Airsmart Technology 2A OTR metal portable FM radio & Bluetooth speaker User Manual
Shenzhen Airsmart Technology Co.,Ltd. OTR metal portable FM radio & Bluetooth speaker
User manual
Product Diagram Product Usage Power Source Power supply by inner rechargeable lithium polymer battery (3.7V/1000mA) Charge Plug in the USB socket on the back board with specialized charging cable (or other suitable cable), and connect with charger of 5V, current is greater than or equal to 500 mA. (See in picture 2, position 7 ), charging indicator is red, and will turn green when finished. Product Features FAQ for MUZEN OTR 1. Using specialized reception chip of high quality, special cable and circuit, and other professional circuit, its reception sensitivity and other performance become outstanding. 2. Adopting special electroacoustic design and adjust by professional tuner, the radio enjoys a excellent sound quality. 3. Retro design, mini size, nobility and elegance. Durability of OTR Battery On/Off (See in picture 1, position 3 ), power switch and function selection share the same knob, twist the knob to OFF means turn off, and turn to FM/BT/AUX start corresponding function. The knob can be twisted either clockwise or counter-clockwise. Technical Configuration 1. Frequency Scope: FM 87-108MHZ (Picture 1) Panel 1 Frequency Modulation (FM) 2 Frequency Scale 4 Volume Adjustment 5 Status Indicator 3 Switch for Power and Function Selection Charging of OTR OTR products are generally full charged within three hours, so please turn off the charger or pull out the charging line after charging for three hours. There’s an indicator on the left side of the charging port: red light means charging, green light means fully charged. OTR products have no standard charging adaptor, you can use cellphone charger of 5V (500mA-2AI), or plug in a PC USB interface. The inner 1000mAH lithium polymer battery has passed UN 38.3 test, with greater capacity than most Bluetooth speaker of the same volume, enables longer time for usage. Normal volume for usage: Bluetooth 8-10 hours and reception 20 hours. Maximum volume for usage: Bluetooth ≥ 4 hours and reception ≥ 10 hours (fully charged). Please note that, when taking OTR products on board, bring it with you all the titme instead of by shipment, or it will be detected and confiscated. Battery Replacement Battery replacement is considered designing OTR products. The structure of inner battery installation is available for replacement by manufacturer only. We will provide paid service for potential user. Do contact us if necessary. Volume Adjustment 2. Reception Sensitivity: 3UV (Picture 1, position 4 ) Volume increase by twisting the knob clockwise and twisting counter-clockwise to turn down. 3. Signal to Noise (SNR): >60db 5. Selectivity: >60 db Charging and Using Simultaneously Receive FM Broadcast 6. Distortion Rate: 0.5% OTR products is available for charging while using, however, the sound quality will be affected by adaptor performance under Bluetooth status, and charging adapter is the switch power supply under reception status, it will interfere the radio to receive signal, affecting reception performance. Thus, we suggest do not charge while using OTR products. (Picture 1, position 3 ) Twist the function select knob to FM, and rotate the knob for radio station selection to look for your favorite station. Indicator emits green light when receive the radio station successfully, (picture 1, position 5 ) but never lights while the signal is weak. Bluetooth Usage (Picture 1, position 3 ) Twist the knob to BT (Bluetooth) function, then you will hear sounds “Di Di” for matching preparation, while indicators (picture 1, position 5 ) flashes white light. Take out blue device such as your cellphone, search the MUZEN OTR Metal Bluetooth, and click to connect. The light keeps white after connected when you can open the player for music. Usage for AUX INPUT The radio is allowed to connect external signal (cellphone MP3, iPad, PC, etc.) with the standard charging cable and signal line with 3.5mm socket. When using, twist the knob to AUX (picture 1, position 3 ), indicator emits orange light (picture 1, position 5 ), which indicates broadcast signal. 7. Max Power Output: 5W/Bluetooth 2W/Reception 8. Bluetooth Version: 4.0 9. Speaker: 40mm neodymium iron boron full frequency speaker 10. Product Size: 88*61*49MM Indicator Lights of OTR Products MW-2 (radio function): reception——green (received successfully); blue, white, aux——orange; charging——red; green——fully charged. 11. Net Weight: about 440g Band Switch of OTR Product OTR band switch is tailored developed; please note that it’s 90 degree per gear, which is different from the usual 30 degree per gear. No direction demand, either twist clockwise or counter-clockwise will do. Circumstance Requirement Radio Antenna OTR products are designed to receive without using outside antenna. Height: Below 3000 meter Human Induction of OTR Radio Temperature: F0-40℃ When the station signal is weak, it may be clearer by holding in hand, and becomes weak again leaving hand. It’s called human induction, and more or less this problem exists in most radios. Condition for Usage: Indoor (Picture 2) Back Board 6 Multi-functional USB Socket(Charge, AUX IN) 7 Charging Status Indicator IC Warnning Bluetooth Connection OTR products adopt CSR chip set, one of the best Bluetooth solution at present, with liable and stable performance, receiving distance is within 5 meters. Some user complaint that failed to connect Bluetooth, that's because too many Bluetooth connections exist in your cellphone (or iPad). Delete the existing connections, reboot the cellphone, and re-connect OTR Bluetooth. However, if the devices are notebook, PC or else that produced in early years when Bluetooth Protocol is imperfect, they may fail to re-connect. And if the sound is not smooth in short distance, mostly because of the shared frequency interference under the 2.4G OTR environment. Please swift to another environment or change Wi-Fi to the 5.8G channel under this circumstance. Low Volume under Bluetooth Status Some feedback show that the volume is low after connecting with OTR products, while using network signal like Spotify or Pandora. It’s common that the volume of player maybe closed or limited, just turn up the volume. If the volume is still too low, delete the existing Bluetooth match and re-matched for connection. Waterproof Because OTR products are not waterproof, so please pay attention to waterproof for use and moisture proof in storage. FCC Warnning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. -English Warning Statement: "This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device." The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B). -French Warning Statement: "Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement." Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that are deemed to comply without testing of specifc absorption ratio (SAR).Cet équipement est conforme aux limites d'exposition aux rayonnements énoncées pour un environnement non contr?lé et respecte les règles d'exposition aux fréquences radioélectriques (RF) CNR-102 de l'IC. Cet équipement émet une énergie RF très faible qui est considérée conforme sans évaluation du débit d'absorption spécifque (DAS). Kind Reminder 1. Do not charge while using (connecting Bluetooth or use radio), charge when not use. 2. Please use FCC\CE certificated charger for charging (5V, current greater than 500mA), otherwise, we will never be responsible for the result from using inferior charger. After usage, please turn off the power. Keep me well! 1. Use after fully charged, then I can sing for you. 2. Reception performance requires good using circumstance. When receiving radio station, please be patient and twist the knob slowly, or you will miss other wonderful shows. Note: Keep away from interference source, be closer to the window when using indoor. (Only for MW-2AI) 3. Each functional switch should be set on the right place when I use the radio, and be aware of the volume in case making troubles to others. The device complies with RF specifications. After-Sale Service Terms of Guarantee: Product quality due to non-artificial damage within one year can be fully repaired for free, (we’ll pay for the freight for return and re-delivery). Except for battery, loud speaker and outer case, other parts enjoy free repair service within three years, including fee for repair and components replacement, in the precondition of non-artificial damage. However, the freight for return and re-delivery should be paid by users in this case. Shenzhen Airsmart Technology Co., Ltd. www.radio1964.com Product Brochure MUZEN·OTR Products MW-2AI OTR FM/Bluetooth Portable Speaker
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 5.6-c137 79.159768, 2016/08/11-13:24:42 Create Date : 2017:06:17 15:27:54+08:00 Creator Tool : Adobe Illustrator CC 2017 (Windows) Modify Date : 2017:06:17 15:27:54+08:00 Metadata Date : 2017:06:17 15:27:54+08:00 Thumbnail Width : 204 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 19356 bytes, use -b option to extract) Producer : Adobe PDF library 15.00 Format : application/pdf Title : 0617-OTR-说明书-EN N Pages : 1 Has Visible Transparency : True Has Visible Overprint : False Max Page Size W : 42.000001 Max Page Size H : 33.234990 Max Page Size Unit : Centimeters Font Name : ArialMT, Arial-BoldMT, SimHei Font Family : Arial, Arial, 黑体 Font Face : Regular, Bold, Regular Font Type : Open Type, Open Type, Open Type Font Version : Version 6.90, Version 6.90, Version 5.03 Font Composite : False, False, False Font File Name : arial.ttf, arialbd.ttf, simhei.ttf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : 默认色板组 Swatch Groups Group Type : 0 Swatch Groups Colorants Swatch Name: AutoCAD Color Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Cyan : 92.941201 Swatch Groups Colorants Magenta : 87.923998 Swatch Groups Colorants Yellow : 89.019603 Swatch Groups Colorants Black : 79.998499 Rendition Class : proof:pdf Document ID : xmp.did:ab962e52-7c3f-1b42-a0be-405e551ac969 Instance ID : uuid:73d3c92e-2090-4847-9423-44117056f9c5 Original Document ID : uuid:d2f0476c-5a36-41a3-96d3-56b05bf36b6e Derived From Instance ID : uuid:cbc431a2-8fac-4d22-92db-f396216862f7 Derived From Document ID : uuid:d2f0476c-5a36-41a3-96d3-56b05bf36b6e Derived From Original Document ID: uuid:d2f0476c-5a36-41a3-96d3-56b05bf36b6e Derived From Rendition Class : proof:pdf History Action : saved History Instance ID : xmp.iid:ab962e52-7c3f-1b42-a0be-405e551ac969 History When : 2017:06:17 15:26:49+08:00 History Software Agent : Adobe Illustrator CC 2017 (Windows) History Changed : / Creator Version : 21.0.2 Page Count : 1 Creator : Adobe Illustrator CC 2017 (Windows)EXIF Metadata provided by EXIF.tools