Aerospace Innotech SAAT-H810 RFID Handheld reader User Manual
Aerospace Innotech Co., Ltd. RFID Handheld reader Users Manual
User Manual
SAAT-H810 Handheld RFID Reader
SAAT-H810 is a potable active reader which operates in the 916 MHz band,
with high performance, powerful extensible function, flexibility and
integration. SAAT-H810 combines the portability and user-friendly together,
which is easy to use and complies body engineering. SAAT-H810 is
suitable for pet location, asset tracking, traffic vehicle management, etc.
Functions
Reading range is auto-adjustable or by software
Support RS-232 and USB interfaces
Built-in Samsung ARM920T@533MHz CPU
Windows CE 6.0 operation system, based on industrial standard
Provides SDK for customers' second development
Industrial Design
Rugged industrial design increases SAAT-H810 normal usage time under harsh environment, and
improves efficiency. IP rating of SAAT-H522 is IP65, which allows to working in various harsh
environment with water dropping.
Performance Index
CPU
Memory
Samsung ARM920T@533MHz
System Storage 128MB SDRAM，system flash memory 1GB NAND FLASH
Operation System Microsoft Win CE 6.0
Wireless
Communication 916MHz Module
Antenna Gain 2dBi
Display Screen four-wire resistance touch screen, Resolution 240*320 Full Color, 3.2QVGA，
TFT-LCD、65K
Keyboard Including 26 keypress and 4 keypress sideway，thereinto,4 keypress sideway
and F1/F2/F3/F4/F5, all these 9 keypress are user-defined.
External Interface USB port（10PIN、USB 2.0）
Expansion Slots Micro SD(TF) Card，Support Max.32G
Speaker 0.5W Output
Tag operation
Tag Protocol Private Protocol
Tag Operating Mode Active Operating Mode Tags
Reading Range 0~50m (depends on tag power output)
Mechanical & Electrical performance
Weight 400g (including standard battery)
Dimensions 186.5mm ×75mm ×31mm
Battery 3.7V 2000mAh Rechargeable Polymer Batteries
Voice Frequency Built-in speaker, microphone and earphone connector
Standby Current <5mA
Operating Current Depends on the working module
IP Rating IP64，（IEC60529 standard）
Continuous Working
Period 8 hours
Working Temperature -20℃~+50℃
Storage Temperature -25℃~+70℃
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
* RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The device can be used in p
ortable exposure condition without restriction.