Agilent Technologies Scanner Epsg1026386 Users Manual

epsg1026386 to the manual d936162a-fd58-45d2-8f48-fc4f74aa6293

2015-02-02

: Agilent-Technologies Agilent-Technologies-Agilent-Technologies-Scanner-Epsg1026386-Users-Manual-413389 agilent-technologies-agilent-technologies-scanner-epsg1026386-users-manual-413389 agilent-technologies pdf

Open the PDF directly: View PDF .
Page Count: 35

Document Control Log
Table of Content
8.1 Planning (7.2.1a, 7.2.2c, 7.5)
8.3.1 Production (7.5, 7.5.5, 7.6, 8.2.3, 8.3)
8.4 Delivery (7.5.1, 7.5.5, 8.2.1)
8.4.1 Shipping (7.5.5)
9.1 Service Solutions Unit (SSU) (7.5.1, 7.5.2, 7.5.3, 7.6)
The Service Solutions Unit’s mission is to build customer value and intimacy through support services and solutions. These either extend the usefulness and product life of hardware products, or are unique services such as consulting and training that ...
There are two separate entities in SSU from an operational perspective to better serve customers. The SSU organization will focus on business development, marketing and R&D customer and planning issues while the SSU SDO, Service Delivery Operation del...
9.2 Application Engineering Organization (AEO)
- Document Control Log

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 1 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

Document Control Log

REV

NO.

CHANGE SUMMARY

DOCUMENT

OWNER

APPROVER

DATE

APPROVED

112

Updated Document and Fixed Broken Links. Addressed DEKRA NC by

referencing EMG OF as part of AOF. Changed wording to aid clarity in

section 9.6 related to an old system CASPER now Siebel.

Section 8 updated to reflect relationship between AOF and EMG OF.

Section 2.2 Org Chart updated.

Section 4.2. Revised wording related to Infrastructure Org roles and

responsibilities

Kevin Fawl

(BMS Team)

Ted Tucker

13-Nov-2012

Table of Content

Sec#

Topic

ISO9001: 2008 Clause

Page

Introduction

 Purpose, Background, Reference, Scope

4.2.2

Organization, Responsibility and Authority

 Org. Chart

4.1, 5.2, 5.3, 5.4.2b, 5.5.1, 5.5.2,

5.5.3, 5.6.1, 6.1, 5.3

4-6

Business Management System Structure

 Business Management System Architecture (process map)

7.2.1c

7-10

Business Management

 Business Management System (e.g. Quality Policy, Disaster

Recovery, Quality Education, Customer Property, Required

Documents).

 Strategic Planning: Acquisitions, Technology development

 Management Review

 Continual Process Improvement: CPI, Six Sigma

 Manage Technical information: TIS

 Infrastructure Organizations:

 Financial Management

 Human Resources

 Information Technology (IT)/ ERP

 WPS: Plant, Equipment and Facilities Management

4.2.3, 4.2.4, 5.3, 5.6, 6.2.2, 7.2.2,

7.4, 8.1, 8.2.1, 8.2.2, 8.3, 8.5.2,

8.5.3, 7.5.4

4.1c, 4.2.1a, 4.2.1b 5.4.1, 7.1

5.6

5.3b, 5.4.1, 8.2.3, 8.5.1

6.3c, 7.1d, 8.4, 8.5

6.0

5.1, 6.3.c

6.2

6.3, 6.4, 6.1, 6.3

6.3, 6.4

11-16

Marketing

 Marketing Insight/Scanning

 Customer Requirements Definition

 Market Product Road Mapping

 New Product Launch and Execution

 Customer Sales Channel

 Outbound Marketing

 Field Training

 Competitor to Competitor Analysis

5.4, 7.1

5.2, 7.2.1, 8.2.1

7.3

7.2.1

7.2.3

6.2.2

5.4, 8.4

Research and Development

 Product Life Cycle

7.1, 7.3.2, 7.3.5, 7.3.6, 7.3.7

8.2.3, 8.2.4, 8.4, 8.5.1

Sales Management

 Field Sales

 Customer Contact Center

 EMG Customer Data

7.2.1

7.2.2, 7.2.3

18-20

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 2 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

Order Fulfillment

 Planning

 Materials Purchasing

 Manufacturing

 Delivery

 NPI/Engineering Support

7.2.1a, 7.2.2c, 7.5

7.4, 7.4.1, 7.4.2, 7.4.3

7.3.4, 7.3.6 7.5, 7.6, 8.2.3, 8.3

7.5.1, 7.5.5, 8.2.1

7.3, 7.3.4, 7.5.1, 8.2.3, 8.2.4,

8.5.2, 8.5.3

21-25

Customer Satisfaction

 Service Solutions Unit/Service Delivery Op: Repair, Cal.

 Application Engineering Organization

 Professional services and support

 Remarketing Solutions Division

 Customer Surveys: ACS

 Customer Feedback: CFS, VOC, OBD, OTD, Bluebook

 Escalations: CIRF, Presidents line, Order Delivery

7.5.1, 7.5.2, 7.5.3, 7.6

6.2.2, 7.2.3

6.3c

8.2.1, 8.4

4.1e, 5.6.2b, 7.2.3, 8.2.1, 8.4

7.2.3, 8.2.1

26-30

Abbreviations used in this manual

Documentation Log

32-35

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 3 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

1. Introduction

1.1 Purpose

This Manual is a summary description of the Electronic Measurement Group (EMG) and its basic policies. It

is intended to be used by all EMG employees, external temporary workers, EMG customers, and Business

Management System auditors (internal and external). This manual is intended to help EMG deploy its

policies, processes and organization to achieve its quality goals and comply with applicable regulations/

standards and understand the overall business processes. To view the EMG BMS Web site go to:

http://epsg.communications.agilent.com/quality/bms/

1.2 Background:

This Manual was written under the direction and leadership of EMG management. The owner of the EMG

Business System Manual is the EMG Business Management System Representative. The controlled copy is

located on the web: http://epsg.communications.agilent.com/quality/bms/040318_docMap.asp

Changes to this Business Management System Manual are made per the “Document Control Requirements”

process. Definitions of special terms, acronyms, and abbreviations used in the EMG Business Management

System are provided at the end of this document.

Dave Packard and Bill Hewlett formed HP in January 1939 developing test and measurement products.

Agilent Technologies was formed in 1999 as a result of a strategic realignment of Hewlett Packard into two

companies. The computing and imaging elements of the business remained with Hewlett Packard while

Agilent Technologies focused on the Communications, Electronics, Life Science and Healthcare Industries.

As of November 1, 1999 Agilent Technologies became its own company separate from Hewlett Packard.

EMG is a major group within Agilent Technologies and is a leading provider of electronic test equipment.

1.3 Scope: (4.2.2)

EMG‟s Business Management System is comprised of all the organization policies, procedures, plans,

resources, processes and the delineation of responsibility and authority, all deliberately aimed at achieving

product or service quality levels consistent with customer satisfaction and organization objectives. These

policies, procedures collectively with our quality objectives and quality policy define how EMG works and how

quality is managed. The EMG Business Management System includes EMG quality-related activities

worldwide. EMG Employees and external temporary workers follow EMG Business Management System

policies, processes and procedures. Product Conformity is measured in alignment with customer feedback

(ACS) and Agilent Technologies‟ Quality Policy. This is a Level 1 document.

EMG sites and entities are registered with, and audited by, and/or certified by regulatory standards agencies

per the agencies rules. This Business Management System Manual defines the Quality philosophy and

System in use at EMG Businesses worldwide. The businesses certified to ISO 9001:2008 are listed in the

ISO9001 certificate addenda: http://www.agilent.com/quality/EMG_ISO9001.pdf.

The EMG Business Management System complies with:

a) Agilent Technologies‟ Policies & Procedures

b) ISO9001:2008

c) ISO/IEC 17025 (EMG complies with this standard as appropriate).

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 4 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

2. Organization and Responsibility (4.1, 5.2, 5.3, 5.4, 5.4.2b, 5.5.1, 5.5.2, 5.5.3d, 5.6.1, 6.1)

2.1 EMG organization

EMG consists of:

Research and Development, Marketing, Field Sales, Quality, Order fulfillment (Manufacturing &

Procurement), Customer Services & Support and aligned Divisions.

a) EMG Customer Experience & Quality Organization consists of Customer Experience,

Quality Engineering, Quality Information, Business Management System, Education, Data

Quality, Product Solutions, Environmental Compliance, Safety & Regulations and Quality

Process. These areas provide services and tools to help EMG businesses achieve goals

and objectives.

b) Divisions include research and development (R&D) and Marketing. Some businesses

include professional services & support as required.

c) EMG OF includes manufacturing, procurement and NPI-OF areas where they assist R&D by

building prototypes and pilots of the new designs.

d) Field Operations includes Field Sales, the Remarketing Solutions Division and the Customer

Contact Center.

e) Customer Services and Support includes the calibration and repair facilities and the Service

Parts Operation.

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 5 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

2.2 The EMG organization chart

Depicted below is the management with executive responsibility in EMG and has the authority to

establish or infuence changes to the EMG Quality Policy and Business Management System.

See the following URL for current EMG organization chart:

http://epsg.communications.agilent.com/about/org/

a) EMG President & General Manager jointly owns the BMS with the EMG VP of Customer Experience

& Quality.

b) EMG VP of Customer Experience & Quality (CE&Q) ensures EMG has a robust Business

Management System (BMS) to address customer expectations, quality and regulatory requirements.

c) The EMG Management Representative (BMS Manager) is appointed by EMG Top Management,

reports to the EMG VP of Customer Experience & Quality and has the responsibility and authority to

ensure the EMG Business Management System is effectively established and maintained per the

regulations and standards cited in ISO9001 clause 5.5.2.

d) EMG TAG Team: This team is lead by the EMG Manager Representative (BMS Manager). This team

exists to share best practices/learning, improve quality, and add rigor to the BMS.

e) BMS Representatives assist in the implementation of the BMS and are typically dotted line/support

the Business Management System Manager.

f) Site Management Liaisons are identified to assist the BMS representatives as appropriate.

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 6 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

2.3 Top Management

a) Will ensure that appropriate communications are established within the organization and that

communication takes place regarding the effectiveness of the quality management system.

(E.g. coffee talks, EMG News, video clips, Quality Blue Book...etc) (5.5.3d, 4.1)

b) Will ensure communication throughout the organization regarding customer requirements.

(5.5.2c)

c) Will provide the required resources and training for implementing and maintaining the BMS

and continually improving it effectiveness. (6.1)

d) Will conduct business reviews selecting key quality and business measures to be evaluated

at least on an annual basis and maintain records and action items as per the MRP

(Management Review Process).

e) Will ensure products and services meet specifications. They ensure process effectiveness,

compliance with applicable regulations/standards, and customer loyalty.

f) Will ensure customer requirements are developed and achieved while enhancing customer

satisfaction. (Customer Focus) (e.g. ACS, CFS, OBD) (5.2)

g) Will ensure the Quality Policy meets organizational requirements, focus on improving the

effectiveness of the BMS, ensures quality objectives align with Agilent Quality Policy, and

appropriately communicate and review yearly for continuing sustainability. (5.6.1)

h) Quality planning is established to generate and plan the quality priorities. (e.g. “EMG QLT

review and implementation) (5.4.2)

i) Will ensure quality priorities are established (Measures of Success), measurable and align

with our quality policy (e.g. OBD, OTA, OTS, TAT) (5.4.1)

j) Will ensure changes to the BMS (e.g. strategy, structure, etc.) are planned and maintained

by communicating these changes appropriately (e.g. to BMS Manager, Quality Mgr., etc)

through the GM and ELT. (5.5.3)

k) EMG businesses/entities have the final responsibility and authority for their respective

products‟ design, quality, marketing, manufacturing, distribution, installation and service,

although many activities are common at the Group level.

l) Will ensure that responsibilities and authority are defined and communicated appropriately

within the organization. Responsibilities and authority can be defined written or verbally

depending on the risk and impact to the business.

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 7 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

3. Business Management System Structure

3.1 Business Management System Architecture

The EMG Business Management System is a set of requirements/policies, and procedures

designed to be effective, simple, uniform, and easy to audit. The architecture of the business

management system and its description in this Business Manual is based on ISO9001: 2008

Standards and “Process Mapping”. See below for process map.

EMG Business Management System requirements, processes and procedures are common

worldwide unless there is a compelling, justifiable, verifiable and documented rationale for

variations that have been reviewed and approved by the cognizant authority. (7.2.1c)

a) EMG Documentation is structured in this tiered hierarchy.

Tiered

Hierarchy

EMG

Level 1

Business Management System Manual

Level 2

Required Documents: Cal Sys Manual, 6 Doc

Level 3

Entity Specific Documents/local procedures

Level 4

Records

b) EMG‟s input and output map (EMG BMS Relationship Map) depicts the flow of our overall key

processes.

The details of each key process can be found in this BMS Manual and they consist of the following:

 Orders: section 7.2

 Marketing: section 5.0

 R&D: section 6.0

 Sales Management: section 7.0

 Order Fulfillment: section 8.0

 Service Solutions: section 9.1

 Business Management: section 4.0

 Improvement Activity: This touches all elements of the organization and includes such

program as Escalations, Customer Feedback, CPI, Management Review, etc. Most of

elements can be found in section 4.0.

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 8 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

EMG BMS Relationship Map

c) EMG Business Process Map:

The top Chevrons are the level-one, key processes.

The blocks below each Chevron are the level-two sub-processes.

Each level-one process is defined in this Business Manual.

Sales

Management

Customers

Requirements Satisfaction

Business Management System

Orders

R&D OF

Improvement Activity (CPI)

Service

Solutions

Marketing

Sales

Management

Customers

Requirements Satisfaction

Business Management System

Orders

R&D OF

Improvement Activity (CPI)

Service

Solutions

Marketing

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 9 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

EMG Business Process Map

Funnel &

Forecast

Management

Business

Planning and

Review

R&D

(Product

Generation)

Order

Fulfillment

Customer

Satisfaction

Management

R&D

Marketing

Materials

Sales Mgmt.

Order fulfillment

CCC

Cust. Solutions

Quality

Program Key

Marketing

Order

Generation

Business

Management

Oracle

Execute

Product

Life Cycle

Human

Resource

Management

Financial

Mgmt.

Information

Technology

WPS

Customer

Strategic Bus.

Plan

Service

Solutions

Marketing

Insight/Scanning

Escalation

Processes

Customer

Feedback

Customer

Surveys

Used across map

CPI

Sales

Management

(Order

Generation)

Market and

Product Road

Mapping

New Product

Launch and

Execution

Outbound

Marketing

Field Training

Customer

Requirements

Definition

Competitor to

Competitor

Analysis

TIS

Planning

Customer Sales

Channel

Customer

Contact

Center

Materials

Procurement

Business Mgmt

System

Management

Review

Enterprise

Resource

Planning

Remarketing

Solutions

Infrastructure

Organizations

Professional

Eng. Services

Custom

Solutions

AES

Delivery

Manufacturing

NPI

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 10 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

4. Business Management

Business Management contains many high level functions to run our organization. These functions

act as a resource while providing support and direction and are critical to success of our overall

business. EMG adheres to Standards of Business Conduct:

http://sbc.corporate.agilent.com/ch1.htm

4.1 Business Mgmt. System (4.0, 4.2.3, 4.2.4, 5.3, 5.6, 6.1, 6.2.2, 7.2.2, 7.4, 7.5.4, 8.2.1, 8.2,2,

8.3, 8.5.2, 8.5.3)

EMG implements a business management system that ensures customer requirements are fully

met through the consistency in execution and maintenance of our internal operations, which directly

affect EMG‟s ability to produce high quality products and services.

4.1.1 Quality Policy (5.3)

EMG adheres to Agilent Technologies Quality Policy, which can be reviewed at:

http://emg.communications.agilent.com/quality/policy.asp

All EMG managers and employees support the implementation of this Quality Policy in accordance

with their roles and responsibilities in the organization.

4.1.2 Quality Education: (8.5.1, 8.2.1, 5.3b)

EMG Quality Education has the role of establishing the standard course requirements for the

Quality and Six Sigma classes to ensure consistent format and delivery to employees across the

businesses. The standard course requirements include:

 Clear Learning Objectives

 Available Resources

 Employee Learning Assessment

 Clear Linkage to Strategic Initiatives and Business Objectives

EMG Quality Education has the responsibility of working with the business units to ensure each

course will build awareness or skills in Quality/Six Sigma which can then be utilized by a business

to achieve their business objectives.

EMG Quality Education measures of success are based on the number of seats in the courses

delivered to EMG employees. Quality of the course, instructor where applicable, and the delivery of

the course is evaluated based on the employee assessment.

http://emg.communications.agilent.com/quality/education/default.asp

4.1.3 Measurement analysis improvement (8.1)

EMG has implemented monitoring, measurement, analysis and improvement of processes and

tools at the appropriate levels to demonstrate conformity, ensure conformity, and continually

improve the effectiveness of the BMS (e.g. CFS; Quality Bluebook; OBD).

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 11 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

4.1.4 Customer Property

EMG exercises care with customer property while it is under the organization‟s control or being

used. Each area will use local processes to record and track the status of customer property in the

rare instance when EMG receives customer products or property. If customer property is lost,

damaged or otherwise found to be unsuitable for use, this is reported to the customer and records

are maintained locally. (Examples of customer property: government contracts, special handling

specification, product or test equipment).

4.1.5 Core Documents/Processes

EMG‟s quality management system is defined and shown in the EMG Process Map. Details of

specific processes we are required to use can be found in the EMG Documentation in Webdoc or

the Agilent Technologies web site.

http://epsg.communications.agilent.com/quality/bms/040318_docMap.asp

These include-

 EMG BMS Manual epsg1026386

 Management Review Requirements E106 (5.6) epsg1028737

 Management Review Guide

 Corrective and Preventative Action Requirements E101 (8.5.2, 8.5.3) epsg1028733

 Quality Assessment Program Manual E102 (8.2.2) epsg1028734

 Documentation Control Requirements E100 (4.2.3) epsg1028732

 Training Requirements E105 (6.2.2) epsg1028736

 Control of non-conforming Product/Process Requirements E103 (8.3) epsg1028735

 Control of Quality Records Requirements E104 (4.2.4) epsg1028767

 EMG ESD Control Manual epsg1039112

 Calibration Requirements E108 (7.6) epsg1033182

 Calibration System Manual epsg1024153

 Measurement Uncertainty Validation Process epsg1059922

 EMG Calibration Policy epsg1033182

 Option 1A7 & A6J Introduction Guide epsg1038158

 HWTC Manual epsg1075658

 Anti-virus requirements epsg1115641

The Disaster Recovery Processes/plans can be found at:

 http://finance.agilent.com/agrm/organization/index.htm Disaster Recovery (Finance)/Agilent Risk Management.

 http://wps.service.agilent.com/drp/site_index.htm -Disaster Recovery (WPS)

 http://one.it.agilent.com/security/programs/drp/ - IT Disaster Recovery Plans

CIR (Customer Issue Resolution) Process can be found at: http://emg.communications.agilent.com/quality/cirf/

 Learn more about the CIR process in section 9.7 of this manual.

Other Business Management System information can be found at:

http://legal.agilent.com/rim/index.shtm-General Retention Schedule

http://sharedoc.collaboration.agilent.com-Sharedoc

http://epsg.communications.agilent.com/quality/bms/040318_docMap.asp -Documented procedures

http://www.agilent.com/quality/qualityman.pdf -Agilent Quality Manual

http://qes.supplychain.agilent.com/ -Agilent Quality Website

Design and Manufacturing Document List

Design Standards Users Group

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 12 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

4.2 Strategic Planning (4.1.c, 4.2.1a, 5.4.1, and 7.1)

The strategic plan is developed at the EMG level encompassing all business processes and stating

the direction, leadership, and transformation required to meet specific goals. EMG will improve

customer satisfaction and earn unrivaled loyalty through personalized customer relationships.

Capitalize on our product leadership. Create customer value and intimacy through innovative

systems, high-valued services and support solutions and accelerate EMG business process

transformation.

EMG has yearly strategy reviews at the Group level to ensure plans are consistent with changing

market conditions. EMG focuses on customers, competitors and our offerings. After the strategy

review, our annual financial plan is developed (SCALE: short term commitment and long term

estimate) using the SPR (strategic plan review) as the baseline for profitability and ROIC (return on

invested capital). Tactical reviews are held quarterly to review financial results, NPI revenues,

market share, customer satisfaction, and employee satisfaction.

4.2.1 Acquisitions:

a) Corporate Development (CD): Supports the ongoing assessment of Agilent‟s enterprise business

portfolio to identify candidates for active abandonment or investment. CD insures strong links

between the enterprise and Group strategies, focusing Agilent‟s overall prospects for top line

growth and value creation. This site is designed to support the needs of those involved in

transactions, integration, strategic planning, and new ventures within the businesses and corporate

functions. http://corpdev.agilent.com/

b) EMG has developed an Acquisition Lifecycle (ALC) process that provides the EMG business with

additional acquisition support not specifically covered by corporate development personnel and

processes. ALC Web site, ALC Standard

4.2.2 Discontinuance/Obsolescence strategy is determined in each business. The EMG

Discontinuance Plan is the key document that is used to plan and execute the discontinuance and

final obsolescence of products at the end of their lifecycle. The Discontinuance Plan is split into

several sections, and a cross-functional team is required to address these sections effectively.

The Corporate Discontinuance Process can be found at:

http://wcosedoc.cos.agilent.com/stellent/groups/plc/documents/end_users/019602.doc

4.2.3 Technology Development: (7.1)

a) The Technology Leadership Organization (TLO) as the central technology organization, leads

the creation of EMG Strategy, makes R&D portfolio decisions, delivers breakthrough technology

with clear competitive advantage, executes EMG R&D programs, guides EMG level

architecture, and manages and improves EMG R&D Processes.

http://emg.communications.agilent.com/tlo/

b) EMG also links to Agilent Labs to identify and transfer breakthrough technologies into our

businesses. http://web.labs.agilent.com/

4.2.4 General Outsourcing Requirements

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 13 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

Outsourcing includes: 1) the decision to purchase a product rather than make it internally; 2) the

subsequent selection of a qualified supplier; and, 3) the management of the on-going relationship

with the supplier. The materials purchasing process description in Section 8.2 applies after the

decision, often called the “make versus buy” decision.

The General Manager of each business is ultimately responsible for the decision to outsource any

product in their business that significantly affects conformity with customer, stakeholder, and

regulatory requirements. Once the decision to outsource is made, responsibility for control falls on

the immediate management of the operation responsible for the product, and the supply-chain

management professionals that assist them. The degree of control for the outsourcing depends on

the significance of the outsourcing on product conformity and whether the outsourcing concerns a

new or existing product.

The EMG Product Lifecycle (PLC) process establishes the recommended management

checkpoints and basic considerations for the control of product lifecycle transitions, including

outsourcing for new product introductions and manufacturing, if the new product is taken to market.

The PLC process description is found at URL: http://sharedoc.collaboration.agilent.com/sites/EMG-

PGE/SD/EMG%20PLC/EMG%20PLC%20Rev%205.0/emg_plc_process%20-

%20epsg1024851.htm

A complementary general framework for the selection and management of EMG contract

manufacturers is found in here: #epsg1043961. Outsourcing procedures are determined at the

local level and typically described in the Quality Procedures Manual and/or other local process and

procedures.

In some cases strategic suppliers are shared across local operations in EMG or its business

divisions. In these cases, one entity may be tasked with managing all or part of the outsourcing on

behalf of the others. The Strategic Supplier Management team is an example. They manage the

overall business relationship with EMG‟s top-level strategic contract manufacturing and component

suppliers.

4.3 Management Review (5.6)

Top management for the business, reviews selected key quality and business measures to be

evaluated on at least on an annual basis and conducts a comprehensive quality review annually.

The Business Managers have the ultimate responsibility for ensuring regular management reviews

are conducted for their organization. As a result of such reviews, changes may be made to any

aspect of the quality management system including the quality policy and/or objectives to improve

suitability, adequacy or effectiveness.

EMG level Management Review

Management Review Process

4.4 CPI (5.3b, 5.4.1, 8.5.1, 8.2.3)

Continual Process Improvement in EMG is based on Management by Objectives. The EMG Quality

Manager and the Executive Leadership Team establish business-wide quality improvement

objectives that align with Agilent Technologies‟ Quality Policy. Objectives are assigned to owners

who are accountable to the Leadership Team for successful accomplishment of the objectives.

These objectives are communicated to all levels of the EMG organization. At each level, plans are

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 14 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

developed in support of the business-wide objectives, as appropriate, depending on the relevance

of the objective. Periodically, and during management reviews, progress toward completion

measures are reviewed and evaluated by the Executive Leadership Team and course corrections, if

necessary, are initiated. Other process improvement objectives may be established at EMG sites or

organizations and will be managed and monitored by the site/organization management. These

objectives will be based on local needs, criticality, and resource capacity.

a) EMG monitors and measures processes during internal audits, management reviews and

continually improve processes. (8.2.3)

b) Data analysis‟s is performed throughout our business. (e.g. CFS, Blue Book, TQRDCE, RIP,

QIC, MST).

c) Six-Sigma has been adopted by EMG world-wide as a data driven tool for improving the quality

of products and processes and improving business results. The Six Sigma program provides a

highly structured set of tools and methodologies that are applied to a variety of business

processes as appropriate to achieve breakthrough results. EMG Organizations can apply Six

Sigma to R&D, product design and development, manufacturing, sales, services, and support

functions to reduce process complexity, variation, and cost, resulting in increased customer

satisfaction and the elimination of defects. For more information about our Six Sigma program

click on the following URL‟s.

Agilent : http ://sixsigma.quality.agilent.com

Training: http://qes.supplychain.agilent.com/Global_Learning/Index.asp

4.5 Technical Information Systems (TIS): (7.1d, 6.3c, 8.4, 8.5)

Local TIS and the WW EMG BTT TIS Team (Global TIS) are responsible for the management and

implementation of new setups and changes per input from the formal processes including

ECR/ECO and approved Change Requests (CR‟s). TIS creates and maintains the bill of materials

in support of Matrix One and Oracle for the design and manufacture of our products. For more

information click on the following link: http://gtis.is.agilent.com/global/

4.6 Infrastructure Organizations (6.0)

To maximize EMG‟s businesses ability to develop and deliver high quality products and services,

certain infrastructure organizations are in place to deliver internal support services. EMG collectively

refers to these as infrastructure organizations. These organisations are managed at the Agilent

Level and are not subject to EMG Internal audit (findings will be reported if found during an audit

trail) or external audit, but are audited at the Agilent Level to ensure conformance to ISO

9001:2008. EMG shall perform periodical review with Infrastructure organizations to ensure that

they meet EMG BMS needs. Infrastructure web site.

4.6.1 Financial Management (5.1)

Finance‟s primary contribution is business planning and business analysis for decision making.

EMG provides timely, actionable information related to business reporting of process performance.

We ensure sound business controls. EMG publishes a monthly Group Financial “Blue Book” to

report financial, operational performance details and to take action on decisions to improve

operational and financial performance. EMG Finance Web site: http://finance.agilent.com/EMGfin/

Global Financial Service Description can be found at:

http://customer.quality.agilent.com/qual_mgt_systems/serv_descript.shtml

Business Continuity Plan: http://finance.agilent.com/agrm/bcp/

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 15 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

Global Financial Services (GFS) provides efficient, compliant global financial services enabling

businesses to focus on their objectives. The primary areas of responsibility include process and

operations for sales accounting, collections, general accounting, financial planning and controls and

country operations. Accounts Receivable and Collections process maintains short collection

periods, minimizes bad debt through collection efforts, minimizes potential disputes, monitors

customer pay trends, and educates customers on payment terms of the invoice. This function is

managed at the Agilent level.

Agilent Marketing Policy and Contract Solution Organization are responsible for creating contract

documents and terms, which balance Agilent requirements, and customer needs and are

appropriate for the specific business or industry.

The Agilent web site: http://customerfirst.corporate.agilent.com/Contracts/Index.shtml

4.6.2 Human Resource Management (6.2) (HR)

HR‟s role is to be the architect of organizational capability and human potential. HR‟s contributions

aim to increase the productivity and effectiveness of individuals and teams in order for EMG to meet

and exceed business objectives. HR has three primary goals: Build a stronger deeper leadership

bench; Re-enforce EMG as a best place to work; create a simpler, best in class HR function and

HR services. EMG believes, by attaining these goals that HR will create a competitive advantage

for EMG through people practices and a high-performance culture. Success is monitored quarterly

and measured annually at the Group level via external and internal metrics and surveys focused on

our three primary objectives.

HR Web site: http://EMG.communications.agilent.com/toolkit/Decisions/dec35.asp

Click here to see the HR‟s Service Description.

4.6.3 Information Technology (IT) (6.3, 6.4)

IT ensures delivery of all information technology services to enable EMG to be a high growth, high

performance company. Business fundamentals measure the success of IT results.

Reference Web Sites: IT Web site, IT Service Description.

Enterprise Resource Planning (ERP) (6.1, 6.3)

ERP systems (part of IT) integrate departments and functions across the company into single systems that

serve all those different departments and their particular needs. EMG utilises Oracle‟s Enterprise Resource

Planning system as the cornerstone of EMG‟s business process reengineering and transformation initiative.

The documented processes are located in the Knowledge Portal at:

http://knowledgeportal.corporate.agilent.com/

4.6.4 Work Place Services (WPS) Plant, Equipment and Facilities Management (6.3, 6.4)

The Global Work Place Services organization ensures that the facilities used by the Businesses

meet EMG‟s and government standards for safety, that environment regulations are met, and that

the physical plant is adequate to meet the needs of the other functions in performing their

responsibilities. Click here to see WPS Service descriptions manual.

WPS web site can be found at. http://wps.service.agilent.com/

EMG is registered to ISO14001. The Environmental Management System web site can be found at:

https://wps.service.agilent.com/global_ehs/

There are many Health and Safety programs in place within EMG. The Environmental Health and

Safety web site can be found at: https://wps.service.agilent.com/global_ehs/Ergonomics

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 16 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

5. Marketing

The marketing department has the responsibility to ensure that product designs are based on an

understanding of markets and customer needs and to ensure that the right product reaches our

customer, through the relevant sales channel. Success is measured monthly at the Group level

through orders received. (5.4, 7.1, 5.2, 6.2.2, 7.2.1, 7.2.2, 7.2.3, 7.3, 8.2.1, 8.4, 8.5)

a) Marketing Insight/Scanning (inbound): Monitor market dynamics and identify new opportunities,

technologies, and standards. This also includes determining market size and short/long term growth

rates. (7.2)

b) Customer Requirement Definition (Inbound): Identify key customer requirements and market windows

in targeted market segments. Includes prioritization of these requirements from most to least important.

Meet customer‟s unstated requirements. (7.2.1, 5.2, 8.2.1) EMG Requirements Management web site:

http://www.soco.agilent.com/org/pge/reqman/overview.htm

c) Market and Product Road Map (Inbound/Division): Translate customer requirements into Market

roadmaps and then into multiple product and service roadmaps. The objective of these roadmaps is to

define products and services that meet customer requirements, at the right time, with competitive

differentiation. (7.3)

d) New Product Launch and Execution (Division): Establish new product positioning; launch strategy,

objectives and tactics (pricing, product structure and configuration rules). Set launch criteria. Execute

launch per plan (on time and within budget). (7.2.2)

e) Customer and Sales Channel Support (Division): Provide phone and electronic support to customers,

our sales and service teams. Support content includes technical product and applications insight,

handling of some competitive situations or customer satisfaction issues, and post-sales support of our

customer‟s products. (7.2.3)

f) Outbound Marketing (Outbound): Identify hot customer applications and problems. Set Strategy,

Objectives and tactics that proactively generate awareness, leads, and move customers through the sales

funnel. Vehicles include PR, Advertising, Application notes, technical web and face-to-face seminars,

catalogs, tradeshows, customer visits, special promotions, e-mail notification, etc. Keys to success

include identification of a hot topic, and development of an integrated program tightly linked to the sales

channel. (7.2.3)

g) Field Training (Outbound/Division): Identify and deliver training to EMG and Partner Sales and support

teams on products, application, competitive and service information. (6.2.2)

h) Competitor to Competitor Analysis (Inbound/Division): High level analysis of our key competitors‟

strategies and detailed analysis of their products and services (as they compare to EMG‟s) (5.4).

Marketing Policies: All of the Marketing Policies have been developed for EMG in order to:

 Define company or business group wide principles for conducting business with our customers

 Establish overall standards of performance and control

 Provide a framework for the Business Operations to implement marketing strategy and establish

operational policy.

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 17 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

6. Research and Development

R&D and Divisions have the responsibility of designing products to meet customer requirements

and Agilent design and quality standards. (7.1, 7.3.2, 7.3.5, 7.3.7, 8.2.3, 8.2.4, 8.4, 8.5.1)

6.1 Product Life Cycle (PLC):

The EMG Product Lifecycle (PLC) is a phase review process for cross-organizational and cross

business teams from the point where product development resource involvement begins (CON =

concept) through eventual product obsolescence (CLO = closure)). The PLC focuses on a series of

checkpoints and milestones, along with a specific set of deliverables for each. The PLC embodies

the Shewhart Cycle (Plan, Do, Check, & Act)

The guidelines established here are to set and communicate quality objectives, expectations, and

responsibilities of each organizational area at each phase of product lifecycle culminating in Quality

Sign off** (click on QSO form checklist).

EMG PLC web site: http://www.soco.agilent.com/org/pge/PLC/plc.htm

**Note: Quality Sign-off confirms that the requirements for 1) products regulations, 2) environmental

test, 3) reliability and accelerated life testing, 4) specifications/DFx /Quality Objective setting, 5)

product stewardship 6) Whole Product Support Plans.…etc. have been met.

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 18 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

7. Sales Management

7.1 Field Sales (5.4, 6.2, 7.1, 7.2.2, 7.2.3, 8.2.1)

The purpose of the sales department is to grow orders for EMG within a given cost envelope. The

department applies EMG capabilities in test and measurement to help our customers improve their

business results while maximizing orders for EMG. Working together across functions in the field

and field/factory, EMG create solutions specifically tailored to achieve maximum customer

satisfaction. Customer Loyalty has always been and continues to be our most treasured asset. We

envision being known as the company that it most committed to exceeding customer expectations,

thereby earning their long-term loyalty. Key Metrics: Orders, Expenses, Funnel, Loading, and

Customer Satisfaction.

a) Order Generation: (7.2.1) This process is one of the core customer facing processes, and

includes Account Management, Opportunity Management and Deal Management utilizing web,

phone and face to face (the sales process).

b) Funnel and Forecast Management: (7.2.2) this is the core process for the monthly management

of the Order Generation Process.

c) Business Planning Review: (7.2.3) this process involves all activities related to strategic and

tactical business planning, organizing, and deploying human and other enabling resources for

on-going sales operation and order generation.

d) SSSQ website: http://emg.communications.agilent.com/wwfops/

7.2 Customer Contact Centers

EMG‟s Customer Contact Centers (CCC‟s) are responsible for management of customer

interactions from quotation to invoice processes while adhering to the quality management system.

CCC‟s are a Field Operations entity within EMG SSSQ (Sales, Service, Support and Quality) with

demarcated global presence into four major regions (ie: Americas, Asia Pacific, Europe and Japan).

In each region the Business Centers and Contact Centers make up a CCC regional unit.

The CCC organizations typically consist of four core functions:

- First Contact (FC): Primary contact for all customer interactions with the goal to resolve a

maximum proportion of requests without further handoff.

- Customer Relationship (CR): Manages orders, customer escalations and issue resolution. CR

is an end-to-end bridge between FC and CS.

- Commercial Services (CS): Focuses on non-verbal customer transaction management such

as quotations, order entry and invoicing.

- Contracts Administration (CA): Creates and administrates customer Purchase Agreements

and structuring of pre-sales contracts strategies.

Each region has typically one Business Center focusing on back-office tasks and one to several

Contact Centers focusing on customer interactions.

This model is followed globally except where specifics of each region are taken into account to

better suit customer requirements within that region.

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 19 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

7.2.1 Customer Interaction Management

Customer Interaction processes are managed by First Contact and Customer Relationship teams.

First Contact‟s focus is on the prompt fulfillment of any customer inquiry. Any special customer

requests or resolution of customer issues are managed within the Customer Relationship Team.

The First Contact team is responsible for all initial voice (phone) and non-voice (e-mail, fax, and

web) interaction with customers and business partners. Their objective is to qualify and fulfill the

requests in an expedient manner or when appropriate transfer the request within CCC or to

business partners like sales, technical support or to another business organization for further

resolution. Key FC responsibilities is to help customer in checking product availability or service

capability, providing information on marketing promotions, checking customer entitlement for

service repairs and calibration, and providing order and service status. In general, FC takes

ownership of customer issues to satisfy/delight customers by providing real time help and

responses to a wide variety of customer requests.

The Customer Relationship team is responsible for managing customer interactions that require

escalations. They also make outbound communications related to the management of sales,

support orders and agreements, negotiate changes on orders or service delivery schedules, and

initiate Service Recovery and Customer Feedback.

7.2.2 Lifecycle Management of Orders

The Lifecycle Management of Sales and Service Orders is managed by Commercial Services and

the Customer Relationship teams. Commercial Service‟s focus is on the efficient lifecycle

management of orders. Any exceptions, specific customer requests, and changes in requirements

are owned by the Customer Relationship team.

Job specialization within the Commercial Services team allows focused management of customer‟s

orders:

1. Sales Order Management – Management of sales order lifecycle for hardware and software

products, parts and services sold upfront (e.g. extended warranty, training, consulting). Key

processes performed include quoting, booking, and acknowledgement of customer‟s orders

using the ERP system, fulfilling deliveries, order changes, cancellations, product returns,

corrective transactions and billing.

2. Service Administration – Management of service orders. Service orders are primarily related to

the maintenance, system uptime support, and repair of equipment. Service Administration is

comprised of two functions – Support Agreements Administration and Support Order

Management.

 Support Agreements Administration – responsible for the order lifecycle of Agreements for

maintenance, system uptime support, software, and repair of equipment. Key processes

performed include quoting, placing Agreement orders, managing frequency of invoicing,

modifications and cancellations, and Sold Upfront Tracking into the Customer Service System

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 20 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

 Support Order Management – responsible for management of the lifecycle of per-incident Trade

and Non-Trade Support Orders from quote to invoice. Key processes performed include quoting,

placing orders into Customer Service System, follow-up on open orders, issue resolution,

invoicing and corrective transactions.

7.3 EMG Customer Data

The EMG Customer Data Team is responsible for managing EMG‟s transactional customer database, which

presents an accurate global view of customers EMG does business with and their company structures. The

team ensures that EMG can derive legal compliance, effective risk management, and operational efficiency

from the customer database through a holistic approach to customer record maintenance. The EMG

Customer Data Team holds the ownership for customer data standards for all EMG customers

worldwide.http://csbarcelona.europe.agilent.com/custmast/Index.htm

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 21 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

8. Order Fulfillment

EMG Order Fulfillment (OF) is a constituent part of Agilent Order Fulfillment (AOF). The ultimate

vision for the function is “To build a best-in-class order-fulfillment and supply-chain function with

strong gross margins and high customer satisfaction”

EMG OF Org Chart –

http://ofsc.business.agilent.com:81/About%20AOF/EMG%20OF%20Org%20Chart%20(F)Feb.pdf

8.1 Planning (7.2.1a, 7.2.2c, 7.5)

8.1.1 Demand Planning (forecasting) (7.2.1a, 7.2.2.c)

Demand Planning can be one using statistical forecasting tools or sales forecasting and creates a

plan for future customer orders. Forecast accuracy is measured and utilized to improve the

demand plan and processes. Demand planning includes the process to generate product plans,

schedule orders into the manufacturing system (ensuring proper staffing).

8.1.2 Supply Chain Planning and Scheduling (7.4)

Supply Chain planning creates a supply plan that considers supply chain constraints

(i.e., inventory, lead times, etc) and forecasted customer requirements and actual orders to create

and execute shipment plan. Customer orders are promised against the supply chain plan and in

some businesses against customer/service delivery schedules.

8.2 Materials Purchasing (7.4, 7.4.1, 7.4.2, 7.4.3, 7.5.5)

Materials purchasing management in EMG is led out of the manufacturing divisions. Purchasing

departments typically are organized as a function reporting to business unit sub-division

management. The Strategic Supplier Management (SSM) assists the businesses with managing

alliances with top-tier strategic suppliers. The EMG Worldwide Field Operations (WWFO)

organization, which manages sales and support, generally uses the BU organizations for its

materials purchasing needs. The most senior Managers with Procurement responsibility within

the manufacturing divisions are responsible for making sure supplier contracts are complete,

supplier performance reviews are done on time, and performance issues are resolved in a timely

manner.

Four generic processes are used to manage supplier quality:

1. Requirements Specification;

2. Supplier Selection;

3. On-Going Conformance Assurance; and,

4. Performance Evaluation

8.2.1 Requirements Specification

The BU purchasing operations specify the product to be purchased in accordance with the needs of

the operation and the needs of the ultimate Agilent customers. Customer requirements flow into the

purchasing process through the requirement specifications of the manufacturing entity sourcing the

material. Purchasing staff assembles the requirements to be tendered to the supplier, reviews them

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 22 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

with the division personnel needing the materials, in order to ensure accuracy, and then

communicate the requirements to the supplier.

Quality requirements specifications consist of:

 Standard purchase-order and purchase-agreement information that references company-wide

quality requirements, including reference to Agilent‟s Supplier Quality System document 5951-

1665. http://www.agilent.com/quality/supplier_quality_system_rqmt.pdf and ESD requirements.

 Business-specific standard terms and conditions, if any are developed at the division level; and,

 Specifications dictating the product form, fit, function, etc. and any other specific requirements for

approval of the product, procedures, processes, and equipment.

Current document retention standards only require controlled retention of quotations,

contracts/agreements, confidential non-disclosure agreements, and licensing agreements accepted

from/with suppliers. Where records are retained, it is by the buyer/manager of the supplier and/or

their extended team of internal customers using the supplier. (7.4.2)

8.2.2 Supplier Selection

Suppliers are selected by personnel from the operation where the purchased product will be used,

usually in partnership with materials procurement personnel. Suppliers are asked for information

relative to desired requirements. The type and extent of qualification depends on how critical the

product and supplier is to the continuity of order fulfillment, and the form, fit, and function of the

ultimate product. Where qualification is done it usually consists of ordering and inspecting

prototypes or samples. The entity that establishes the relationship with a new supplier, and/or for a

new item to be purchased, is responsible for maintaining the records from the selection and/or

qualification process, including the criteria and management approval in accordance with the

entity‟s sourcing requirements. (7.4.1)

8.2.3 On-Going Conformance Assurance

The process for ensuring that the purchased product meets the specified purchase requirements is

implemented locally, within the framework of applicable company, BU, and divisional processes and

practices. In general, incoming material shipments are checked to see if any special handling or

inspection is required, otherwise it is assumed fit for use and delivered to the user or storage area.

Material requiring inspection is flagged in the material & order management system. Material not

requiring inspection is delivered to its storage location, which is normally at the point of use. FGI

(finished goods inventory) handling procedures may vary from site to site. If verification is

performed at the supplier‟s location, the purchase order or Agreement will state the arrangements

and method of release. The usual method is to request suppliers to provide outbound quality

control testing reports. Materials procurement personnel usually manage the resolution process if a

supplier fails to meet requirements. (7.4.3)

8.2.4 Performance Evaluation

Supplier performance is managed in real time through the escalation of any observed issues

concerning the delivery, form, fit, and function of the item. In some cases, issues are tracked online,

such as on-line part failure history tracking and engineering alerts. Materials procurement personnel

typically act as the focal point for supplier quality issues. In addition, there is a guideline for

evaluating how well strategic suppliers (critical to business) have met requirements. The technology

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 23 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

quality, responsiveness, delivery, cost, and environment called TQRDCE. Company-wide guidelines

for the TQRDCE process may be found on this Global Sourcing TQRDCE Site:

http://gsce.supplychain.agilent.com/direct_matls/tqrdce.asp

The businesses determine which suppliers are subject to periodic performance evaluation and

maintain the records from such evaluations

Examples of Strategic Supply Management in EMG: SSM has a supplier performance

measurement survey tool that allows users to enter input and access results. The survey tool,

results, calendar and other SSM TQRDCE information can be found at this link:

http://emg.communications.agilent.com/ssm/

Examples of key metrics: Material cost reduction as a percent of spend, inventory levels in days of

supply on hand, on-time delivery in days early or late, and defect rates in parts per million,

percentage of parts delivered over time, or number of dead-on-arrival (DOA) products.

8.3 Manufacturing (7.3.4, 7.3.6, 7.5, 7.6, 8.2.3, 8.3)

EMG OF manufactures or manages the manufacture of the vast majority of EMG products and has

the responsibility to ensure that products are manufactured to EMG‟s manufacturing and quality

standards and supplied to the customer in a timely, cost-effective manner. EMG OF also provides

replacement assemblies to EMG Service Centers & customers and also performs factory calibration

of customer instruments when required. Example of key metrics: Quality, Delivery and Cost.

8.3.1 Production (7.5, 7.5.5, 7.6, 8.2.3, 8.3)

a) The Material Handlers assigned to the various Production Lines will pull the necessary materials

from stock as part of their daily duties.

b) Assembly & Test: Assemble instrument according to production schedule. Perform functional

test (7.3.6). Non-conforming material is identified as per procedures #E103 Agilent Control of

Non-conforming Product. (8.3)

c) System Integration (where appropriate to business): Assemble system according to customer

order and perform system tests.

d) Calibrate: (8.2.3, 7.6) The process of calibration is defined in related documents:

EMG Calibration Policy:

EMG Calibration System Manual (includes control of subcontracted calibration section 4.5)

e) EMG uses the Agilent level Design & Manufacturing Processes to determine workmanship

criteria. Web site for the list of Agilent‟s Design and Manufacturing documents:

Design and Manufacturing Document List, Design Standards Users Group

f) ESD (Electro Static Discharge) control is a quality requirement in EMG. The EMG ESD Control

Manual contains the minimum control requirements that must be followed. Compliance is

required at all sites where ESD-sensitive electronic devices are manufactured, assembled,

tested, serviced, configured, installed, handled, packaged, stored or supplied by OEMs. Each

entity/business has appropriate local controls to ensure EMG ESD Control requirements are

met." Web site for the EMG ESD Control Manual:

http://sharedoc.collaboration.agilent.com/sites/emg-quality/sd/emg-

bms/esd%20control%20docs/esd_control_manual%20-%20epsg1039112.pdf

g) Handling and storage of product will be determined by the local area, but will include

identification, packaging, and proper protection of product.

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 24 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

h) Hardware Test Centers exist within EMG to provide environmental testing, failure analysis

services, and regulatory compliance expertise that enable our partners in R&D, Manufacturing,

and Marketing to design and deliver products which meet our trade customers' quality

requirements. This function may reside in OF or a Division.

8.4 Delivery (7.5.1, 7.5.5, 8.2.1)

Delivery is an important part of the overall BMS and assures the product is packaged and shipped

appropriately meeting EMG quality/delivery standards and customer expectations. An EMG On

Time Arrival (OTA) team focuses on achieving OTA goals. The purpose of the EMG On Time

Arrival Corrective Action and Management Review system is to establish a quality improvement

environment that is responsive to EMG‟s promise to customers. The approach is to establish

corrective action ownership, provide consistent data, and establish management reviews.

8.4.1 Shipping (7.5.5)

Pack: Pack instrument and accessories according to customer order/requirements. The

Environmental Test Manual outlines several requirements for packaging.

a) Shipping Logistics: Plan and manage worldwide shipping logistics to meet customer

requirements.

8.4.2 Management of customer Complaints: OBD, OTA, OTS: (8.2.1)

Improvements to product and production processes may be initiated in response to information

gained from customer feedback.

a. The OBD (Out-of-Box Defect) system provides information that is analyzed for patterns and

trends in order to prioritize areas for further investigation. Changes to product or process may

be implemented within Order Fulfillment along with involvement from other areas of the

business as required.

b. On Time Arrival (OTA): EMG measures the OTA for all EMG products. The results are

monitored in the EMG monthly Bluebook.

c. On Time Shipment (OTS): http://qes.supplychain.agilent.com/OTD_Metrics/OTD_metrics.asp

EMG measures the OTS for all EMG products. The results are monitored in the EMG monthly

Bluebook.

8.5 New Product Introduction (NPI)/Engineering Support (7.3, 7.3.4, 7.5.1, 8.2.3, 8.2.4)

EMG‟s OF strategy is to have once centralized manufacturing center with a number of smaller

regional Divisions based NPI OF sites. These NPI sites provide New Product Development and

Introduction support for the centralized OF.

Primary Roles: Division NPI OF organizations provides the critical, dynamic, new product

development and introduction linkages between EMG‟s product development labs and centralized

manufacturing. This is a collaborative role that includes influencing product design, and supply

chain design decisions to optimize business results and meet current and future product

development requirements. Specific activities may include validating design performance, providing

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 25 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

rapid prototyping, characterization and qualification testing, and ensuring smooth new product

introductions and production ramp up execution.

Division NPI OF organizations also provide a business management/leadership linkage between

the Divisions (R&D, Marketing, and Product Planning), it is co-located with, and the manufacturing

center that produce the Division‟s products. This business linkage ensures Division activities link

successfully with Order Fulfillment.

a) NPI‟s & Transfers (7.3, 7.5.1, 7.3.4)

Manage the introduction of new products into manufacturing environment.

Coordinate with Division and Division-OF entities.

b) Engineering /Production Support (8.2.3, 8.2.4)

Provide support for Test Systems (including Test S/W and Measurement

Traceability), Production Processes and Technical Investigations.

c) Customer Feedback – CA/PA (8.5.2, 8.5.3)

Investigate and implement corrective and preventative actions to products in

production phase.

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 26 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

9. Customer Satisfaction

Customer Satisfaction is meeting customers‟ quality, delivery, pricing and features requirements.

Quality is more than hardware reliability. It is all about the customer‟s total experience in interacting

with our products, people, partners, and agents. It is the sum of these interactions over time that

determines customer loyalty.

9.1 Service Solutions Unit (SSU) (7.5.1, 7.5.2, 7.5.3, 7.6)

The Service Solutions Unit‟s mission is to build customer value and intimacy through support services and

solutions. These either extend the usefulness and product life of hardware products, or are unique services

such as consulting and training that provide a whole product solution for the customer

There are two separate entities in SSU from an operational perspective to better serve customers. The SSU

organization will focus on business development, marketing and R&D customer and planning issues while the

SSU SDO, Service Delivery Operation delivers calibration/repair services and parts to EMG business and

trade customers.

9.1.1 Repair: (7.5.3, 7.5.1)

Repair is composed of a number of related processes that return a hardware product back to useful service.

The overall repair process includes sub-processes such as cleaning and safety testing, and information

services such as Service Notes.

http://emg.communications.agilent.com/wcss/internalpages/svcnotes/index.htm

An overall process map is available at: http://bench.service.agilent.com/ (Not applicable to MSD and ASPL)

Examples of key metrics: Turn-around Time (TAT), Ship on time (SOT).

MSD and ASPL provides on-site support (repair and calibration and delivery (site preparation and

installation)) and remote phone technical support to customer.

9.1.2 Calibration: (7.6)

Calibration is the set of operations that establishes, under specified conditions, the relationship between

values indicated by a measuring instrument or measuring system, and the corresponding standard or known

values derived from the standard. The benefit to the customer is to assure that an instrument is operating

within the measurement specification design parameters. Examples of key metrics: TAT and SOT.

The process of calibration is defined in related documents:

EMG Calibration System Manual (includes control of subcontracted calibration section 4.5,

supplier selection.

Audit Program Description

Metrology Policy Manual

Calibration is sometimes a separate step within the repair process and is embedded in the

following production flow diagram located at: http://bench.service.agilent.com/

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 27 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

9.1.3 Service Parts Operation

The Service Parts Operation works to provide EMG business & trade customers with support parts

to repair customer‟s equipment in a cost effective timely manner with minimum asset levels. SPO

worldwide operations include the functions of 1) Request Management, 2) Planning, 3)

Procurement, and 4) Logistics. MSD manages its own service parts operation and leverages the Global

Service Parts Operation processes.

http://ssuweb.business.agilent.com/SSUQuality/SPO/

9.1.4 Business Planning

SSU business planning provides leadership for Business Development, Marketing and R&D for on-

site/mobile cal, meeting customer needs and the development of new products and services.

9.2 Application Engineering Organization (AEO)

EMG offers a flexible range of engineering, training and technical support services specifically

designed to help customers optimize the use of their EMG equipment. We can help them get

started with their new instrument, provide out-of-warranty agreements for technical phone support,

provide continued custom assistance with the optimization of their existing instruments, provide

training based on their specialized requirements, and more. We help customers achieve their

application and measurement goals.

These services can be provided in a variety of ways: face-to-face at the site, remote (via phone and

web collaboration), or through self-guided tutorials. More information about these services is

available:

For Product and Application Services: www.agilent.com/find/consulting

For Education Services: www.agilent.com/find/education

For Technical Support Agreements and contact numbers: www.agilent.com/find/techsupport

9.3 Professional Services & Support

ASPL is in the business of highly distributed monitoring and Quality of Services Solutions focused

on big Telecom operators WW. This business requires specific professional services, such as

project management, deployment & commissioning, acceptance testing and high availability

reactive and proactive support.

9.4 Remarketing Solutions Division (RSD) (6.3c)

RSD is a unit within the Electronic Measurement Group. RSD provides Demo Services for EMG,

Remanufacturing of Demo, Trade-In and Sourced Products and manages the Trade-In/Trade-Up

Program for EMG. Organizationally, the RSD is divided into functional areas: Business

Development / Sourcing, Marketing, Supply Chain, Channel Partners, TQM and Demo. RSD

financial and operational metrics are reviewed on a monthly basis by the management team.

RSD utilizes some 3rd party providers. RSD uses a 120 Day Calibration policy (Products can be

shipped with Calibration Certificates at 120 days or less) (ISO9001:2008 exceptions: 7.3, 7.5 &7.6).

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 28 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

RSD Home Page web site: http://emg.communications.agilent.com/rsd/

• Remanufacturing is an operation that refurbishes customer pre owned, EMG Demo and factory

used products. Remanufacturing has three channels to sell inventory: Direct sales, Alternate

Channel and scrap mitigation.

• Trade Up is a program that allows EMG customers to leverage a currently owned product for

credit towards a new EMG unit or service. The RSD acts as a facilitator between the EMG sales

force and the original manufacturing division. The pre owned unit traded in by the customer is

disposed of through RSD„s Remanufacturing operations. Trade up web site:

http://tradeup.sales.agilent.com/

• Demo is an organization within RSD that supports sales of EMG products by providing

demonstration units to EMG Sales Representatives (FE, AE, SE) and Distributors.

9.5 Customer Surveys (8.2.1, 8.4)

Survey of EMG Customers is based on the most recent interaction with regional “Touch Points”

(i.e., Business Center, Contact Center, Sales, Service & Support, and Web). EMG has a web based

survey where the Customer can either provide a rating score, select from multiple choices or enter

a comment (verbatim). EMG: http://emg.communications.agilent.com/quality/acs/default.asp

Agilent Customer Satisfaction (ACS) program: Agilent Customer Satisfaction is a customer

satisfaction measurement and improvement program consistent across Agilent business, regions

and touch points. ACS implements an actionable metrics model to track and improve Agilent

Customer Satisfaction (ACS) performance. This includes setting a company-wide metric for

customer satisfaction, setting visible goals to continually improve customer satisfaction, and

monitoring and rewarding improvement.

Agilent: http://customer.quality.agilent.com/customer_satisfaction/acs.shtml

9.6 Customer Feedback (4.1e, 5.62b, 7.2.3c, 8.2.1, 8.4)

9.6.1 The Customer Feedback System provides customer satisfaction and future opportunity

information to EMG regarding product, service, and support offerings. A variety of processes and

tools (Customer Feedback System, Customer visit reports, surveys, etc.) are used to meet the

diverse needs of the organizations within EMG.

Each organization is required to:

 Document customer feedback received (solicited and unsolicited)

 Take appropriate follow-up action on feedback

o Redirect operational issues requiring immediate response to the appropriate

business process.

o Direct all other feedback to the responsible action/process owner for review, follow-

up and disposition.

 Include feedback in their processes to identify systemic customer satisfaction issues and

new product, service, and support opportunities.

 Include Customer Feedback as an input for the local management review.

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 29 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

Feedback may be submitted using one of the following methods:

 Customer Issue Resolution Process (CIR)

 The Customer Feedback web site: http://emg.communications.agilent.com/quality/voc/

 Email: Customer-feedback,EMG

 Voice Mailbox: (719) 590-3855 or Telnet 590-3855

9.6.2 EMG Quality Blue Book (4.1e, 8.4): Provides data about EMG‟s quality performance from our

customers‟ perspective where feasible. It is designed to measure areas which affect customers‟

perception regarding EMG‟s quality. Multiple levels of management review the Quality Blue Book

quarterly to understand EMG‟s overall quality trends to make improvements as appropriate.

EMG Quality Blue Book web site: http://intuition.is.agilent.com/bluebook/Default.aspx

9.6.3 Out of Box defect (OBD): (4.1.e, 8.4)

An OBD is a Performance or Non-performance defect found when the customer opens the box and

turns on the product. Customers expect products to conform to quality expectation and expect the

product to turn on the first time.

Customer reliability expectations: 1) Out of box experience, where Agilent‟s reputation can be

questioned, 2) Early lifetime, where the specific product‟s quality is in doubt, 3) Warranty period,

where reliability perceptions are developed, and 4) Post-warranty period, where service delivery is

measured.

9.7 Escalations and Customer Issue Resolution (8.2.1)

CIR (Customer Issue Resolution)

EMG's worldwide Customer Issue Resolution (CIR) process focuses on resolving cross-

organizational customer issues. Timely and effective customer issue resolution is an important

aspect in building customer satisfaction and in sustaining Agilent‟s position as the premier

measurement company. The CIR process was implemented worldwide on February 1, 2007 to

provide a simplified common tool to report and resolve cross-organizational customer issues.

CIRF is a web or Outlook based form that is available to all EMG employees. CIRF provides an

easy way to: Report a customer problem, provide customer feedback/compliment, Request an

escalation, Request a 2nd Level Escalation, and ask for assistance when you don't know where to

go for help.

Key elements of CIR:

 Common Process: The field, divisions and SSU will use the CIR process.

 Single Entry Point: CIRF (Customer Issue Reporting Form) will be the primary input tool for front-line

employees.

 One Platform: Siebel will be the sole content management system.

 Single Point of Contact: Each organization has one single point of contact (a specific person, not an email

node).

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 30 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

 Containment Plan Required for Escalations: In addition to initial response time to the issue submitter, a

containment plan is now required.

 95% of All Escalations Contained Within 7 Working Days or Less.

9.7.1 The Presidents line: Respond to customers that make complaints to Agilent‟s CEO or a

member of his staff when previous channels used to attempt to resolve the issue have been

either unsatisfactory or unknown to the customer. The Presidents line gives appropriate,

timely responses and follow-up to customer issues and all are treated in a manner that is

respectful and consistent with Agilent corporate objectives. This information provides

visibility to problems so Agilent Technologies can drive process improvement.

Unless a specific resolution plan and milestones negotiated with the customer are in place, it

is expected that the issues will be resolved within 10 working days.

9.7.2 Delivery Escalation Process: The purpose of this process is to avoid customer satisfaction

issues and to ensure the order is delivered as per the correct process. This process will help

manage, prioritize order delivery activities.

9.7.3 Internal escalations: are defined at the entity/business level.

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 31 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

10. Abbreviations used in this manual

List

Examples

ACS

Agilent Customer Satisfaction (Survey)

AEO

Application Engineering Organization

BMS

Business Management System

BMSM

Business Management System Manager

Business Unit

Business Manual

EMG Business Management Systems Manual

CCC

Customer Contact Centers

CIRF

Customer Issue/Input Reporting Form

Comms

Communications

CPI

Continual Process Improvement

Commercial Services

CSG

Communications Solutions Group

DFx

Design for everything

Divisions

Product focused with detailed product definition and a deeper view of the product to meet customer

needs.

ECO

Engineering Change Order

ECR

Engineering Change Request

ELT

Executive Leadership Team reporting to GM

Entity Specific Documents

Quality Procedure Manual

EMG

Electronic Measurements Group

ERP

Enterprise Resource Planning: an automated planning system (Oracle)

ESD

Electro Static Discharge

General Manager

HTC

Hardware Test Center

Knowledge Portal: a documentation vault

Local Processes

Process Documentation

Marketing

Market focus with a system approach, broader view of customer need.

MRP

Management Review Process

MST

Manufacturing Special Test

MTLS

Materials

NPI

New Product Introduction

OBD

Out of Box Defects

Order Fulfillment

OTA

On Time Arrival

OTS

On Time Shipment

QIC

Quality Improvement Cycle

Records

Training records, minutes, contracts etc.

Required Documents

Internal Audit Process, Management Review, etc.

RFI/P

Request for Information, Request for Proposal

RIP

Reliability Improvement Process

ROQ

Renaissance of Quality

RSD

Remarketing Solutions Division

SAP

South Asia Pacific

SPO

Service Parts Organization

TAT

Turn around time

TIS

Technical Information System

VOC

Voice of the Customer

WCSS

Worldwide Customer Service & Support

Webdoc

A web based tool providing a consistent document configuration management tool.

World Wide

WWMat

World Wide Materials

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 32 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

Document Control Log

REV

NO.

CHANGE SUMMARY

DOCUMENT

OWNER

APPROVER

DATE

APPROVED

As issued.

Diana Clark

Jim Horner

Oct. 1, 2002

Updated URL‟s for Disaster Recovery, Common Processes, page 11

Updated URL‟s for Design and Mfging Processes and ESD Page 21

Diana Clark

Jim Horner

Oct 7, 2002

Updated Customer Property req.

Diana Clark

Jim Horner

Oct 8, 2002

Changed SGDU to DAT & WCS, updated Material Purchasing.

Diana Clark

Jim Horner

Oct 21, 2002

Updated section 4.7 EHS

Diana Clark

Jim Horner

Oct 28, 2002

Updated Agilent ESD Web Site

Changed KSO to be included in the cert.

Updated Procurement process

Diana Clark

Jim Horner

Nov 14, 2002

Clarified support versus supplier within Agilent Technologies, page 4

Diana Clark

Jim Horner

Nov 22, 2002

Added copyrights and deleted “public”

Diana Clark

Jim Horner

Dec 9, 2002

Updated Commercial Services process

Diana Clark

Jim Horner

Jan 22, 2003

Added Product Stewardship information section 6.0 b

Diana Clark

Jim Horner

Feb 13, 2003

Changed QMS to BMS, Changed PGU to Division

Diana Clark

Jim Horner

Mar. 17, 2003

Updated Commercial Services and added infrastructure organization

heading

Diana Clark

Jim Horner

Mar. 31, 2003

Updates resulting from organization changes

Diana Clark

Jim Horner

May 2, 2003

Updated FSU process

Diana Clark

Jim Horner

May 7, 2003

Updated Quality Education, & Custom Solutions, & moved FSU to

Customer Solutions.

Diana Clark

Jim Horner

June 4, 2003

Updated GTLS to SPO, updated FSU URL

Diana Clark

Jim Horner

June 13, 2003

Update URL‟s for FSU, HR & Oracle documentation, deleted GSDC,

added AES, updated Marketing and Materials sections.

Diana Clark

Jim Horner

July 18, 2003

Update Strategic Planning and FSU, deleted OF website, updated OBD

website information in 8.4, Added MAST and Eesof URL‟s

Diana Clark

Jim Horner

July 25, 2003

Fixed page breaks

Diana Clark

Jim Horner

July 30, 2003

Fixed pagination again

Diana Clark

Jim Horner

Aug 1, 2003

Fixed pagination once again, updated scope

Diana Clark

Jim Horner

Aug 6, 2003

Fixed pagination again

Diana Clark

Jim Horner

Aug 8, 2003

Fixed pagination (I hope)

Diana Clark

Jim Horner

Aug 8, 2003

Updated 2.1 adding Senior VP‟s role

Diana Clark

Jim Horner

Aug 12, 2003

Updated Customer Feedback 9.6, Updated Materials Purchasing

information 8.2.

Diana Clark

Jim Horner

Aug 20, 2003

Updated 9.2 KSO information

Diana Clark

Jim Horner

Aug 22, 2003

Updated 8.3 Manufacturing information about ESD, added Infrastructure

Website in 4.6.

Diana Clark

Jim Horner

Aug 28, 2003

Updated FSU 9.4, updated URL‟s

Diana Clark

Jim Horner

Sept 10, 2003

Updated Scope page 4.

Diana Clark

Jim Horner

Oct. 1, 2003

Commercial Services changes internal processes and changes business

name to Customer Contact Centers (section 7.2)

Diana Clark

Jim Horner

Oct. 10, 2003

Update table of contents, Updated GSO to SSO, Deleted AWARD, and

updated business map.

Diana Clark

Jim Horner

Nov. 7, 2003

Updated KSO to MAS, updated scope list and abbreviation list.

Diana Clark

Jim Horner

Dec. 18, 2003

Updated 9.6 CFS, 9.4 FSU and 2.3.l top management responsibilities

Diana Clark

Jim Horner

Jan. 23, 2004

Pagination issue

Diana Clark

Jim Horner

Jan. 26, 2004

Updated section 8.4 Delivery

Diana Clark

Jim Horner

Feb 19, 2004

Updated section 9.1 SSU, 7.1 Field Sales, updated URL‟s, aligned

Business Process Map, added order delivery escalation process

Diana Clark

Jim Horner

April 9, 2004

Update SSU information, and CCC information. Updated URL‟s, typos,

formatting and making the words clear for translation. Added outsourcing

information.

Diana Clark

Jim Horner

April 30, 2004

Update Materials Purchasing/Performance Evaluation 8.2.4, and the

scope table adding SQD.

Diana Clark

Jim Horner

June 2, 2004

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 33 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

REV

NO.

CHANGE SUMMARY

DOCUMENT

OWNER

APPROVER

DATE

APPROVED

Corrected formatting of section numbering, the number “10” appeared

erroneously throughout the document.

Diana Clark

Jim Horner

June 4, 2004

Moved the ERP/Oracle information under 4.6.3 Information Technology,

cleaned up typo‟s throughout, added clarity to 4.2.1, 4.2.2. Added

Engineering Services to the scope on page 4.

Diana Clark

Jim Horner

June 29, 2004

Updated Materials 8.2.1, 8.2.4, updated the scope page 4.

Diana Clark

Jim Horner

July 9, 2004

Updated FSU 9.4, updated TQRDCE URL path 8.2.4 and updated the

scope on page 4.

Diana Clark

Jim Horner

July 23, 2004

Updated FSU 9.4 URL‟s

Diana Clark

Jim Horner

July 29, 2004

Updated section 3.0 relationship map

Diana Clark

Jim Horner

Aug 5, 2004

Updated customer property 4.1.4 and escalations 9.7.

Diana Clark

Jim Horner

Oct 1, 2004

Fixed broken link

Diana Clark

Jim Horner

Oct 4, 2004

Update ULR for escalation 9.7

Diana Clark

Jim Horner

Oct 21, 2004

Fixed typo on front page

Diana Clark

Jim Horner

Oct 28, 2004

Added CSTC to scope

Diana Clark

Jim Horner

Nov 5, 2004

Updated 9.2: MAS changed their name to AEO

Diana Clark

Jim Horner

Nov 19, 2004

Updated 9.4: FSU change their name to RSD (Remarketing Solutions

Division)

Diana Clark

Jim Horner

Dec. 8, 2004

Added Agilent Risk Management information (4.1.5)

Diana Clark

Jim Horner

Jan. 6, 2005

Updated section 8.2.4 Performance Evaluation.

Diana Clark

Jim Horner

Jan. 18, 2005

Added EMG TAG structure and BMS Rep.

Diana Clark

Jim Horner

Jan. 24, 2005

Updated broken links

Diana Clark

Jim Horner

Feb. 11, 2005

Updated the section 1.3 scope to align business reorganization (deleted

GSBU, added AIBU), added Six Sigma information, updated MR

requirements section 2.3.

Diana Clark

John Herniman

April 22, 2005

Updated MR requirements section 4.3 fixed numbering of document,

updated scope in section 1.4.

Diana Clark

John Herniman

June 13, 2005

Deleted GSBU

Diana Clark

John Herniman

June 17, 2005

Updated section 9.1.4

Diana Clark

John Herniman

June 20, 2005

Updated RSD

Diana Clark

John Herniman

June 23, 2005

SBM&D update section 8.2

Diana Clark

John Herniman

July 25, 2005

Deleted DAT, changed PMT to NMD, updated Packaging and Blue Book

web sites.

Diana Clark

John Herniman

Aug. 12, 2005

Updated to reflect organizational change EPSG- EMG and updated

URL‟s.

Diana Clark

John Herniman

Sept. 9, 2005

Updated URL‟s and updated TSO business name.

Diana Clark

John Herniman

Dec. 20, 2005

Updated section 4.5, page 15: TIS

Diana Clark

John Herniman

Dec. 20, 2005

Updated section 4.2.2 discontinuance

Diana Clark

John Herniman

Jan. 10, 2006

Updated 9.7.2 Ned line to ECAG

Diana Clark

John Herniman

Jan. 11, 2006

Updated 9.1.4 Business Planning for SSU

Diana Clark

John Herniman

Jan. 11, 2006

Added the corporate discontinuance process URL at 4.2.2.

Diana Clark

John Herniman

Jan. 25, 2006

Updated EPSG to EMG, deleted MIBU, Change AIBU to EIBU.

Diana Clark

John Herniman

March 8, 2006

Typo‟s fixed

Diana Clark

John Herniman

March 8, 2006

Fixed pagination

Diana Clark

John Herniman

March 9, 2006

Added CIRF to 9.7, updated URL in footer, updated table of contents,

and updated 2.3i Quality Objectives.

Diana Clark

John Herniman

April 14, 2006

Updated URL in 8.3e

Diana Clark

John Herniman

April 18, 2006

Updated URL in the footer, updated typos and formatting throughout the

document.

Diana Clark

John Herniman

April 28, 2006

Updated URL 9.7.3, updated 9.1.4 URL.

Diana Clark

John Herniman

May 3, 2006

Updated section 7.2 CCC

Diana Clark

John Herniman

May 25, 2006

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 34 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

REV

NO.

CHANGE SUMMARY

DOCUMENT

OWNER

APPROVER

DATE

APPROVED

Updated section 8.2.2 to clarify supplier management requirements

updated 2.2 org chart, updated 1.4 scope and fixed a few typo‟s.

Diana Clark

John Herniman

June 20, 2006

Updated section 9.7.3 by adding the ECAG/BillLine overview

presentation URL

Diana Clark

John Herniman

June 28, 2006

typo

Diana Clark

John Herniman

June 28, 2006

Updated to include ASD and MSD BMS information. Updated 9.7.4 URL

delivery escalation, updated the Process Map 3.1.c. Updated 1.4 scope,

and updated 2.1.e organization.

Diana Clark

John Herniman

July 27, 2006

Added Signal Network Division. Updated the URL for packaging (8.4.1).

Diana Clark

John Herniman

August 14, 2006

Updated 9.4 RSD

Diana Clark

John Herniman

August 22, 2006

Updated the core document links in section 4.1.5

Diana Clark

John Herniman

Sept. 1, 2006

Updated the GRS URL at 4.1.5

Diana Clark

John Herniman

Sept. 13, 2006

Updated section 8.2 Procurement

Diana Clark

John Herniman

Dec. 8, 2006

Updated section 8.2 Procurement

Diana Clark

John Herniman

Dec. 8, 2006

Update section 8.2 Procurement by fixing typo

Diana Clark

John Herniman

Dec. 11, 2006

Added clarity to section 9.1.3 regarding MSD. Added information about

the HTC in 8.3. Updated broken links.

Diana Clark

John Herniman

Dec. 15, 2006

Updated Webdoc again due to corruption error in Webdoc

Diana Clark

John Herniman

Dec. 20, 2006

Updated 8.2 Procurement, and updated 1.4 Scope

Diana Clark

John Herniman

Jan. 5, 2007

8.2.4 added technology, updated URL‟s and added clarity to section 2.3

top management

Diana Clark

John Herniman

Jan. 16, 2007

7.2 updated CCC information and updated table of content

Diana Clark

John Herniman

Feb. 13, 2007

8.3-f updated ESD Control requirements information, and updated 9.7.3

changing the name from ECAG to Presidents Line. 6.1 Update QSO

website and deleted the reference to 7.1

Diana Clark

John Herniman

March 23, 2007

Updated 9.7 escalations deleting Presto, updated CIR information,

updated 1.4 scope for NMT

Diana Clark

John Herniman

July 1, 2007

Updated section 1.4 scope, updated links, updated RSD information

Diana Clark

John Herniman

Aug 8, 2007

Updated 4.1.2 Quality Education, updated 4.2.1 Acquisition life cycle,

updated EMG org chart page 6

Diana Clark

John Herniman

Sept. 28, 2007

Updated & added URL‟s/links, update section 1.4 Scope, added Anti-

virus requirements document, Deleted AES Infrastructure.,

Diana Clark

John Herniman

April. 14, 2008

Updated 4.2.2 EMG Discontinuance URL

Diana Clark

John Herniman

April. 16, 2008

100

Updated URL‟s, updated SBM to SSM in section 8.2, Updated 9.4 RSD,

and updated 1.4 Scope.

Diana Clark

Eric Taylor

June 8, 2008

101

Changed Everest to Oracle, added CIRF update to section 9.7 and 4.1.5,

linked the new DAMDoc list. Updated 2.1 and updated ASD to ASPL.

Diana Clark

Eric Taylor

July 8, 2008

102

Added IT Disaster Recovery website, added OTA and OTS and deleted

OTD in section 8.4.2 b/c.

Diana Clark

Eric Taylor

Oct 24, 2008

103

Updated 4.2.1b to include a link to the Acquisition Standard, cleaned up

some OTA information and updated the EMG BMS Manager reporting as

dotted line.

Diana Clark

Eric Taylor

Oct 28, 2008

104

Updated 1.4 scope to align the latest reorg for NPMD and NMD

Diana Clark

Eric Taylor

Dec. 9, 2008

105

Added section 7.3 Customer Data

Diana Clark

Eric Taylor

Jan. 8, 2009

106

Updated the scope section by adding WWFO as certified, updated

section 7.3 Customer Data information and updated ISO9001:2000 to

ISO9001:2008.

Diana Clark

Eric Taylor

Mar. 20, 2009

107

Updated the footer regarding public use of this document and updated

the copy write year as required

Diana Clark

Eric Taylor

Mar. 30, 2009

108

Updated the scope to align with the organization change

Diana Clark

Eric Taylor

April 23, 2009

109

Updated section 1.4 removing ISO9001:2000 and adding ISO9001:2008,

update section 2.2 to align with the org change.

Diana Clark

Eric Taylor

April 24, 2009

110

Updated document owner name. Removed reference to WBU in Section

4.2.4. Changed TLO to TSO in list of ISO9001 certified businesses

(section 1.4). Reworded section 4.4 (changed we/our to EMG). Updated

Section 7.2 (CCC). Updated ISO9001:2008 reference in Section 4.6.

Edited by Alex Guzman.

Alex Guzman

(BMS Team)

Ted Tucker

31-Aug-2009

  

EMG Business Management System Manual

Doc # epsg1026386

Rev. 112

Page 35 of 35

The user of any printed copy of this controlled document is responsible for verifying it is the correct version prior to use. Hard copies are uncontrolled.

This manual contains links to subordinate documents that are restricted to Agilent personnel only

and may not work if accessing this document from a public site.

The current version is available at the EMG Document Map website: http://emg.communications.agilent.com/quality/bms/040318_docMap.asp

REV

NO.

CHANGE SUMMARY

DOCUMENT

OWNER

APPROVER

DATE

APPROVED

111

Deleted list of businesses certified to ISO9001 in Section 1.3 (Scope)

and Quality Standards Ownership Matrix (Section 3.2). Reformatted

header/footers. Included TLO in Section 4.2.3 (Technology

Development). Fixed broken URLs. Updated Org Chart descriptions

(Section 2). Edited by Alex Guzman.

Alex Guzman

(BMS Team)

Ted Tucker

24-Sep-2009

112

Updated Document and Fixed Broken Links. Addressed DEKRA NC by

referencing EMG OF as part of AOF. Changed wording to aid clarity in

section 9.6 related to an old system CASPER.

Section 8 updated to reflect relationship between AOF and EMG OF.

Section 2.2 Org Chart updated.

Section 4.2. Revised wording related to Infrastructure Org roles and

responsibilities

Kevin Fawl

(BMS Team)

Ted Tucker

13-Nov-12

Agilent Technologies Scanner Epsg1026386 Users Manual

epsg1026386 to the manual d936162a-fd58-45d2-8f48-fc4f74aa6293

Navigation menu

Versions of this User Manual:

Views

Navigation