Aerohive Networks AP230 Access Point User Manual Aerohive Devices QuickStart

Aerohive Networks, Inc. Access Point Aerohive Devices QuickStart

User manual-2

Aerohive Devices QuickStart
Install Aerohive devices (APs, switches, and
routers) on your network.
To register, get the latest product documentation (including a limited number of translations), see
compliance information and download software updates, visit www.aerohive.com/support.
Aerohive
device
Power
source
Connect the Aerohive device to a power source:
a 100-240 AC power outlet, or, for APs, PSE (power
sourcing equipment).
Internet
Internet
Firewall
Aerohive AP
or switch
DSL router, cable modem,
or other Internet device.
Aerohive
router
Local
network
Local
network
Aerohive AP or switch: Connect an Ethernet cable from Eth0 on an AP and from
any port on a switch to an upstream network device - switch, router, firewall...
Aerohive router: Connect an Ethernet cable from WAN/Eth0 to a DSL router, cable
modem, or other Internet device.
After the
device connects to
HiveManager, the
status LED glows
white.
©2014 Aerohive Networks Inc.
Aerohive Networks Inc. and the Aerohive logo are U.S. registered
trademarks of Aerohive Networks Inc.
P/N 330111-01 Rev. A
For more information about your
device, scan the QR code or visit
www.aerohive.com/quick
For Aerohive APs, attach external
antennas, if necessary.
Power
Network
2
Management
3
Aerohive devices act
as DHCP clients by default.
For deployment on networks
without DHCP, see product
documentation at
www.aerohive.com/techdocs.
1
Host name: AH-123456
Aerohive
device
HiveManager
Online
on premises
After connecting to the network, the Aerohive device contacts HiveManager Online or a
HiveManager physical appliance or HiveManager Virtual Appliance on premises. The device
is now ready to be managed.
OR
HiveManager
physical appliance
HiveManager
Virtual Appliance
OR
AH-123456!

Navigation menu