Agfa Snapscan 600 Users Manual 300/600 Owner's Guide

2015-02-05

• Preface
  • About SnapScan
  • Environmental requirements
  • Precautions
  • Cleaning your scanner
  • SCSI devices
  • How to use this guide
  • How to print this guide
• 1 — Preparing the scanner
  • Unpacking the scanner
  • Unlocking the scanner
  • Locking the scanner
  • Taking a closer look
  • Performing a power-on test
• 2 — Installing the scanner for the Macintosh computer
  • Hardware requirements
  • Installation of the scanner hardware
    • Choosing a SCSI ID number
    • Setting the scanner to a SCSI ID number.
    • Connecting the scanner
      • If yo u r SnapScan is the o n ly SCSI d evice to b e connected to yo u r comp u ter
      • I f your SnapScan will be connected to yo u r comp u ter together with o ther SCSI d evices
        • If you install the scanner at the end of your SCSI chain
        • If you install the scanner be tween two o ther devices:
    • Testing the connection
  • Electronic registration
  • Installing the software
  • Placing reflective originals
• 3 — Installing the scanner for the PC
  • Hardware requirements
  • Installation of the hardware
    • Instal l ation with the Agfa supplied SCSI card
      • Instal l i ng the SCSI interface card
      • Choosing a SCSI ID number
      • Connecting the Scanner
    • Instal l ation i f your PC already has a SCSI i n terface card
      • Choosing a SCSI ID number
      • Connecting the scanner
        • You r PC h as a 25 p in connecto r
          • If your SnapScan is the only SCSI device to b e connecte d to your computer:
          • If your SnapScan will be connected to your computer together with o ther SCSI devices:
            • If you install the scanner at the end of your SCSI chain
            • If you install the scanner be tween two o ther devices:
        • Yo u r PC h as a 50-p in connecto r
          • Your SnapScan is the only SCSI device to b e connecte d to your PC:
          • Your SnapScan will be connected to your PC together with o ther SCSI devices:
            • If you install the scanner at the end of your SCSI chain
            • If you install the scanner be tween two o ther devices
    • Testing the connection
  • Electronic registration
  • Installing the software
    • Windows 95
    • Windows 3.11
    • Windows NT version 3.51
    • Windows NT version 4.0
  • Placing reflective originals
• A — Using the transparency option
  • About your transparency option
  • Unpacking the transparency option
  • Unlocking the transpa rency option
  • Connecting the transparency option
  • Placing transpa rent origina ls
• B — Using the automatic document feeder
  • About your automatic document feeder (ADF)
  • Unpacking the automatic document feeder
  • Taking a closer look
  • Connecting the automatic document feeder
  • Ope ra ting the automatic document feede r
    • Placing text pages i n your automatic document feeder
    • Correcting paper j ams
  • Cleaning the automatic document feede r
    • Cleaning the transparent guide flap
    • Roller cleaning
• C — Troubleshooting
• D — Technical information on the SnapScan 300
  • SnapScan 3 0 0 specifica tions
  • Transpa rency option specifica tions
  • Automatic document feede r specifica tions
• E — Technical information on the SnapScan 600
  • SnapScan 6 0 0 specifica tions
  • Transpa rency option specifica tions
  • Automatic document feede r specifica tions
• F — SnapScan regulation compliance
  • Safety regulations
    • UL Safety Sta tement
    • FTZ: Bescheinigung des Herstel l ers/Importeurs
    • TÜV: Wichtige Sicherhei tshinwei se
  • Electromagnetic interfe rence
    • Federal Communications Commission Radio Frequency Inte rference Sta tement
    • Canadian department of Communications