Aerospace Innotech SAAT-H810 RFID Handheld reader User Manual

Aerospace Innotech Co., Ltd. RFID Handheld reader Users Manual

User Manual

SAAT-H810 Handheld RFID Reader SAAT-H810 is a potable active reader which operates in the 916 MHz band, with high performance, powerful extensible function, flexibility and integration. SAAT-H810 combines the portability and user-friendly together, which is easy to use and complies body engineering. SAAT-H810 is suitable for pet location, asset tracking, traffic vehicle management, etc. Functions  Reading range is auto-adjustable or by software  Support RS-232 and USB interfaces  Built-in Samsung ARM920T@533MHz CPU  Windows CE 6.0 operation system, based on industrial standard  Provides SDK for customers' second development Industrial Design Rugged industrial design increases SAAT-H810 normal usage time under harsh environment, and improves efficiency. IP rating of SAAT-H522 is IP65, which allows to working in various harsh environment with water dropping. Performance Index CPU Memory Samsung ARM920T@533MHz System Storage 128MB SDRAM，system flash memory 1GB NAND FLASH Operation System Microsoft Win CE 6.0 Wireless Communication 916MHz Module Antenna Gain 2dBi Display Screen four-wire resistance touch screen, Resolution 240*320 Full Color, 3.2QVGA， TFT-LCD、65K Keyboard Including 26 keypress and 4 keypress sideway，thereinto,4 keypress sideway and F1/F2/F3/F4/F5, all these 9 keypress are user-defined. External Interface USB port（10PIN、USB 2.0） Expansion Slots Micro SD(TF) Card，Support Max.32G Speaker 0.5W Output Tag operation Tag Protocol Private Protocol Tag Operating Mode Active Operating Mode Tags Reading Range 0~50m (depends on tag power output) Mechanical & Electrical performance
Weight 400g (including standard battery) Dimensions 186.5mm ×75mm ×31mm Battery 3.7V 2000mAh Rechargeable Polymer Batteries Voice Frequency Built-in speaker, microphone and earphone connector Standby Current <5mA Operating Current Depends on the working module IP Rating IP64，（IEC60529 standard） Continuous Working Period 8 hours Working Temperature -20℃~+50℃ Storage Temperature -25℃~+70℃ § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. * RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Navigation menu