Alacrity Barcode Technology MJR302877 Ring Type Scanner User Manual
Shenzhen Alacrity Barcode Technology Co., Ltd Ring Type Scanner
User Manual
Bluetooth Scanner
Quick Start Guide
Outdoor 50 m viewing distance wireless
transmission
With a variety of PC Bluetooth a key match
Built-in FLASH memory support for HTTP
Offline scanning barcodes can store more than
5000
Supports normal mode, counting mode, the
mode is not lost, SPP mode and can switch
freely
Support for Windows XP, Win 7 Win8 / 10
system PC. Android devices, IOS devices
Supports the HID protocol, SPP agreement
1
1. Insert the Bluetooth scanner receivers, the
computer will automatically install the Bluetooth
receiver to drive (the installation process can not
pull out the receiver)
2. Start the Bluetooth scanner, press the Bluetooth
scanner 8 seconds or sweep pairing bar code will
go into pairing mode [], the connection indicator
(blue) flashes rapidly
3. Locate the Bluetooth Computer Control Panel,
open the Bluetooth panel, click the Add button
4. Select "My device is set up and ready, you can
find", click Next
5. The Add Bluetooth Device Wizard dialog box
should appear a Gerneral Bluetooth HID Barcode
device icon
6. Double-click Gerneral Bluetooth HID Barcode
equipment icon key dialog box appears, choose not
to use keys, the next step will begin installing the
driver
7. After a successful installation of the Bluetooth
device in more than a Gerneral Bluetooth HID
Barcode equipment, while Bluetooth scanners short
beep sound, this Bluetooth adapter installed
8. pairing is successful, the Bluetooth indicator light
blue lights lit scanner
1. Start Bluetooth scanner, press the Bluetooth
button on the scanner or sweep 8 seconds pairing
bar code will go into pairing mode [], the
connection indicator (blue) flashes rapidly
2. Open the Bluetooth device to search Gerneral
Bluetooth HID Barcode
3. Click on the Bluetooth device, pairing status
4. The pairing is successful, the Bluetooth indicator
light blue lights lit scanner.
2
1. Insert the Bluetooth scanner receivers, the
computer will automatically install the Bluetooth
receiver to drive (the installation process can not pull
out the receiver)
2. Start the Bluetooth scanner, press the Bluetooth
button on the scanner or sweep 8 seconds pairing bar
code will go into pairing mode [], the connection
indicator (blue) flashes rapidly
3. Locate the "Devices and Printers" in the computer
control panel, click on the "Add Device"
4. The Add Bluetooth Device Wizard dialog box should
appear a Gerneral Bluetooth HID Barcode device icon
5. Right-click "Gerneral Bluetooth HID Barcode"
device icon "Properties" option, the Properties dialog
box appears, click OK. At this point the computer
prompts the driver is being installed
6. Wait for the computer to install the driver is
complete, the scanner Bluetooth indicator (blue) If the
indicator is a Bluetooth scanner and computer
connection is successful
3
1. Insert the Bluetooth scanner receivers, the computer
will automatically install the Bluetooth receiver to drive
(the installation process can not pull out the receiver)
2. Start the Bluetooth scanner, press the Bluetooth
button on the scanner or sweep 8 seconds pairing bar
code will go into pairing mode [], the connection
indicator (blue) flashes rapidly
3. Open the Control Panel, click on the "Add Device",
the computer will search to Gerneral Bluetooth HID
Barcode equipment
4. Double-click the device or click on Next, the
computer will automatically install the driver
5. The driver is installed, Bluetooth scanner indicator
(blue) If the bar code gun or a short beep sound,
indicating that the Bluetooth scanner has been
successfully connected to the computer
4Barcode mode feature set
Serial mode
IOS show hidden keyboard
IOS keyboard keys,
double-click Show hidden
Links pairing mode
HID (USB) mode
Normal mode
No loss pattern Barcode tone sweep to open
Barcode sweep tone Close
Hardware version
information
SPP mode
Count mode
The total number of data
Barcode Upload tone open
Barcode Upload tone Close
Software version
information
Shutdown Mode
clear data
Data Upload
Bluetooth restore
factory settings
And Windows XP
Match system
And Windows7
Match system
And Windows 8 / Windows 10
Match system
And Android, ios
Match system
Warning!
Barcode above Use with caution
Sleep Time Setting Language selection
(default American English)
Start setting
30 seconds
60 seconds
No scanner sleep mode
2 minutes
American English
French
German
Italian language
Russian
5 minutes
10 minutes
20 minutes
LED lights
Buzzer
Bluetooth scanners and Android phones can not connect how to do?
Check that your phone is android 3.0 or more can be directly connected
Why are not part of the bar code scanner?
Because some not commonly used bar code at the factory default setting is off, you
can simply open the corresponding bar code settings can be a normal scan, if you do
not know the appropriate type of bar code, please contact the manufacturer
Why after pairing bar code can not be uploaded to a computer or cell phone?
1. Verify whether the pairing is successful, the pairing is successful Bluetooth
Scanner LED display is blue
2. You have opened the inventory functions (inventory under the bar code does not
automatically upload mode, you need to manually sweep the corresponding bar code
upload)
3. Change to the normal mode, you can upload one side while scanning
Computer or mobile phone search is not a Bluetooth scanner how to do?
1. Make sure the scanner is turned on Bluetooth
2. Verify that the scanner is Bluetooth Serial Port Profile
3. Verify that Bluetooth mode is to connect the scanner to match HID mode or SPP
mode
4. When the scanner is in HID Bluetooth pairing mode connection, two blue lights will
flash, Bluetooth scanner is in SPP mode counterpart connector when a blue light is
blinking and the need to use the test tool in SPP
Bluetooth scanners and mobile phone or computer has been connected, how
paired with the phone or computer again?
1. Select the paired Bluetooth-enabled computer Bluetooth scanner panel, click on
the "Delete" button
(Or cancel paired Bluetooth devices in the Bluetooth cell phone)
2. Set Bluetooth scanner, the scanner goes into pairing Bluetooth status (there are
two ways)
(1) Open the Bluetooth scanner, press 8 seconds until the buzzer short beep twice
Bluetooth indicator
(Blue) flashes quickly
(2) Scan the bar code "into pairing mode" indicator (blue) flashes quickly
3. Finally, follow the steps in front of the respective systems can operate
Not automatically connect after re-plug the Bluetooth adapter or Bluetooth
restart the phone how to do?
To ensure that no case of computer or mobile phone and other Bluetooth devices
earlier, restart the scanner automatically connect Bluetooth
Why SPP connection switching from mode to mode is not HID device?
Confirm whether the device is connected through the HID mode, such as the
connection before, ignore the over-connected device name in the Bluetooth device
search, re-pair connection
How to Change More Scan Settings?
Please contact the manufacturer
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two
conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
common problem
Buzzer mode and description
Blew two seconds:
Bluetooth module initialization error, external EEPROM full
3 sounding voice:
Low battery, the battery voltage is lower than 3.2V
Short beeps 20 times:
External memory initialization error, external EEPROM
read and write errors
Short beeps 1:
Upload Start upload OK, set the Start, Settings OK
Short beeps twice:
Power-OK, RF transmission OK (gun Bluetooth
connection is successful)
Short beeps 3 times:
Bluetooth error (Bluetooth connection failed gun)
Short beeps five times:
Setting error, matching error
LED color and description
Green light and quickly extinguished:
Successfully read the bar code, also issued short beeps
Two blue lights flashing together:
Enter the pattern, waiting for a terminal connected to the
device
A blue light flashes:
Enter the pattern, waiting for a terminal connected to the
device
A steady blue light:
Successful match and connect the device, while short
beeps twice
Red light:
State of charge
Flashing red:
Battery connection is bad
Free declaration
Responsibility for beyond our scope of natural
disasters(such as: earthquakes, floods, etc.)
caused by losses,the company does not undertake
any responsibility.
In any case, for any loss associated with the use
of thisproduct and bring (in accordance with the
instruction manual including loss resulting from
the use of), such as: loss of profits, goodwill,
business interruption, or loss/ change the stored
data, etc. and so any special,incidental,
consequential or indirect losses caused by
the company does not undertake any responsibility.
Loss due to improper use of non-specified by the
Company's communications hardware or software
caused, the Company does not assume any
responsibility.
For by using the message of the product obtained,
data,files, or other products and services, the
company doesnot provide any form of guarantee and
technical support,and for these messages, data,
files, or other products and services to users,
do not assume any responsibility.
For third-party software used in this product, the
company does not undertake any form of guarantee and
technical support responsibilities.
The contents of this manual in accordance with the
"status quo" basis. Unless otherwise required by
applicable law, the Company does not otherwise
accuracy of this document, content and reliability
make any kind, either express or implied warranty