AfterShokz ASCEHB3 Bone conduction headphone User Manual Trekz PAK MU0000161R

AfterShokz, LLC Bone conduction headphone Trekz PAK MU0000161R

Users Manual

TREKZ TITANIUMUser Guide
1.Set up your Trekz Titanium Charge 2. Pair 3. ConnectLet us take care of you!Charge the headphones with the included micro-USB charging cable. The LED indicator will turn blue when charging is complete.While off, press and hold the power button for 5 seconds to enter pairing mode. The LED indicator will flash blue and red repeatedly while in discovery.Enable the Bluetooth® settings on your device and select “Trekz Titanium by AfterShokz”. The LED indicator will turn blue once connected.We’ve got your back against damages. Register your Trekz at bit.ly/RegisterMyTrekz
Multifunction ButtonMicro-USB Charging PortMicrophone 1Microphone 2Volume up/Power ButtonsVolume downLED Indicator
ABMultifunction Button (A)Volume Up/Power Button (B) Volume Down Button (C)Play/pause music Click once One beepSkip to next song Double-click while music is playing One beepAnswer/end call Click once One beepAnswer call waiting and put the current caller on holdClick once to switch between callers One beepAnswer call waiting and hang up on current callerPress and hold for 2 seconds One beepReject a call Press and hold for 2 seconds Two beepsVoice dial Press and hold for 2 seconds “Voice dial”Redial last number Double-click “Last number redial”Function Action Prompt/”Audrey Says™”Power on/off Press and hold the power button for 2 secondsFour beeps and “welcome to Trekz Titanium”Mute Press and hold both buttons for 2 seconds while on a call“Mute on” or “mute off”Change EQ setting Press and hold both buttons for 2 seconds while music is playing“Equalization changed”Check battery status Click the volume up or down button while music is paused“Battery high, medium, low (or) charge me” Adjust volume Click the volume up or down button to adjust volumeOne beepFunction Action Prompt/”Audrey Says™”C
Part number AS600 Wireless range 33 ft (10m)Speaker type Bone conduction transducer Battery Rechargeable lithium ionFrequency response 20Hz~20KHz Continuous play 6 hoursSensitivity 100 ± 3dB Standby time 10 daysMicrophone -40dB ± 3dB Charge time 1.5 hoursBluetooth® version Bluetooth® v4.1 Weight 1.27 oz (36g)Compatible pro A2DP, AVRCP, HSP, HFP Warranty 2 yearsLED indicatorMuiltipoint pairing1. Enter pairing mode2. Press the multifunction button and volume up/power button for 2 seconds (Audrey Says™ “multipoint enabled”) 3. Audrey Says™ “connected”) 4. Shut down 5. Re-enter pairing mode6. Pair second device (Audrey Says™ “second device connected”)7. Turn the device off, then power back onEnter pairing mode, then press and hold the multifunction button, and both volume buttons simultaneously for 3 seconds.How to reset your headphonesSolid red ChargingSolid blue Charging completeFlashes red and blue Pairing modeFlashes blue Incoming callFlashes red every 2 minutes Low battery
Fitband (D) Silicon rubber bands provide adjustability to accommodate smaller head sizes. 1. Slide Fitband (R) over the right transducer and along the right arm to rest over the charging port.2. Slide Fitband (L) over the left transducer and along the left arm to align evenly with the right arm.3. Earplugs (E) Use with headphones in environments where it is safe to block out ambient noise, such as on an airplane or train.1.2. To adjust EQ settings to reduce or enhance bass while wearing earplugs, press and hold volume up and down buttons simultaneously.Optional AccessoriesDEWe’re all ears! Got a question? Eager to share an experience? Send us an email, or give us a call: support@aftershokz.com | (315) 290-3855To view this user guide in additional languages, visit bit.ly/TrekzUserGuide
• Store the headphones in a cool and dry place. The working temperature should be 0~45°C(32~113°F). Working in cold/hot environments or highly humid areas may reduce the life of the battery.• After storing the headphones for an extended period, charge the unit before using it again.• The headphones are sweat resistant, but are NOT waterproof. DO NOT submerge the headphones in water.• Listening with headphones at a high volume may affect your hearing and may distort the audio. • When cleaning the headphones, use a soft dry cloth.• Do not charge your headphones immediately after exercising, as any sweat or moisture inside the charging port could lead to a circuit burning.Note:Storage and maintenanceThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation.This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.FCC cautionThis device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class (B) digital apparatus complies with Canadian ICES-003.Declaration of Conformity of Industry of Canada
LeprlsentappareilestconformeauxCNRd'IndustrieCanadaapplicablesauxappareilsradioexemptsde licence.L'exploitationestautorisleauxdeuxconditionssuivantes:(1)l'appareilnedoitpasproduiredebrouillage,et(2)l'utilisateurdel'appareildoitacceptertoutbrouillageradiollectriquesubi,mmmesilebrouillageestsusceptibled'encompromettrelefonctionnement.ThisClassBdigitalapparatuscomplieswithCanadianICES003.CetappareilnumlriquedelaclasseBestconforme i lanormeNMB003duCanada.Anychangesormodificationsnotexpresslyapprovedbythegranteeofthisdevicecouldvoidtheuser's authoritytooperatethedevice.Toutemodificationnonapprouvl explicitementparlefournisseurdelicencedel'appareilpeutentraînerl'annulationdudroitdel'utilisateur i utiliserl'appareil.ICRadiationExposureStatementThisequipmentcomplieswithCanadaradiationexposurelimitssetforthforuncontrolledenvironments. Déclarationd'expositionauxradiations:Leproduitestconformeauxlimitesd'expositionpourlesappareilsportablesRFpourlesEtatsUnisetleCanadaétabliespourunenvironnementnoncontrôlé.Leproduitestsûrpourunfonctionnementtelquedécritdanscemanuel.
FCCRFEXPOSURESTATEMENT:ThedevicehasbeenevaluatedtomeetgeneralRFexposurerequirement,Thedevicecanbeusedinportableexposureconditionwithoutrestriction.Duetotheusedenclosurematerial,thedevicesshallonlybeconnectedtoaUSBInterfaceofversion2.0orhigher.CAUTIONRISKOFEXPLOSIONIFBATTERYISREPLACEDBYANINCORRECTTYPE.DISPOSEOFUSEDBATTERIESACCORDINGTOTHEINSTRUCTIONS.Donotusethedevicesintheenvironmentattoohighortoolowtemperature,neverexposetheunderstrongsunshineortoowetenvironment.Thesuitabletemperatureforthedevicesis0~+45ć.EURegulatoryConformanceHereby,AfterShokz,LLCdeclaresthatthisdeviceisincompliancewiththeessentialrequirementsandotherrelevantprovisionsofDirective1999/5/EC.Pleasetakeyourused,unwantedlithiumbatteriestoadesignatedplace.Donotdisposeoftheminarubbishbin.
SoundpressurewarningstatementFor the device that is tested in accordance with EN 609501:2006+A11:2009+A1:2010+A12:2011+A2:2013, it is mandatory toperformaudiotestforEN50332.This device has been tested to comply with the Sound Pressure Level requirement in the applicable EN 503321 and/or EN503322standards.Permanenthearinglossmayoccurifearphonesorheadphonesareusedathighvolumeforprolongedperiodoftime.Warningstatement:Topreventpossiblehearingdamage,donotlistenathighvolumelevelsforlongperiods.ThisdeviceisincompliancewiththerequirementsofIDA.
#beopenVisit us at aftershokz.com

Navigation menu