Aerohive Networks AP230 Access Point User Manual Aerohive Devices QuickStart

Aerohive Networks, Inc. Access Point Aerohive Devices QuickStart

User manual-2

Aerohive Devices QuickStartInstall Aerohive devices (APs, switches, and routers) on your network.  To register, get the latest product documentation (including a limited number of translations), see compliance information and download software updates, visit www.aerohive.com/support.Aerohive devicePower sourceConnect the Aerohive device to a power source: a 100-240 AC power outlet, or, for APs, PSE (power sourcing equipment).InternetInternetFirewallAerohive AP or switchDSL router, cable modem, or other Internet device.Aerohive routerLocal networkLocal networkAerohive AP or switch: Connect an Ethernet cable from Eth0 on an AP and from any port on a switch to an upstream network device - switch, router, firewall... Aerohive router: Connect an Ethernet cable from WAN/Eth0 to a DSL router, cable modem, or other Internet device.After the device connects to HiveManager, the status LED glows white.©2014 Aerohive Networks  Inc.Aerohive Networks  Inc. and the Aerohive logo are U.S. registered trademarks of Aerohive Networks  Inc.P/N 330111-01 Rev. AFor more information about your device, scan the QR code or visit www.aerohive.com/quickFor Aerohive APs, attach external antennas, if necessary.PowerNetwork2Management3Aerohive devices act as DHCP clients by default. For deployment on networks without DHCP, see product documentation at www.aerohive.com/techdocs.1Host name: AH-123456Aerohive deviceHiveManagerOnlineon premisesAfter connecting to the network, the Aerohive device contacts HiveManager Online or a HiveManager physical appliance or HiveManager Virtual Appliance on premises. The device is now ready to be managed.ORHiveManager physical applianceHiveManager Virtual ApplianceORAH-123456!

Navigation menu