Agilent Technologies Water Dispenser 8591E Users Manual 5963 6909e

8596E to the manual e33a60eb-27b3-4398-bbb2-90f9c208e3a1

2015-02-02

: Agilent-Technologies Agilent-Technologies-Agilent-Technologies-Water-Dispenser-8591E-Users-Manual-413557 agilent-technologies-agilent-technologies-water-dispenser-8591e-users-manual-413557 agilent-technologies pdf

Open the PDF directly: View PDF .
Page Count: 7

These specifications apply to the Agilent

Technologies 8591E, 8593E, 8594E, 8595E, and

8596E spectrum analyzers.

Specifications

All specifications apply over O°C to +55°C. The

analyzer will meet its specifications after 2 hours

of storage at a constant temperature, within the

operating temperature range, 30 minutes after the

analyzer is tumed on, and after CAL FREQ and

CAL AMPTD (and for the 8593E, 8595E, and

8596E CAL YTF) have been run.

Frequency Specifications

Frequency Range

8591E

50 Ω9 kHz to 1.8 GHz

75 Ω1 MHz to 1.8 GHz

8593E 9 kHz to 22 GHz

Option 026/027 9 kHz to 26.5 GHz

Band LO harmonic = N

0 1 9 kHz to 2.9 GHz

1 1 2.75 GHz to 6.5 GHz

2 2 6.0 GHz to 12.8 GHz

3 3 12.4 GHz to 19.4 GHz

4 4 19.1 GHz to 22.0 GHz

4 4 (Opt. 026/027) 19.1 GHz to 26.5 GHz

8594E

dc coupled 9 kHz to 2.9 GHz

ac coupled 100 kHz to 2.9 GHz

8595E

dc coupled 9 kHz to 6.5 GHz

ac coupled 100 kHz to 6.5 GHz

8596E

dc coupled 9 kHz to 12.8 GHz

ac coupled 100 kHz to 12.8 GHz

Band LO harmonic = N

0 1 9 kHz to 2.9 GHz (dc coupled)

0 1 100 kHz to 2.9 GHz (ac coupled)

1 1 2.75 GHz to 6.5 GHz

2 2 6.0 GHz to 12.8 GHz

Frequency Reference (Opt. 004)

Aging ±2 x 10-6/year ±1 x 10-7/year

Temperature Stability ±5 x 10-6 ±1 x 10-8

Initial Achievable Accuracy ±0.5 x 10-6 ±2.2 x 10-8

Agilent 8590 E-Series

Portable Spectrum Analyzers

Data Sheet

Frequency Readout

Accuracy

(Start, Stop, Center, Marker) ±(frequency readout x frequency

reference error1+span accuracy +1%

of span +20% of RBW+100 Hz x N*)

Marker Count Accuracy

Frequency Span

≤10 MHz x N* ±(marker frequency x frequency

reference error1+ counter resolution

+100 Hz x N*)

Frequency Span ±(marker frequency x frequency

>10 MHz x N* reference error1+ counter

resolution +1 kHz x N*)

Counter Resolution

Frequency Span

≤10 MHz x N* Selectable from 10 Hz to 100 kHz

Frequency Span

>10 MHz x N* Selectable from 100 Hz to 100 kHz

Frequency Span

Range 0 Hz (zero span), and

Opt. 130 Std.

Min. Min. Max

(KHz) (KHz) (GHz)

8591E 1 10 1.8

8593E 1 x N* 10 x N* 19.25

8594E 1 10 2.9

8595E 1 10 6.5

8596E 1 x N* 10 x N* 12.8

Resolution Four digits or 20 Hz x N*

whichever is greater

Accuracy

Span ≤10 MHz x N* ±2% of span

Span >10 MHz x N* ±3% of span

Frequency Sweep Time

Range

Span = 0 Hz, >1 kHz 20 ms to 100 s

Span = 0 Hz (Opt. 101) 20 µs to 100 s

Accuracy

20 ms to 100 s ±3%

20 µs to <20 ms (Opt. 101) ±2%

Sweep Trigger Free run, single, line, video,

external

Resolution Bandwidth 1 kHz to 3 MHz (3 dB) in 1-3-10

sequence.

9 kHz and 120 kHz (6 dB) EMI

bandwidths.

Option 130 Adds 30, 100, and 300 Hz (3 dB)

bandwidths and 200 Hz (6 dB) EMI

bandwidth.

Accuracy ±20%

Selectivity (Characteristic)

–60 dB/–3 dB

3 kHz to 10 kHz 15:1

100 kHz to 3 MHz 15.1

1 kHz, 30 kHz 16:1

–40 dB/–3 dB

30 Hz to 300 Hz 10:1

Video Bandwidth Range 30 Hz to 1 MHz in 1,3 sequence

1 Hz to 1 MHz (Opt 130)

Stability

Noise Sidebands (1 kHz RBW, 30 Hz VBW and sample detector)

>10 kHz offset from CW signal ≤–90 dBc/Hz + 20 Log N*

>20 kHz offset from CW signal ≤–100 dBc/Hz + 20 Log N*

>30 kHz offset from CW signal <–105 dBc/Hz + 20 Log N*

Residual FM

8591E

1 kHz RBW, 1 kHz VBW ≤250 Hz pk-pk in 100 ms

30 Hz RBW, 30 Hz VBW ≤30 Hz pk-pk in 300 ms

8593E, 94E, 95E, 96E

1 kHz RBW, 1 kHz VBW ≤(250 x N*) Hz pk-pk in

100 ms

30 Hz RBW, 30 Hz VBW ≤(30 x N*) Hz pk-pk in 300 ms

System-Related Sidebands

>30 kHz offset from CW signal ≤–65 dBc + 20 Log N*

Comb Generator Frequency

8593E, 96E I00 MHz fundamental

frequency

Accuracy ±0.007%

* N = LO harmonic. N = 1 for 91E, 94E, 95E

1. Frequency reference error = (aging rate x period of time since

adjustment + initial achievable accuracy + temperature

stability).

Amplitude Specifications

Amplitude specifications do not apply for Analog+

mode and negative peak detector mode except as

noted in “Amplitude Characteristics.”

Amplitude Range

Displayed average noise level

to +30 dBm

8591E (Opt. 001) Displayed average noise level to

+72 dBmV

Maximum Safe Input Level (input attenuator ≥10 dB)

Average Continuous Power +30 dBm (1 W)

8591E (Opt. 001) +72 dBmV (0.2 W)

Peak Pulse Power

8591E +30 dBm (1 W)

8591E (Opt. 001) +72 dBmV (0.2 W)

8593E, 94E, 95E, 96E +50 dBm (100 W) for < 10 µs pulse

width and <1 % duty cycle, input

attenuation ≥30 dB.

8591E 25 Vdc

8591E (Opt. 001) 100 Vdc

8593E 0 Vdc

8594E, 95E, 96E 0 V (dc coupled)

50 V (ac coupled)

Gain Compression

>10 MHz ≤0.5 dB (total power at input mixer2 = –10 dBm)

Displayed Average Noise Level

(Input terminated, 0 dB attenuation, 1 Hz/30 Hz VBW, sample-

detector)

8591E 30 Hz RBW 1 kHz RBW

400 kHz to 1 MHz ≤–130 dBm ≤–115 dBm

1 MHz to 1.5 GHz ≤–130 dBm ≤–115 dBm

1.5 GHz to 1.8 GHz ≤–128 dBm ≤–113 dBm

8591E (Opt. 001)

1 MHz to 1.5 GHz ≤–78 dBmV ≤–63 dBmV

1.5 GHz to 1.8 GHz ≤–76 dBmV ≤–61 dBmV

8593E

400 kHz to 2.9 GHz ≤–127 dBm ≤–112 dBm

2.75 GHz to 6.5 GHz ≤–129 dBm ≤–114 dBm

6.0 GHz to 12.8 GHz ≤–117 dBm ≤–102 dBm

12.4 GHz to 19.4 GHz ≤–113 dBm ≤–98 dBm

19.1 GHz to 22 GHz ≤–107 dBm ≤–92 dBm

8593E (Opt. 026/027)

19.1 GHz to 26.5 GHz ≤–102 dBm ≤–87 dBm

8594E

400 kHz to<5 MHz ≤–122 dBm ≤–107 dBm

5 MHz to 2.9 GHz ≤–127 dBm ≤–112 dBm

8595E

400 kHz to 2.9 GHz ≤–125 dBm ≤–110 dBm

2.75 GHz to 6.5 GHz ≤–127 dBm ≤–112 dBm

8596E

400 kHz to 2.9 GHz ≤–125 dBm ≤–110 dBm

2.75 GHz to 6.5 GHz ≤–127 dBm ≤–112 dBm

6.0 GHz to 12.8 GHz ≤–115 dBm ≤–100 dBm

Sensitivity 30 Hz RBW

Third Order Intermod

Second Order Distortion

100

–70 –60 –50 –40 –30 –20 –10 0 +10

19.1 TO 22 GHz

6.0 TO 12.8 GHz

400 kHz TO 6.5 GHz

12.4 TO 19.4 GHz

>2.75 GHz

Nominal Dynamic Range

Agilent 8593E (Option 130)

Mixer Level (dBm)

Dynamic Range (dB)

(30 Hz Res BW)

10 MHz to 2.9 GHz

2. Mixer Power Level (dBm) = Input Power (dBm) Input Atten. (dB)

Spurious Responses

Second Harmonic Distortion

5 MHz to 1.8 GHz (91E) <–70 dBc for –45 dBm tone at

input mixer.2

10 MHz to 2.9 GHz (93E) <–70 dBc for –40 dBm tone at

>10 MHz (94E, 95E, 96E) input mixer.2

>2.75 GHz (93E, 95E,96E) <–100 dBc for –10 dBm tone at

input mixer2(or below displayed

average noise level).

Third Order Intermodulation

Distortion

5 MHz to 1.8 GHz (91E) <–70 dBc for two –30 dBm tones

>10 MHz (93E, 94E, at input mixer2and >50 kHz

95E, 96E) separation.

Other Input Related Spurious

≤1.8 GHz (91E) <–65 dBc at ≥30 kHz offset, for

≤2.9 GHz (94E) –20 dBm tone at input mixer2

≤6.5 GHz (95E)

≤12.8 GHz (96E)

≤18 GHz (93E)

≤22 GHz (93E) <–60 dBc at ≥30 kHz offset, for

–20 dBm tone at input mixer2

Residual Responses (input terminated and 0 dB attenuation)

1 MHz to 1.8 GHz

(91E Opt. 001) <–38 dBmV

150 kHz to 1.8 GHz (91E) <–90 dBm

150 kHz to 2.9 GHz (94E) <–90 dBm

150 kHz to 6.5 GHz <–90 dBm

(93E, 95E, 96E)

Display Range

Log Scale 0 to –70 dB from reference level is

calibrated; 0.1, 0.2, 0.5 dB/division

and 1 to 20 dB/division in 1 dB steps;

eight divisions displayed.

Linear Scale Eight divisions

Scale units dBm, dBmV, dBuV, V, and W

Marker Readout Resolution 0.05 dB for log scale

0.05% of reference level for linear

scale

Fast Sweep Times for Zero Span (Opt. 101 or 301)

20 µs to 20 ms

≤1 GHz 0.7% of reference level for linear

scale

>1 GHz 1.0% of reference level for linear

scale

Reference Level

Range same as amplitude range

Resolution 0.1 dB for log scale, 0.12% of

reference level for linear scale

Accuracy ±0.3 dB @ –20 dBm

0 dBm to –59.9 dBm ±(0.3 dB +.01 x dB from –20 dBm)

Frequency Response (10 dB input attenuation)

8591E Absolute3Relative Flatness4

9 kHz to 1.8 GHz ±1.5 dB ±1.0 dB

8593E Preselector peaked in band > 0

Absolute3Relative Flatness4

9 kHz to 2.9 GHz ±1.5 dB ±1.0 dB

2.75 GHz to 6.5 GHz ±2.0 dB ±1.5 dB

6.0 GHz to 12.8 GHz ±2.5 dB ±2.0 dB

12.4 GHz to 19.4 GHz ±3.0 dB ±2.0 dB

19.1 GHz to 22 GHz ±3.0 dB ±2.0 dB

19.1 GHz to 26.5 GHz ±5.0 dB ±2.0 dB

8594E, 95E, 96E (dc coupled preselector peaked)

Absolute3Relative Flatness4

9 kHz to 2.9 GHz ±1.5 dB ±1.0 dB

2.75 GHz to 6.5 GHz ±2.0 dB ±1.5 dB

6.0 GHz to 12.8 GHz ±2.5 dB ±2.0 dB

Calibrator Output

Amplitude –20 dBm ±0.4 dB

8591E Opt.001 +28.75 dBmV ±0.4 dB

Resolution Bandwidth

Switching Uncertainty

(Referenced to 3 kHz RBW, at ref. level)

3 kHz to 3 MHz RBW ±0.4 dB

1 kHz RBW ±0.5 dB

30 Hz to 300 Hz RBW ±0.6 dB

Linear to Log Switching ±0.25 dB at reference level

Display Scale Fidelity

Log Maximum Cumulative

0 to –70 dB from reference level

3 kHz to 3 MHz RBW ± (0.3 + 0.01 x dB from reference

level)

30 Hz to 1kHz RBW ± (0.4 + 0.01 x dB from reference

level)

Log Incremental Accuracy ±0.4 dB/4 dB

0 to –60 dB from reference level

Linear Accuracy ±3% of reference level

3. Referenced to 300 MHz CAL OUT.

4. Ref. to midpoint between highest and lowest freq.

response deviations.

Option Specifications

Option 010 and 011 Tracking Generator

Frequency Range

8591E 100 kHz to 1.8 GHz

(Opt. 011, 75 Ω)1 MHz to 1.8 GHz

8593E, 94E, 95E, 96E 9 kHz to 2.9 GHz

Output Level

Range

8591E 0 to –70 dBm

8591E (Opt. 011) +42.8 to –27.2 dBmV

8593E, 94E, 95E, 96E –1 to –66 dBm

Resolution 0.1 dB

Absolute Accuracy

(@ 300 MHz, –20 dBm, +28.8 dBmV)

8591E ±1.0 dB

8593E, 94E, 95E, 96E ±0.75 dB

Vernier

Range

8591E 10 dB

8593E, 94E, 95E, 96E 9 dB

Accuracy

8591E ±0.75 dB

8593E, 94E, 95E, 96E ±0.5 dB

Output Attenuator

Range

8591E 0 to 60 dB, 10 dB steps

8593E, 94E, 95E, 96E 0 to 56 dB, 8 dB steps

Output Flatness

8591E ±1.75 dB

8593E, 94E, 95E, 96E

(>10 MHz) ±2.0 dB

Effective Source Match (Characteristic)

8591E 1.6:1 (10 dB attenuation)

8593E, 94E, 95E, 96E 1.5:1 (8 dB attenuation)

Spurious Output

Harmonic Spurs

8591E

(0 dBm, +42.8 dBmV output) <–25 dBc

8593E, 94E, 95E, 96E

(–1 dBm Output)

Nonharmonic Spurs

8591E <–30 dBc

8593E, 94E, 95E, 96E

300 kHz to 2.0 GHz ≤–27 dBc

2.0 GHz to 2.9 GHz ≤–23 dBc

Dynamic Range (Characteristic)

Dynamic Range5TG Feedthrough

8591E 106 dB ≤–106 dBm

8591E (Opt. 011) 100 dB ≤–57.24 dBmV

8593E (> 400 kHz) 111 dB ≤–112 dBm

8594E (> 400 kHz) 106 dB ≤–107 dBm

(> 5 MHz) 111 dB ≤–112 dBm

8595E (>400 kHz) 109 dB ≤–110 dBm

8596E (> 400 kHz) 109 dB ≤–110 dBm

Power Sweep

Range

8591E (–15 dBm to 0 dBm) –(source

attenuator setting)

8591E (Opt 011) (+27.8 to 42.8 dBmV)–(source

attenuator setting)

8593E, 94E, 95E, 96E (–10 dBm to –1 dBm)–(source

attenuator setting)

Resolution 0.1 dB

Option 103 Quasi-Peak Detector

Amplitude response conforms with Publication 16 of Comité

International Spécial des Perturbations Radioélectriques (CISPR)

Section 1, Clause 2.

Option 105 Time Gated Spectrum Analysis

Gate Delay

Range 1 µs to 65.535 ms

Resolution 1 µs

Accuracy ±(1 µs + 0.01% x Gate Delay Readout)6

(From Gate Trigger Input to positive edge of Gate Output)

Gate Length

Range 1 µs to 65.535 ms

Resolution 1 µs

Accuracy ±(0.2 µs + (0.01% x Gate Length

Readout))

(From positive edge to negative edge of Gate Output)

Additional Gate Amplitude Error7

Log Scale <2 µs ±0.8 dB

≥2 µs ±0.5 dB

General Specifications

Temperature Range

Operating 0°C to +55°C

Storage –40°C to +75°C

EMI Compatibility Conducted and radiated

interference CISPR Pub. 11

and Messempfaenger

Postverfuegung 526/527/79.

Audible Noise <37.5 dBa pressure and <5.0 Bels

power (ISODP7779)

5. Maximum output level minus TG feedthrough.

6. Up to 1 Vs jitter due to 1 µs resolution of gate delay clock.

7. With GATE ON enabled and triggered, CW Signal, Peak Detector Mode.

Power Requirements

ON (Line 1) 90 to 132 V rms, 47 to 440 Hz

195 to 250 V rms, 47 to 66 Hz

Power consumption <500 VA;

<180W

Standby (Line 0) Power consumption <7 W

User Program Memory 238 Kbytes non-volatile RAM

Data Storage (nominal)

Internal 24 traces or 32 states

External 50 traces, 8 states

Memory card (85700A) 32 Kbytes

lnputs/Outputs

Front Panel Connectors

Input 50 ΩType N

(Opt 001) 75 ΩBNC female

(Opt 026) APC 3.5 mm male

(Opt 027) 50 ΩType N female

Cal Output 50 ΩBNC, –20 dBm, 300 MHz

100 MHz Comb Out 100 MHz ±0.007%, SMA

Probe Power +15 Vdc, –12.6 Vdc, and Gnd

(150mA max each)

Rear Panel Connectors

Earphone (Opt 102 and 103) 1/8 inch monaural jack

LO Output (Opt 009) 50 ΩSMA Female, 3.0 to 6.8214 GHz

TV Trigger Output BNC, TTL levels, negative edge

(Opt 101 and 102) trigger after sync pulse

Gate Trigger Input (Opt 105) 50 ΩBNC, Pulsewidth >30 ns (TTL)

Gate Output (Opt 105) 50 ΩBNC (TTL)

SWEEP + Tune Output

(Opt 009) 2 k ΩBNC, 0 to +10V,

0.36V/GHz of CF

Ext. ALC Input 1 MW, –66 dBV to +6 dBV

Sweep Output BNC, 5 k W, 0 to +10 V ramp

High Sweep In/Out BNC, high TTL = sweep,

low TTL = Retrace

Aux Video Out 50 ΩBNC, 0-1 V Uncalibrated

Aux IF Output 50 ΩBNC, –10 to –60 dBm,

21.4 MHz

Keyboard (Opt. 041 or 043) 5 Pin mini-DIN, compatible with

HP C1405B and most IBM/AT key

boards

Ext. Trigger Input BNC, TTL levels, positive edge

trigger

GPIB and Parallel (Opt 041) SH1, AH1, T6, L4, ST1, RL1, PPO,

DC1, C1 C2, C3, & C28 and 25 Pin

subminature D-shell female for

parallel

RS-232 and Parallel (Opt 043) 9 Pin subminature D-shell female

and 25 Pin subminature D-shell

female for parallel

Ext Ref In 50 ΩBNC, 10 MHz, –2 to +10 dBm

10 MHz Ref Output 50 ΩBNC, 10 MHz, 0 dBm

Aux Interface 9 pin “D” subminiature

Pin 1-4, TTL Output

Pin 5 TTL Input

Pin 6 Gnd

Pin 7 –15 vdc ±5%; 150 mA max

Pin 8 +5 vdc ±5%; 150 mA max

Pin 9 +15 vdc ±5%; 150 mA max

Monitor Out 50 ΩBNC,

Selectable Format NTSC, 15.75 kHz, 60 Hz

PAL, 15.625 kHz, 50 Hz

Dimensions (Nominal)

(Without handle, feet, 163 mm (H) x 325 mm (W)

or cover) x 427 mm (D)

(Overall) 184 mm (H) x 373 mm (W)

X 461 mm (D)

Weight (Nominal)

8591E 15.4 kg (34 lb)

8593E 16.4 kg (36 lb)

8594E 16.4 kg (36 lb)

8595E 16.4 kg (36 lb)

8596E 16.4 kg (36 lb)

Related Literature Pub. Number

General Purpose Information

Agilent 8590L and 8592L

Product Overview 5962-7275E

Agilent 8590C/E/L and EM Series

Configuration Guide 5963-6858E

Agilent 8590 E-Series Brochure 5963-6908E

Product Feature Briefs

Analog + Display 5091-4054E

Transmitter Power Measurements

(ACP, OBW) 5091-4055E

Zoom Window 5091-4051E

Measuring AM with FFT 5091-4049E

Time Gated Spectrum Analysis 5091-4053E

Editing Keyboard 5091-4048E

Marker and Peaks Table 5091-4050E

Third Order Intermodulation,

N & B Bandwidth, and Percent AM 5091-4052E

Product Notes

Time-Gated Spectrum Analysis

(Agilent 8590-2) 5952-3685

Analog + Display 5091-2364E

Maximizing Accuracy in Noise Figure

Measurements (Agilent 85791-1) 5091-4801E

Application Notes

Spectrum Analysis Basics (150) 5952-0292

Amplitude and Frequency

Modulation (150)-1) 5954-9130

Agilent Technologies’ Test and Measurement

Support, Services, and Assistance

Agilent Technologies aims to maximize the value you receive,

while minimizing your risk and problems. We strive to ensure

that you get the test and measurement capabilities you paid

for and obtain the support you need. Our extensive support

resources and services can help you choose the right Agilent

products for your applications and apply them successfully.

Every instrument and system we sell has a global warranty.

Support is available for at least five years beyond the produc-

tion life of the product. Two concepts underlie Agilent’s

overall support policy: “Our Promise” and “Your Advantage.”

Our Promise

“Our Promise” means your Agilent test and measurement equip-

ment will meet its advertised performance and functionality.

When you are choosing new equipment, we will help you with

product information, including realistic performance specifica-

tions and practical recommendations from experienced test

engineers. When you use Agilent equipment, we can verify that

it works properly, help with product operation, and provide

basic measurement assistance for the use of specified capabili-

ties, at no extra cost upon request. Many self-help tools are

available.

Your Advantage

“Your Advantage” means that Agilent offers a wide range of

additional expert test and measurement services, which you

can purchase according to your unique technical and business

needs. Solve problems efficiently and gain a competitive edge

by contracting with us for calibration, extra-cost upgrades, out-

of-warranty repairs, and on-site education and training, as well

as design, system integration, project management, and other

professional services. Experienced Agilent engineers and tech-

nicians worldwide can help you maximize your productivity,

optimize the return on investment of your Agilent instruments

and systems, and obtain dependable measurement accuracy

for the life of those products.

Get assistance with all your test and measurement needs at:

www.agilent.com/find/assist

Product specifications and descriptions in this

document subject to change without notice.

Printed in U.S.A. 5/00

5963-6909E

Agilent Technologies Water Dispenser 8591E Users Manual 5963 6909e

8596E to the manual e33a60eb-27b3-4398-bbb2-90f9c208e3a1

Navigation menu

Versions of this User Manual:

Views

Navigation