Airtech Information and Communication ARH-465 GMRS Transceiver User Manual User Instructions

Airtech Information & Communication Co., Ltd. GMRS Transceiver User Instructions

User Instructions

INDEXGENERAL FEATURES....................................................................1UNPACKING......................................................................................2GETTING READY ............................................................................2DESCRIPTION ..................................................................................2OPERATION......................................................................................3FUNCTION MODE ...........................................................................4RECHARGING THE BATTERY......................................................5SPECIFICATIONS.............................................................................5GENERAL FEATURESGeneral Features! Ultra compact design & size115x53x28mm, 138g only! 38 CTCSS! Button Lock! Scan & Priority Scan! Beep on/off! Talking range to 4 miles! Transferable by cloning! Clear voice transmission and reception! Rugged construction
UNPACKINGUnpack and check that all items have been enclosed.Packing contents: 1. Radio/Antenna, 2. Battery, 3. Beltclip, 4. Hand strap, 5. Charger, 6.User’s manualGETTING READY1. Installation, Removal the Belt Clip Installation: align the belt clip with the plastic slots ofbackside of unit. Slide the belt clip onto the unit,pushing firmly until a click heard. Removal: hold up the belt clip release tab with fingernail orcoin (or like instrument). While holding up the releasetab, slide the belt clip out and away from the unit. 2. Installation the Battery Pack Installation: turn off the radio. Unscrew the battery packcover lock screw by rotating counterclockwise withcoin (or like instrument). Open the cover and insert thebattery pack in right position. Close the cover andscrew the cover lock screw. 3. Charging the BatteryBefore your starting operation, make sure the batteryis fully charged. (Refer to charging method next page)DESCRIPTION•power on/off button and indicate LEDPush 0.5 second to turn power on, push 0.5 second againto turn power off. Indicate LEDRed on Transmitting, charging Blinking Low battery alertGreen on Receiving, rechargingfinished Blinking Different sub-tone when•external audio/microphone andadapter socket•antenna•speaker•PTT(push to talk)button•up/down button•function button•monitor button•LCD displaypanel•enter button•power on/off buttonand indicate LED•microphone
receivingRed, green both on Abnormal charging•up/down buttonYou can select the audio volume (0~15), the channel andthe function mode on or off with this button.•function buttonPress to go function mode (refer to next page).•monitor buttonPress to monitor. Holding down over 2 seconds keepsmonitoring on. Press monitor button again to stop.•enter buttonPress to finalize setting.•PTT(push to talk) buttonHold down to transmit, release to receive.•LCD display panel•speaker•microphoneTalk 5• in distance during transmitting.•antenna•external audio/microphone and adapter socket•belt clip release tab•battery pack cover•cover lock screw•belt clip•hand strapOPERATION
1. Power turn on/off and volume controlPress power on/off button• 0.5 second to turn power on,press 0.5 second again to power off. Press up/downbutton• to increase or reduce the audio volume ( 00 ~ 15). Holding down up/down button• makes to move fast.2. TransmitChoose the channel as you desire. Hold down the PTTbutton• and talk to microphone• in 5• distance. TheLED•(power button) lights red on transmitting. Release thePTT button to stop transmitting.3. ReceiveChoose the channel as you desire. The LED• lights greenon receiving. In case the signal doesn’t match sub-tone,the green light blinks.4. MonitorPress the monitor button• to monitor. Holding downmonitor button over 2 seconds keeps monitoring functionon. Press the monitor button shortly again to stop.FUNCTION MODE1. Channel selectIf you press the function button• once, the channel numberin LCD blinks. Then, select the channel wanted by pressingup/down button•. Press the enter button•to finalize or press the function button• to go on nextmode2. Sub-tone selectDuring the sub-tone number blinking,select the sub-tone wanted by pressingup/down button•. It has from 01 ~ to 38.3. ScanDuring the scan sign blinking, press the upbutton• to upward scan or press the downbutton• to downward scan. Thetransceiver stops scanning after detectinga signal and remains on the same channel until the signaldrops out for 2 seconds. Press the up/down button• to goon scanning even if it remains on the same channel forreceiving. Press the PTT button• to stop.4. Priority scanDuring number blinks. Then press theup/down button• to priority scan signblinking, press the up/down button• tochoose on or off. When you choose `on`,the channel select the channel wanted.This function scans selected channel when the radio isstanding by on the other channel.5. Button lockDuring button lock sign blinking, press the up/down button•to choose on or off. This function prevents from changingthe channel by unintended pressing of the up/down button
(only PTT button and power button work).6. Beep toneDuring beep tone sign blinking, press theup/down button• to choose on or off.7. Power saveDuring power save sign blinking, press theup/down button• to choose `00`, `01`, `02`.00: no power saving, 01: normal powersaving, 02: strong power saving.8. Squelch levelDuring squelch level sign blinking, pressthe up/down button• to select squelchlevel (00 ~ 15). Select the lower numberfor easy opening, select the highernumber for hard opening ascircumstance condition (it set 08 in producing)0RECHARGING THE BATTERY1. Battery (Ni-MH)Voltage DC 7.5VDuty time(5-5-90) HM-650 Over 8 hrs2. ChargerInput power Free voltage (AC90~250V)Charging time HM-650 Appr. 1.5 hrsOperating temperature 0ºC~55ºCConnect the charger to electric power supply (free voltage AC90~250 V). Turn the transceiver off and put into front pod of thecharger. The red light turns on during rapid charging and thegreen light turns on during trickle charging. When you put twobatteries at same time, the rapid charging charges first then thetrickle charging starts.LEDRed On ChargingGreen On Fully chargedLow battery alertLCD shows battery condition (••••).The indicate LED•(power button) will blink red, if the batteryfalls below a low voltage level, LCD shows “oFF”.SPECIFICATIONS ARH-222 ARH-444 ARH-465 ARH-446Dimension(HxWxD) 115x53x28mm (650 mAH Battery)Weight (WithBattery) 138g (215g)OperatingVoltage DC 7.5VOperatingTemp. -20 ~ 60•
Battery Life(5:5:90)650mAHBattery8 hrs 10hrsChannels 22 16 16 8Privacy Codes 38 CTCSSBand Width 25KHz 12.5KHz 25KHz 12.5KHzFrequencyRange Tx 222MHz 444MHz 462.5625~467.725MHz446.0~446.1MHzRx 222MHz 444MHz 462.5625~462.725MHz446.0~446.1MHzFM Hum &Noise Tx -40 dBRx -40 dBRx Sensitivity -119 dBm (0.25uV)Rx SpuriousResponse -60 dBRx Selectivity -60 dBRxIntermodulation-60 dBTx Power 2W 0.5WTx SpuriousRejection -60 dBcFrequencystability ±5 ppmAccessoriesDesk Rapid / Trickle Charger (SMPS) ACR-650/1.5 hrs650 mAH Ni-MH Battery HM-650APE-10 Earpiece with PTT MIC
USER’S MANUALARH SeriesARH-446 (PMR446)ARH-465 (GMRS)ARH-444 (Semi LMR)ARH-222 (Semi LMR)ARH-448 (FRS)Airtech Information & Communication Co., Ltd.#101-807 Techno Park Complex, 364, Samjung-Dong, Ojung-Gu, Puchon, Korea Zip: 421-150Tel: 82 32 234 2345 / Fax: 82 32 234 2350URL: http://www.airtech21.comE-mail: sales@airtech21.com

Navigation menu