Alarm Controls UT 1 Instructions Universal Timer Installation
User Manual: Alarm Controls UT-1 Universal Timer Installation Instructions Installation Instructions
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
INSTALLATION INSTRUCTIONS MODEL UT-1 UNIVERSAL TIMER PROGRAMMABLE DIGITAL TIMER FOR ALL TIMING REQUIREMENTS SIXTEEN ADJUSTABLE TIME RANGES FOUR MODES OF OPERATION RANGE FROM ONE SECOND TO ONE HOUR TEMPERATURE RANGE -25C TO +70C S.P.D.T. 12 AMP @ 28 VDC NOISE IMMUNITY ON ALL INPUTS TIME SELECTION TABLE RANGE NUMBER TIME SELECTOR SWITCHES ON = I OFF = O MINIDIP SWITCH SELECTS RANGE AND MODE DELAY ON OPERATE DELAY ON RELEASE ONE SHOT MODE PULSING MODE EXTREME ACCURACY AND REPEATABILITY SPECIFICATIONS TIME RANGE 1 2 3 4 VOLTAGE RANGE: 6 TO 18 VDC CURRENT CONSUMPTION: 37 MA. MAXIMUM TIME RANGE: 1 SECOND TO 1 HOUR TEMPERATURE RANGE: -25C TO +70C CONTACT RATING: 12 AMP. @ 28 VOLTS DC MOUNTING: DOUBLE SIDED FOAM TAPE 1 O O O O 1S - 2M 2 I O O O 3M - 5M 3 O I O O 6M - 9M 4 I I O O 10M - 13M 5 O O I O 14M - 17M 6 I O I O 18M - 22M 7 O I I O 23M - 26M 8 I I I O 27M - 30M 9 O O O I 31M - 34M 10 I O O I 35M - 38M 11 O I O I 39M - 42M 12 I I O I 43M - 46M 13 O O I I 47M - 50M 14 I O I I 51M - 54M 15 O I I I 55M - 58M 16 I I I I 7. ADJUST THE TIME ADJUSTMENT POT TO THE DESIRED TIME IF NECESSARY. 59M - 62M 8. REPEAT STEPS 5 AND 6. MODE SELECTOR SWITCHES ON = I OFF = O MODE 5 6 O O PULSING I O DELAY ON OPERATE O I DELAY ON RELEASE I I ONE SHOT PROCEDURE FOR SETTING DELAY TIME 1. CONVERT THE REQUIRED DELAY TIME TO MINUITES. 2. SELECT RANGE NUMBER IN WHICH DELAY TIME FALLS. 3. POSITION THE TIME SELECTOR SWITCHES TO THE INDICATED REQUIRED SETTINGS ON THE CHART. POSITION THE MODE SELECTOR SWITCHES TO THE I I SETTING. 4. CONNECT THE PROPER INPUT VOLTAGE, 6 TO 18 VDC. 5. START THE TIMER BY APPLYING THE TRIGGER INPUT. 6. THE TIMING LED WILL LIGHT. LED WILL GO OFF WHEN TIMING HAS BEEN COMPLETED. 9. WHEN THE CORRECT TIME HAS BEEN OBTAINED SET THE MODE SELECTOR SWITCHES TO THE DESIRED MODE. Alarm Controls ALARM CONTROLS CORPORATION 19 Brandywine Drive 19 BRANDYWINE DRIVE, DEER PARK, NY 11729 Deer Park, New York 11729 800 645-5538 (800) 645-5538 www.alarmcontrols.com UT-1 UNIVERSAL TIMER MODES OF OPERATION DELAY ON OPERATE THE DELAY TIME BEGINS WHEN THE TRIGGER VOLTAGE IS APPLIED. AT THE END OF THE DELAY TIME, CONTACTS TRANSFER AND REMAIN IN THIS POSITION UNTIL TRIGGER VOLTAGE IS REMOVED. DELAY ON RELEASE THE CONTACTS TRANSFER IMMEDIATELY WHEN TRIGGER VOLTAGE IS APPLIED. THE DELAY BEGINS WITH THE REMOVAL OF THE TRIGGER VOLTAGE. IF THE TRIGGER VOLTAGE IS NOT REMOVED, CONTACTS WILL NOT TRANSFER. ONE SHOT A MOMENTARY OR SUSTAINED APPLICATION OF TRIGGER VOLTAGE WILL CAUSE THE CONTACTS TO TRANSFER AND REMAIN UNTIL THE END OF THE DELAY PERIOD, AT WHITCH TIME CONTACTS WILL RETRANSFER.TRIGGER VOLTAGE DOES NOT HAVE TO BE REMOVED FOR THE CONTACTS TO RE-TRANSFER. PULSING CONTACTS WILL TRANSFER AND RE-TRANSFER WITH EQUAL OPERATE AND RELEASE TIME. PULSING MODE + PWR + GND N/C ONE SHOT MODE N/O TRIGGER PWR VOLTAGE - LAMP OR SOUNDER C TRIG IN + + PWR N/O VOLTAGE - DELAY ON OPERATE DOOR PROP ALARM GND N/O SW. N/O C TRIG IN N/C - N E G VOLTAGE - N/C GND DOOR CONTACT N/O 1K R E S + C BUZZER N/C TRIG IN ONE SHOT MODE N/C TRIGGER + PWR VOLTAGE - GND N/C SW. N/O 1K R E S TRIG IN C N/C ALARM 19CONTROLS CORPORATION BRANDYWINE DRIVE, DEER PARK, NY 11729 800 645-5538 631 586-4220 EMAIL: INFO@ALARMCONTROLS.COM WWW.ALARMCONTROLS.COM - NEG
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : HB Create Date : 2015:08:11 13:29:37-07:00 Modify Date : 2015:08:11 13:29:57-07:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2015:08:11 13:29:57-07:00 Creator Tool : Adobe Illustrator CS6 (Windows) Format : application/pdf Title : UT-1 Instructions Creator : HB Document ID : uuid:b09c21c9-a28a-4afa-bea8-8a38a76b71da Instance ID : uuid:c7bc6afe-b630-45c9-8fc2-570f51f9a132 Producer : Adobe PDF library 10.01 Page Count : 2EXIF Metadata provided by EXIF.tools