Airtronics ATX038 Radio controller module for RC Models User Manual DSS Module and Receiver Manual

Download:
Mirror Download [FCC.gov]
Document ID	797014
Application ID	lfkFzGOP+KhUFEKbbu3DKg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	45.92kB (573991 bits)
Date Submitted	2007-05-25 00:00:00
Date Available	2007-05-25 00:00:00
Creation Date	2007-03-23 17:36:57
Producing Software	Corel PDF Engine Version 3.0.0.739
Document Lastmod	2007-03-23 17:36:57
Document Title	DSS Module and Receiver Manual.cdr
Document Creator	CorelDRAW
Document Author:	Rick Mattie

GHz
DSS 2.4
BINDING (RECEIVER to TRANSMITTER)
After installing the DSS Receiver and Module, you are now ready to Bind them together. Binding is the proses that will
match the DSS Receiver to the DSS Module electronically as a match set. You can Bind additional Airtronics DSS
Receivers to your DSS Module to operate many other cars, trucks and or boats.
Module and Receiver Manual
Throttle Fail Safe is a feature that will move the throttle servo to a preset position that you set. If no user preset is added,
the Fail Safe will set it-self to the neutral throttle position.
Thank you for purchasing your new DSS Module and Receiver.
The DSS Module and Receiver are to be used in an
Airtronics M8, M11, Super EXZES and Super EXZES Plus.
DO NOT try to use the DSS Module or Receiver in any other
radio system. Please read this manual completely before
installing and or using it. Always keep this manual to use as a
reference. Get the Advantage, Get Airtronics.
BINDING:
SERVO CONNECTIONS
Install your DSS Receiver as far away from any electrical components as possible. Route the antenna threw a
plastic tube so that it is in the upright position. With the receiver power switch in the off position, insert the servos and
or ESC as shown in the illustration below.
CAUTION
1. Turn the power switch to the ON position on the Transmitter.
The DSS Module LED will turn on after 6 seconds.
2. Depress and hold the DSS Receiver Binding button.
3. Turn the power switch to the ON position on the DSS Receiver and continue holding the Binding button.
The DSS Receiver LED will flash slowly.
4. Release the Binding button on the DSS Receiver after 2 seconds.
5. Depress and hold the Binding button on the transmitter until the LED on the DSS Receiver flashes rapidly.
6. Binding is now complete. Both DSS Module and Receiver LED will now stay on.
7. Operate the controls to confirm.
THROTTLE FAIL SAFE
After binding of the DSS Module and Receiver, you can set the Throttle Fail Safe feature.
When installing your DSS in your model, always make
sure to set your model on a stand so the wheels are free
from any traction before turning on your radio and or
connecting your motor for the first time.
Binding Button
and Blue LED
1. Turn the power switch to the ON position on the transmitter. Confirm DSS Module LED is on.
2. Turn the power switch to the ON position on the DSS Receiver. Confirm DSS Receiver LED is on.
3. Move controls to confirm connection between transmitter and receiver.
4. Move throttle lever to your desired Fail Safe position and hold.
NOTE: If the throttle lever is left in the neutral position, Fail Safe will be set at that position.
5. Depress the binding button on the DSS Receiver for 4 seconds. LED will flash slow.
6. Release the throttle lever after the receiver LED starts to flash rapidly.
7. Confirm that the Throttle Fail Safe is working properly by turning the transmitter power switch OFF. Turn the transmitter
power switch back on to confirm full control.
AA Dry Cell Battery Holder
Input 6.0v Max
Batt
Switch
To Battery
BINDING NOTES
You must rebind and reset Throttle Fail Safe on the DSS Receiver when:
Mechanical Speed Controller
To Motor
1. You change your M11 from (2 to 4) or (4 to 2) channels.
2. Install your DSS Module from a M11 to M8 or M8 to M11.
(AUX2) Auxiliary 2
Electronic Speed Controller Setup
WARRANTY
Switch
(AUX1) Auxiliary 1
To Battery
(TH) Throttle
To Motor
(TH) Throttle
Your Airtronics DSS Module and DSS Receiver are warranted for the period of one year from the original date of
purchase. When in need of any warranty request, send the item to the address below with a detailed note stating the
problem you are having and with a copy of the original sales receipt. Any modifying or abuse of the product will void
any warranty.
The DSS Module and DSS Receiver are not waterproof. Water damage is not covered under any warranty.
FCC INFORMATION
ESC
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) This device must accept any interference received, including interference
that may cause undesired operation.
(ST) Steering
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
DSS MODULE
Before installing your DSS Module, make sure the power switch is in the OFF position. Read the following instructions
first before turning the power switch to the ON position on the transmitter.
The DSS Module antenna can be rotated 270o left or
right and has 3 positions up and down. Adjust the
DSS Module antenna to your preference.
45
270o
Binding Button
and Blue LED
This product contains a radio transmitter with wireless technology which has been tested and found to be compliant with
the applicable regulations governing a radio transmitter in the 2.400GHz to 2.4835GHz frequency range.
The associated regulatory agencies of the following countries recognize the noted certifications for this product as
authorized for sale and use:
USA
Denmark
Germany
Spain
90
Airtronics Inc
1185 Stanford Court
Anaheim, CA 92805
PH: 714-978-1895 FAX: 714-978-1540
Web: www.Airtronics.net
Contact: info@Airtronics.net
Canada
France
Italy
Sweden
Belgium
Finland
Netherlands
UK
AIRTRONICS
Get The Advantage
ÂŽ

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
Create Date                     : D:20070323173657
Modify Date                     : D:20070323173657
Producer                        : Corel PDF Engine Version 3.0.0.739
Author                          : Rick Mattie
Creator                         : CorelDRAW
Title                           : DSS Module and Receiver Manual.cdr

EXIF Metadata provided by EXIF.tools