Alarm com orporated 143200N25V4 Z-Wave adds control capabillities to home automation and security User Manual CERTIFICATE OF COMPLIANCE
Alarm.com Incorporated Z-Wave adds control capabillities to home automation and security CERTIFICATE OF COMPLIANCE
User Manual
Rhein Tech Laboratories, Inc. Client: Alarm.com
360 Herndon Parkway Model: ADC-200N-EVD
Suite 1400 Standards: FCC 15.249/IC RSS-210
Herndon, VA 20170 ID’s: YL6-143200N25V4/9111A-143200N25V4
http://www.rheintech.com Report #: 2013120DXX
Page 30 of 39
Appendix M: Manual
Please refer to the following pages.
INSTALLATION GUIDE
Regulatory
Required Items for Installations
1)
2)
3)
Account Creation and System Setup
1)
2)
3)
Installation Overview
1) Connect your Building36 system to the Internet
2) Power on the System
3) Add Devices
4) Log into Your Account
http://building36.com/login.aspx
Troubleshooting : Communication Startup
Troubleshooting: LEDs
1. Physical Broadband Connection
2. MAC Filtering
3. DCHP Servers
4. Power Cycle
5. Check
Troubleshooting : LED’s
Bootup
Green LED (WAN/Power)
●
Yellow LED (Inclusion)
Red LED (Remove)
Adding Z-Wave Devices
before
Adding a Z-Wave device to the Building36 Module’s network
(“DEVICE INCLUSION”)
Checking the Device List with Building36
Testing Device Communication with
Building36.com
Deleting a Z-Wave Device (“Device Exclusion”)
Device-Specific Instructions
Lights & Appliances
Evolve Plug-in Lamp & Appliance or Dimmer Module
1)
2)
3) double click
Tips/Troubleshooting:
-
Evolve Wall Mount Switch or Dimmer
1)
2)
3) double click
Tips/Troubleshooting:
-
Evolve Wall Mount Outlet
1)
2)
3) double click
Tips/Troubleshooting:
If
u
sing Building36
gateway
See “Device-Specific Instructions” in this document (or the
instructions that came with the device) for more information.
Success!
If Using Optional
Portable Z-Wave
Controller:
Locks
IMPORTANT NOTE
before you
install the lock on the door
NOTE:
Tips:
before
Kwikset Deadbolt
1)
2)
3)
Important:
4)
5)
Thermostats
Tips:
before
CT-30 and CT-100 Z-Wave thermostats
1)
2)
3)
Troubleshooting
The device will not learn into the system
The device works close to the gateway, but does not work in its final location
.
I don’t want the thermostat to be solely battery powered, but a “C” wire
does not exist from the HVAC unit.
The lock is not securely enrolled
The lock is not reporting back the correct status
Devices are malfunctioning, but range is not the issue
Device Already in Network