Airspan Communications 495AS Airsynergy Compact Outdoor Pico Base Station User Manual Additional Statements

Airspan Communications Limited Airsynergy Compact Outdoor Pico Base Station Additional Statements

Contents

Additional User Manual Statement

Download: Airspan Communications 495AS Airsynergy Compact Outdoor Pico Base Station User Manual Additional  Statements
Mirror Download [FCC.gov]Airspan Communications 495AS Airsynergy Compact Outdoor Pico Base Station User Manual Additional  Statements
Document ID1989402
Application IDN30s4QMovt2PFuZVYm5TPg==
Document DescriptionAdditional User Manual Statement
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize3.09kB (38639 bits)
Date Submitted2013-06-13 00:00:00
Date Available2013-06-14 00:00:00
Creation Date2013-06-05 12:25:32
Producing SoftwareGPL Ghostscript 9.05
Document Lastmod2013-06-05 12:25:32
Document TitleAdditional User Manual Statements
Document CreatorPDFCreator Version 1.4.1
Document Author: Charlie

Additional Airsynergy User Manual Statements
Airsynergy basestation, FCC ID: O2J-495AS, operating in the 4940-4990 MHz band.
Federal Communications Rules for operation in USA
The correct setting of the following Base Station parameters in Netspan, are critical to
the correct operation of equipment in compliance with the rules detailed in 47CFR90subpart
Y:
•
•
•
Transmit Power
Transmit Frequency
Channel Bandwidth
Any attempt to alter these parameters outside those permitted by the Netspan software or the
operator license could be a violation of that license
Transmit Power / Tune-up
Transmit power is set using the Netspan management software during install /commissioning.
The unit may be set to transmit with a power of up to 27dBm at each antenna port when
connected to cross polarised antenna with maximum gain of 18dBi.
FCC and Industry Canada RF Exposure Requirements
FCC Maximum Permissible Exposure (MPE) limits for equipment operating in the
frequency range 1500 – 100,000 MHz is 1.0 mW/cm2.
Following installation and commissioning, the safe distance from the antenna is the
greater of:
20cm
Or
r cm, where r = √ (PG/4πS)
P: power input to antenna(s) in mW
G: numeric gain of antenna relative to isotropic radiator
S: power density in mW/cm2 = 1 mW/cm2
The device has two antenna ports, so safe distance from the antenna shall be the greater
of:
20 cm or √ (2*PG/4πS)
Which gives
20 cm or √ (0.16*P*G) cm.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
Page Count                      : 1
Warning                         : XMP format error (no closing tag for C)
Producer                        : GPL Ghostscript 9.05
Create Date                     : 2013:06:05 12:25:32+01:00
Modify Date                     : 2013:06:05 12:25:32+01:00
Title                           : Additional User Manual Statements
Creator                         : PDFCreator Version 1.4.1
Author                          : Charlie
Subject                         : 
EXIF Metadata provided by EXIF.tools
FCC ID Filing: O2J-495AS

Navigation menu