Aeroview Electronic Technology AE-Q2 RC Quadcopter Drone User Manual user muanal

Download:
Mirror Download [FCC.gov]
Document ID	3092194
Application ID	ewlrldTdVgNxlJSdH6Gj9w==
Document Description	user muanal
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	391.03kB (4887876 bits)
Date Submitted	2016-08-09 00:00:00
Date Available	2016-08-09 00:00:00
Creation Date	2016-04-13 09:51:59
Producing Software	Adobe PDF library 10.01
Document Lastmod	2016-07-08 16:31:01
Document Title	二代四轴飞机说明书（英文版）_复制
Document Creator	Adobe Illustrator CS6 (Windows)

Attention
●
Please do not use chemicals for wiping the head.
●
Please do not spill or paint acidity medicament on the head.
●
Please keep the head from high temperature or fire place.
●
Please do not strong press or bang the head.
Warning & Disclaimer
● This product is NOT a toy and is not suitable for children under the age of 18. Adults should keep the
AEROEAGLE
Aeroeagle out of the reach of children and exercise caution when operating this aircraft in the presence
of children.
● This product is a flying quad-copter that offers easy flight under good working order as set forth below.
4-Motor Aerial Quadcopter
The information in this document affects your safety, your legal rights and responsibilities. Read this
entire document carefully to ensure proper configuration before use. Failure to read and follow the
User Manual
instructions and warnings in this document may result in product loss, serious injury to you, or damage
to your aircraft.
● By using this product, you hereby signify that you have read this disclaimer carefully and that you
understand and agree to abide by the terms and conditions herein. You agree that you are solely
responsible for your own conduct while using this product, and for any consequences thereof. You
agree to use this product only for purposes that are proper and be in accordance with all applicable
laws, rules, and regulations, including international and domestic airspace regulations, and all terms,
precautions, practices,policies and guidelines AFI has made and may make available.
● AFI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from
the use of this product. The user shall observe safe and lawful practices including, but not limited to,
those set forth in these Safety Guidelines.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
Aeroview Electronic Technology Co.,Ltd
Add:No.108 Zhenxiang Street,Yonger Village,Tanzhou Town,
Zhongshan City,Guangdong Province
Tel:+86 760 86283558
Fax:+86 760 86283258
E-mail:admin@afiuav.com
Welcome to choose AFI product,
Please read this manual carefully before using.
Install The Propellers
Magnetic Calibration Instruction
LED Flight Indicator Lamp
Anti-clockwise screw the propellers with black caps onto the pointed motors.
Clockwise screw the propellers with grey caps onto the no-pointed motors.
Magnetic Calibration Steps:
① Power on the quad-copter, place it on the flat ground, switch SWC and SWA
both at Gear 1.
② Keep the remote controller accelerator at the smallest condition(rockers at
Front Lamp
the bottom position).Turn SWC from Gear 1 To Gear 3,then back to Gear1.3
times same operation quickly,keeping the yellow lamp on,horizontal
calibration begins,if not,please take the first step to start again.
③ Turn the aircraft 2-3 circles slowly with yellow lamp on,if the front lamp turns
off,it means the aircraft is not put flat,please lay the aircraft flat before
continue turning.
Back Lamp
Attention:
Do not use the
screw glue when
installing the
propellers
Back Lamp:
Slow Green Lamp: Safe for flight (with GPS)(flight indicator lamp)
Slow Yellow Lamp: Semi-safe for flight (without GPS)(flight indicator lamp)
④ Keep the remote controller accelerator at the smallest condition(rockers at
the bottom position).Turn SWC from Gear 1 To Gear 3,then back to
Quick Yellow Lamp: Remote controller turn-off(flight indicator lamp)
Remote Controller Preparation
Gear 1.3 times same operation quickly,when the front lamp turns off,vertical
Quick Red Lamp: Battery low power warning(flight indicator lamp)
Ensure the switch of SWA and SWC placed on the top position.Install 8 units AA
batteries.
calibration begins,if not,please take the first step to restart.
Keeping Red Lamp: Return home
⑤ Keep the aircraft front vertically downwards,when the green lamp keeps
Tilting Control Knob
bright, the vertical calibration begins. Rotate the aircraft 2-3 circles
Front Lamp:
anti-clockwise slowly with green lamp on.When the front lamp turns off,it
Quick Yellow Lamp: Need demagnetization
means that the aircraft front is not towards downwards vertically,please put
SWC
Slow Red Lamp: Magnetic calibration error
the aircraft front vertically downwards before continuing rotating.
Keeping Yellow Lamp: Horizontal calibration(magnetic calibration
indicator lamp)
SWA
Keeping Green Lamp: Vertical calibration(magnetic calibration indicator lamp)
Quick Green Lamp: Saving the calibration data
Green Lamp Off: Calibration completed
Other Abnormal Conditions: Front and back lamp both under quick red flash
If Calibration Needed: Front and back lamp both under slow red flash
Attention:
If the remote
controller starts
“BB…”alarms,
please exchange
the battery.
Start Your Trial Flight
Battery Preparation
Power on: Short press the button, then long press for 4 seconds
Power off: Long press for 4 seconds.
CAUTION
SWA
Gear 1:
Manual Operation
Gear 2:
Attitude Mode
Gear 3:
GPS Mode
Place the quad-copter flat on the ground and make sure the battery power indicator
lamp facing you.Turn on the remote controller, then turn on the aircraft battery. As
the pic shown,pull outward the bottom-right(
) rocker to unlock the motor, pull the
bottom-left(
) rocker to lock the motor. Flight starts.
⑥ Keep the remote controller accelerator at the smallest condition(rockers at
the bottom position).Turn SWC from Gear 1 To Gear 3,then back to Gear1.
3 times same operation quickly,when the green lamp twinkles,the magnetic
Remote Controller Indicator Light:
1.Red light keeps bright, yellow
light turns off: normal operation
or battery indication
2.Buzzer keeps flashing: Low voltage
3.Red and yellow light keep flashing
at the same time, while buzzer
alarms: hardware with fault.
calibration data storing begins.
⑦ Wait for the green lamp twinkle,when the front lamp turns red, magnetic
calibration successful; When the front lamp turns red slow twinkle,
magnetic calibration error; If the front lamp turns yellow twinkle, magnetic
calibration failed. Please restart the magnetic calibration once again.
Tilting Control Knob
SWC
SWA
Battery Capacity Indicator Lamp
Attention:
When the power
is off,short press
once to check
the battery
capacity.
Battery Switch
Attention:
SWA Gear 2-Return home,
which can be only
shifted to return
home when GPS
location function
is available before
the motor unlocked.
Gear 1
Gear 1: Manual Operation
Gear 2:Attitude Mode
Gear 2
Gear 3:GPS Mode
Controller Switch
Attention:
Please stop the
motor once the
aircraft lands.Do
not stop the motor
during flight.
Please carefully
review all related
necessary flight
information and
control the attitude
when you try the
first flight.
Switch the accelerator rocker to bottom-right--Power on the motor
Switch the accelerator rocker to bottom-left--Power off the motor

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2016:04:13 09:51:59+09:00
Creator                         : Adobe Illustrator CS6 (Windows)
Modify Date                     : 2016:07:08 16:31:01+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Title                           : 二代四轴飞机说明书（英文版）_复制
Metadata Date                   : 2016:07:08 16:31:01+08:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 68
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 7020 bytes, use -b option to extract)
Instance ID                     : uuid:a0125e26-2d3d-459e-b85a-c3047e7bff5c
Document ID                     : xmp.did:E22ECC461501E611AB53E6F0249931A6
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:78d501ac-3567-486c-8bbf-6aec08cecbb2
Derived From Document ID        : xmp.did:20632AB0A89FE511AB7CB3C7AC4B9C3C
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:20632AB0A89FE511AB7CB3C7AC4B9C3C, xmp.iid:E22ECC461501E611AB53E6F0249931A6
History When                    : 2015:12:11 10:35:06+08:00, 2016:04:13 09:51:55+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : C:\Users\Administrator\Desktop\1.png, C:\Users\Administrator\Desktop\1.png, C:\Users\Administrator\Desktop\1.png
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 389.999278
Max Page Size H                 : 299.998570
Max Page Size Unit              : Millimeters
Font Name                       : SansCondensed, UniversLT-CondensedLight, FZLTHJW--GB1-0, FZLTKHK--GBK1-0, FZLTZHK--GBK1-0
Font Family                     : Sans Condensed, Univers LT 47 CondensedLt, 方正兰亭黑简体, 方正兰亭刊黑_GBK, 方正兰亭中黑_GBK
Font Face                       : Regular, Regular, Regular, Regular, Regular
Font Type                       : TrueType, TrueType, TrueType, TrueType, TrueType
Font Version                    : 001.000, Version 6.1; 2002, 1.00, 1.00, 1.00
Font Composite                  : False, False, False, False, False
Font File Name                  : hlc_____0.ttf, Univers LT 47 Condensed Light.ttf, 兰亭黑简.TTF, 方正兰亭刊黑_GBK_0.TTF, 方正兰亭中黑_GBK_0.TTF
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 明亮
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : RGB
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Red     : 126
Swatch Groups Colorants Green   : 49
Swatch Groups Colorants Blue    : 142
Producer                        : Adobe PDF library 10.01
Page Count                      : 2
For                             : Administrator,
Bounding Box                    : 113 -851 3355 0
Container Version               : 11
Creator Version                 : 16

EXIF Metadata provided by EXIF.tools