Alcatel Lucent Deutschland CMROB66AC2X5 9768 Compact Metro Radio Outdoor B66 2x5W V2 User Manual Hardware Installation Manual

Alcatel-Lucent Deutschland AG 9768 Compact Metro Radio Outdoor B66 2x5W V2 Hardware Installation Manual

Contents

Hardware Installation Manual

Download: Alcatel Lucent Deutschland CMROB66AC2X5 9768 Compact Metro Radio Outdoor B66 2x5W V2 User Manual Hardware Installation Manual
Mirror Download [FCC.gov]Alcatel Lucent Deutschland CMROB66AC2X5 9768 Compact Metro Radio Outdoor B66 2x5W V2 User Manual Hardware Installation Manual
Document ID2871531
Application IDecB5JDH/Nwww2zqZHy8AVA==
Document DescriptionHardware Installation Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize78.27kB (978360 bits)
Date Submitted2016-01-13 00:00:00
Date Available2016-07-12 00:00:00
Creation Date2015-12-03 01:54:08
Producing SoftwareAcrobat Distiller 9.5.5 (Windows)
Document Lastmod2015-12-04 09:55:46
Document TitleAlcatel-Lucent 9768 Compact Metro Radio Outdoor Hardware Installation
Document CreatorALDoc XML R13.0
Document Author: Alcatel-Lucent

Use pursuant to applicable agreements
FCC FILING
Title page
Alcatel-Lucent 9768
Compact Metro Radio Outdoor
Hardware Installation
3MN-CMRO-B66-IMOP
Issue 1 | December 2015
FCC FILING
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
FCC FILING
FCC FILING
Use pursuant to applicable agreements
Legal notice
Legal notice
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective
owners.
The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
Copyright © 2015 Alcatel-Lucent. All rights reserved.
Contains proprietary/trade secret information which is the property of Alcatel-Lucent and must not be made available to, or copied or used by anyone outside
Alcatel-Lucent without its written authorization.
Not to be used or disclosed except in accordance with applicable agreements.
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
About this document
Purpose
.......................................................................................................................................................................................... xiii
xiii
What's new
................................................................................................................................................................................... xiii
xiii
Intended audience
...................................................................................................................................................................... xiii
xiii
Supported systems
..................................................................................................................................................................... xiii
xiii
FCC FILING
Contents
How to use this document ....................................................................................................................................................... xiii
xiii
Safety information
Conventions used
..................................................................................................................................................................... xiv
xiv
....................................................................................................................................................................... xiv
xiv
Related information ................................................................................................................................................................... xvi
xvi
How to order
................................................................................................................................................................................ xvi
xvi
How to comment
........................................................................................................................................................................ xvi
xvi
Safety statements
Overview ...................................................................................................................................................................................... 1-1
1-1
Structure of safety statements ............................................................................................................................................... 1-2
1-2
General safety considerations ............................................................................................................................................... 1-4
1-4
Safety
........................................................................................................................................................................................... 1-5
1-5
Safety - specific hazards ......................................................................................................................................................... 1-6
1-6
Product safety
.......................................................................................................................................................................... 1-10
1-10
Hardware architecture and functionality
Functional description ............................................................................................................................................................. 2-2
2-2
Physical description
................................................................................................................................................................. 2-4
2-4
Supported installation options ............................................................................................................................................ 2-11
2-11
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
iii
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Overview ...................................................................................................................................................................................... 2-1
2-1
FCC FILING
Contents
....................................................................................................................................................................................................................................
Hardware and ancillary items
............................................................................................................................................ 2-14
2-14
Installation
Overview ...................................................................................................................................................................................... 3-1
3-1
Install the 9768 CMRO on a pole or a wall
Overview ...................................................................................................................................................................................... 3-2
3-2
Pre-installation information
.................................................................................................................................................. 3-3
3-3
Installation clearances ............................................................................................................................................................. 3-5
3-5
Procedure 3-1: Pole mount the 9768 CMRO
................................................................................................................ 3-6
3-6
Procedure 3-2: Wall-mount the 9768 CMRO
............................................................................................................. 3-11
3-11
LED State Description
Overview ..................................................................................................................................................................................... A-1
A-1
LED Status for 9768 CMRO
............................................................................................................................................... A-2
A-2
Product conformance statements
Overview ..................................................................................................................................................................................... B-1
B-1
United States compliance
Introduction ................................................................................................................................................................................ B-2
B-2
Federal Communications Commission ............................................................................................................................ B-3
B-3
Product safety conformance statements ........................................................................................................................... B-5
B-5
Antenna exposure statements
.............................................................................................................................................. B-6
B-6
FDA/IEC optical transmitter product compliance statements ................................................................................. B-7
B-7
FCC FILING
Eco-environmental statements
............................................................................................................................................ B-8
B-8
Canadian compliance
Introduction ................................................................................................................................................................................ B-9
B-9
Industry Canada
..................................................................................................................................................................... B-10
B-10
Product safety and exposure .............................................................................................................................................. B-11
B-11
Antenna exposure statements ............................................................................................................................................ B-12
B-12
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
iv
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
....................................................................................................................................................................................................................................
IEC optical transmitter product compliance statements .......................................................................................... B-13
B-13
Eco-environmental statements .......................................................................................................................................... B-14
B-14
Glossary
Index
FCC FILING
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Contents
FCC FILING
FCC FILING
Contents
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
vi
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
1
Terminology ................................................................................................................................................................. xiv
xiv
2-1
9768 CMRO
2-2
Certifications and standards ................................................................................................................................... 2-6
2-3
Environmental parameters ...................................................................................................................................... 2-6
2-6
2-4
Pole-mount installation
2-5
Wall-mount installation ......................................................................................................................................... 2-14
2-14
3-1
Recommended wall anchor materials
A-1
LED interpretations
................................................................................................................................................................ 2-5
2-5
FCC FILING
List of tables
......................................................................................................................................... 2-14
2-14
................................................................................................................ 3-4
................................................................................................................................................. A-2
A-2
FCC FILING
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
vii
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
FCC FILING
List of tables
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
viii
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
2-1
Alcatel-Lucent 9768 CMRO
................................................................................................................................. 2-4
2-2
Alcatel-Lucent 9768 CMRO connection interfaces ...................................................................................... 2-7
2-3
9768 CMRO pole and wall-mount installation
2-4
9768 CMRO daisy chaining installation example
3-1
Mounting bracket ....................................................................................................................................................... 3-3
3-3
3-2
9768 CMRO installation clearances
A-1
LED indicator
............................................................................................ 2-11
FCC FILING
List of figures
...................................................................................... 2-13
................................................................................................................... 3-5
............................................................................................................................................................ A-2
A-2
FCC FILING
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
ix
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
FCC FILING
List of figures
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
3
Installation
3-1
Pole mount the 9768 CMRO
................................................................................................................................ 3-6
3-2
Wall-mount the 9768 CMRO
............................................................................................................................. 3-11
FCC FILING
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
xi
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
List of procedures
FCC FILING
FCC FILING
List of procedures
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
xii
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
FCC FILING
About this document
About this document
Purpose
The purpose of this document is to provide hardware installation instructions for the
Alcatel-Lucent 9768 Compact Metro Radio Outdoor product.
What's new
The reissue reasons are:
Issue number
Issue date
Reason for reissue
December 2015
Standard
Intended audience
The audience for this document is Hardware Installation personnel relating to the
Alcatel-Lucent 9768 Compact Metro Radio Outdoor (9768 CMRO).
Supported systems
This document applies to the following LTE FDD Alcatel-Lucent 9768 Compact Metro
Radio Outdoor B66 (AWS1-3) 2x5W v2 model.
How to use this document
Start with the first chapter and work through the manual to the end. Once you have done
this, you will have carried out the hardware installation completely and in the proper
sequence.
FCC FILING
...................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
xiii
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
About this document
....................................................................................................................................................................................................................................
Listed are terminology and naming conventions that may appear in the 9768 CMRO
documentation.
Table 1
Terminology
The full product name, Alcatel-Lucent 9768 Compact Metro Radio Outdoor B66 (AWS1-3)
2x5W v2, is also referred to as:
•
Alcatel-Lucent 9768 CMRO
•
9768 CMRO
The full product name, Alcatel-Lucent 7705 Service Aggregation Router-Optical (SAR-O), is
also referred to as:
•
Alcatel-Lucent 7705 SAR-O
•
7705 SAR-O
The full product name, Alcatel-Lucent 5620 Service Aware Manager (SAM), is also referred to
as:
•
Alcatel-Lucent 5620 SAM
•
5620 SAM
The terms eNodeB Network Element Manager (NEM), eNodeB NEM, and NEM are used to
describe the eNodeB local maintenance applications.
Safety information
For your safety, this document contains safety statements. Safety statements are given at
points where risks of damage to personnel, equipment, and operation may exist. Failure to
follow the directions in a safety statement may result in serious consequences.
Conventions used
FCC FILING
The following typographical conventions are used in this manual:
Appearance
Description
emphasis
Text that is emphasized
document titles
Titles of books or other documents
file or directory names
The names of files or directories
graphical user interface text
Text that is displayed in a graphical user
interface or in a hardware label
keyboard keys
The name of a key on the keyboard
system input
Text that the user types as input to a system
Command names and text that the user types
or selects as input to a system
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
xiv
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
....................................................................................................................................................................................................................................
Appearance
Description
system output
Text that a system displays or prints
variables
A value or command-line parameter that the
user provides
[]
Text or a value that is optional
{value1 | value2}
{variable1 | variable2}
A choice of values or variables from which
one value or variable is used

Specifies:
•
Text that is time-dependent (such as
release, version, date, or time stamp)
displayed in file and directory names
•
A value that the user supplies
FCC FILING
About this document
Examples:
“The ATM and IP rules files are stored in the
\\
data\user\ samples\rules directory.”
“The list of parameters you must fill in is
provided in a template zip file:
wps-lte-templates-.zip ”
Indicates access to a function through a menu
sequence. The “ > ” (greater than) symbol is
used to represent the succession of menus or
commands selected from the graphical user
interface (GUI) or a PC or Citrix server menu
or task bar item.1
Example:
“Select the Import command of the Template
menu (submenu of Interfaces)…” is indicated
by:
“Select Interfaces > Template > Import…”
The + (plus) symbol is used to form key
combinations that are pressed simultaneously,
such as SHIFT+ALT+L.
Use the “ > ” (greater than) symbol to form
key combinations that are pressed and then
released in sequence, such as ESC>ALT>A.2
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
xv
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
FCC FILING
About this document
....................................................................................................................................................................................................................................
Notes:
1.
Spaces are included on either side of the “ > ” (greater than) symbol when used to represent
the succession of menus or commands from the graphical user interface (GUI) or a PC menu
or task bar item.
2.
Spaces are not included on either side of the “ > ” symbol when used to represent keyboard
key combination that are pressed and then released in sequence.
Related information
Not applicable.
How to order
Not applicable.
How to comment
Note to reviewers: The following "How to comment" text will appear in the final
document when it is published. However, the feedback method described below is for use
only on final documents. Please send your review comments to the author using the
process you were given when you received this draft document.
FCC FILING
To comment on this document, go to the Online Comment Form (http://infodoc.alcatellucent.com/comments/) or e-mail your comments to the Comments Hotline
(comments@alcatel-lucent.com).
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
xvi
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
FCC FILING
Safety statements
Overview
Purpose
This chapter provides general information on the structure of safety instructions and
summarizes general safety requirements.
General safety and residual risk
The equipment has been developed in line with state-of-the-art technology and conforms
with current national and international safety requirements.
The equipment is considered safe during normal operation when safe working practices
are complied with. However, hazards may arise if procedures are not followed correctly
or safe working practices are not complied with.
Contents
Structure of safety statements
1-2
General safety considerations
1-4
Safety
1-5
Safety - specific hazards
1-6
Product safety
1-10
FCC FILING
...................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
1-1
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Safety statements
Structure of safety statements
....................................................................................................................................................................................................................................
Structure of safety statements
Overview
This topic describes the components of safety statements that appear in this document.
General structure
Safety statements include the following structural elements:
MP
CAUTION
Lifting hazard
SA
Lifting this equipment by yourself can result in injury
due to the size and weight of the equipment.
FCC FILING
Always use three people or a lifting device to transport
and position this equipment.
[ABC123]
Item
Structure element
Purpose
Safety alert symbol
Indicates the potential for personal injury
(optional)
Safety symbol
Indicates hazard type (optional)
Signal word
Indicates the severity of the hazard
Hazard type
Describes the source of the risk of damage or
injury
Safety message
Consequences if protective measures fail
Avoidance message
Protective measures to take to avoid the hazard
Identifier
The reference ID of the safety statement
(optional)
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
1-2
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
Structure of safety statements
....................................................................................................................................................................................................................................
Signal words
The signal words identify the hazard severity levels as follows:
Signal word
Meaning
DANGER
Indicates an extremely hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
NOTICE
Indicates a hazardous situation not related to personal injury.
FCC FILING
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
1-3
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Safety statements
FCC FILING
Safety statements
General safety considerations
....................................................................................................................................................................................................................................
General safety considerations
Shock hazards
WARNING
Electric-shock hazard
Some parts of all electrical installations are energized. Failure to follow safe work
practices and the safety warnings may lead to bodily injury and property damage.
For this reason, only trained and qualified personnel (electrical workers as defined in
IEC 60215 or EN 60215 + A1 or in the National Electrical Code or in ANSI/NFPA No.
10) may install or service the installation.
WARNING
Electric-shock hazard
There is a danger of electric shock if the grounding system is inadequate.
FCC FILING
You must comply with the grounding requirements for the grounding system.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
1-4
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
Safety
....................................................................................................................................................................................................................................
Safety
General precautions for installation procedures
WARNING
Failure to observe these safety precautions may result in personal
injury or damage to equipment.
•
•
•
Read and understand all instructions.
Follow all warnings and instructions marked on this product.
Installation and maintenance procedures must be followed and performed by
trained personnel only.
•
The equipment must be provided with a readily accessible disconnect device
as part of site preparation.
Grounding and circuit continuity is vital for safe operation of the equipment.
Never operate the equipment with grounding/bonding conductor
disconnected.
Install only equipment identified in the product's installation manual. Use of
other equipment may result in an improper connection which could lead to
fire or injury.
Use caution when installing or modifying telecommunications equipment.
•
•
•
•
•
•
•
•
•
Before servicing, disconnect power input to reduce the risk of energy
hazards.
For continued protection against risk of fire, all fuses used in this product
must be replaced only with fuses of the same type and rating.
Never install telecommunications equipment during a lightning storm or
when conditions are wet.
Never touch uninsulated wiring or terminals carrying direct current or
ringing current, and never leave this wiring exposed. Protect and tape
uninsulated wiring and terminals to avoid risk of fire, electrical shock, and
injury to personnel.
Never spill liquids of any kind on the product.
To reduce the risk of an electrical shock, do not disassemble the product.
Opening and removing covers and/or circuit boards may expose you to
dangerous voltages or other risks. Incorrect reassembly can cause electrical
shock when the unit is subsequently used.
for PERMANENTLY CONNECTED EQUIPMENT, a readily accessible
disconnect device must be incorporated external to the equipment.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
1-5
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
•
FCC FILING
Safety statements
FCC FILING
Safety statements
Safety - specific hazards
....................................................................................................................................................................................................................................
Safety - specific hazards
Danger
DANGER
Electric-shock hazard
Working in severe weather can result in personal injury or death and damage to the
equipment.
Never install or perform maintenance during severe weather (high winds, lightning,
blizzards, hurricane etc.).
DANGER
Noxious-substance hazard
Use of unspecified cleaning agents can result in personal injury.
Use only specified cleaning agents. Never use flammable solvents.
Always ensure that there is adequate ventilation in the work area and wear the
appropriate personal protective equipment.
Warning
WARNING
Laser hazard
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous laser radiation exposure.
Do not view directly into the laser beam with optical instruments such as a fiber
microscope because viewing of laser emission in excess of Class 1 limits significantly
increases the risk of eye damage.
FCC FILING
Never look into the end of an exposed fiber or an open connector as long as the optical
source is switched on.
Ensure that the optical source is switched off before disconnecting optical fiber
connectors.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
1-6
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
Safety - specific hazards
....................................................................................................................................................................................................................................
WARNING
Electric-shock hazard
Some parts of all electrical installations are energized. Failure to observe this fact and
the safety warnings may lead to bodily injury and property damage.
For this reason, only trained and qualified personnel (electrical workers as defined in
IEC 60215 + A1 or EN 60215) may install or service the installation.
FCC FILING
Safety statements
WARNING
Electric-shock hazard
The power supply lines to the equipment are energized. Contact with parts carrying
current can cause serious injury, possibly including death, even hours after the event.
Turn off and lock out the system power at the disconnect device before working on or
servicing the equipment.
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
Caution
CAUTION
RF hazard
RF exposure in excess of applicable limits can result in personal injury.
Metro Cells are designed and installed in order that they are compliant with the exposure
guidelines laid down by 47 CFR 1.1307 -1.1310.
No other persons shall stay in front of the product at a distance of less than 22 cm.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
1-7
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
For all staff that are required to work in close proximity to the equipment, for example
maintenance personnel, contact with the antenna should be avoided. No such persons
shall stay in front of the product at a distance of less than 8 cm.
FCC FILING
Safety statements
Safety - specific hazards
....................................................................................................................................................................................................................................
CAUTION
Electric-shock hazard
DOUBLE POLE/NEUTRAL FUSING
A fuse is used in the neutral of single-phase equipment either permanently connected or
provided with a non-reversible plug. After operation of the fuse, parts of the equipment
that remain energized might represent a hazard during servicing.
Failure to observe this fact and the safety warnings may lead to bodily injury and
property damage.
CAUTION
Hot-surface hazard
The surfaces of the CMRO can become hot enough to cause burns on unprotected skin.
On the product label, the universal symbol for Hot Surface (shown here) emphasizes this
hazard.
Before handling the unit, wait until its surfaces have cooled and, where the following
conditions apply, ensure that it is mounted out of the public's reach.
FCC FILING
For installations in ambient temperatures exceeding 46° C, surface temperature may
exceed 70° C. In these situations, this equipment is intended for installation where access
is restricted to only qualified service personnel.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
1-8
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
Safety - specific hazards
....................................................................................................................................................................................................................................
Notices
NOTICE
ESD hazard
Semiconductor devices can be damaged by electrostatic discharges (ESD)
The following rules must be complied with when handling any module containing
semiconductor components:
•
•
•
•
•
Wear conductive or antistatic working clothes (for example, coat made of 100%
cotton).
Wear a grounded wrist strap.
Wear shoes with conductive soles on a conductive floor surface or conductive work
mat.
Leave the modules in their original packaging until ready for use.
•
Make sure there is no difference in potential between yourself, the workplace, and the
packaging before removing, unpacking, or packing a module.
Whenever handling ESD-sensitive components, do not touch any connection pins or
tracks.
Place modules removed from the equipment on a conductive surface.
•
•
Test or handle the module only with grounded tools on grounded equipment.
Handle defective modules exactly like new ones to avoid causing further damage.
•
FCC FILING
Safety statements
NOTICE
Condensation
Sudden changes in the weather may lead to the formation of condensation on
components. Operating the unit when condensation moisture is present can destroy the
unit.
Units which show signs of condensation must be dried before installation.
NOTICE
Tools
Make sure after finishing your work that no tools, testing equipment, flashlights, etc.,
have been left in or on the equipment.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
1-9
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Tools left in the working area can cause short circuits during operation which can lead to
the destruction of units.
FCC FILING
FCC FILING
Safety statements
Product safety
....................................................................................................................................................................................................................................
Product safety
Equipment safety
Safety information for this equipment can be found on various Caution, Warning, Danger,
information labels or instructions affixed to or included with the product or included
within this document. Informational and cautionary labels may appear near the item they
address or may be grouped in a single location on the equipment. Warnings are typically
adjacent to the hazard that is noted on the label. The instructions, cautions and warnings
found on these labels must be understood and observed by all personnel involved with the
equipment installation and maintenance.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
1-10
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
FCC FILING
2 ardware architecture
and functionality
Overview
Purpose
This chapter provides a high-level overview of the Alcatel-Lucent 9768 Compact Metro
Radio Outdoor (9768 CMRO) product and functionality.
Contents
Functional description
2-2
Physical description
2-4
Supported installation options
2-11
Hardware and ancillary items
2-14
FCC FILING
...................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
2-1
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Hardware architecture and functionality
Functional description
....................................................................................................................................................................................................................................
Functional description
Overview
The Alcatel-Lucent 9768 Compact Metro Radio Outdoor product is a next-generation
Metro Radio Outdoor product that:
•
•
•
•
provides 10x the output power at half the size when compared with the Alcatel-Lucent
9768 Metro Radio Outdoor (9768 MRO)
enables mobile service providers (MSPs) to deliver cost-effective capacity to urban
hotspots, for example, stadiums, campuses, train stations, bus stops, and other urban
environments
provides affordable coverage to rural locations
is designed to be deployed as an overlay in an existing macro coverage area to
provide increased coverage in public open spaces.
9768 CMRO
with Solar Shield
9768 CMRO
without Solar Shield
Product features and capabilities
FCC FILING
The product features and capabilities in this release are:
•
•
•
Supports band 66 (B66) with a reduced high-end (WRHE) of 2180 MHz and a
10-MHz guard band instead of a 2200 MHz high-end
Supports LTE FDD
Supports the following LTE carriers:
– 5 MHz
–
10 MHz
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
2-2
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
Functional description
....................................................................................................................................................................................................................................
•
– 15 MHz
– 20 MHz
Supports the AWS-1 frequency range (AWS-4 frequency range is not supported)
Note: The 9768 CMRO is hardware ready to support the entire AWS-1/3 frequency
range. In the LR15.1.L release, only AWS-1 is fully supported.
•
Supports UL of 1710 MHz to 1780 MHz (70 MHz), and DL of 2110 MHz to 2180
MHz (70 MHz)
•
•
•
2x5 W total power at antenna connector
Standard 2x2 MIMO configurations, 2-Tx, and 2-Rx diversity
Supports plug-and-play (PnP) to connect automatically to the network
•
•
Supports CPRI fronthaul and daisy chaining of up to four 9768 CMROs
CSA, FCC, and IP65 certifications
FCC FILING
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
2-3
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Hardware architecture and functionality
FCC FILING
Hardware architecture and functionality
Physical description
....................................................................................................................................................................................................................................
Physical description
Overview
The Alcatel-Lucent 9768 Compact Metro Radio Outdoor is housed in an Alcatel-Lucent
designed metallic case, adhering to NEMA Type-4 enclosure standard. The product is
designed to be deployed close to users, usually in outdoor environments, such as on light
poles or building walls, with a vertical profile that hides cable connectors and mounting
kit for a smooth integration into the surrounding environment.
The 9768 CMRO product is shown in the following figure.
Figure 2-1 Alcatel-Lucent 9768 CMRO
9768 CMRO
(Front view with
Solar Shield)
9768 CMRO
(Rear view)
Weights and dimensions
FCC FILING
The physical dimensions of the Alcatel-Lucent 9768 CMRO are:
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
2-4
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
Physical description
....................................................................................................................................................................................................................................
Depth
9768 CMRO
bottom view
FCC FILING
Hardware architecture and functionality
Width
9768 CMRO
front view with
Solar Shield
Height
Table 2-1
9768 CMRO
180 mm (7.1 in)
Height
265 mm (10.4 in)
Depth
135 mm (5.3 in), including Solar Shield
Volume
6.5 L
Weight
6.8 kg (15 lb)
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
2-5
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Width
FCC FILING
Hardware architecture and functionality
Physical description
....................................................................................................................................................................................................................................
Environmental and regulatory specifications
Table 2-2
Certifications and standards
Safety
CSA
Radio
FCC
Environmental
IP65
Table 2-3
Environmental parameters
Temperature range
- 40°C to +50°C (+55°C with Solar Shield)
Relative humidity
5% to 100%
Main units
The 9768 CMRO consists of four main units, which are responsible for radio, RF
filtering, fronthaul, and power supply functions.
Unit
Function
MOAD2 board
SFP modules and power forwarding:
Radio board
RF filter
FCC FILING
Power Supply Unit
(PSU)
•
Two CPRI SFP ports
•
5.3-V to 3.3-V power convertor
Radio:
•
LTE Band 66
•
Two mini-DIN 4.3-10 external RF antenna connectors
RF antenna filter that supports:
•
B66 (WRHE) UL frequency range from 1710 MHz to 1780
MHz
•
B66 (WRHE) DL frequency range from 2110 MHz to 2180
MHz
•
PSU AC variant - Internal power module unit provides
AC-to-DC conversion (5.3-V output) to the MOAD2 board.
•
PSU DC variant - Internal power module unit provides
DC-to-DC conversion (5.3-V output) to the MOAD2 board.
The MOAD2 board distributes 5.3-V output and provides secondary
DC-to-DC conversion to generate all other (lower) voltages needed
within the board.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
2-6
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
Physical description
....................................................................................................................................................................................................................................
Connection interfaces
The following figure shows the connection interfaces of the 9768 CMRO.
Figure 2-2 Alcatel-Lucent 9768 CMRO connection interfaces
Grounding
point
RF antenna
connector
FCC FILING
Hardware architecture and functionality
RF antenna
connector
Power
connector
9768 CMRO (bottom view)
CPRI 2 for
daisy chaining
CPRI 1 for
fronthaul
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
2-7
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
9768 CMRO (rear view)
FCC FILING
Hardware architecture and functionality
Physical description
....................................................................................................................................................................................................................................
Connection location
Description
9768 CMRO (bottom)
Power supply connector (AC or DC)
Two mini-DIN 4.3-10 RF antenna connectors
Grounding point
9768 CMRO (rear)
Two CPRI SFP ports; “CPRI 1” and “CPRI 2”
“CPRI 1” is used to connect to the BBU or to daisy-chain with
another 9768 CMRO and “CPRI 2” is used to daisy chain to the
next 9768 CMRO
Power supply
The Alcatel-Lucent 9768 CMRO product supports either AC or DC external power input.
9768 CMRO
Power supply details
AC variant
AC power supply that operates from a single phase, three-wire voltage
source in the 95 to 265 Volt range.
The AC power is surge protected internally, and conforms to IEC
60364-1 and GR-1089-Core, Issue 6, Section 4.6.2, Table 4-2 Surge
Test #20.
Fully configured and operating at maximum levels, the product
consumes 100 W. Typical power consumption is 85 W.
DC variant
-48-V DC power supply that operates over the voltage range from
-40-V DC to -57-V DC.
The DC power is surge protected internally, and conforms to GR-1089,
Issue 6, Appendix B for Port Type 8a.
Fully configured and operating at maximum levels, the product
consumes 100 W. Typical power consumption is 85 W.
Fronthaul interface
FCC FILING
The fronthaul interface is at the back of the 9768 CMRO supporting two optical CPRI
SFP ports:
•
•
The “CPRI 1” SFP port (CPRI input port) is used to connect to the BBU or to the
daisy chaining port of another 9768 CMRO.
The “CPRI 2” SFP port (Daisy chaining output port) is used for daisy chaining to
another 9768 CMRO.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
2-8
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
Physical description
....................................................................................................................................................................................................................................
CPRI 2 for
daisy chaining
9768 CMRO (rear view)
CPRI 1 for
fronthaul
FCC FILING
Hardware architecture and functionality
9768 CMRO (rear view)
RF antenna
The Alcatel-Lucent 9768 CMRO supports two external antenna connectors (type
mini-DIN) at the bottom of the enclosure supporting external RF antennas. The external
RF antennas are customer supplied.
External RF antennas
The 9768 CMRO supports a single multi-color LED which is located on the rear lower
portion of the casing. The LED is not intended for use during normal operation of the
equipment. However, it can provide a visual status of the unit during initial installation
and commissioning.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
2-9
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Status indicators
FCC FILING
Hardware architecture and functionality
Physical description
....................................................................................................................................................................................................................................
LED indicator
9768 CMRO
(rear view)
Product labeling
FCC FILING
The Alcatel-Lucent 9768 CMRO product label provides the following information:
•
•
•
•
Model name
Part number
Serial number
Power input range
•
Environmental marking (WEEE/RoHS) applicable to the device
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
2-10
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
Supported installation options
....................................................................................................................................................................................................................................
Supported installation options
Overview
The following section describes the supported installation options for the Alcatel-Lucent
9768 CMRO product. The supported installation options include:
•
•
Standard installation options for 9768 CMRO (pole and wall-mount installation).
Daisy chain installation options, where up to four 9768 CMROs can be daisy-chained
together and share the same fronthaul port.
FCC FILING
Hardware architecture and functionality
Standard installation options
The standard installation options include pole (light poles, lamp posts, and so on) and
wall-mount (building walls) installations.
Figure 2-3 9768 CMRO pole and wall-mount installation
Pole-mount installation
Wall-mount installation
Daisy chain installation options
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
2-11
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
In a daisy chain installation option, up to four 9768 CMROs can be daisy chained
together, where they share the same fronthaul port, thus reducing the investment cost
needed to connect the 9768 CMROs to the fronthaul network and aggregating the uplink
and downlink traffic.
FCC FILING
Hardware architecture and functionality
Supported installation options
....................................................................................................................................................................................................................................
Daisy chaining of 9768 CMRO units is supported only with macro eNodeB BBUs (not
with 976x Metro Cells). The following table provides the supported 9768 CMRO daisy
chaining configurations for a BBU hardware configuration and CPRI rate:
CPRI
rate/BBU
HW
configuration
CPRI rate 3
CPRI rate 5
CPRI rate 7
eCCM2-HR Up to four 9768 CMROs can be daisy chained at 5 MHz, 10 MHz, 15 MHz or 20
MHz carrier bandwidth
+ bCEM
P1.1
Not supported
eCCM2 +
bCEM
P1.1
•
Up to four 9768 CMROs can be daisy chained at
5 MHz or 10 MHz carrier bandwidth
•
Up to two 9768 CMROs can be daisy chained at
15 MHz or 20 MHz carrier bandwidth
bCAM2 +
bCEM2
Up to four 9768 CMROs can be daisy chained at 5 MHz, 10 MHz, 15 MHz or 20
MHz carrier bandwidth
Note: Mixed BBU configurations do not support daisy chaining.
The BBU and all of the RFMs on the daisy chain, including 9768 CMROs, auto-negotiate
to use the same CPRI rate when the system starts. CPRI line rates along a daisy chain are
uniform and determined by the rate on the first segment. If the BBU wants to change the
CPRI line rate for the daisy chain, each RFM starts its master interface only if the slave
interface is up and uses only the line rate of the slave interface.
The daisy-chained 9768 CMROs can be co-located or separated by some distance. The
actual distance depends on the BBU, SFP, and fiber optic cable configuration used for the
daisy chain. Refer to, “Hardware and ancillary items” (p. 2-14) for supported SFPs and
fiber optic cable types and lengths.
FCC FILING
The 9768 CMRO supports two optical CPRI SFP ports at the back; one for fronthaul
(“CPRI 1” port) and the other for daisy chaining (“CPRI 2” port).
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
2-12
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
Supported installation options
....................................................................................................................................................................................................................................
Figure 2-4 9768 CMRO daisy chaining installation example
FCC FILING
Hardware architecture and functionality
BBU
FCC FILING
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
2-13
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Hardware architecture and functionality
Hardware and ancillary items
....................................................................................................................................................................................................................................
Hardware and ancillary items
Overview
The following section lists the Alcatel-Lucent 9768 CMRO base hardware equipment, the
installation kits, and ancillary items that can be ordered from Alcatel-Lucent.
9768 CMRO base items
The product packaging contains the following base items:
•
•
•
9768 CMRO
9768 CMRO mounting frame
9768 CMRO basic installation kit
Ancillary items
The following tables list the ancillary items that are available for order from
Alcatel-Lucent in support of the defined equipment installation and configuration options.
Required installation items
The following table lists the installation items required and available for order from
Alcatel-Lucent in support of the equipment installation options. Each item must be
ordered separately.
Table 2-4
Pole-mount installation
Item
Description
Use
9768 CMRO base items
9768 CMRO
Mandatory
9768 CMRO mounting frame
9768 CMRO basic installation kit
Tool for metal band
FCC FILING
Bracket metal band kit
Table 2-5
Standard BAND-IT® Banding Tool
(CR00169), including operating
instructions
Mandatory for pole-mount only
Stainless steel bands
Mandatory
Band buckles (Ear-Lokt)
Attach the9768 CMRO or vertical tilt
bracket to a pole (diameter 50 mm to 300
mm) using stainless steel bands.
Tighten the bracket metal band around the
pole
Wall-mount installation
Installation kit
Description
Use
9768 CMRO base items
9768 CMRO
Mandatory
9768 CMRO mounting frame
9768 CMRO basic installation kit
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
2-14
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
Hardware and ancillary items
....................................................................................................................................................................................................................................
Power
Item
Description
Use
Cable assembly (AC) for
NAR market
3x16AWG
Mandatory for 9768 CMRO module with
AC power
Cable assembly (DC) for
NAR market
Power connector (AC) for
non-NAR market
Power connector assembled with the
power cable. Available in four
lengths: 2 m, 4.5 m, 9 m and 12 m
3x16AWG
Power connector assembled with the
power cable. Available in four
lengths: 2 m, 4.5 m, 9 m and 12 m
AC power connector
Applicable to NAR market only
Required for 9768 CMRO module with
DC power
FCC FILING
Hardware architecture and functionality
Applicable to NAR market only
Mandatory for 9768 CMRO module with
AC power
Applicable to non-NAR market only
Power connector (DC) for
non-NAR market
DC power connector
Mandatory for 9768 CMRO module with
DC power
Applicable to non-NAR market only
Power cable for non-NAR
market
Power cable IN/OUT 3x1,5-mm²
Available in 100 m roll or per meter
Mandatory for 9768 CMRO module with
both AC or DC power
Applicable to non-NAR market only
Grounding cable
Item
Description
Use
Ground cable for NAR market
Ground cable Y/G, NAR 8AWG
LSZH
Mandatory
Applicable to NAR market only
Available in any length (in meters)
Ground cable for non-NAR
market
Ground cable Y/G 10 mm² in 100 m
roll
Mandatory
Item
Description
Use
SFP module
SFP CPRI Rate 3-7 - 1310 nm SMDF (1 km, 4 km)
Optical fronthaul, Daisy chaining
SFP module
SFP CPRI Rate 3-7 - 1310 nm SMDF (10 km)
Optical fronthaul, Daisy chaining
Applicable to non-NAR market only
SFP modules
FCC FILING
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
2-15
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Hardware architecture and functionality
Hardware and ancillary items
....................................................................................................................................................................................................................................
OCTIS connector
Item
Description
Use
OCTIS plug kit for SFP
transceiver
OCTIS connector
Mandatory
One each for fronthaul and daisy chaining
ports
Protects SFP and cabling from
environmental damage.
External RF antenna
Item
Description
Use
External RF antenna
External RF antenna for the 9768
CMRO.
Mandatory
To be supplied by the customer.
FCC FILING
Fiber optic cable for fronthaul
Item
Description
Use
Fiber Optic cable
SMDF LC-LC 2SM 1-m
Mandatory
Fiber Optic cable
SMDF LC-LC 2SM 2.5-m
Fiber Optic cable
SMDF LC-LC 2SM 5-m
Single mode fiber duplex.
67-mm/250-mm Breakout, Outer
diameter: 5-7-mm, OFNR-LS
Fiber Optic cable
SMDF LC-LC 2SM 15-m
Use for Single Mode link (select cable
length)
Fiber Optic cable
SMDF LC-LC 2SM 30-m
Fiber Optic cable
SMDF LC-LC 2SM 50-m
Fiber Optic cable
SMDF LC-LC 2SM 70-m
Fiber Optic cable
SMDF LC-LC 2SM 85-m
Fiber Optic cable
SMDF LC-LC 2SM 100-m
Fiber Optic cable
SMDF LC-LC 2SM 150-m
Fiber Optic cable
SMDF LC-LC 2SM 200-m
Fiber Optic cable
SMDF LC-LC 2SM 250-m
Fiber Optic cable
SMDF LC-LC 2SM 300-m
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
2-16
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
Hardware and ancillary items
....................................................................................................................................................................................................................................
Fiber optic cable for daisy chaining
Item
Description
Use
Fiber Optic cable
SMDF LC-LC 2SM 1-m
Optional
Fiber Optic cable
SMDF LC-LC 2SM 2.5-m
Fiber Optic cable
SMDF LC-LC 2SM 5-m
Single mode fiber duplex. 67-mm/67-mm
Breakout, Outer diameter: 5-7-mm,
OFNR-LS
Fiber Optic cable
SMDF LC-LC 2SM 15-m
Use for Single Mode link (select cable
length)
Fiber Optic cable
SMDF LC-LC 2SM 30-m
Fiber Optic cable
SMDF LC-LC 2SM 50-m
Fiber Optic cable
SMDF LC-LC 2SM 70-m
Fiber Optic cable
SMDF LC-LC 2SM 85-m
Fiber Optic cable
SMDF LC-LC 2SM 100-m
Fiber Optic cable
SMDF LC-LC 2SM 150-m
Fiber Optic cable
SMDF LC-LC 2SM 200-m
Fiber Optic cable
SMDF LC-LC 2SM 250-m
Fiber Optic cable
SMDF LC-LC 2SM 300-m
FCC FILING
Hardware architecture and functionality
Solar Shield
Item
Description
Use
Solar Shield
Solar Shield for 9768 CMRO
Mandatory unless the 9768 CMRO is
installed indoors or protected in an
enclosure.
FCC FILING
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
2-17
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
FCC FILING
Hardware architecture and functionality
Hardware and ancillary items
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
2-18
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
FCC FILING
Installation
Overview
Purpose
This chapter provides the instructions for mounting the Alcatel-Lucent 9768 Compact
Metro Radio Outdoor onto either a pole or wall.
Contents
Install the 9768 CMRO on a pole or a wall
3-2
Pre-installation information
3-3
Installation clearances
3-5
Procedure 3-1: Pole mount the 9768 CMRO
3-6
Procedure 3-2: Wall-mount the 9768 CMRO
3-11
FCC FILING
...................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
3-1
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Installation
Install the 9768 CMRO on a pole or a wall
Overview
....................................................................................................................................................................................................................................
Install the 9768 CMRO on a pole or a wall
Overview
Purpose
This section provides pre-installation checks for required tools and materials, installation
clearances as well as procedures to be performed before installing the Alcatel-Lucent
9768 Compact Metro Radio Outdoor product.
FCC FILING
Contents
Pre-installation information
3-3
Installation clearances
3-5
Procedure 3-1: Pole mount the 9768 CMRO
3-6
Procedure 3-2: Wall-mount the 9768 CMRO
3-11
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
3-2
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
Pre-installation information
....................................................................................................................................................................................................................................
Pre-installation information
Verify site preparation
The following site preparation requirements should be checked and met before the
installation of the equipment can begin:
•
•
•
•
•
Ensure that equipment is planned to be installed as high as possible to avoid
obstructions.
Consider nearby sources of interference. Also check possibility of future obstructions.
FCC FILING
Installation
Install the 9768 CMRO on a pole or a wall
Ensure that adequate clearance is provided for service access.
Ground, power, and fronthaul cabling has been routed and is in place.
Ensure all site-specific fixing materials (screws, washers, wall plugs) for pole or wall
mounting the equipment are available.
Product delivery contents
Unpack and examine the product packaging contents. If you notice any damage, or
missing items as listed in the Packing List, immediately notify the carrier that delivered
the unit and contact your Alcatel-Lucent representative.
The product packaging contains the following items:
•
The Alcatel-Lucent 9768 Compact Metro Radio Outdoor
Installation materials
In addition to the standard product deliverable ensure the appropriate mounting brackets,
installation kits, and ancillary items are available to support the product mounting
options.
Figure 3-1 Mounting bracket
Locking screw
Hinged plate
Mounting lugs
Mounting lugs
FCC FILING
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
3-3
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Installation
Install the 9768 CMRO on a pole or a wall
Pre-installation information
....................................................................................................................................................................................................................................
Table 3-1
Recommended wall anchor materials
Surface structure
Recommended anchor materials
Recommended screw torque
Wood
Screw Hex T M8x70 stainless steel (x4)
7.0 N.m (62.0 lb.in).
Washer plain M8x16x1.6 stainless steel (x4)
Concrete
Screw CHC M6x80 stainless steel (x4)
7.0 N.m (62.0 lb.in).
Washer plain M6x12x1.6mm stainless steel (x4)
Washer spring M6x12x1.2mm stainless steel (x4)
Plug expansion Rawlnut M6x50 (x4)
Tools required for installation
FCC FILING
The following tools are used during installation:
•
•
•
•
Drill (pneumatic hammer) and assorted drill bits
Pliers
Adjustable spanners
M17 socket wrench
•
•
Screwdrivers (power and/or manual):
– Phillips (flat blade)
– Torx (T-25 and T-40)
HRS (Hirose) HT206/TM21p-88p crimping tool (for RJ45 cable)
•
•
•
Data cable tester for shielded RJ45 (optional)
Measuring tape
Digital compass (to aid establishing product orientation)
•
•
•
•
•
Marker, to mark wall mounting holes
Vacuum cleaner or equivalent (required for clearing debris from wall mounting holes)
Spirit level
Hammer
PIB (self-amalgamating) tape and 3M Super 33+ vinyl tape
•
•
•
Ear protectors and safety goggles or glasses
Assorted cable ties (various lengths)
Heavy duty tape
•
Adjustable straps
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
3-4
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
Installation clearances
....................................................................................................................................................................................................................................
Installation clearances
Minimum installation clearances
The following provides the minimum wall mount clearances recommended around the
Alcatel-Lucent 9768 Compact Metro Radio Outdoor.
Figure 3-2 9768 CMRO installation clearances
Top clearance
400mm (15.7 5 inches)
Rear clearance
20mm (0.79 inches)
FCC FILING
Installation
Install the 9768 CMRO on a pole or a wall
Side clearance
400mm (15.75 inches)
Front clearance
460mm (18.11 inches)
Side clearance
400mm (15.75 inches)
Bottom clearance
400mm (15.75 inches)
Compact
Metro Radio
Outdoor
Clearances mm
(inches)
Comment
Sides (left and
right)
400 mm (15.75 inch)
Access to secure the solar shield cover.
Top
400 mm (15.75 inch)
Access to cable connections and cable
bending radius.
To aid natural air convection.
400 mm (15.75 inch)
To aid natural air convection.
Front
460 mm (18.11 inch)
Access to secure the solar shield cover.
Rear
20 mm (0.79 inch)
For the wall mounting space.
To aid natural air convection.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
3-5
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Bottom
FCC FILING
Installation
Install the 9768 CMRO on a pole or a wall
Procedure 3-1: Pole mount the 9768 CMRO
....................................................................................................................................................................................................................................
Procedure 3-1: Pole mount the 9768 CMRO
Purpose
This topic describes the procedures to be followed when installing the 9768 CMRO onto
a pole using pole bands.
Prerequisites
A site survey has been conducted and a location for the device has been selected that is
both central to the public space and elevated in order to maximize coverage. Before
installation begins, ensure the following:
•
Ensure adequate clearance is provided for service access.
•
•
•
Ground cable has been routed and the site grounding system is in place.
Fronthaul cable has been routed and is in place.
Any site-specific fixing materials are available (for example, bolts, washers and wall
plug materials).
Attention: The 9768 CMRO must be mounted with the appropriate mounting
hardware suitable for the various supporting structures, building materials and
construction methods. Following a site survey, it is the responsibility of the customer
to ensure that:
•
•
The installation support structure is adequate and compliant with ICC IBC (2012):
International Building Code, and all other national and local codes.
The appropriate mounting hardware and any necessary recommended supporting
anchor fixings are used.
Mounting requirements and materials
The 9768 CMRO can be easily mounted onto a wooden or metal pole. Refer to the
following for the installation kits, anchor materials, and tools for the installation type:
•
For pole-mount refer to, Table 2-4, “Pole-mount installation” (p. 2-14) .
•
For a list of standard tools required to support the installation, see “Tools required for
installation” (p. 3-4).
FCC FILING
Before you begin
•
Record the 9768 CMRO 18-digit serial number before mounting onto a pole.
•
Ensure that the optic fiber cable and SFPs are inspected and cleaned.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
3-6
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
Procedure 3-1: Pole mount the 9768 CMRO
....................................................................................................................................................................................................................................
Pole mount the 9768 CMRO
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof and so on.)
follow safe work practices and wear appropriate fall protection equipment.
FCC FILING
Installation
Install the 9768 CMRO on a pole or a wall
Perform the following procedure to pole-mount the 9768 CMRO using standard pole
bands.
...................................................................................................................................................................................................
Assemble the OCTIS connector with the fiber optic cable. Refer to the installation
instructions provided with the OCTIS connector.
...................................................................................................................................................................................................
Connect the OCTIS connector with the fiber optic to the 9768 CMRO CPRI ports.
...................................................................................................................................................................................................
Refer to the equipment orientation plan and, at the selected installation point on the pole,
mark the upper and lower position of the pole bands. Using digital compass, determine
the planned left or right orientation of the 9768 CMRO mounting bracket around the pole
and mark the center line of the left or right orientation on the pole.
...................................................................................................................................................................................................
Using the supplied stainless steel pole bands insert and thread the open band ends into the
upper and lower slots on the reverse side of the mounting bracket.
...................................................................................................................................................................................................
At the marked installation point on the pole place the bands around the pole at the
determined height. Carry-out any required adjustment of the mounting bracket around the
pole so that it is pointing in the desired direction.
...................................................................................................................................................................................................
Ensure that the mounting bracket is in the correct position and orientation.
Secure the band around the pole with two loops. Manually tighten the band around the
pole.
...................................................................................................................................................................................................
Slowly tighten the band further to the pole using the BAND-IT® tool, while placing your
finger at the band buckle bridge to feel the movement of the band through the buckle.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
3-7
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
...................................................................................................................................................................................................
FCC FILING
Installation
Install the 9768 CMRO on a pole or a wall
Procedure 3-1: Pole mount the 9768 CMRO
....................................................................................................................................................................................................................................
Place your finger at the
buckle bridge to feel the
movement of the metal band
Note: Refer to BAND-IT ® C00169 Hand Tool Operation Instructions, PO5886 or
watch the YouTubeTM video (https://www.youtube.com/watch?v=3nLfRYjlnKU) on
how to use the BAND-IT® tool.
...................................................................................................................................................................................................
Once the band stops moving through the buckle, immediately stop tightening the band.
Attention: Excessive tightening of the band around the pole can damage the pole.
...................................................................................................................................................................................................
10
Check whether the banding is secure, there is no movement of the bracket around the pole
and that the banding stubs (cut ends) are flattened down with a hammer.
...................................................................................................................................................................................................
11
To attach the 9768 CMRO to the mounting bracket open the mounting frame lever by
pulling the lever outwards.
...................................................................................................................................................................................................
FCC FILING
12
Align the mounting points on the reverse side of the 9768 CMRO with the mounting lugs
on the bracket. Attach the 9768 CMRO to the bracket by sliding the 9768 CMRO
forwards and downwards onto the bracket mounting lugs.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
3-8
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
Procedure 3-1: Pole mount the 9768 CMRO
....................................................................................................................................................................................................................................
FCC FILING
Installation
Install the 9768 CMRO on a pole or a wall
...................................................................................................................................................................................................
13
Secure the 9768 CMRO onto the mounting frame by tightening the lever retaining screw.
Tighten the lever
retaining screw
...................................................................................................................................................................................................
14
...................................................................................................................................................................................................
15
Route the ground cable from the ground system to the 9768 CMRO and Connect the
ground lug to the grounding point on the 9768 CMRO using the supplied M6 screws, lock
washers, and flat washers. Use antioxidant at the grounding pads.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
3-9
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Finally, check the 9768 CMRO is correctly locked into position and there is no movement
of the module on the mounting frame.
FCC FILING
Installation
Install the 9768 CMRO on a pole or a wall
Procedure 3-1: Pole mount the 9768 CMRO
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
16
Connect the external RF antennas to the mini-DIN 4.3-10 RF antenna connectors on the
bottom of the 9768 CMRO. Refer to the RF antenna mounting instructions included with
the RF antenna kit for the steps to mount the antennas.
...................................................................................................................................................................................................
17
If required, assemble the AC or DC power connector with the power cable. If the power
connector is already assembled with the power cable, skip this step.
...................................................................................................................................................................................................
18
Plug the power connector on the power cord into the power connector on the bottom of
the 9768 CMRO unit.
...................................................................................................................................................................................................
19
Verify that mounted equipment is secure and that no unintentional mechanical alteration
has occurred to either the equipment itself or the installation infrastructure.
...................................................................................................................................................................................................
20
Ensure that all the exterior connections are secure.
...................................................................................................................................................................................................
21
Finally, inspect the site for loose tools, materials, and parts. Remove all such loose tools,
materials, and parts.
E...................................................................................................................................................................................................
N D O F S T E P S
Standard pole-mount examples
FCC FILING
The following figure depicts a 9768 CMRO standard pole mount using pole bands.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
3-10
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
Procedure 3-2: Wall-mount the 9768 CMRO
....................................................................................................................................................................................................................................
Procedure 3-2: Wall-mount the 9768 CMRO
Purpose
This topic describes the procedures to be followed when installing the 9768 CMRO onto
a wall or solid flat surface
Prerequisites
FCC FILING
Installation
Install the 9768 CMRO on a pole or a wall
A site survey has been conducted and a location for the device has been selected that is
both central to the public space and elevated in order to maximize coverage. Before
installation begins, ensure the following:
•
Ensure that adequate clearance is provided for service access.
•
•
•
Ground cable has been routed and the site grounding system is in place.
Fronthaul cable has been routed and is in place.
All site-specific fixing materials are available (for example, bolts, washers, and wall
plug materials).
Attention: The 9768 CMRO must be mounted with the appropriate mounting
hardware suitable for the various supporting structures, building materials and
construction methods. Following a site survey, it is the responsibility of the customer
to ensure that:
•
•
The installation support structure is adequate and compliant with ICC IBC (2012):
International Building Code, and all other national and local codes.
The appropriate mounting hardware and any necessary recommended supporting
anchor fixings are used.
Mounting requirements and materials
The 9768 CMRO can be easily mounted onto solid concrete or wooden flat surface. Refer
to the following for the installation kits, anchor materials, and tools for the installation
type:
•
For wall mount, refer to Table 2-5, “Wall-mount installation” (p. 2-14) .
•
For a list of standard tools required to support the installation, see “Tools required for
installation” (p. 3-4).
•
•
Record the 9768 CMRO 18 digit serial number before mounting onto a wall or flat
surface.
Ensure that the optic fiber cable and SFPs are inspected and cleaned.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
3-11
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Before you begin
FCC FILING
Installation
Install the 9768 CMRO on a pole or a wall
Procedure 3-2: Wall-mount the 9768 CMRO
....................................................................................................................................................................................................................................
Wall-mount the 9768 CMRO
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof and so on) follow
safe work practices and wear appropriate fall protection equipment.
NOTICE
Equipment damage hazard
Damaged connectors may lead to operational issues.
The 976x Metro product must be transported by holding its body and not by any
connectors or pre-attached cables.
Perform the following procedure to wall-mount the 9768 CMRO to a wall or flat surface.
...................................................................................................................................................................................................
Assemble the OCTIS connector with the fiber optic cable. Refer to the installation
instructions provided with the OCTIS connector.
...................................................................................................................................................................................................
Connect the OCTIS connector with the fiber optic to the 9768 CMRO CPRI ports.
...................................................................................................................................................................................................
At the selected installation location, mark the points on the wall for the mounting bracket
anchor holes. See the following drill hole pattern for reference:
...................................................................................................................................................................................................
Check the horizontal marked position of the holes with a spirit level.
...................................................................................................................................................................................................
FCC FILING
Drill two upper holes and two lower holes at the marked points to the appropriate depth.
Insert screw anchor plugs into the drilled holes and, using a hammer, tap home until the
plugs are flush with the wall.
...................................................................................................................................................................................................
Align the mounting bracket bolt holes with the drilled wall anchor holes. Screw in the
upper and lower bolts into the wall fixings to the appropriate depth so that the mounting
bracket is securely attached to the wall.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
3-12
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
Procedure 3-2: Wall-mount the 9768 CMRO
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
To attach the 9768 CMRO to the mounting bracket open the mounting frame lever by
pulling the lever outwards.
...................................................................................................................................................................................................
Align the mounting points on the reverse side of the 9768 CMRO with the mounting lugs
on the bracket. Attach the 9768 CMRO to the bracket by sliding the 9768 CMRO
forwards and downwards onto the bracket mounting lugs.
FCC FILING
Installation
Install the 9768 CMRO on a pole or a wall
...................................................................................................................................................................................................
Secure the 9768 CMRO onto the mounting frame by tightening the lever retaining screw.
...................................................................................................................................................................................................
10
Finally, check the 9768 CMRO is correctly locked into position and there is no movement
of the module on the mounting frame.
...................................................................................................................................................................................................
11
Route the ground cable from the ground system to the 9768 CMRO and Connect the
ground lug to the grounding point on the 9768 CMRO using the supplied M6 screws, lock
washers, and flat washers. Use antioxidant at the grounding pads.
...................................................................................................................................................................................................
12
Connect the external RF antennas to the mini-DIN 4.3-10 RF antenna connectors on the
bottom of the 9768 CMRO. Refer to the RF antenna mounting instructions included with
the RF antenna kit for the steps to mount the antennas.
...................................................................................................................................................................................................
13
If required, assemble the AC or DC power connector with the power cable. If the power
connector is already assembled with the power cable, skip this step.
...................................................................................................................................................................................................
14
Plug the power connector on the power cord into the power connector on the bottom of
the 9768 CMRO unit.
...................................................................................................................................................................................................
15
Verify that mounted equipment is secure and that no unintentional mechanical alteration
has occurred to either the equipment itself or the installation infrastructure.
16
Ensure that all the exterior connections are secure.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
3-13
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
...................................................................................................................................................................................................
FCC FILING
Installation
Install the 9768 CMRO on a pole or a wall
Procedure 3-2: Wall-mount the 9768 CMRO
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
17
Finally, inspect the site for loose tools, materials, and parts. Remove all such loose tools,
materials, and parts.
E...................................................................................................................................................................................................
N D O F S T E P S
Standard wall mount example
FCC FILING
The following figure depicts a standard 9768 CMRO wall-mount installation.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
3-14
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
FCC FILING
Appendix A: LED State
Description
Overview
Purpose
This appendix describes the LED status and descriptions for the Alcatel-Lucent 9768
Compact Metro Radio Outdoor (9768 CMRO).
Contents
LED Status for 9768 CMRO
A-2
FCC FILING
...................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
A-1
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
LED State Description
LED Status for 9768 CMRO
....................................................................................................................................................................................................................................
LED Status for 9768 CMRO
Overview
This topic describes the LED status and descriptions for the 9768 CMRO.
Figure A-1 LED indicator
LED indicator
9768 CMRO
(rear view)
LED interpretation table
On the back lower portion of the Alcatel-Lucent 9768 Compact Metro Radio Outdoor, a
single visible LED provides local diagnostic indications. Note: LEDs can be used for
debugging purposes during installation and commissioning. They are not intended for use
during normal operation of the equipment.
FCC FILING
Table A-1
LED interpretations
LED
Status
LED description
Off
No power supplied
No AC, no DC power (dead unit).
Red
Initial power On
The unit is initializing.
Flash red
External power supply failure
AC or DC input power feed is out of range.
Flash yellow
Software download
The unit is downloading software and RF
transmission is off, but is currently
operational.
Solid red
Non-recoverable critical failure
A critical hardware failure prevents either the
transmit path or the active receive paths (or all
paths) from functioning.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
A-2
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
LED Status for 9768 CMRO
....................................................................................................................................................................................................................................
Table A-1
LED interpretations
(continued)
LED
Status
LED description
Flash red
Recoverable critical failure
The unit is not currently operational due to
hardware fault, but should recover (for
example, Under-Temperature Warm-Up or
Over- Temperature Critical Shut-down).
Solid yellow
Slave CPRI link failure
The slave CPRI link has failed.
Solid red
Non-critical non-recoverable failure
Non-critical fault (other than antenna)
detected, fault is not recoverable, transmission
is still on.
Flash red
Non-critical recoverable failure
Non-critical fault (other than antenna)
detected, fault is recoverable, transmission is
still on.
Solid green
Normal operation
No critical failures or faults, transmission is
enabled.
Flash green
Stand-by
No critical failures or faults, the transmitter is
disabled.
FCC FILING
LED State Description
Statuses for which no LED illuminates
no LED
External Antenna failure
An equipped antenna has a VSWR fault.
no LED
Background software download
A background software download is in
progress, RF is currently enabled.
FCC FILING
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
A-3
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
FCC FILING
LED State Description
LED Status for 9768 CMRO
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
A-4
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
FCC FILING
Appendix B: Product
conformance statements
Overview
Purpose
This section presents the product conformance statements that apply to the Alcatel-Lucent
9768 Metro Radio Outdoor product.
The statements that are required are determined primarily by national or multi-national
regulations. However, in some regions, contract terms determine which statements are
required.
The presence of the statement indicates that the product does comply with that statement
wherever it is required to do so.
Contents
United States compliance
B-2
Federal Communications Commission
B-3
Product safety conformance statements
B-5
Antenna exposure statements
B-6
FDA/IEC optical transmitter product compliance statements
B-7
Eco-environmental statements
B-8
Canadian compliance
B-9
B-10
Product safety and exposure
B-11
Antenna exposure statements
B-12
IEC optical transmitter product compliance statements
B-13
Eco-environmental statements
B-14
...................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
B-1
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Industry Canada
FCC FILING
Product conformance statements
United States compliance
Introduction
....................................................................................................................................................................................................................................
United States compliance
Introduction
Purpose
The statements that follow are the product conformance statements that apply to the
Alcatel-Lucent 9768 Metro Radio Outdoor Product when deployed in the United States.
FCC FILING
Contents
Federal Communications Commission
B-3
Product safety conformance statements
B-5
Antenna exposure statements
B-6
FDA/IEC optical transmitter product compliance statements
B-7
Eco-environmental statements
B-8
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
B-2
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
Federal Communications Commission
....................................................................................................................................................................................................................................
Federal Communications Commission
Federal Communications Commission
Important! Changes or modifications not expressly approved by Alcatel-Lucent, Inc.
could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
FCC FILING
Product conformance statements
United States compliance
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
FCC Part 15 Class B
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
Consult the dealer or an experienced radio/TV technician for help.
FCC Part 68
FIC
04DU9-1SN.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
B-3
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
This equipment complies with Part 68 of the FCC rules and the requirements adopted by
the ACTA. At the upper-right-hand corner inside the cabinet assembly of this equipment
is a label that contains, among other information, a product identifier in the format of
AAAEQ##TXXXX. If requested, this number must be provided to the telephone
company.
FCC FILING
Product conformance statements
United States compliance
Federal Communications Commission
....................................................................................................................................................................................................................................
SOC
6.0N
The T1 network interface on this equipment is hardwired to a punchdown block, which
meets the FCC specifications.
If this equipment causes harm to the telephone network, the telephone company will
notify you in advance that temporary discontinuance of service may be required.
However, if advance notice is not practical, the telephone company will notify the
customer as soon as possible. Also, you will be advised of your right to file a complaint
with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations, or
procedures that could affect the operation of the equipment. If this happens, the telephone
company will provide advance notice in order for you to make necessary modifications to
maintain uninterrupted service.
FCC regulations prohibit the connection of customer-provided equipment to central office
implemented systems. Connection to party lines is subject to tariffs; users should contact
their state public utility commission, public service commission, or corporation
commission for information.
If the equipment is causing harm to the telephone network, the telephone company may
request that you disconnect the equipment until the problem is resolved.
If trouble is experienced with this equipment repair or warranty information may be
obtained by contacting:
FCC FILING
Technical Support Services, within the United States: +1 630 224 4762, prompt 2
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
B-4
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
Product safety conformance statements
....................................................................................................................................................................................................................................
Product safety conformance statements
Product safety conformance
The Alcatel-Lucent 9768 Metro Radio Outdoor is Safety Certified ITE by CSA
International.
This Certification is marked on the equipment main nameplate label. Should the local
Authority Having Jurisdiction (AHJ) require prior or additional verification of this
Certification, a Product Certificate of Compliance can be obtained from the specific
Certification Body by the Business/Product Unit Applicant for the product or by
contacting:
FCC FILING
Product conformance statements
United States compliance
Technical Support Services, within the United States: +1 630 224 4762, prompt 2
Any modifications to this equipment are not permitted without review and official written
authorization from the specific Certification Body. Unauthorized changes may violate the
Product Safety Certification. Modifications or changes authorized by official CN/CNN
are assumed to have received prior approval from this Lab.
Indoor applications
This equipment is intended for installation in restricted access locations where access is
controlled or where access can only be gained by service personnel with a key or tool.
Access to this equipment is restricted to qualified service personnel only.
FCC FILING
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
B-5
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Product conformance statements
United States compliance
Antenna exposure statements
....................................................................................................................................................................................................................................
Antenna exposure statements
Antenna exposure
Antenna installations for the Alcatel-Lucent 9768 Metro Radio Outdoor product will be
performed in accordance with all applicable manufacturer's recommendations, and
national laws and regulations. To ensure correct antenna installation, the antenna installer
will perform all necessary calculations and/or field measurements to evaluate compliance
with applicable national laws or regulations regarding exposure to electromagnetic fields.
The supplier of radio equipment, the supplier of antenna equipment and the integrator and
builder of the site must provide sufficient information so that the limits of the exclusion
zones can be determined. Any changes to the antenna or other equipment in the transmit
path may require re-evaluation of the exposures to electromagnetic fields.
FCC FILING
Pursuant to 47 CFR Part 1, Subpart I, subject to the provisions of section 1.1307, all
installations must be evaluated for requirements contained in Table 1, “Limits for
maximum permissible exposure,” in section 1.1310.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
B-6
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
FDA/IEC optical transmitter product compliance statements
....................................................................................................................................................................................................................................
FDA/IEC optical transmitter product compliance statements
FDA/IEC optical transmitter product compliance
Alcatel-Lucent declares that this equipment complies with the Food and Drug
Administration’s Center for Devices and Radiological Health (FDA/CDRH) regulations
21 CFR 1040.10 and 1040.11. It is a Class I/1 laser optical fiber communication systems
“product” under the FDA.
FCC FILING
Product conformance statements
United States compliance
This Product is designed to ensure that personnel operating the product are not
endangered by laser radiation during normal operation and fault conditions. This product
does not present a risk of eye injury because it is fully enclosed and does not contain
embedded lasers greater than Class I/1 unless otherwise noted.
Laser warning
WARNING
Laser hazard
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous laser radiation exposure.
Do not view directly into the laser beam with optical instruments such as a fiber
microscope because viewing of laser emission in excess of Class 1 limits significantly
increases the risk of eye damage.
Never look into the end of an exposed fiber or an open connector as long as the optical
source is switched on.
Ensure that the optical source is switched off before disconnecting optical fiber
connectors.
FCC FILING
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
B-7
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Product conformance statements
United States compliance
Eco-environmental statements
....................................................................................................................................................................................................................................
Eco-environmental statements
Packaging collection and recovery requirements
Countries, states, localities, or other jurisdictions may require that systems be established
for the return and/or collection of packaging waste from the consumer, or other end user,
or from the waste stream. Additionally, reuse, recovery, and/or recycling targets for the
return and/or collection of the packaging waste may be established.
For more information regarding collection and recovery of packaging and packaging
waste within specific jurisdictions, contact the Alcatel-Lucent Environment, Health and
Safety organization or Alcatel-Lucent Hazardous Waste Center technical support at (888)
539-2783.
For installations not performed by Alcatel-Lucent, please contact the Alcatel-Lucent
Customer Support Center at:
Technical Support Services, within the United States: +1 630 224 4762, prompt 2
Material content compliance
The following notification applies to Alcatel-Lucent products distributed for sale, resale,
or use.
This product, part, or both may include a lithium-manganese dioxide battery, which
contains very small amounts of a perchlorate substance. Special handling may apply.
For California:
Perchlorate Material - special handling may apply.
FCC FILING
See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
B-8
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
Introduction
....................................................................................................................................................................................................................................
Canadian compliance
Introduction
Purpose
The statements that follow are the product conformance statement that apply to the
Alcatel-Lucent 9768 Compact Metro Radio Outdoor when deployed in Canada.
FCC FILING
Product conformance statements
Canadian compliance
Contents
Industry Canada
B-10
Product safety and exposure
B-11
Antenna exposure statements
B-12
IEC optical transmitter product compliance statements
B-13
Eco-environmental statements
B-14
FCC FILING
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
B-9
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
FCC FILING
Product conformance statements
Canadian compliance
Industry Canada
....................................................................................................................................................................................................................................
Industry Canada
EMC approval
ICES-003: Interference-Causing Equipment Standard Digital Apparatus
The Alcatel-Lucent Metro Radio product complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
B-10
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
Product safety and exposure
....................................................................................................................................................................................................................................
Product safety and exposure
Product safety conformance
This equipment is safety certified to C22.2 No. 60950-1 for Canada by a laboratory
accredited by the Standards Council of Canada (SCC), such as CSA, UL, or others. The
product bears this certification mark of this certification laboratory on its main nameplate
label. Should the local authority having jurisdiction (AHJ) require prior or additional
verification of this certification, a product certificate of compliance can be obtained from
the specific certification laboratory by the business/product unit Applicant for the product.
Any modifications to this equipment are not permitted without review and written official
authorization from the specific certification laboratory. Unauthorized changes may violate
the product safety certification. Modifications or changes authorized by official CN/CNN
are assumed to have received prior approval from this Lab.
FCC FILING
Product conformance statements
Canadian compliance
Human exposure
Pursuant to Health Canada Safety Code 6, Limits of Human Exposure to Radio frequency
Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, all installations
must be evaluated against the Maximum Exposure Limits as described in Health Canada
99-EHD-237.
FCC FILING
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
B-11
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Product conformance statements
Canadian compliance
Antenna exposure statements
....................................................................................................................................................................................................................................
Antenna exposure statements
Antenna exposure
Antenna installations for this equipment shall be performed in accordance with all
applicable manufacturer's recommendations, and national laws and regulations. To ensure
correct antenna installation, the antenna installer shall perform all necessary calculations
and/or field measurements to evaluate compliance with applicable national laws or
regulations regarding exposure to electromagnetic fields.
The supplier of radio equipment, the supplier of antenna equipment and the integrator and
builder of the site must provide sufficient information so that the limits of the exclusion
zones can be determined. Any changes to the antenna or other equipment in the transmit
path may require re-evaluation of the exposures to electromagnetic fields.
The antenna(s) used for this transmitter must be installed to provide a separation distance
of at least 1.8 m from all persons.
FCC FILING
Les antennes utilisées pour cet émetteur doivent être installées de façon à respecter une
distance de sécurité d'au moins 1.8 m.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
B-12
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
IEC optical transmitter product compliance statements
....................................................................................................................................................................................................................................
IEC optical transmitter product compliance statements
IEC optical transmitter product compliance
Alcatel-Lucent declares that this equipment complies with the International
Electrotechnical Commission (IEC) standards IEC 60825-1 Edition 2.0 (2007) and IEC
60825-2 Edition 3.1 (2007). It is a Class I/1 laser optical fiber communication systems
“product” under the IEC classifications.
FCC FILING
Product conformance statements
Canadian compliance
This product is designed to ensure that personnel operating the product are not
endangered by laser radiation during normal operation and fault conditions. This product
does not present a risk of eye injury because it is fully enclosed and does not contain
embedded lasers greater than Class I/1 unless otherwise noted.
Laser warning
WARNING
Laser hazard
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous laser radiation exposure.
Do not view directly into the laser beam with optical instruments such as a fiber
microscope because viewing of laser emission in excess of Class 1 limits significantly
increases the risk of eye damage.
Never look into the end of an exposed fiber or an open connector as long as the optical
source is switched on.
Ensure that the optical source is switched off before disconnecting optical fiber
connectors.
FCC FILING
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
B-13
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Product conformance statements
Canadian compliance
Eco-environmental statements
....................................................................................................................................................................................................................................
Eco-environmental statements
Packaging collection and recovery requirements
Countries, states, localities, or other jurisdictions may require that systems be established
for the return and/or collection of packaging waste from the consumer, or other end user,
or from the waste stream. Additionally, reuse, recovery, and/or recycling targets for the
return and/or collection of the packaging waste may be established.
For more information regarding collection and recovery of packaging and packaging
waste within specific jurisdictions, contact the Alcatel-Lucent Environment, Health and
Safety organization or Alcatel-Lucent Hazardous Waste Center technical support at (888)
539-2783.
For installations not performed by Alcatel-Lucent, please contact the Alcatel-Lucent
Customer Support Center at:
FCC FILING
Technical Support Services, within Canada: +1 630 224 4672, prompt 2
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
B-14
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
This glossary provides a quick reference to the terms, acronyms, and abbreviations commonly
used in the Alcatel-Lucent Metro product documentation.
...................................................................................................................................................................................................................................
Numerics
FCC FILING
Glossary
3G
Third Generation
3GPP
3rd Generation Partnership Project
A collaboration between groups of telecommunications associations for the promotion and
standardization of high-speed cellular services.
5620 SAM
5620 Service Aware Manager
9952 WPS
9952 Wireless Provisioning System
...................................................................................................................................................................................................................................
A (Ampere)
Base SI unit of electrical current.
SI is the International System of Units (abbreviated SI from French: Le Système international
d'units).
A-GPS
Assisted Global Positioning System
AAA
Authentication, Authorization, and Accounting
AC
AC (Alternating Current)
Continuously variable current, rising to a maximum in one direction, falling to zero, then
reversing direction and repeating the cycle in the other direction.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
GL-1
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Access Class
FCC FILING
Glossary
....................................................................................................................................................................................................................................
AC convenience outlet
Sites must be equipped with at least two duplex outlets for installation and maintenance
procedures. The outlets are required to power test equipment and installation tools.
ACF (AC Fail)
The AC Fail (ACF) alarm indicates that AC input to one or more rectifiers in the power plant is
absent or outside of the operating range of the equipment
ACLR
Adjacent Channel Leakage power Ratio
AHJ
The agency or authority having jurisdiction. Article 100 of the National Electrical Code (NEC) for
the United States defines AHJ with greater specificity, stating that it may be a federal, state, local
government, or individual such as a fire chief, fire marshal, chief of a fire prevention bureau,
labor department or health department, building official or electrical inspector, or others having
statutory authority. In some circumstances, the property owner or his/her agent assumes the roles,
and at government installations, the commanding officer or departmental official may be the AHJ.
Ambient temperature
The temperature of air or other media in a designated area, particularly the area
ANR
Automatic Neighbor Relation
ANSI (American National Standards Institute)
An organization chartered to accredit standards developed by a wide variety of industry groups,
without influence from any one company or organization. Does not develop standards, but
reviews and implements standards developed by other organizations. ANSI is a member of the
International Standards Organization (ISO).
Antenna
An elevated device for radiating or receiving radio waves. It changes electrical currents into
electromagnetic waves, and conversely, electromagnetic waves into electrical currents.
AP
Access Point
FCC FILING
AP (Application Processor)
Network element located at the MSC which provides the radio control logic for managing calls.
The AP is a general-purpose computer that can host a number of RCS virtual machines.
AWG (American Wire Gauge)
American standard for classifying wire diameter.
...................................................................................................................................................................................................................................
backhaul
The portion of the network connecting the base band unit (BBU) to the mobile core network.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
GL-2
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
....................................................................................................................................................................................................................................
Backup
Facility used to replace an element which has failed.
Base station
The equipment that provides the air interface that allows mobile terminals to communicate with
the telecommunications network.
BBU
BaseBand Unit
FCC FILING
Glossary
BD (Battery on Discharge, first stage)
The Batteries on Discharge (BD) alarm indicates the power system output voltage has decreased
below the “batteries on discharge” threshold set point. The “batteries on discharge” threshold is
set for 50.0 V (for -48-VDC systems) or 25.0 V (for +24-VDC systems).
BD-2 (Battery on Discharge-2)
The Batteries on Discharge (BD-2) alarm indicates the power system output voltage has decreased
below the “batteries on a second discharge” threshold set point. The “batteries on a second
discharge” threshold is set for 44.0 V (for -48-VDC systems) or 22.0 V (for +24-VDC systems).
BOCA
Building Officials and Code Administrators
Bonding
Permanent connection of metallic parts to form an electrically conductive path that assures
electrical continuity and has the capability to safely conduct any current likely to be imposed.
Branch circuit
The circuit conductors between the final overcurrent device protecting the circuit and the outlet.
Breaker, circuit
A cut-out device which breaks a circuit when preset limits of current are exceeded.
Buried cable
A communication cable manufactured or produced for the purpose of burial in direct contact with
the earth.
Buried ring ground
A buried, bare, tinned, solid copper cable encircling the site building and/or tower foundation.
One or more conductors that serves as a common connection for a group of related devices.
Busy hour
The uninterrupted period of 60-min for which the average intensity of traffic is at maximum.
BW
Bandwidth
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
GL-3
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Bus bar
FCC FILING
Glossary
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................................................
Cable run
Referring to cable routing.
Cable sweep
(See Sweep)
CAN/CSA
Canadian Standards Association. See http://www.csa.ca (http://www.csa.ca).
CDRH
Center for Devices and Radiological Health
CE
Conformité Européene
A CE Marking on a product is a declaration from the manufacturer that the product complies with
the essential requirements of the relevant European health, safety, and environmental protection
legislation.
Cell site
An installation located within a cell that houses the equipment needed to set up and complete calls
on a cellular telephone.
CFR
Code of Federal Regulations.
Among these regulations, Title 47, “Telecommunication,” conveys the rules of the FCC
companies operating networks in the USA. See also FCC.
CIC (Customer Information Center)
Source for locating and obtaining delivery of Alcatel-Lucent customer documents.
Circuit
FCC FILING
1. The complete path between two terminals over which one-way or two-way communications
may be provided. 2. An electronic path between two or more points, capable of providing a
number of channels. 3. A number of conductors connected together for the purpose of carrying an
electrical current. 4. An electronic closed-loop path among two or more points used for signal
transfer. 5. A number of electrical components, such as resistors, inductances, capacitors,
transistors, and power sources connected together in one or more closed loops.
CISPR
The [special] international committee on radio interference. Its publication CISPR 22, Information
Technology Equipment—Radio Disturbance Characteristics—Limits and Methods of
Measurement addresses any device that emits RF outside the scope of its intended purpose.
CLI
Command Line Interface
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
GL-4
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
....................................................................................................................................................................................................................................
CMAS
Commercial Mobile Alert System
CMS
Certificate Management System
CN/CNN
Arcane term for changes notices that affect Alcatel-Lucent products.
Coaxial cable
FCC FILING
Glossary
A cable with one or more coaxial pairs under one outer sheath. The cable consists of a center
conductor surrounded by an insulating material and a concentric outer conductor.
Configuration
An arrangement of functional units according to their nature, number, and chief characteristics.
Controlled environment
An indoor location in which temperature, humidity, and ventilation are maintained at specific
levels.
Core
A subset of generic requirements published by Telcordia Technologies. See also GR. The Core
requirements that affect the Metro product (Radio/Cell) concern spurious emissions, surges from
lightning, and resistance to wind, wind-driven rain, salt fog, and extreme ambient temperature.
CPC
Circular Plastic Connector
CPRI
Common Public Radio Interface
CS
Circuit Switched
CSA
Convergent Security Asset
CSA (Canadian Standards Association)
An independent, non-government, not-for-profit association for the development, by consensus,
of Canadian standards and product certifications.
Sheets provided in this document for documenting cell site configuration, conditions, and other
pertinent information for reference during product deployment, and future additions.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
GL-5
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
CSC (Cell Site Configuration)
FCC FILING
Glossary
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................................................
d2U
digital 2U-height box.
The BBU system supporting two controller and two modems. See also BBU.
dB (decibel)
A unit which expresses the ratio of two voltages, currents, or powers. Decibel (dB) is used to
specify transmission loss, gain, or relative level. Decibel (dB) equal to 20 times the common
logarithm of the ratio of two voltages or two currents, or 10 times the common logarithm of the
ratio of two powers.
dBi (decibels (dB) relative to isotropic)
Decibels relative to an isotropic antenna gain at radio frequencies.
Antenna gain is defined as the ratio of the power produced by the antenna from a far-field source
on the antenna's beam axis to the power produced by a hypothetical lossless isotropic antenna,
which is equally sensitive to signals from all directions. Usually this ratio is expressed in decibels,
and these units are referred to as "decibels-isotropic" (dBi).
DC (Direct Current)
Current flow in one direction.
DFS
Dynamic Frequency Selection
DHCP
Dynamic Host Configuration Protocol
Diversity
A method of radio transmission and/or reception, which counteracts the effects of fading by
combining several signals all bearing the same information.
DL
Downlink
DNS
Domain Name System
DoS
FCC FILING
Denial of Service
Down conductor
A vertical conductor of low impedance that connects the cell site grounding electrode system to
the grounding electrode system.
Driven ground rod
A copper-clad steel or stainless steel rod, a minimum of 2.4 m (8 f) long and 5/8-in diameter.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
GL-6
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
....................................................................................................................................................................................................................................
DRX
Discontinuous Reception
DSCP
Differentiated Services Code Point
...................................................................................................................................................................................................................................
E1
A four-wire voice and data trunking facility that carries 30 duplex channels in 64-kbps time slices.
E1 facilities are commonly used in countries outside of North America.
FCC FILING
Glossary
Earthquake zone
Seismic ratings ranging from zone 1 (relatively low central office operational shock and vibration
levels) to the most severe zone 4 levels. Equipment must be able to withstand earthquake zone
requirements under both operational and non-operational conditions.
ECID
Enhanced Cell ID
EEC directive
A law enacted by the European Union for enforcement by its Common Market. The terms of such
a law have been used as a point of reference against which to compare the intentional RF
emissions of the MRO.
EIRP
Effective Isotropic Radiated Power
Electrolytic ground electrode (rods)
A low resistance grounding rod (pipe) using low resistivity materials.
EMS
Element Management System
ESD
Electrostatic discharge.
A hazard that electronic equipment such as the Metro Cell or Metro Radio can suffer by way of
exposure to static electricity or proximity to something that has no connection to ground.
ETSI
European Telecommunications Standards Institute
European Union
Exothermic weld
A method of making electrical connections of copper to copper or copper to steel using high
temperature fusion. The molten copper flows over conductors in a mold, melting, and welding
them together.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
GL-7
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
EU
FCC FILING
Glossary
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................................................
FA (Fuse Alarm)
The fuse alarm (FA) indicates that the power system battery and load protection fuse opens.
Facility
Any element of physical telephone equipment needed to provide service, such as cables,
switching systems, and microwave radio transmission systems.
FCC (Federal Communications Commission)
A group founded in 1934 to regulate all types of communications in the United States.
FDA
Food and Drug Administration
FDD
Frequency Division Duplex
Float
To operate a power load on a main-driven rectifier in parallel with a low impedance storage
battery, which is kept fully charged by the rectifier and is itself only called upon to provide power
during temporary and short-duration peaks for which the rectifier output is insufficient.
FM
Fault Management
FQDN
Fully Qualified Domain Name
Frequency
For a periodic wave, such as alternating current, the number of complete cycles per unit of time.
The unit of frequency is cycles per second, or hertz.
fronthaul
The common public radio interface (CPRI) connection between a standalone remote radio head
(for example: 9768 MRO, 9768 CMRO) and the base band unit (BBU).
FRU
Field Replaceable Unit
FCC FILING
Full AXS
Cable connector used for CPRI connection to the Metro product (Radio/Cell).
Fuse
An overcurrent protective device that has as its critical component a metal wire or strip that melts
when heated by a prescribed (design) amperage, creating an open in the circuit of which it is a
part, protecting the circuit from an overcurrent condition.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
GL-8
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................................................
GA
General Availability
Gain
The ratio of output current, voltage, or power to input current, voltage, or power, respectively.
Gain is measured in dB. If the ratio is less than unity, the gain, expressed in dB, will be negative,
in which case there is a loss between input and output.
FCC FILING
Glossary
Garmin 45XLS
A handheld GPS receiver that can be used to verify GPS reception at a cell site. It has a removable
antenna and provides +5 VDC on the center pin of the RF connection to power external active
antennas. If poor GPS reception is suspected, the Garmin 45XLS can be used to verify that the
GPS antenna and cable system is working acceptably. It also verifies whether the GPS antenna
location is acceptable.
GE (Gig-E, GBE)
Gigabit Ethernet
GFCI (Ground Fault Circuit Interrupter)
A device intended for protection of personnel that functions to de-energize a circuit or portion
thereof within an established period when a current to ground exceeds some predetermined value
that is less than that required to operate the overcurrent protective device of the supply circuit.
GHz
GigaHertz
GLONASS
GLONASS is an acronym, which stands for Globalnaya Navigazionnaya Sputnikovaya Sistema,
or Global Navigation Satellite System. GLONASS is a satellite navigation system operated by the
Russia.
GNSS
Global Navigation Satellite System
GPON
Gigabit Passive Optical Network
GPRS
GPS (Global Positioning System)
A system of 24 satellites that provides, among other things, accurate timing information to the cell
sites.
GR
Generic requirements published by Telcordia Technologies. See also Core.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
GL-9
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
General Packet Radio Services
FCC FILING
Glossary
....................................................................................................................................................................................................................................
Ground
A conducting connection between equipment or an electrical circuit and earth, or conductive body
that is used in place of earth
Grounding conductor
A conductor used to connect equipment or a grounded electrical circuit to the grounding electrode
system.
Grounding electrode system
The conductive objects that are intentionally bonded to furnish connection to earth (that is, buried
ring ground with ground rods, electrically continuous buried metallic water pipe, electrolytic
ground electrode, and so on).
GTP
GPRS Tunneling Protocol
GUI
Graphical User Interface
Guy
Steel wire or rope used to hold a pole upright.
...................................................................................................................................................................................................................................
Handoff
An automatic transfer of a cellular telephone call from one cell to another, maintaining call quality
as the mobile user moves through the coverage area.
HDM
Home Device Manager
Heat dissipation
The heat generated by cabinets during operation.
HPBW
Half Power Beamwidth
HSDPA
High-Speed Downlink Packet Access
FCC FILING
HSPA
High-Speed Packet Access
HSUPA
High-Speed Uplink Packet Access
HTTP
Hypertext Transfer Protocol
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
GL-10
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
....................................................................................................................................................................................................................................
HV
High Voltage
HVAC (Heating, Ventilation, Air Conditioning)
Hz (hertz)
A unit of frequency of a periodic process equal to one cycle per second.
...................................................................................................................................................................................................................................
FCC FILING
Glossary
I 2C
Inter-integrated Circuit
ICNIRP
International Commission for Non-Ionizing Radiation Protection
IEC
International Electrotechnical Commission. The Metro products comply with numerous standards
that this independent body has propagated.
IEEE
Institute of Electrical and Electronics Engineers
Indoor site
Installation site in a controlled environment, allowing the use of indoor cabinets.
INTR (Intrusion Alarm)
The Intrusion (INTR) alarm indicates a door or access panel to the power system is open.
IP
Internet Protocol
IPsec
Internet Protocol Security
IPx5
The subset of the standard IEC 60529 to which the Metro product (Radio/Cell) conforms in its
resistance to intrusion by water. Conformance to this subset means that the Metro product
(Radio/Cell) withstands a 3-min test of 12.5 L/min at 30 kN/m2 from 3 meters away.
IRC
ISM
Industrial, Scientific, and Medical
IT
In an IT earthing system, the electrical distribution system has no connection to earth at all, or it
has only a high impedance connection. In such systems, an insulation monitoring device is used to
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
GL-11
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Interference Rejection Combining
FCC FILING
Glossary
....................................................................................................................................................................................................................................
monitor the impedance.
...................................................................................................................................................................................................................................
LAN
Local Area Network
LC
A small connector that terminates a fiber optic cable and snaps into its mate.
LED
light emitting diode
LMT
Local Maintenance Terminal
Load
The power consumed by a device or circuit in performing its function.
Loss
The diminution measured in dB, of signal level in a communications medium. The power
measured in watts, consumed by a circuit or component. The energy dissipated without
accomplishing useful work or purpose.
lR / LR (lightRadio ™ )
The Alcatel-Lucent lightRadio ™ family of wireless products.
LTE
Long Term Evolution
LV
Low Voltage
...................................................................................................................................................................................................................................
MAC (address)
Media Access Control Address
A MAC address is a hardware identification number that uniquely identifies each device on a
network.
FCC FILING
MAC (protocol)
Medium Access Control Protocol
The media access control (MAC) data communication protocol is a sublayer of the data link layer.
MAC protocol provides addressing and channel access control mechanisms that make it possible
for multiple terminals or network nodes to communicate within a multiple access network that
incorporates a shared medium, for example, Ethernet.
MCI
Metro Cell Indoor
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
GL-12
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
....................................................................................................................................................................................................................................
MCO
Metro Cell Outdoor
MFBI
Multiple Frequency Band Indicators
MGB (Main Ground Bus)
A copper bus bar used to provide the electrical interfaces for connection of the isolated ground
plane to the integrated ground system.
FCC FILING
Glossary
MHz (Megahertz)
Reference of radio frequency spectrum of one-million cycles.
MIMO
multiple input, multiple output
An antenna technology for wireless communications in which multiple antennas are used at both
the source (transmitter) and the destination (receiver).
MME
Mobility Management Entity
MOP (Method of Procedure)
Cell site walk-through where site preparation activities are verified prior to installing the 9412
eNodeB Compact equipment.
MRO
Metro Radio Outdoor
MSC (Mobile Switching Center)
In an automatic cellular mobile system, the interface between the radio system and the public
switched telephone network. The MSC performs all signaling functions that are necessary to
establish calls to and from mobile stations.
MSP
Mobile Service Provider
MSP
mobile service provider
MTBF
mW
milliWatt
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
GL-13
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Mean Time Between Failure
FCC FILING
Glossary
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................................................
NAR
North American Region
NEC (National Electric Code)
Standard that governs the use of electric wire, cable, and fixtures, and electrical and optical
communication cable installed in buildings.
NEM
Network Element Manager
NEMA
National Electrical Manufacturers Association. The Metro product (Radio/Cell) qualifies as a
NEMA 250-2008 standard Type 4 enclosure with respect to intrusion of dust and wind-driven
rain.
Network
A set of terminals, the communications link that joins them, and the protocols that allow them to
function together and communicate with each other.
NFPA (National Fire Protection Association)
Standards and code writing organization made up of volunteer industrial and institutional
subject-matter-expert committees.
NG-SEC
Next Generation Security
NIU (Network Interface Unit)
A device that performs interface functions, such as code conversion, protocol conversion, and
buffering, required for communications to and from a network. The device is used primarily
within a local area network to allow a number of independent devices, with varying protocols, to
communicate with each other. An NIU converts each device protocol into a common transmission
protocol. The transmission protocol can be chosen to accommodate directly a number of the
devices used within the network without the need for protocol conversion for those devices by the
NIU.
Nominal
FCC FILING
Specified value or intended value independent to any uncertainty in its realization. In a device that
realizes a physical quantity, it is the value of such a quantity specified by the manufacturer.
Non-Alcatel-Lucent power
3rd- party power systems, or power systems other than Alcatel-Lucent.
NSP
Network Services Platform
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
GL-14
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................................................
OAM (OA&M)
Operations, Administration, and Maintenance
OFDM
Orthogonal frequency-division multiplexing, the multi-carrier modulation scheme that overcomes
many commonly experienced wireless communications problems, such as multipath and signal
attenuation.
FCC FILING
Glossary
OLCS
Online Customer Support
OOT
Out Of Time alignment
OPS
On-Path Support
OSP
Outside Plant
OSS
Operation Support System
OTDOA
Observed Time Difference Of Arrival
...................................................................................................................................................................................................................................
P-GW
Packet Data Network Gateway
Pair cable
Cable made up of one or more separately insulated wire pairs, none of which is arranged with
another quads.
PCI
Physical Cell ID
PD
PDCP
Packet Data Convergence Protocol, which provides security to both the air interface and the fiber
optic interface of the MRO by compressing and decompressing the IP headers, as specified in the
UMTS protocol stack.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
GL-15
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Powered Device
FCC FILING
Glossary
....................................................................................................................................................................................................................................
PDU
Power Distribution Unit
Phase
The number of separate voltage waves in commercial alternating current, designated as "single
phase", "three-phase", and so on.
Pigtail
A short length of electrical conductor permanently affixed to a component, used to connect the
component to another.
PM
Performance Management
PMJ
Conditions that affect service of the power system and/or require immediate attention are
classified as major alarms and designated as Power Major (PMJ) alarms.
PMN
Conditions requiring service, but having no immediate affect on the power system output are
classified as minor alarms and designated as Power Minor (PMN) alarms.
PnP
Plug and Play
PoE
Power over Ethernet
PVC (Polyvinyl Chloride)
A thermoplastic made of polymers, which is tough, nonflammable, and water resistant and is used
as an insulation.
...................................................................................................................................................................................................................................
QAM
Quadrature Amplitude Modulation
QoE
Quality Of Experience
FCC FILING
QoS
quality of service
...................................................................................................................................................................................................................................
Radiall
The proprietary name of an enterprise that produces components for device interconnections.
These components include the R2CT weatherized connector kit by which the Metro Radio
installer retrofits the LC fiber optic connector on the fronthaul cable to the SFP port module of the
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
GL-16
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
....................................................................................................................................................................................................................................
Metro Radio. The proper name of this company is Radiall USA, Inc. See also SFP.
RAN
Radio Access Network
RDC
Residual Current Device
Receive-only
Pertaining to a device or a mode of operation capable of receiving messages, but not transmitting
messages.
FCC FILING
Glossary
RF
Radio Frequency
RFOA
Ready for First Office Application
RMS (Root Mean Square)
Effective value of an alternative wave. For AC, RMS is numerically equal to DC value of the
current with the same heating affect.
RoHS
Restriction of Hazardous Substances regulation
RoW
Rest of World
RRH
Remote RF head consisting of a radio, a receive filter, a transmit amplifier, and a CPRI link to a
BBU. The MRO is an RRH. See also BBU and CPRI.
Rx / RX
Receive
...................................................................................................................................................................................................................................
S-GW
Serving Gateway
SAR (Specific Absorption Rate)
SCMS
Small Cell Management System
Sector
The coverage area within the degree of directionality of the antennas.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
GL-17
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
A measure of the rate at which energy is absorbed by the body when exposed to radio frequency
energy.
FCC FILING
Glossary
....................................................................................................................................................................................................................................
SeGW
Security Gateway
Service provider
Customer who purchases switching and Site equipment from system vendors, which, in turn, is
provided to end-user subscribers through resellers and distribution channels.
SFP (Small Form-Factor Pluggable)
A compact, hot-pluggable transceiver that interfaces a network device motherboard to a
fiber-optic or copper networking cable to support telecommunication and data communications.
SGMII
Serial Gigabit Media Independent Interface
Shield
A housing, screen, sheath, or cover that substantially reduces the coupling of electric, magnetic, or
electromagnetic fields into or out of circuits or transmission lines.
Short-term
No more than 96 consecutive hours or 15 days per year.
SIMO
Single input, multiple output. Its transmitter function uses a one antenna, and its receiver function
uses two. This scheme reduces the instance of multipath and fading, in particular. Antonyms are
MISO (multiple input, single output) and MIMO (multiple input, multiple output).
Single-phase
A circuit in which there is only one sinusoidal voltage variation.
Site
An installation that houses the equipment needed to set up and complete calls on a cellular
telephone.
Site preparation
To perform the requirements necessary at the site before installation can begin.
SLA
Service Level Agreement
FCC FILING
SMG
System Management Solution
SON
Self-Organizing Network
Specific site
The spot where the Metro product is installed in the venue. See also Venue.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
GL-18
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
....................................................................................................................................................................................................................................
SSID
Service Set Identifier
Stranded
Wires twisted together to form a strong flexible cable.
Surge protector
Protective device used to limit surge voltages by discharging or bypassing any unwanted surge
current that may enter a building or equipment.
FCC FILING
Glossary
SW
Software
Sweep
To vary the frequency of a signal over a whole band as a means of checking the response of
equipment under test.
...................................................................................................................................................................................................................................
T1
A four-wire voice and data trunking facility that carries 24 duplex channels over 56-kbps time
slots.
TCO
Total Cost of Ownership
THHN (Thermoplastic high-heat resistant nylon-coated)
Three-phase
An alternating current supply with three sinusoidal voltages differing in phase by 120°.
THWN (Thermoplastic heat and water resistant nylon-coated)
TN
In a TN earthing system, one of the points in the generator or transformer is connected with earth,
usually the star point in a three-phase system. The body of the electrical device is connected with
earth by means of this earth connection at the transformer.
TPC
Transmit Power Control
TT
In a TT earthing system, the protective earth connection of the consumer is provided by a local
connection to earth, independent of any earth connection at the generator.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
GL-19
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
TRDU (Transmit Receive Duplex Unit)
FCC FILING
Glossary
....................................................................................................................................................................................................................................
Twisted pair cable
Cable made up of one or more separately insulated twisted-wire pairs, none of which is arranged
with another to form quads.
Tx / TX
Transmit
TYP (Typical)
...................................................................................................................................................................................................................................
U-NII
Unlicensed National Information Infrastructure
UBC
Uniform Building Code
UE
User Equipment
UL
Uplink
UL® (Underwriters Laboratories)
Laboratories that test and approve materials and equipment against predetermined performance
standards.
UMTS
Universal Mobile Telecommunications System
UV (Ultraviolet)
The portion of the electromagnetic spectrum in which the longest wavelength is just below the
visible spectrum, extending from approximately 4 nm to approximately 400 nm. Some authorities
place the lower limit of UV at values between 1 nm and 40 nm, 1-nm being the upper wavelength
limit of X-rays. The 400-nm limit is the lowest visible wavelength, that is, the highest visible
frequency, violet.
...................................................................................................................................................................................................................................
FCC FILING
V (Volt)
The derived SI unit of electrical potential difference. It is the difference in potential between two
points of a conducting wire carrying a constant current of 1 A when the power dissipated between
these two points is equal to 1 W.
Vac (Volts Alternating Current)
VCC
An electronics designation that refers to voltage from a power supply connected to the "collector"
terminal of a bipolar transistor. Double letters “cc” refer to power supply voltages.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
GL-20
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
....................................................................................................................................................................................................................................
VDC (Volts Direct Current)
Venue
The general area, such as a stadium, enterprise campus, or airport terminal.
VLAN
Virtual Local Area Networks
VoLTE
Voice over LTE
FCC FILING
Glossary
VPN
Virtual Private Network
Vrms (Volts Root Mean Square)
VSWR (Voltage Standing Wave Ratio)
In a transmission line, the ratio of maximum to minimum voltage in a standing wave pattern. The
VSWR is a measure of impedance mismatch between the transmission line and its load. The
higher the VSWR, the greater the mismatch. The minimum VSWR, that is, that which
corresponds to a perfect impedance match, is unity.
...................................................................................................................................................................................................................................
W (watts)
The derived SI unit of power. It is equivalent to 1 j/s or 1 volt-ampere.
W-CDMA / WCDMA
Wideband Code Division Multiple Access
Walk-through
A critical examination of a design or product undertaken to ensure that it is of adequate quality.
Waveform
The characteristic shape of a periodic wave, determined by the frequencies present and their
amplitudes and relative phases.
WEEE
Waste Electrical and Electronic Equipment regulation
Wi-Fi
WICL
Wireless Internet Command Language
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
GL-21
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
Wireless local area network (WLAN) products that are based on the Institute of Electrical and
Electronics Engineers' (IEEE) 802.11 standards. Wi-Fi is a registered trademark of the Wi-Fi
Alliance.
FCC FILING
Glossary
....................................................................................................................................................................................................................................
WLAN
Wireless local area network (WLAN) products that are based on the Institute of Electrical and
Electronics Engineers' (IEEE) 802.11 standards. Wi-Fi is a registered trademark of the Wi-Fi
Alliance.
WMM (9471 WMM)
The Alcatel-Lucent 9471 Wireless Mobility Manager (WMM) is the Serving GPRS Support Node
and Mobility Management Entity (SGSN/MME) in the converged wireless packet core network. It
performs mobility and session management signaling and packet data switching for GSM,
WCDMA, and LTE access networks.
WMM®
Wi-Fi Multimedia™ (WMM®) is a Wi-Fi Alliance® interoperability certification, based on the
IEEE 802.11e standard, providing basic QoS features to 802.11 networks.
WMM, is a registered trademark of the Wi-Fi Alliance.
WMS
Wireless Management System
WPS
Wireless Provisioning System
...................................................................................................................................................................................................................................
x-pol
FCC FILING
Cross polarization
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
GL-22
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015
A Antenna
RF antenna, 2-9
FCC FILING
Index
.............................................................
.............................................................
G Glossary
P Physical description, 2-4
Authority having jurisdiction
(AHJ)
definition of, GL-2
.............................................................
Terms, acronyms, and
abbreviations, GL-1
.............................................................
H Hardware and ancillary items
B Basic site requirements
Power supply, 2-8
Pre-installation, 3-3
product conformance statements,
B-1
9768 CMRO ancillary items,
2-14
Product delivery contents, 3-3
.............................................................
9768 CMRO base items, 2-14
product labeling, 2-10
C Compact Metro Radio Outdoor
Fiber optic cable for daisy
chaining, 2-17
Installation clearances, 3-5
connectors, 2-7
Product features and attributes, 2-2
.............................................................
S Standard pole mount, 3-7
Fronthaul, 2-8
Fiber optic cable for fronthaul,
2-16
physical description, 2-4
Grounding, 2-15
status indicators, 2-9
power supply, 2-8
Installation kits, 2-14
Supported installation options
product labeling, 2-10
Power, 2-15
Daisy chain, 2-11
RF antenna, 2-9
RF antenna, 2-16
Standard, 2-11
status indicators, 2-9
SFP modules, 2-15
.............................................................
weights and dimensions, 2-4
Solar Shield, 2-17
T Tools, 3-4
Connectors, 2-7
.............................................................
Standard wall mount, 3-12
typographical conventions
.............................................................
D Device placement, 3-3
.............................................................
.............................................................
.............................................................
L LED state description, A-1
W Weights and dimensions, 2-4
F Fronthaul, 2-8
.............................................................
Installation materials, 3-3
describing, xiv
tools, 3-4
....................................................................................................................................................................................................................................
Alcatel-Lucent 9768 Compact MRO
Alcatel-Lucent – Proprietary
IN-1
3MN-CMRO-B66-IMOP
Use pursuant to applicable agreements
Issue 1 December 2015
FCC FILING
M Metro Dock Indoor
FCC FILING
FCC FILING
Index
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9768 Compact MRO
IN-2
Use pursuant to applicable agreements
3MN-CMRO-B66-IMOP
Issue 1 December 2015

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Author                          : Alcatel-Lucent
Create Date                     : 2015:12:03 01:54:08Z
Keywords                        : Vol, 1, of, 1, 3MN-CMRO-B66-IMOP, Issue, 1, Date, December, 2015
Modify Date                     : 2015:12:04 09:55:46+01:00
Subject                         : Hardware Installation
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : ALDoc XML R13.0
Metadata Date                   : 2015:12:04 09:55:46+01:00
Format                          : application/pdf
Description                     : Hardware Installation
Title                           : Alcatel-Lucent 9768  Compact Metro Radio Outdoor  Hardware Installation
Creator                         : Alcatel-Lucent
Producer                        : Acrobat Distiller 9.5.5 (Windows)
Document ID                     : uuid:8fba3ad4-9d96-41aa-a8e6-1a09fd59d34d
Instance ID                     : uuid:41b11b00-c862-4fa7-bb77-b32825ae4219
Page Mode                       : UseOutlines
Page Count                      : 100
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AEEH-CMROB66AC2X5

Navigation menu