Agilent Technologies 85225F Users Manual Standard Performance Ing System Installation And User’s Guide

2015-02-02

• Title Page
• Safety and Regulatory Information
• In This Guide...
• Contents
• Introducing the Agilent 85225F Performance Modeling System
  • Performance Modeling System Configuration Overview
  • RF and DC Measurement System Configuration
    • Figure 1 System Block Diagram
    • The RF Subsystem
    • The DC Subsystem
    • The Bias Networks
    • Component Integration
      • Figure 2 System Components
      • Table 3 Front Panel System Connections, with Agilent 4156C
      • Figure 3 Front Panel Connections with Agilent 4156C
      • Table 4 Front Panel System Connections, with Agilent E5260A or E5270B
      • Figure 4 Front Panel Wiring Diagram with Agilent E5260A or E5270B
      • Table 5 Rear Panel System Connections with Agilent 4156C
      • Figure 5 Rear Panel Wiring Diagram with Agilent 4156C
      • Table 6 Rear Panel System Connections with Agilent E5260A or E5270B
      • Figure 6 Rear Panel Wiring with Agilent E5260A or E5270B
      • Figure 7 DC/RF Cabling Diagram - DC and RF Configuration
  • CV, RF, and DC Measurement System Configuration
    • Figure 8 System Block Diagram
    • The CV Subsystem
    • Component Integration
      • Figure 9 System Components
      • Table 7 Front Panel System Connections
      • Figure 10 Front Panel Wiring Diagram
      • Table 8 Rear Panel System Connections
      • Figure 11 Rear Panel Wiring Diagram
      • Figure 12 DC/RF Cabling Diagram - DC and RF Configuration
      • Figure 13 DC/RF Cabling Diagram - Parametric Configuration
    • The Low Leakage Switch Mainframe
      • Table 9 Rear Panel Connections, including Low Leakage Switch Mainframe
      • Figure 14 Rear Panel Wiring Diagram including Low Leakage Switch Mainframe
      • Figure 15 DC/RF Cabling Diagram - Parametric Configuration with Low Leakage Switch Mainframe
  • 1/f Noise, CV, RF, and DC Measurement System Configuration
    • Figure 16 System Block Diagram
    • Figure 17 1/f Noise Measurement Block Diagram
    • Component Integration
      • Figure 18 System Components
      • Table 10 Front Panel System Connections
      • Figure 19 Front Panel Wiring Diagram
      • Table 11 Rear Panel System Connections
      • Figure 20 Rear Panel Wiring Diagram
      • Figure 21 DC/RF Cabling Diagram - DC and RF Configuration
      • Figure 22 DC/RF Cabling Diagram - Parametric Configuration
  • Instrument Control Interface
    • Table 12 GPIB Addresses
  • The LAN/GPIB Gateway
    • Figure 23 Rear Panel Wiring Diagram for LAN/GPIB Gateway
    • The System Controller
      • Table 13 Personal Computer Requirements
      • Table 14 UNIX Workstation Requirements
    • The Rack Cabinet
  • Performance Characteristics and Specifications
    • Table 15 Supplemental System Characteristics
    • Interference Standards
    • Performance Modeling System Performance Specifications
    • RF Subsystem Performance Specifications
    • DC Subsystem Specifications
    • Bias Network Characteristics
• Installing the System
  • To prepare the installation site
    • Table 16 Environmental Requirements
    • Table 17 Electrical Requirements
  • To receive the system
    • To unpack the shipment crate containing the rack cabinet
    • To verify the shipment
      • Table 18 Replaceable Parts
  • To install the work surface
  • To ensure your safety while using the system
    • Precautions for Performing Floating-Ground Measurements
    • To perform floating-ground measurements
    • Precautions for Avoiding Electrostatic Discharge
  • To connect the bias networks
    • Agilent 4156C Systems
    • Agilent 4156C Systems with Agilent 41501B Expander Box
    • Agilent E5260A/70B Systems
  • To switch on power to the system
  • To configure the LAN/GPIB gateway for functional verification
• Verifying System Functionality
  • To choose a verification process
  • Understanding the System Functional Verification Test
    • Required Tools
  • Performing the System Functional Verification Test
    • If you encounter a problem
• Servicing the System
  • To troubleshoot the system
  • To remove or replace a system component
    • To order replacement parts
  • To receive additional assistance
    • Table 19 Contacting Agilent Technologies
  • To package the system for transport
• Enhancing Measurement Accuracy
  • To enhance measurement accuracy
  • Understanding System Measurement Calibration
    • Required Tools
  • Performing a Coaxial System Measurement Calibration
    • If you encounter a problem
  • Periodic System Component Calibration
• DC Subsystem Functional Verification Test
  • Understanding the DC Subsystem Functional Verification Test
    • Required Tools
  • Performing the DC Subsystem Functional Verification Test
    • If you encounter a problem
    • If you encounter a problem
• RF Subsystem Functional Verification Test
  • Understanding the RF Subsystem Functional Verification Test
    • Required Tools
  • Performing the RF Subsystem Functional Verification Test
    • If you encounter a problem
• CV Subsystem Functional Verification Test
  • Understanding the CV Subsystem Functional Verification Test
    • Required Tools
  • Performing the CV Subsystem Functional Verification Test
    • If you encounter a problem
• 1/f Noise Subsystem Functional Verification Test
  • Understanding the 1/f Noise Subsystem Functional Verification Test
    • Required Tools
  • Performing the 1/f Noise Subsystem Functional Verification Test
    • If you encounter a problem
• Understanding the Bias Networks
  • Features
  • Characteristics
    • Table 20 11612V Option K11/K21 Bias Network Characteristics
  • Operation
    • Figure 24 Bias Network Schematic
• Network Analyzer Performance Specification Summary
  • Network Analyzer System Performance
    • Maximum Output Power
    • Dynamic Range
    • Measurement Port Characteristics
    • Measurement Uncertainty
• Index