Airspan Networks AIRSPAN-IDR Indoor Data Radio (IDR) User Manual Appendix C

Airspan Networks Inc Indoor Data Radio (IDR) Appendix C

Appendix C

 02030311-06  Airspan Networks Ltd.  C-1   Technical SpecificationsTechnical SpecificationsTechnical SpecificationsTechnical Specifications    This appendix lists the technical specifications for the following WipLL units: ! WipLL Base Station equipment: !  Base Station Radio (BSR) !  Point-to-Point Radio (PPR) !  Base Station Distribution Unit (BSDU) !  Base Station Power Supply (BSPS) !  GPS antenna ! WipLL Customer premises equipment: !  Subscriber Premises Radio (SPR) !  Subscriber Data Adapter (SDA) −  SDA-1 −  SDA-4H −  SDA-4S models !  Indoor Data Radio (IDR) C
Technical Specifications  Hardware Installation Guide C-2  Airspan Networks Ltd.  02030311-06 C.1. Base Station WipLL Equipment The following sub-sections list the specifications of the following WipLL Base Station equipment: ! Base Station Radio (BSR) ! Point-to-Point Radio (PPR) ! Base Station Distribution Unit (BSDU) ! Base Station Power Supply (BSPS)
Hardware Installation Guide  Technical Specifications 02030311-06  Airspan Networks Ltd.  C-3 C.1.1. Base Station Radio (BSR) Table  C-1:  BSR and MAC Specifications Parameter  Value  Comment Operating frequency range  •  2.4 GHz •  3.x GHz, MMDS, 2.8 •  5.8 GHz •  900 MHz •  700 MHz •  ISM band •  Licensed band •  Unlicensed •  Unlicensed •  Licensed *Other ranges available for trial Spectrum spreading method  Frequency hopping  Per ETSI EN301 253 Duplex method  •  Time Division Duplex (TDD): 2.4 GHz, 2.8 GHz, 3.x GHz, MMDS, 900 MHz, 700 MHz, and 5.8 GHz •  Frequency Division Duplex (FDD): 3.x GHz   Transmit bit rates  Up to 4 Mbps  BER and distance dependent Channel spacing  1 MHz  For 3.5 GHz the channel spacing can be 1 MHz or 1.75 MHz Output power from the BSR  Up to 27 dBm (configurable)   Depending on local regulations, maximum output power can be configured at the factory Modulation method  8-level CPFSK   Channel access method  PPMA / Adaptive TDMA   Protocol efficiency  Up to 80%   For large data packets Number of SPR/IDR per BSR  Up to 126
Technical Specifications  Hardware Installation Guide C-4  Airspan Networks Ltd.  02030311-06 Table  C-2:  BSR EMC and Radio Standards Compliance Parameter  Value Radio Standards Compliance  •  ETSI EN 300 328-1 •  ETSI EN 301 253 •  FCC part 15 •  RSS139 •  Telec EMC  •  ETSI ETS 300 826 •  ETSI EN 300 385 •  ETSI EN 300 386-2 •  ETSI ETS 300 132-2 •  FCC part 15 Table  C-3:  BSR Agency Certification Parameter  Value Emissions / Immunity  EN 300 339 EN 300 386-2 ETS 300 328 Safety  EN / IEC 60950 Environmental  ETS 300 019-2-x Table  C-4:  BSR Network Specifications Parameter  Value  Comment Filtering Rate  10,500 frames/sec  At 64 byte packets Forwarding Rate  1,300 frames/sec  At 64 byte packets Routing table length  200 networks, including subnets  Table  C-5:  BSR Power Requirements Parameter  Value  Comment Voltage •  Minimum:  •  Maximum: 48 VDC nominal •  30 VDC •  55 VDC Voltage is received from the BSDU or SDA, depending on base station setup Maximum Amperes:  500 mA
Hardware Installation Guide  Technical Specifications 02030311-06  Airspan Networks Ltd.  C-5 Table  C-6:  BSR Environmental Conditions Parameter  Value  Comment Operating temperature of outdoor units (BSR and SPR) -30ºC to +60ºC  Optional range of -40ºC to +70ºC Storage temperature  -40ºC to +80ºC    Table  C-7:  BSR Network Interface Parameter  Value  Comment Ethernet Network  UTP EIA/TIA  Category 5 Standards Compliance  ANSI/IEEE 802.3 and ISO/IEC 8802-3 10Base-T compliant  Serial Port  RS-232    Table  C-8:  BSR Physical Dimensions Parameter  Value  Comment Height  400 mm (15.74 inches) Width  317 mm (12.48 inches) Depth  65.5 mm (2.58 inches) Weight 4.7 kg Excluding mounting kit
Technical Specifications  Hardware Installation Guide C-6  Airspan Networks Ltd.  02030311-06 C.1.2. Point-to-Point Radio (PPR) Table  C-9:  PPR Radio Specifications Parameter  Value Operating frequency bands  •  2,400 to 2,500 MHz •  3,400 to 3,800 MHz •  5,725 to 5,875 MHz Duplex method  •  Time Division Duplex (TDD) for all bands •  Frequency Division Duplex (FDD) for 3.4 to 3.8 GHz Radio Technology  FH-CDMA Multiple Access Method  PPMA Output power  27 dBm Antenna type (built-in) •  PPR •  SPR  •  18 dBi  / 15 dBi •  18 dBi  / 15 dBi Sub-Channel Spacing  1 MHz Modulation  Multilevel  (2, 4, or 8) CPFSK Receiver Sensitivity (BER 1E-6 at 2/4/8 FSK) -90/ -83/ -75 dBm Throughput  Up to 4 Mbps per PPR-SPR link Radio Standards Compliance  •  ETSI EN 300 328-1 •  ETSI EN 301 253 •  FCC part 15 •  RSS139 •  Telec EMC  •  ETSI ETS 300 826 •  ETSI EN 300 385 •  ETSI EN 300 386-2 •  ETSI ETS 300 132-2 •  FCC part 15
Hardware Installation Guide  Technical Specifications 02030311-06  Airspan Networks Ltd.  C-7 C.1.3. Base Station Distribution Unit (BSDU) Table  C-10:  BSDU Network Specifications Parameter  Value Filtering Rate  105,000 Frames / sec Forwarding Rate  62,500 Frames / sec Table  C-11:  BSDU Power Requirements Parameter  Value Voltage  48VDC  nominal Power consumption  Maximum 300W (including the feeding of 6 × BSRs) Table  C-12:  BSDU Environmental Conditions Parameter  Value Operating Temperature  0ºC to +50ºC Storage Temperature  -40ºC to +80ºC Table  C-13:  BSDU Network Interface Parameter  Value  Comment Ethernet Network  100/10Base-T: UTP EIA/TIA  Category 5 Standards Compliance  ANSI/IEEE 802.3, ISO/IEC 8802-3 10/100 Base-T compliant  Serial Port  RS-232   Table  C-14:  BSDU Physical Dimensions Parameter  Value Height 4.32 cm Width 48.26 cm Depth 22.86 cm Weight 2.9 kg
Technical Specifications  Hardware Installation Guide C-8  Airspan Networks Ltd.  02030311-06 C.1.4. Base Station Power Supply (BSPS) Table  C-15:  BSPS Rectifier Specifications  Parameter  Value Voltage  90VAC to 270VAC Current (nominal)  3.2A @ 230V / 4.3A @ 115V Frequency  47Hz to 63Hz Input Power factor (nominal line/load)  Greater or equal to 0.993 Voltage (default)  53.5VDC Regulation (line & load)  ±0.4% Adjustable range  47 to 58 VDC Current  12A @ 54V Ripple & noise  50mVp-p Efficiency (nominal load)  85% @ 230V / 82% @ 115V Overload current  <12A Over-voltage protection  60 VDC Over-temperature protection (measured on case, upper panel corner) •  80±5°C rectifier stops •  72±5°C rectifier recovers Walk-in time  < 0.5 sec Output Hold-up time  40 ms Withstand voltage (1 min)  •  4230VDC INPUT/OUTPUT •  2120VDC INPUT/GND •  1700VDC OUTPUT/GND  Working temperature  -10 to 45°C Storage temperature  -50 to 80°C Dimensions (mm)  235 x 150 x 50 (L x W x H) Weight 1100g EMC  Refer to system specifications General Safety  According to: IEC950
Hardware Installation Guide  Technical Specifications 02030311-06  Airspan Networks Ltd.  C-9 Table  C-16:  BSPS DC Distribution Specifications  Parameter  Value Voltage  90VAC to 270VAC Current (at full load)  N =Number of rectifier modules •  N*3.2A @ 230V •  N*4.3A @ 115V  Frequency  47 Hz to 63 Hz Power factor (at full load)  Greater or equal to 0.993 Input Voltage (programmable)  42 to 60VDC ± 0.5VDC Default float and boost voltage  54 and 57VDC respectively Regulation (line, load, sharing)  ±1% Current  N*12A (48A max.) Psophometric noise  -52 dBm (over 600 &) Ripple & noise  50mVp-p Efficiency (nominal load)  85% @ 230V / 82% @ 115V Overload current  < N*12A Over-voltage protection  60VDC Walk-in time  < 1 sec Hold-up time  40 ms Output current indication  10 LED’s bar-graph Active current sharing  ±10% accuracy at full load Output Withstand voltage (1 min)  2120VDC INPUT/GND Working temperature  -10 ¸ 45°C Storage temperature  -50 ¸ 80°C Dimensions (19” X 3U)  Depth is 320mm W/O terminals, 360mm with terminals Weight  13 kg (main unit + 3 rectifiers) General RS232 Communication  9600 bps, no-parity, 1 stop-bit
Technical Specifications  Hardware Installation Guide C-10  Airspan Networks Ltd.  02030311-06  Parameter  Value EMC According to: •  EN300-386-2 SUB 7.2.3 •  EN55022 class B •  IEC1000-4-2 •  IEC1000-4-3 •  IEC1000-4-4 •  IEC1000-4-5 •  IEC1000-4-6 •  IEC1000-4-11 •  IEC1000-3-2 •  IEC1000-3-3 Safety  According to: IEC950  Maximum current withstand  2x70A LVLD (optional) Trip voltage level  Disconnect default: 43± 0.5 VDC, user programmable Re-connect: with AC recovery
Hardware Installation Guide  Technical Specifications 02030311-06  Airspan Networks Ltd.  C-11 C.1.5. GPS antenna Table  C-17:  SPR Power Requirements Parameter  Value  Comment Voltage Input  36 VDC  Supplied by WipLL’s BSDU Consumption   1.8W     Table  C-18:  Environmental Considerations Parameter  Value  Comment Operating temperature    -30ºC to +75ºC     Table  C-19:  GPS General Parameter  Value  Comment Input  DGPS (Differential GPS)   Output  1 pulse per second   Standards Compliance  MIL-STD 810E   Interface standard  RS-422    Table  C-20:  GPS Dimensions Parameter Value Comment Diameter  115 mm    Height 90 mm
Technical Specifications  Hardware Installation Guide C-12  Airspan Networks Ltd.  02030311-06 C.2. Customer Premises WipLL Equipment The following sub-sections list the specifications of the following WipLL CPE equipment: ! Subscriber Premises Radio (SPR) ! Subscriber Data Adapter (SDA) ! Indoor Data Radio (IDR) C.2.1. Subscriber Premises Radio (SPR) Table  C-21:  SPR and MAC Specifications Parameter Value Comment Operating frequency  •  2.4 GHz •  3.x GHz, MMDS, 2.8 •  5.8 GHz •  900 MHz •  700 MHz •  ISM band •  Licensed band •  Unlicensed •  Unlicensed •  Licensed Spectrum spreading method  Frequency hopping  Per ETSI EN 301 253 Duplexing Method  •  Time Division Duplex (TDD): 2.4 GHz, 2.8 GHz, 3.x GHz, MMDS, 900 MHz, 700 MHz, and 5.8 GHz •  Frequency Division Duplex (FDD): 3.x GHz  Transmit Bit Rates  Up to 4 Mbps  BER and distance dependent Channel spacing  •  1 MHz  •  1 MHz or 1.75 MHz when operating in the 3.5 GHz band  Output power from the radio  Up to 27 dBm (configurable)  Depending on local regulations. Maximum power output can be set at the factory.
Hardware Installation Guide  Technical Specifications 02030311-06  Airspan Networks Ltd.  C-13 Parameter Value Comment Modulation method  8-level CPFSK   Channel access method  PPMA / Adaptive TDMA   Protocol efficiency  Up to 80%  For large data packets
Technical Specifications  Hardware Installation Guide C-14  Airspan Networks Ltd.  02030311-06 Table  C-22:  SPR EMC and Radio Standards Compliance Parameter  Value Radio Standards Compliance  •  ETSI EN 300 328-1 •  ETSI EN 301 253 •  FCC part 15 •  RSS139 •  Telec EMC  •  ETSI ETS 300 826 •  ETSI EN 300 385 •  ETSI EN 300 386-2 •  ETSI ETS 300 132-2 •  FCC part 15 Table  C-23:  SPR Agency Certification Parameter  Value Emissions / Immunity  EN 300 339, EN 300 386-2, ETS 300 328 Safety EN/IEC 60950 Environmental  ETS 300 019-2-x Table  C-24:  SPR Network Specifications Parameter  Value  Comment Filtering rate  10,500 frames / sec  At 64 bytes Forwarding rate  1,300 frames / sec  At 64 bytes Routing table length  16   Table  C-25:  SPR Power Requirements Parameter  Value  Comment •  Voltage •  Minimum •  Maximum •  48VDC nominal •  30VDC •  55VDC Power supplied by the SDA Consumption   Maximum   500 mA
Hardware Installation Guide  Technical Specifications 02030311-06  Airspan Networks Ltd.  C-15 Table  C-26:  Environmental Considerations Parameter  Value Operating temperature  -30ºC to +60ºC Storage temperature  -40ºC to +80ºC Table  C-27:  Network Interface Parameter  Value  Comment Ethernet Network  UTP EIA / TIA  Category 5 Standards Compliance  ANSI/IEEE 802.3 and ISO/IEC 8802-3; 10BaseT compliant  Serial Port  RS-232   Table  C-28:  SPR Physical Dimensions (without High-Gain Antenna) Parameter  Value  Comment Height  311 mm (12.24 inches) Width  244 mm (9.6 inches) Depth  65.5 mm (2.57 inches) Weight 2.5 kg Excluding mounting kit Table  C-29:  SPR Physical Dimensions (with High-Gain Antenna) Parameter  Value  Comment Height  400 mm (15.74 inches) Width  317 mm (12.48 inches) Depth  65.5 mm (2.57 inches) Weight 4.7 kg Excluding mounting kit   Note:  The SPR cable and connector are the same as the BSR.
Technical Specifications  Hardware Installation Guide C-16  Airspan Networks Ltd.  02030311-06 C.2.2. Subscriber Data Adapter (SDA) C.2.2.1. SDA-1 Table  C-30:  SDA-1 Physical Dimensions Parameter  Value Height 200 mm Width  150 mm  Depth  40 mm  Weight 47 kg  Table  C-31:  SDA Power Requirements Parameter  Value Output Voltage   -48VDC nominal  Power supply  110-240 VAC, 50/60Hz,  0.3-0.7A  Table  C-32:  SDA-1 Environmental Considerations Parameter  Value Operating temperature    0ºC to +50ºC  Table  C-33:  SDA-1 Network Interfaces Parameter  Value Data from SPR/BSR  DB15  Ethernet  RJ45 socket for a PC interface Power  AC power connector
Hardware Installation Guide  Technical Specifications 02030311-06  Airspan Networks Ltd.  C-17 C.2.2.2. SDA-4H Table  C-34:  SDA-4-H Physical Dimensions Parameter  Value Height 200mm Width 150mm  Depth 40mm  Weight 53 kg  Table  C-35:  SDA-4H Power Requirements Parameter  Value Output Voltage   -48VDC nominal  Power supply  110-240 VAC, 50/60Hz,  0.3-0.7A  Table  C-36:  SDA-4H Environmental Considerations Parameter  Value Operating temperature    0ºC to +50ºC  Table  C-37:  SDA-4H Network Interfaces Parameter  Value Data from SPR/BSR  DB15  Ethernet  Three RJ45 socket for a PC interface; one RJ-45 for cross over connection Power  AC power connector
Technical Specifications  Hardware Installation Guide C-18  Airspan Networks Ltd.  02030311-06 C.2.2.3. SDA-4S Models Table  C-38:  SDA-4S Physical Dimensions Parameter  Value Height  200 mm (7.87 inches) Width  150 mm (5.9 inches) Depth  40 mm (1.57 inches) Weight 53 kg  Table  C-39:  SDA-4S Power Requirements Parameter  Value Output Voltage   -48VDC nominal  Power supply  110-240 VAC, 50/60 Hz,  0.3-0.7A  Table  C-40:  SDA-4S Environmental Considerations Parameter  Value Operating temperature    0ºC to +50ºC  Table  C-41:  SDA-4S Network Interfaces Parameter  Value Data from SPR/BSR  15-pin D-type  Ethernet  Four 8-pin RJ-45 10/100BaseT sockets for PC interface. These ports support 10/100 Mbps (Auto Negotiation), and MDI/MDI-X automatic crossover Power  AC power connector
Hardware Installation Guide  Technical Specifications 02030311-06  Airspan Networks Ltd.  C-19 C.2.3. Indoor Data Radio (IDR) Table  C-42:  IDR Radio and MAC Specifications Parameter  Value  Comment Operating frequency  •  2.4 GHz •  3.45 GHz •  3.5 GHz •  900 MHz  Spectrum spreading method  Frequency hopping  (Per ETSI ETS 300 328) ARIB-STD-T66 Duplex Method  •  Time Division Duplex (TDD) at 2.4 GHz and 900 MHz •  Frequency Division Duplex (FDD) at 3.5 GHz and  3.45 GHz  Transmit Bit Rates  Up to 4 Mbps  Depending on BER Channel spacing  1 MHz   Output power from the radio  Up to 27 dBm, configurable at 2.4 GHz Depending on local regulations. Maximum power output can be set at the factory. Channel access method  PPMA   Protocol efficiency  Up to 80%  At BER = 10-5, depending on the application
Technical Specifications  Hardware Installation Guide C-20  Airspan Networks Ltd.  02030311-06 Table  C-43:  IDR EMC and Radio Standards Compliance Parameter  Value Radio Standards Compliance  •  ETSI EN 300 328-1 •  ETSI EN 301 253 •  FCC part 15 •  RSS139 •  Telec EMC  •  ETSI ETS 300 826 •  ETSI EN 300 385 •  ETSI EN 300 386-2 •  ETSI ETS 300 132-2 •  FCC part 15 Table  C-44:  IDR Agency Certification Parameter  Value Emissions / Immunity  •  FCC Class B •  ARIB-STD-T66 •  ETSI 300 386-2 Safety EN/IEC 60950 Environmental  ETS 300 019-2-x Table  C-45:  IDR Network Specifications Parameter  Value  Comment Filtering rate  10,500 frames/sec  At 64 bytes Forwarding rate  1,300 frames/sec  At 64 bytes Table  C-46:  IDR Power Requirements Parameter  Value External Power Supply Voltage •  Minimum: 100 VAC •  Maximum: 240VAC Operating Frequency Range  50 to 60 Hz Maximum Power consumption  Less than 15W
Hardware Installation Guide  Technical Specifications 02030311-06  Airspan Networks Ltd.  C-21 Table  C-47:  IDR Environmental Considerations Parameter  Value  Comment Operating temperature    0-50ºC   Operating Humidity  +30Cº 93%  Maximum humidity Storage temperature  -40 – 70ºC   Table  C-48:  IDR Network Interface Parameter  Value  Comment Ethernet Network  UTP EIA / TIA  Category 5 Standards Compliance  ANSI/IEEE 802.3 and ISO/IEC 8802-3 10Base-T compliant  Serial Port  RJ-11   Table  C-49:  IDR Physical Dimensions Parameter  Value  Comment Weight 1,430 g  Dimensions (H x W x D)   •  155 mm (6.1 inches) x 233 mm (9.17 inches) x 74.5 mm (2.93 inches) •  120.5 mm (4.74 inches) x 61mm (2.4 inches) x 35 mm (1.37 inches) •  IDR with built-in antenna   •  IDR with an external antenna  Note: Dimensions exclude the external power adapter. Table  C-8:  IDR Pole Mounting Dimensions Parameter  Value Minimum pole diameter  35 mm (1.37 inches) Maximum pole diameter  50 mm (1.97 inches)

Navigation menu