Alacrity Barcode Technology MJR302877 Ring Type Scanner User Manual
Shenzhen Alacrity Barcode Technology Co., Ltd Ring Type Scanner
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3508542 |
| Application ID | d5VQMJERz6muNDbE5yal1w== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 62.42kB (780190 bits) |
| Date Submitted | 2017-08-11 00:00:00 |
| Date Available | 2017-08-11 00:00:00 |
| Creation Date | 2017-08-01 16:53:56 |
| Producing Software | Adobe PDF library 9.90 |
| Document Lastmod | 2017-08-09 18:15:12 |
| Document Title | User Manual |
| Document Creator | Adobe Illustrator CS5 |
Bluetooth Scanner Quick Start Guide Outdoor 50 m viewing distance wireless transmission With a variety of PC Bluetooth a key match Built-in FLASH memory support for HTTP Offline scanning barcodes can store more than 5000 Supports normal mode, counting mode, the mode is not lost, SPP mode and can switch freely Support for Windows XP, Win 7 Win8 / 10 system PC. Android devices, IOS devices Supports the HID protocol, SPP agreement And Android, ios Match system 1. Start Bluetooth scanner, press the Bluetooth button on the scanner or sweep 8 seconds pairing bar code will go into pairing mode [], the connection indicator (blue) flashes rapidly 1. Insert the Bluetooth scanner receivers, the computer will automatically install the Bluetooth receiver to drive (the installation process can not pull out the receiver) 2. Start the Bluetooth scanner, press the Bluetooth scanner 8 seconds or sweep pairing bar code will go into pairing mode [], the connection indicator (blue) flashes rapidly 3. Locate the Bluetooth Computer Control Panel, open the Bluetooth panel, click the Add button 4. Select "My device is set up and ready, you can find", click Next 5. The Add Bluetooth Device Wizard dialog box should appear a Gerneral Bluetooth HID Barcode device icon 6. Double-click Gerneral Bluetooth HID Barcode equipment icon key dialog box appears, choose not to use keys, the next step will begin installing the driver 7. After a successful installation of the Bluetooth device in more than a Gerneral Bluetooth HID Barcode equipment, while Bluetooth scanners short beep sound, this Bluetooth adapter installed 8. pairing is successful, the Bluetooth indicator light blue lights lit scanner And Windows7 Match system 1. Insert the Bluetooth scanner receivers, the computer will automatically install the Bluetooth receiver to drive (the installation process can not pull out the receiver) 2. Start the Bluetooth scanner, press the Bluetooth button on the scanner or sweep 8 seconds pairing bar code will go into pairing mode [], the connection indicator (blue) flashes rapidly And Windows 8 / Windows 10 Match system 1. Insert the Bluetooth scanner receivers, the computer will automatically install the Bluetooth receiver to drive (the installation process can not pull out the receiver) 2. Start the Bluetooth scanner, press the Bluetooth button on the scanner or sweep 8 seconds pairing bar code will go into pairing mode [], the connection indicator (blue) flashes rapidly 3. Locate the "Devices and Printers" in the computer control panel, click on the "Add Device" 3. Open the Control Panel, click on the "Add Device", the computer will search to Gerneral Bluetooth HID Barcode equipment 4. The Add Bluetooth Device Wizard dialog box should appear a Gerneral Bluetooth HID Barcode device icon 4. Double-click the device or click on Next, the computer will automatically install the driver 5. Right-click "Gerneral Bluetooth HID Barcode" device icon "Properties" option, the Properties dialog box appears, click OK. At this point the computer prompts the driver is being installed 5. The driver is installed, Bluetooth scanner indicator (blue) If the bar code gun or a short beep sound, indicating that the Bluetooth scanner has been successfully connected to the computer 6. Wait for the computer to install the driver is complete, the scanner Bluetooth indicator (blue) If the indicator is a Bluetooth scanner and computer connection is successful Barcode mode feature set No loss pattern SPP mode HID (USB) mode Hardware version information Barcode tone sweep to open clear data Serial mode 4. The pairing is successful, the Bluetooth indicator light blue lights lit scanner. Shutdown Mode Data Upload Links pairing mode 2. Open the Bluetooth device to search Gerneral Bluetooth HID Barcode 3. Click on the Bluetooth device, pairing status And Windows XP Match system Bluetooth restore factory settings Barcode sweep tone Close Software version information IOS show hidden keyboard Count mode Normal mode Barcode Upload tone open IOS keyboard keys, double-click Show hidden The total number of data Barcode Upload tone Close Warning! Barcode above Use with caution Sleep Time Setting Language selection (default American English) Buzzer Buzzer mode and description LED color and description Green light and quickly extinguished: Successfully read the bar code, also issued short beeps 3 sounding voice: Low battery, the battery voltage is lower than 3.2V Two blue lights flashing together: Enter the pattern, waiting for a terminal connected to the device Blew two seconds: Bluetooth module initialization error, external EEPROM full Start setting American English 5 minutes Italian language French 30 seconds 10 minutes 60 seconds Short beeps 20 times: External memory initialization error, external EEPROM read and write errors Short beeps 1: Upload Start upload OK, set the Start, Settings OK Russian German Short beeps twice: Power-OK, RF transmission OK (gun Bluetooth connection is successful) Short beeps 3 times: Bluetooth error (Bluetooth connection failed gun) 20 minutes LED lights Short beeps five times: Setting error, matching error A blue light flashes: Enter the pattern, waiting for a terminal connected to the device A steady blue light: Successful match and connect the device, while short beeps twice Red light: State of charge Flashing red: Battery connection is bad 2 minutes No scanner sleep mode common problem Bluetooth scanners and Android phones can not connect how to do? Check that your phone is android 3.0 or more can be directly connected Why are not part of the bar code scanner? Because some not commonly used bar code at the factory default setting is off, you can simply open the corresponding bar code settings can be a normal scan, if you do not know the appropriate type of bar code, please contact the manufacturer Why after pairing bar code can not be uploaded to a computer or cell phone? 1. Verify whether the pairing is successful, the pairing is successful Bluetooth Scanner LED display is blue 2. You have opened the inventory functions (inventory under the bar code does not automatically upload mode, you need to manually sweep the corresponding bar code upload) 3. Change to the normal mode, you can upload one side while scanning Computer or mobile phone search is not a Bluetooth scanner how to do? 1. Make sure the scanner is turned on Bluetooth 2. Verify that the scanner is Bluetooth Serial Port Profile 3. Verify that Bluetooth mode is to connect the scanner to match HID mode or SPP mode 4. When the scanner is in HID Bluetooth pairing mode connection, two blue lights will flash, Bluetooth scanner is in SPP mode counterpart connector when a blue light is blinking and the need to use the test tool in SPP Bluetooth scanners and mobile phone or computer has been connected, how paired with the phone or computer again? 1. Select the paired Bluetooth-enabled computer Bluetooth scanner panel, click on the "Delete" button (Or cancel paired Bluetooth devices in the Bluetooth cell phone) 2. Set Bluetooth scanner, the scanner goes into pairing Bluetooth status (there are two ways) (1) Open the Bluetooth scanner, press 8 seconds until the buzzer short beep twice Bluetooth indicator (Blue) flashes quickly (2) Scan the bar code "into pairing mode" indicator (blue) flashes quickly 3. Finally, follow the steps in front of the respective systems can operate Not automatically connect after re-plug the Bluetooth adapter or Bluetooth restart the phone how to do? Free declaration To ensure that no case of computer or mobile phone and other Bluetooth devices earlier, restart the scanner automatically connect Bluetooth Why SPP connection switching from mode to mode is not HID device? Confirm whether the device is connected through the HID mode, such as the connection before, ignore the over-connected device name in the Bluetooth device search, re-pair connection How to Change More Scan Settings? Please contact the manufacturer FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐‐ Reorient or relocate the receiving antenna. ‐‐ Increase the separation between the equipment and receiver. ‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐‐ Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Responsibility for beyond our scope of natural disasters(such as: earthquakes, floods, etc.) caused by losses,the company does not undertake any responsibility. In any case, for any loss associated with the use of thisproduct and bring (in accordance with the instruction manual including loss resulting from the use of), such as: loss of profits, goodwill, business interruption, or loss/ change the stored data, etc. and so any special,incidental, consequential or indirect losses caused by the company does not undertake any responsibility. Loss due to improper use of non-specified by the Company's communications hardware or software caused, the Company does not assume any responsibility. For by using the message of the product obtained, data,files, or other products and services, the company doesnot provide any form of guarantee and technical support,and for these messages, data, files, or other products and services to users, do not assume any responsibility. For third-party software used in this product, the company does not undertake any form of guarantee and technical support responsibilities. The contents of this manual in accordance with the "status quo" basis. Unless otherwise required by applicable law, the Company does not otherwise accuracy of this document, content and reliability make any kind, either express or implied warranty
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Title : 蓝牙说明书英文版-F Metadata Date : 2017:08:09 18:15:12+08:00 Modify Date : 2017:08:09 18:15:12+08:00 Create Date : 2017:08:01 16:53:56+08:00 Creator Tool : Adobe Illustrator CS5 Thumbnail Width : 256 Thumbnail Height : 112 Thumbnail Format : JPEG Thumbnail Image : (Binary data 14709 bytes, use -b option to extract) Instance ID : uuid:5e084b99-530e-4975-9bde-a7999c5ea27c Document ID : xmp.did:DBF796BD9476E7118834D4C6E9E5E827 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:DAF796BD9476E7118834D4C6E9E5E827 Derived From Document ID : xmp.did:DAF796BD9476E7118834D4C6E9E5E827 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved, saved, saved History Instance ID : xmp.iid:3D1F74B0311BE611B434924F0CEBB58C, xmp.iid:04886EE8BD3EE7118E1FF44B042E12FC, xmp.iid:DAF796BD9476E7118834D4C6E9E5E827, xmp.iid:DBF796BD9476E7118834D4C6E9E5E827 History When : 2016:05:16 15:17:57+08:00, 2017:05:22 15:11:42+08:00, 2017:08:01 16:53:41+08:00, 2017:08:01 16:53:54+08:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5, Adobe Illustrator CS5 History Changed : /, /, /, / Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : C:\Documents and Settings\Administrator\桌面\无休眠.png, C:\Documents and Settings\Administrator\桌面\休眠开始设置.png, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\饿语.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\意大利语.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\德国.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\法语.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\美国.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\5分钟.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\20分钟.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\10分.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\2分钟.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\60秒.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\30秒.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\串口模式.png, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\蓝牙恢复出产设置.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\硬件版本信息.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\软件版本信息.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\关机模式.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\扫到条码提示音关闭.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\条码上传提示音开启.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\扫到条码提示音关闭.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\扫到条码提示音开启.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\IOS键盘按键双击显示隐藏.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\IOS键盘显示隐藏.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\数据上传.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\清除数据.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\数据总数.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\盘点模式.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\SPP模式.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\不丢失模式.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\普通模式.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\HID模式.jpg, C:\Documents and Settings\Administrator\桌面\常用功能设置条码\连接配对模式.jpg, C:\Documents and Settings\Administrator\桌面\图片1.jpg Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : False N Pages : 1 Max Page Size W : 296.001571 Max Page Size H : 235.302778 Max Page Size Unit : Millimeters Font Name : ArialMT, ArialRoundedMTBold, Arial-BoldMT, AdobeSongStd-Light, STCaiyun, SimHei Font Family : Arial, Arial Rounded MT Bold, Arial, Adobe 宋体 Std, 华文彩云, 黑体 Font Face : Regular, Regular, Bold, L, Regular, Regular Font Type : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type Font Version : Version 5.06, Version 1.51, Version 5.06, Version 5.017;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168, Version 1.02, Version 5.01 Font Composite : False, False, False, False, False, False Font File Name : arial.ttf, ARLRDBD.TTF, arialbd.ttf, AdobeSongStd-Light.otf, STCAIYUN.TTF, simhei.ttf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : 鲜艳 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000002 Swatch Groups Colorants Magenta : 90.000004 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 9.90 Page Count : 2 Creator : Adobe Illustrator(R) 15.0 For : admin, Bounding Box : -1 -740 1701 1 Container Version : 11 Creator Version : 15EXIF Metadata provided by EXIF.tools