
| Document Creator | Adobe Acrobat Pro 9.0.0 |
| Document Author: | Administrator |
Repeater Guide Contents 1. Aeotec Repeater 2. Familiarise yourself with your Repeater 3. Quick Start If you’re using a Z-Stick If you’re using a Minimote 4. Advanced Functions If you’re using a Z-Stick If you’re using a Minimote 5. Warranty 1 Aeotec Repeater Aeotec Repeater can be used as a Z-Wave network repeater. 2 Familiarise yourself with your repeater Placed Repeater to the right position, it can work well. Product use Instruction Fixing holes Switch Outlet Repeater -1- 3 Quick Start Getting your Aeotec Repeater up and running is as simple as plugging it into a wall outlet and linking it to your existing Z-Wave network. The following instructions tell you how to link your Repeater to your Z-Wave network using Aeotec's Z-Stick or Minimote controllers. If you are using other products as your main Z-Wave controller, please refer to the part of their respective manuals that tells you how add new devices to your network. If you’re using a Z-Stick: 1. D e c i d e o n w h e r e y o u w a n t y o u r Repeater to be placed and plug it in. Its main light will begin to blink. 2. If your Z-Stick is plugged into a gateway or a computer, unplug it. 3. Take your Z-Stick to your Repeater 4. Press the Action Button on your Z-Stick. 5. P r e s s t h e A c t i o n B u t t o n o n y o u r Repeater. has been 6. I f y o u r R e p e a t e r successfully linked to your network, its light will no longer blink. If the linking was unsuccessful the light will continue to blink. 7. Press the Action Button on the Z-Stick to take it it out of installation mode. -2- If you’re using a Minimote: 1. Decide on where you want your Repeater to be placed and plug it in. Its main light will begin to blink. 2. Take your Minimote to your Repeater. 3. Press the Include on your Minimote. 4. Press the Action Button on your Repeater. 5. If your Repeater has been successfully linked to your network, its light will no longer blink. If the linking was unsuccessful the light will continue to blink. 6. Press any button on your Minimote to take it it out of installation mode. Include Now that your Repeater is up and running . -3- 4 Advanced Functions Removing your Repeater from a Z-Wave network Your Repeater can be removed from your Z-Wave network at any time. You'll need to use your Z-Wave network's main controller to do this. The following instructions tell you how to do this using Aeotec's Z-Stick and Minimote controllers. If you are using other products as your main Z-Wave controller, please refer to the part of their respective manuals that tells you how remove devices from your network. If you’re using a Z-Stick: 1. If your Z-Stick is plugged into a gateway or a computer, unplug it. 2. Take your Z-Stick to your Repeater. 3. Press the Action Button on your ZStick. 4. Press the Action Button on your Repeater. 5. If your Repeater has been successfully removed from your network, its light will blink. If the removal was unsuccessful its light will not blink. 6. Press the Action Button on the Z-Stick to take it it out of removal mode. -4- If you’re using a Minimote: 1. Take your Minimote to your Repeater. 2. Press the Remove Button on your Minimote. 3. Press the Action Button on your Repeater. 4. If your Repeater has been successfully removed from your network, its light will blink. If the removal was unsuccessful its light will not blink. 5. Press any button on your Minimote to take it it out of removal mode. Remove -5- 5 Warranty Aeon Labs warrants to the original purchaser of Products that for the Warranty Period (as defined below), the Products will be free from material defects in materials and workmanship. The foregoing warranty is subject to the proper installation, operation and maintenance of the Products in accordance with installation instructions and the operating manual supplied to Customer. Warranty claims must be made by Customer in writing within thirty (30) days of the manifestation of a problem. Aeon Labs' sole obligation under the foregoing warranty is, at Aeon Labs' option, to repair, replace or correct any such defect that was present at the time of delivery, or to remove the Products and to refund the purchase price to Customer. The "Warranty Period" begins on the date the Products is delivered and continues for 12 months. Any repairs under this warranty must be conducted by an authorized Aeon Labs service representative and under Aeon Labs’RMA policy. Any repairs conducted by unauthorized persons shall void this warranty. Excluded from the warranty are problems due to accidents, acts of God, civil or military authority, civil disturbance, war, strikes, fires, other catastrophes, misuse, misapplication, storage damage, negligence, electrical power problems, or modification to the Products or its components. -6- Aeon Labs does not authorize any person or party to assume or create for it any other obligation or liability in connection with the Products except as set forth herein. Aeon Labs will pass on to Customer all manufacturers’ Material warranties to the extent that they are transferable, but will not independently warrant any Material. Customer must prepay shipping and transportation charges for returned Products, and insure the shipment or accept the risk of loss or damage during such shipment and transportation. Aeon Labs will ship the repaired or replacement products to Customer freight prepaid. Customer shall indemnify, defend, and hold Aeon Labs and Aeon Labs’ affiliates, shareholders, directors, officers, employees, contractors, agents and other representatives harmless from all demands, claims, actions, causes of action, proceedings, suits, assessments, losses, damages, liabilities, settlements, judgments, fines, penalties, interest, costs and expenses (including fees and disbursements of counsel) of every kind (I) based upon personal injury or death or injury to property to the extent any of the foregoing is proximately caused either by a defective product (including strict liability in tort) or by the negligent or willful acts or omissions of Customer or its officers, employees, subcontractors or agents, and/or (ii) arising from or relating to any actual or alleged infringement or -7- misappropriation of any patent, trademark, mask work, copyright, trade secret or any actual or alleged violation of any other intellectual property rights arising from or in connection with the products, except to the extent that such infringement exists as a result of Aeon Labs’ manufacturing processes. IN NO EVENT SHALL AEON LABS BE LIABLE FOR ANY INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES, OR DAMAGES FOR LOSS OF PROFITS, REVENUE, OR USE INCURRED BY CUSTOMER OR ANY THIRD PARTY, WHETHER IN AN ACTION IN CONTRACT, OR TORT, OR OTHERWISE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. AEON LABS’ LIABILITY AND CUSTOMER’ S EXCLUSIVE REMEDY FOR ANY CAUSE OF ACTION ARISING IN CONNECTION WITH THIS AGREEMENT OR THE SALE OR USE OF THE PRODUCTS, WHETHER BASED ON NEGLIGENCE, STRICT LIABILITY, BREACH OF WARRANTY, BREACH OF AGREEMENT, OR EQUITABLE PRINCIPLES, IS EXPRESSLY LIMITED TO, AT AEON LABS’ OPTION, REPLACEMENT OF, OR REPAYMENT OF THE PURCHASE PRICE FOR THAT PORTION OF PRODUCTS WITH RESPECT TO WHICH DAMAGES ARE CLAIMED. ALL CLAIMS OF ANY KIND ARISING IN CONNECTION WITH THIS AGREEMENT OR THE SALE OR USE OF PRODUCTS SHALL BE DEEMED WAIVED UNLESS MADE IN WRITING WITHIN THIRTY (30) DAYS FROM AEON LABS’ S DELIVERY, OR THE DATE FIXED FOR DELIVERY IN THE EVENT OF NONDELIVERY. -8- THE INDEMNITY AND WARRANTY IN ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER INDEMNITIES OR WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. FCC NOTICE (for USA): THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. -9- However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning: Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. - 10 - Certifications (regional): www.aeon-labs.com Version:14A0010038-AA www.aeotec.com - 11 - FCC STATEMENT This device complies with Part 1515 of of thethe FCC Rules. Operation is subject to to thethe following two 1. This device complies with Part FCC Rules. Operation is subject following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Administrator Create Date : 2012:09:26 15:16:53+08:00 Modify Date : 2012:09:26 15:18:32+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2012:09:26 15:18:32+08:00 Creator Tool : Adobe Acrobat Pro 9.0.0 Format : application/pdf Title : Repeater Creator : Administrator Document ID : uuid:63c2b38f-2240-41cb-893a-6a332d5de315 Instance ID : uuid:70eb74f6-3380-4566-a3ea-9c872e29d6aa Producer : Adobe Acrobat Pro 9.0.0 Page Count : 14EXIF Metadata provided by EXIF.tools