AeroScout EX5210 Exciter - EX5210, EX5210R User Manual EX5210R Exciter Installation Configuration Guide

AeroScout Exciter - EX5210, EX5210R EX5210R Exciter Installation Configuration Guide

User Manual

     EX5210R RUGGED EXCITER INSTALLATION & CONFIGURATION GUIDE DRAFT 1: Updated 2018/10/10
  Disclaimer The information and know-how included in this document are the exclusive property of STANLEY Healthcare and are intended for the use of the addressee or the user alone. The addressees shall not forward to another their right of using the information, know-how or document forwarded herewith, in whole or in part in all matters relating or stemming from or involved therein, whether for consideration or without consideration, and shall not permit any third party to utilize the information, know-how or the documents forwarded herewith or copies or duplicates thereof, unless at the company’s consent in advance and in writing. Any distribution, advertisement, copying or duplication in any form whatsoever is absolutely prohibited. The Company reserves the right to sue the addressee, user and/or any one on their behalves, as well as third parties, in respect to breaching its rights pertaining to the intellectual rights in particular and its rights of whatever kind or type in the information, know-how or the documents forwarded by them herewith in general, whether by act or by omission. This document is confidential and proprietary to STANLEY Healthcare and is not to be distributed to any persons other than licensed AeroScout Visibility System users or other persons appointed in writing by STANLEY Healthcare. Trademark Acknowledgements AeroScout is a trademark of Stanley Black & Decker, Inc. or its affiliates. Other brand products and service names are trademarks or registered trademarks of their respective holders. Below is a partial listing of other trademarks or registered trademarks referenced herein:  Cisco™ is a trademark of Cisco Systems, Inc.  Sun, Sun Microsystems, the Sun Logo, Java, JRE and all other Sun trademarks, logos, product names, service names, program names and slogans that are referred to or displayed in this document are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. This product includes software developed by the Apache Software Foundation (http://www.apache.org/). This product includes code licensed from RSA Data Security Skype, SkypeIn, SkypeOut, Skype Me, the Skype Logo and the S logo and other marks indicated on Skype’s website are trademarks of Skype Limited or other related companies. Esper is a trademark of EsperTech, Inc. Jboss is a trademark of Red Hat Middleware, LLC.  Oracle 10G is a registered trademark of Oracle Corporation and/or its affiliates.  MS SQL Server  is a registered trademark of Microsoft Corporation in the United States and/or other countries.  JasperSoft, the JasperSoft Logo, JasperReports, the JasperReports logo, JasperIntelligence, JasperDecisions, JasperAnalysis, Scope Center, Scope Designer, and JasperServer are trademarks or registered trademarks of JasperSoft, Inc. in the United States and other countries. ©2018 STANLEY Healthcare. All rights reserved. Doc: 0981-xxx-000 REV A.  Published:  Draft1.    KB Article: xxxxx.
EX5210R Exciter Installation & Configuration Guide    3  Table of Contents Introduction .................................................................................................. 5 Exciter Applications and Industry Examples .............................................. 6 Theft Prevention .................................................................................................. 6 Process Control ..................................................................................................... 6 Automatic Inventory Management ..................................................................... 6 Real-Time Alerts ................................................................................................... 6 Security applications ............................................................................................ 6 Exciter Features ............................................................................................. 7 RFID Detection of STANLEY Healthcare Tags ...................................................... 7 Tag Behavior Modification .................................................................................. 7 Message Programming Functions ........................................................................ 8 Network Connectivity .......................................................................................... 8 Chaining ............................................................................................................... 8 LED Status Indicators .................................................................................... 9 Exciter Connector Panel ............................................................................. 10 Wiring the Exciter ....................................................................................... 12 LF Coverage ................................................................................................. 13 Network and Power Connections .............................................................. 14 Direct Power Supply ........................................................................................... 15 PoE Switch .......................................................................................................... 15 110/220 VAC to 48 VDC PoE Single-Port Injector .............................................. 16 Power Connection Summary .............................................................................. 17 Chaining EX5210R Exciters ......................................................................... 18 EX5210R Chain Connection................................................................................ 18 Configuring Chained Exciters ............................................................................ 19 Configurations for Engine 5.2 and below ....................................................................19 Configurations for Engine 5.3 and above ....................................................................21 DHCP ............................................................................................................. 23
EX5210R Exciter Installation & Configuration Guide    4  Resetting the Exciter IP Address ................................................................ 24 Mounting the Exciter .................................................................................. 25 Fixing the Exciter to a Wall/Ceiling .................................................................... 25 Mounting the Exciter to a Poll ........................................................................... 27 Appendix A: Exciter and Accessories ........................................................ 28 Appendix B: Exciter Specifications ............................................................ 29
EX5210R Exciter Installation & Configuration Guide  5 Introduction The EX5210R Rugged Exciter is a component of the STANLEY Healthcare suite of enterprise-level visibility solutions based on standard Wi-Fi wireless communications for location- based applications. The EX5210R Exciter is designed for outdoor mounting, providing robust and sophisticated RFID detection capabilities. The EX5210R Exciter triggers tags as they pass through a chokepoint or as they approach the Exciter. Tags in turn transmit a message to either the AeroScout Location Receivers or to compatible Access Points within range. The Exciter can activate or deactivate tags, program them, or even instruct the tags to operate in a specific way (for example, to blink). This provides instant acknowledgment that a tagged asset has passed through a gate, doorway, or other specifically defined area. The detection capabilities of the EX5210R Exciter combined with the location features of the AeroScout Location Engine, to make the STANLEY Healthcare suite the most sophisticated enterprise visibility solution, for various applications.  Figure 1: EX5210R Exciter
EX5210R Exciter Installation & Configuration Guide  6 Exciter Applications and Industry Examples Theft Prevention Healthcare organizations or enterprises with expensive and mission-critical equipment can tag valuable assets that are intended to remain within a specified area. The AeroScout System can track the location of such items and trigger an alert when they pass through an exit point or enter a restricted area. Process Control Manufacturing companies can track the location of equipment, carriers, and the work-in-process (WIP) inventory during a production cycle. This provides a real-time view of the production line. The type and quantity of products can be tracked through each step in the process.  Automatic Inventory Management Logistics organizations can update inventory records by automatically determining assets within defined areas, ensuring real-time knowledge of inventory levels without manual checks or barcode scanning. Real-Time Alerts Organizations can use the Exciters to trigger automated events and alerts based on the current location of an asset. For example, in a shipping yard, notifications can be sent when vehicles pass through gates and enter or exit a certain dock or bonded area. Security applications   Exciters can be installed at the entrances of restricted areas to trigger alerts when unauthorized persons attempt to enter or leave.
EX5210R Exciter Installation & Configuration Guide  7 Exciter Features RFID Detection of STANLEY Healthcare Tags The Exciter triggers Tags to transmit as they pass through a defined area, within a range of up to 6.5 meters (21.3 feet)*. This is typically enough to cover door or gate areas. The Exciter also supports a chained configuration, thus enabling an increased RFID detection range for larger areas. *In an outdoor environment, the Exciter’s actual LF coverage range is a maximum of 3meters (9.8feet), even if it is set to the maximum of 6.5m in the Engine. *When used indoors, the Exciter’s LF coverage range can reach up to 6.5meters.  Note The Exciter’s effective range may be less than the configured range due to specific site or environmental conditions. The effective range must be taken into consideration when planning and designing the deployment.  Figure 2: Exciter Positioned at Chokepoint Triggering a Tag Tag Behavior Modification Exciters can be programmed to wirelessly activate and deactivate Tags based on pre-configured conditions. Tag battery life can be extended by switching them off when they leave a defined tracking area through a gate or doorway. The Exciter can also be configured to change the Tag transmission rate temporarily or indefinitely to accommodate different usage patterns in different environments.
EX5210R Exciter Installation & Configuration Guide  8 Message Programming Functions The Exciter can store messages on the Tag for subsequent transmission. The stored messages can subsequently be triggered by other Exciters, enabling sophisticated process control functions.  The Exciter can trigger a Tag to:  Transmit up to 15 bytes of data sent to it by the Exciter  Transmit one of 15 pre-stored (customer-created) messages  Store up to 15 bytes of data sent to it by the Exciter Network Connectivity When connected to the network, the Exciter can be remotely programmed, monitored, and its firmware can be updated via the AeroScout Engine. The Exciter can also work in an offline mode, thus eliminating the need for a physical network connection. In the offline mode, however, remote configuration and monitoring is not available. Chaining  In an area where the required low frequency (LF) coverage exceeds the capacity of one Exciter, the Exciter can be chained to another Exciter for complete and precise coverage.
EX5210R Exciter Installation & Configuration Guide  9 LED Status Indicators The EX5210R has a single LED that changes color based on the Exciter's status as follows:  Green (continuous): The Exciter is transmitting and functioning correctly  Green (Blinking) During Firmware upgrade the Exciter blinks green until the upgrade is complete  Red (Blinking) During IP reset the Exciter blinks red  Red (continuous): Error
EX5210R Exciter Installation & Configuration Guide  10 Exciter Connector Panel  The EX5210R Exciter connection panel is housed in the sealed compartment at the back of the Exciter.   Unscrew the 8 mounting plate screws and remove the plate.    Exciter Mounting Plate 8 Mounting Plate Screws Sealed Connector Compartment
EX5210R Exciter Installation & Configuration Guide  11 The Exciter has four connectors and two switches inside the back panel:  Figure 3: EX5210R Connector Wiring (#1) Ethernet LAN Connection: RJ-45 connector. In a configuration with a physical Ethernet cable connection to the LAN, the network cable is attached here.  Permanent connection to a wired network is not mandatory. However, you must have a wired connection to configure the Exciter. Some monitoring functions are not available if the Exciter is not connected to the network. This connection is also used for Power over Ethernet (PoE, 802.3af). (#2) Power Jack: Accepts an input voltage of 24-48V DC. This is a standard 5.5 mm jack connector for direct power supply. The power Adaptor is not supplied with the Exciter and can be purchased separately. When PoE is used, this connector becomes redundant. (#3) Chain IN: RJ-45 connector. This connector is used for receiving data from Chained Exciters. The Chain IN port is also used to set the Exciter IP via the Exciter Manager Application using a special 10-pin RJ45 to DB9 serial cable (AeroScout SKU EXM-1000, or part of the Hardware Management kit). (#4) Chain OUT and Control Connector: RJ-45 connector. This connector is used for distributing power and data to Chained Exciters and to connect the External LF Antenna device. The output voltage is 12 V DC (0.5A maximum). (#5) Termination Switch: For defining the termination settings in a Chained Exciters installation. The termination of the first and last Exciter in the chain must be set to On (o-o) and the other Exciters set to Off: (-o-o-). (#6) IP Reset: Restores the Exciter’s IP address to the company-set default value. See Resetting the Exciter IP Address for details. 1 2 3 4 5 6
EX5210R Exciter Installation & Configuration Guide  12 Wiring the Exciter When wiring the Exciter, all cables must be pushed through the removable cable rubber plug and then connected to the required port. Use the cable holder to keep the cables in-line with the rubber’s holes.       Once the cables are connected correctly, place and screw in the mounting panel. Make sure the mounting panel is secured and sealed correctly before mounting the Exciter. Cable Holder Cable Rubber Plug TB-L IN OUT TB-R PWR LAN / PoE
EX5210R Exciter Installation & Configuration Guide  13 LF Coverage The EX5210R has an adjustable coverage range between 0.5m (1.6 ft.) and 6.5m (21.3 ft.) in intervals of 0.5 m (1.6 ft.). LF Coverage varies according to location*  *Indoor LF Coverage is around 6.5 meters (21.3 feet). Outdoor LF Coverage is around 3 meters (9.8 feet).  The LF coverage pattern set at 4m is displayed in Figure 5.  Figure 4: EX5210R LF range and coverage pattern set at 4m
EX5210R Exciter Installation & Configuration Guide  14 Network and Power Connections The following is a brief summary of available powering and networking options: Usage Option Description Single EX5210R– not connected to a network EX5210R can be used as standalone device that functions independently without any network connection. In this case, you only need to connect the Exciter to the power supply.  Using the AeroScout Engine Manager (AEM), set the device as “not connected to the network."  Single EX5210R– connected to a network EX5210R can be remotely controlled (for configuration and monitoring purposes) via the local area network. In this case, you need to connect it to both a power source and the network.  The power can be provided either via the LAN/ PoE connector, or via the dedicated power supply connection, using 24-48VDC. Chained Exciter In case of a Chained Exciter, the Primary Exciter controls the Chained Exciter over RS485 communication. An external power supply can be used to power up to two Exciters. In case external power is used, every second Exciter needs to be powered (#1 in the chain, #3, #5, #7). In case PoE is used (either via a PoE switch or PoE injector), two EX-5210R can be powered from one PoE port.
EX5210R Exciter Installation & Configuration Guide  15 Direct Power Supply To connect to the power supply, connect a 110/220 VAC to 48 VDC power Adaptor to the Exciter’s power jack.  Figure 5: 110/220 VAC to 48 VDC Adaptor  Note The EX5210R requires approximately 6W of power. When connecting an Exciter to a direct power source, verify that the power level is sufficient.  When using a direct power source for chaining, you can only power up to two Exciters sequentially, even if the power source is sufficient for more.  Exciters must only be powered by a limited (marked LPS or NEC class 2) power supply. PoE Switch If your network has a Power-over-Ethernet infrastructure, you can connect a CAT-5/6 Ethernet cable from the PoE switch to the Exciter’s LAN connector. This supplies both the power and the network connection.   Note PoE standard 802.3af class 0 allows power for a single EX5210R Exciter. When using PoE with the other Chained Exciters, a PoE connection must be made to every second Exciter in the chain. In addition, the LAN connectivity that the PoE supplies is not used for Chained Exciters in a chain. Chained Exciters receive data from the Primary Exciter via the Chaining IN connection.
EX5210R Exciter Installation & Configuration Guide  16 110/220 VAC to 48 VDC PoE Single-Port Injector The PoE Single Port Injector converts 110/220 VAC to 48 VDC. In addition, it can receive a network connection and you can run a single cable to the Exciter’s LAN connector, thus supplying both power and network connectivity. When using this injector, the Exciter power jack is not used.  Figure 6: 110/220 VAC to 48VDC PoE Single-Port Injector The injector’s IN connector is connected to the network. The injector’s OUT connector is connected to the Exciter’s LAN connector. The injector can be used for both networked and non-networked Exciters. In the case of a non-networked Exciters, the IN connector on the injector is not used.
EX5210R Exciter Installation & Configuration Guide  17 Power Connection Summary The following table summarizes the power connection options: Power Supply Input Output Maximum Current Available Power Maximum # of Exciters with One Source PoE single port injector 100-240 VAC, 50-60 Hz 48 VDC 0.32 A(1) 15.4 W Two Standard PoE 802.3af switch port(2) –  48 VDC 0.32 A(1) 15.4 W Two  External power Adaptor  –  48 VDC > 0.4 A > 20 W Two    Note To prevent power loss, PoE cables must not exceed 100m (330’) in length.
EX5210R Exciter Installation & Configuration Guide  18 Chaining EX5210R Exciters In an area where the required LF coverage exceeds the capacity of one Exciter, you can extend the coverage by chaining several Exciters. For example, a large entrance with two sets of double doors too wide for a single Exciter might require two Exciters chained together.  The system treats Chained Exciters as a single device with a single ID. Transmissions do not interfere with one another.  Each Exciter must be positioned to allow transmission range overlap between neighboring Exciters. This ensures full coverage of the area. Figure 8 shows 5 Chained Exciters, their connections and the state of each Exciter termination switch.  Figure 7: EX5210R Chaining Using a Power Adaptor EX5210R Chain Connection Up to 8 Exciters can be connected in a chain, as follows: 1. The first Exciter in the chain, directly connected to the LAN, is designated the “Primary”. Other Exciters are designated “Chained”.  EX5210R Exciters can act as either Primary or Chained Exciters. 2. The Primary Exciter is connected to the first Chained Exciter as follows: Primary Chaining OUT to Chained Chaining IN. 3. Chained Exciters are then connected as follows: Chaining OUT to Chaining IN.
EX5210R Exciter Installation & Configuration Guide  19 4. The Termination Switch of the Primary Exciter and the last Chained Exciter in the chain must be set to On (o-o).  On the other Chained Exciters, it must be set to Off (-o o-). 5. The Primary/Chaining configuration is set via AeroScout Engine Manager. Chained Exciters inherit the Primary Exciter ID and LF configuration. Transmission range is configurable. See Configuring Chained Exciters. Configuring Chained Exciters Each Chained Exciter must be set as ‘Slave Exciter’ and the transmission range configured, in the AeroScout Engine Manager, before being connected to the Primary. The EX5210R appears as an EX5210 in the Engine Manager. Configurations for Engine 5.2 and below 1.  Connect the Chained Exciter directly to the network via the LAN port. 2. Under IP Configuration, check Connected to network.  3. Configure the following parameters: • Transmission Range (Internal LF Exciter > Settings tab): Select the desired transmission range of the Chained Exciter so that the LF coverage is sufficient and some overlap exists between the chained Exciters.
EX5210R Exciter Installation & Configuration Guide  20 • Under Exciter Modules (General > Settings tab), make sure Enable is checked. • Under Chaining and External Connections (General > Settings tab), check Slave Exciter.  4. Under IP Configuration, uncheck Connected to Network.  5. Click OK. 6. Connect the Chained Exciter to the Primary Exciter.
EX5210R Exciter Installation & Configuration Guide  21 Configurations for Engine 5.3 and above 1. Connect the Chained Exciter directly to the network via the LAN port. 2. In the General Settings tab, under Network Configuration, make sure Connected to Network is checked.  3. Select the LF General tab and configure the following parameters: • Under General LF Parameters select LF Chaining as Chained.  4. Select the Internal LF tab and configure the following: • Select the desired Transmission Range of the Chained Exciter so that the LF coverage is sufficient and some overlap exists between the chained Exciters.  5. Select the General Settings tab again and perform the following: • Under Functional Modules make sure that Enable Internal LF is checked. • Under Network Configuration uncheck Connected to Network.
EX5210R Exciter Installation & Configuration Guide  22  6. Click OK. 7. Connect the Chained Exciter to the Primary Exciter.
EX5210R Exciter Installation & Configuration Guide  23 DHCP Exciters with firmware version 314.54 and above support Dynamic IP (DHCP) and Static IP configurations.  Static: The IP address and connection settings are specified manually. Dynamic (DHCP): The DHCP server automatically assigns an available IP every time the device connects to the network. Exciters with firmware version 314.54 and above will be set to DHCP by default. The Exciter’s IP can be changed via the Location Engine; (Select Configuration, Exciters, IP Settings or right-click an Exciter and select IP Settings. This command allows you to change the network addressing details of the exciter). For more information, see the DHCP section in the any Location Engine Deployment Guide from version 5.1 and above.
EX5210R Exciter Installation & Configuration Guide  24 Resetting the Exciter IP Address You can reset the Exciter’s IP address to the factory default value. The default IP address is 192.168.1.178. To do so, press the IP Reset button with a ballpoint pen for 5 seconds. After a successful IP reset, a flashing red LED indication appears for three seconds.  Figure 8: IP Reset Button
EX5210R Exciter Installation & Configuration Guide  25 Mounting the Exciter  Position and mount each EX5210R Exciter in the site according to the site survey recommendations. The EX5210R Rugged Exciter is designed for outdoor mounting using a specifically designed mounting plate. Mounting options include:  Walls  Ceilings  Polls Fixing the Exciter to a Wall/Ceiling 1. Using the mounting plate as a template, place and hold the mounting plate to a wall or ceiling surface. 2. Mark the screw holes that will be used for mounting.  3. Drill the holes for the screws. 4. Mount the Exciter mounting plate using the correct screws and anchors required for the mounting surface.
EX5210R Exciter Installation & Configuration Guide  26 5. Align the Exciter with the attachment hooks on the mounting plate.  6. Place the Exciter into the mounting plate and press the Exciter down until it locks into place.  Exciter attachment hooks Exciter attachment hooks
EX5210R Exciter Installation & Configuration Guide  27 7. When the Exciter is correctly locked into place, the mounting plate’s security flange will align with the Exciter’s side screw holes.  8. Screw in the Exciter to the mounting plate’s security flanges. Mounting the Exciter to a Poll The mounting plate can be mounted to a poll using a U-Bolt mounting kit. Once the mounting plate is mounted, attach the Exciter and screw it into the mounting plate’s security flanges.            Mounting plate security flange Exciter side screw holes
EX5210R Exciter Installation & Configuration Guide  28 Appendix A: Exciter and Accessories  Product SKU Description EX5210R Exciter EX-5210R M/N: EX-5200R EX5210R Exciter includes 48 VDC input, Ethernet and PoE interface. Wall mounting plate included. Power supply not included. Exciter Power Supply APD-047-U (US) APD-047-E (Europe) APD-047-UK (UK) APD-047-J (Japan) AC/DC Adaptor 45W 48 V/1.0A 90-264VAC for EX2000B, EX4210, EX5000, EX5200 and EX5210R Exciters. PoE Injector  ADP-030-U (US) ADP-030-E(Europe) ADP-030-UK (UK) ADP-030-J (Japan) PoE Power Injector for use with EX2000B, EX3210, EX4210, EX5000, EX5200 and EX5210R Exciters. 110/220VAC-48VDC.  Exciter Detector Tool EXD-1000 Tool for visualizing the effective LF Exciter transmission field. Analyzes the Exciter coverage during deployment. Includes a PC application and detector hardware that can be connected via USB to a PC. U-Bolt mounting kit  TBD Used for pole mounting
EX5210R Exciter Installation & Configuration Guide  29 Appendix B: Exciter Specifications Product Model  SKU: EX-5210R  M/N: EX-5200R Physical and Mechanical  Dimensions: 232mm X 262mm X 102mm (9.1in x 10.3in x 4in)   Weight: 1.8 kg (4lbs)  Housing: Reinforced Polycarbonate with 10%GF (Lexan 503R from Sabic) Coverage  Adjustable coverage range between 0.5m (1.6 ft.) and 6.5m (21.3 ft.) by intervals of 0.5 m (1.6 ft.). Note the following:  In an outdoor environment, the Exciter’s actual LF coverage range is a maximum of 3meters (9.8feet), even if it is set to the maximum of 6.5m in the Engine.  When used indoors, the Exciter’s LF coverage range can reach up to 6.5meters. LF Channel  125 KHz   Field intensity limits: 66dBuV/m @ 10m (ETSI)  Propagation limits: 25.7dBuV/m@ 300m (FCC)  Modulation: ASK  Network Interface  Ethernet (RJ-45) Power  Input voltage: 24-48 VDC  PoE (802.3af) 48 VDC  Maximum power consumption: 6W   Maximum power consumption of External LF Antenna: 5W Environmental  Operating temperature: -20°C to 50°C (-4°F to 122°F)  Humidity: 0 to 95%, non-condensing  Ingress Protection Rating: IP-65 Certifications  Radio: FCC Part 15,  sub-part C class B, sub-part B EN 300-330, EN 301-489 RSS 210 (Canada), EMC IEC60601-1-2 (Europe)  Safety: CE, cTUVus (EN60950)
  FCC Compliance Statement This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio and television reception. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause such interference, which can be verified by turning the device off and on, the user is encouraged to eliminate the interference by one or more of the following measures: • Re-orient or re-locate the receiving antenna. • Increase the distance between the device and the receiver. •  Connect the device to an outlet on a circuit different from the one that supplies power to the receiver. • Consult the dealer or an experienced radio/TV technician. WARNING! Changes  or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.  This device complies with FCC Rules Part 15 and with Industry Canada licence-exempt RSS standard(s).  Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference that may be received or that may cause undesired operation.  Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement.
   About STANLEY Healthcare STANLEY Healthcare provides over 5,000 acute care hospitals and 12,000 long-term care organizations with enterprise solutions that create a safe, secure and efficient healthcare experience across life’s stages. The STANLEY Healthcare solution set enables customers to achieve organizational excellence and superior care in critical areas: Patient/Resident Safety, Security & Protection, Environmental Monitoring, Clinical Operations & Workflow and Supply Chain & Asset Management. These solutions are complemented by STANLEY Healthcare’s By Your Side™ Lifetime Customer Care commitment to ensure that every customer achieves success and realizes the full value of their investment, through consulting, training, implementation and integration services. STANLEY Healthcare is proud to be part of Stanley Black & Decker, Inc. For more information, visit stanleyhealthcare.com. Follow STANLEY Healthcare on Facebook, Twitter, LinkedIn and YouTube.  STANLEY Healthcare 130 Turner Street Building 3 Waltham, MA 02453 Tel: +1-888-622-6992 North America E-mail: stanleyhealthcare@sbdinc.com Asia-Pacific E-mail: stanleyhealthcare-asiapac@sbdinc.com Europe  E-mail: shs-uk@sbdinc.com Latin America E-mail: stanleyhealthcare-latam@sbdinc.com Middle East E-mail: stanleyhealthcare-MEA@sbdinc.com

Navigation menu