Alcatel Lucent France MI-V2-250MW-DB 9363 METRO CELL INDOOR V2.0 1900/850MHz 250mW User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	1588980
Application ID	oddTQrlTe1uf3gsqUUEy4Q==
Document Description	Users Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	66.89kB (836064 bits)
Date Submitted	2011-11-28 00:00:00
Date Available	2011-11-28 00:00:00
Creation Date	2011-06-28 17:15:36
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2011-06-30 13:31:42
Document Title	E:\新資料夾\06.28.11\原稿\501319120000 Model (1)
Document Creator	PScript5.dll Version 5.2.2
Document Author:	XQ.YU

DDCC-ChungLi
Document is
Released
2011.06.30
13:31:41 +08'00'
Use pursuant to applicable agreements
<附件>
Title page
Alcatel-Lucent 9363
Metro Cell - Indoor V2 2100MHz and 1900/850MHz
Installation and commissioning
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
401-387-097
Issue 1
May 2011
Use pursuant to applicable agreements
Legal notice
Legal notice
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective
owners.
The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
Copyright © 2011 Alcatel-Lucent. All rights reserved.
Contains proprietary/trade secret information which is the property of Alcatel-Lucent and must not be made available to, or copied or used by anyone outside
Alcatel-Lucent without its written authorization.
Not to be used or disclosed except in accordance with applicable agreements.
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
Contents
About this document
vii
Purpose ............................................................................................................................................................................................ vii
Reason for revision
..................................................................................................................................................................... vii
vii
New in this release
...................................................................................................................................................................... vii
vii
Intended audience
....................................................................................................................................................................... vii
vii
Supported systems
...................................................................................................................................................................... vii
vii
How to use this document ....................................................................................................................................................... viii
viii
Safety information
..................................................................................................................................................................... viii
viii
Prerequisites ................................................................................................................................................................................. viii
viii
Conventions used
....................................................................................................................................................................... viii
viii
Related information ................................................................................................................................................................... viii
viii
Document support
........................................................................................................................................................................ ix
ix
Technical support .......................................................................................................................................................................... ix
ix
How to order ................................................................................................................................................................................... ix
ix
How to comment ........................................................................................................................................................................... ix
ix
Safety statements
Overview ...................................................................................................................................................................................... 1-1
1-1
Structure of safety statements ............................................................................................................................................... 1-2
1-2
Safety
........................................................................................................................................................................................... 1-4
1-4
Safety - specific hazards ......................................................................................................................................................... 1-5
1-5
Product safety ............................................................................................................................................................................. 1-8
1-8
Product overview
Overview ...................................................................................................................................................................................... 2-1
2-1
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
iii
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Contents
....................................................................................................................................................................................................................................
Functional description ............................................................................................................................................................. 2-2
2-2
Physical description
................................................................................................................................................................. 2-5
2-5
Metro Cell installation and commissioning
Overview ...................................................................................................................................................................................... 3-1
3-1
Pre-installation information
.................................................................................................................................................. 3-2
3-2
To mount the hardware to a wall or ceiling ..................................................................................................................... 3-4
3-4
Metro Cell - Indoor cabling
.................................................................................................................................................. 3-8
3-8
Metro Cell - Indoor commissioning process ................................................................................................................ 3-14
3-14
Post installation activities and checks ............................................................................................................................. 3-15
3-15
Product specifications
Overview ...................................................................................................................................................................................... 4-1
4-1
Environmental and regulatory specifications
................................................................................................................. 4-2
4-2
Metro Cell - Indoor wall mount spacer
Overview ..................................................................................................................................................................................... A-1
A-1
Wall mount spacer
................................................................................................................................................................... A-2
A-2
Product conformance statements
Overview ..................................................................................................................................................................................... B-1
B-1
European Union ........................................................................................................................................................................ B-2
B-2
United States .............................................................................................................................................................................. B-6
B-6
Glossary
Index
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
iv
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011
List of figures
2-1
Alcatel-Lucent 9363 Metro Cell - Indoor
........................................................................................................ 2-2
2-2
Alcatel-Lucent 9363 Metro Cell - Indoor (2100 MHz variant)
................................................................ 2-5
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
About this document
About this document
Purpose
The purpose of this document is to provide hardware installation instructions for the
Alcatel-Lucent 9363 Metro Cell - Indoor V2 2100MHz. and 1900/850MHz.
Procedures are provided for product handling, placement, grounding, powering on and
off, and cabling.
Reason for revision
The reissue reasons are:
Issue number
Issue Date
Reason for reissue
May 2011
Standard issue
New in this release
New features:
•
None
Other changes:
•
None
Intended audience
The audience for this document is Installation personnel.
Supported systems
This document applies to the Alcatel-Lucent 9363 Metro Cell - Indoor V2 2100MHz and
1900/850MHz
...................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
vii
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
About this document
....................................................................................................................................................................................................................................
How to use this document
Start with the first chapter and work through the manual to the end. Once you have done
this, you will have carried out the hardware installation completely and in the proper
sequence.
Prior to installing the product, the installer should be familiar with the safety precautions,
warnings, and product conformance statements.
Safety information
For your safety, this document contains safety statements. Safety statements are given at
points where risks of damage to personnel, equipment, and operation may exist. Failure to
follow the directions in a safety statement may result in serious consequences.
Prerequisites
None
Conventions used
Vocabulary conventions
None
Typographical conventions
None
Related information
For information on subjects related to the content of this document, refer to the
documents listed in the following table:
Refer to this document
At this location
For more information on
Alcatel-Lucent W-CDMA
System - Safety Guide,
401-382-880
http://support.alcatel-lucent.
com.
Safety guidelines and the
catalog of hazard statements
that appear in the
Alcatel-Lucent W-CDMA
customer documents.
Alcatel-Lucent 9364 Metro
Cell Indoor and Outdoor
Troubleshooting,
401-387-076
http://support.alcatel-lucent.
com.
Troubleshooting procedures
for the Metro Cell Indoor
Standard for Installation of
Lightning Protection Systems,
NFPA
Lightning protection systems
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
viii
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011
About this document
....................................................................................................................................................................................................................................
Refer to this document
At this location
Recommended Practices on
Surge Voltages in Low
Voltage AC Power Circuits,
IEEE C62.41 (Latest Edition)
For more information on
Power
Document support
For support in using this or any other Alcatel-Lucent document, contact Alcatel-Lucent at
one of the following telephone numbers:
•
•
1-888-582-3688 (for the United States)
1-317-377-8618 (for all other countries)
Technical support
For technical support, contact your local Alcatel-Lucent customer support team. See the
Alcatel-Lucent Support web site (http://www.alcatel-lucent.com/support/) for contact
information.
How to order
To order Alcatel-Lucent documents, contact your local sales representative or use Online
Customer Support (OLCS) (http://support.alcatel-lucent.com).
How to comment
To comment on this document, go to the Online Comment Form (http://infodoc.alcatellucent.com/comments/enus/) or e-mail your comments to the Comments Hotline
(comments@alcatel-lucent.com).
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
ix
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
About this document
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011
1
Safety statements
Overview
Purpose
This chapter provides general information on the structure of safety instructions and
summarizes general safety requirements.
General safety and residual risk
The equipment has been developed in line with state-of-the-art technology and conforms
with current national and international safety requirements.
The equipment is considered safe during normal operation when safe working practices
are complied with. However, hazards may arise if procedures are not followed correctly
or safe working practices are not complied with.
Contents
Structure of safety statements
1-2
Safety
1-4
Safety - specific hazards
1-5
Product safety
1-8
...................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
1-1
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Safety statements
Structure of safety statements
....................................................................................................................................................................................................................................
Structure of safety statements
Overview
Safety statements describe the safety risks relevant while performing tasks on
Alcatel-Lucent products during deployment and/or use. Failure to avoid the hazards may
have serious consequences.
General structure
Safety statements include the following structural elements:
MP
CAUTION
Lifting hazard
SA
Lifting this equipment by yourself can result in injury
due to the size and weight of the equipment.
Always use three people or a lifting device to transport
and position this equipment.
[ABC123]
Item
Structure element
Purpose
Safety alert symbol
Indicates the potential for personal injury
(optional)
Safety symbol
Indicates hazard type (optional)
Signal word
Indicates the severity of the hazard
Hazard type
Describes the source of the risk of damage or
injury
Safety message
Consequences if protective measures fail
Avoidance message
Protective measures to take to avoid the hazard
Identifier
The reference ID of the safety statement
(optional)
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
1-2
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011
Safety statements
Structure of safety statements
....................................................................................................................................................................................................................................
Signal words
The signal words identify the hazard severity levels as follows:
Signal word
Meaning
DANGER
Indicates an extremely hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
NOTICE
Indicates a hazardous situation not related to personal injury.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
1-3
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Safety statements
Safety
....................................................................................................................................................................................................................................
Safety
General precautions for installation procedures
WARNING
Failure to observe these safety precautions may result in personal
injury or damage to equipment.
•
Read and understand all instructions.
•
Follow all warnings and instructions marked on this product.
•
Installation and maintenance procedures must be followed and performed by
trained personnel only.
•
The equipment must be provided with a readily accessible disconnect device
as part of site preparation.
Grounding and circuit continuity is vital for safe operation of the equipment.
Never operate the equipment with grounding/bonding conductor
disconnected.
Install only equipment identified in the product's installation manual. Use of
other equipment may result in an improper connection which could lead to
fire or injury.
•
•
•
•
•
•
•
•
•
•
Use caution when installing or modifying telecommunications lines.
The product has multiple power inputs. Before servicing, Disconnect all
inputs to reduce the risk of energy hazards.
For continued protection against risk of fire, all fuses used in this product
must be replaced only with fuses of the same type and rating.
Never install telecommunications wiring during a lightning storm.
Never install telecommunications connections in wet locations.
Never touch uninsulated wiring or terminals carrying direct current or
ringing current, and never leave this wiring exposed. Protect and tape
uninsulated wiring and terminals to avoid risk of fire, electrical shock, and
injury to personnel.
Never spill liquids of any kind on the product.
To reduce the risk of an electrical shock, do not disassemble the product.
Opening and removing covers and/or circuit boards may expose you to
dangerous voltages or other risks. Incorrect reassembly can cause electrical
shock when the unit is subsequently used.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
1-4
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011
Safety statements
Safety - specific hazards
....................................................................................................................................................................................................................................
Safety - specific hazards
DANGER
Electric-shock hazard
Working in severe weather can result in personal injury or death and damage to the
equipment.
Never install or perform maintenance during severe weather (high winds, lightning,
blizzards, hurricane etc.).
DANGER
Noxious-substance hazard
Use of unspecified cleaning agents can result in personal injury.
Use only specified cleaning agents. Never use flammable solvents.
Always ensure there is adequate ventilation in the work area and wear the appropriate
personal protective equipment.
WARNING
Electric-shock hazard
Some parts of all electrical installations are energized. Failure to observe this fact and
the safety warnings may lead to bodily injury and property damage.
For this reason, only trained and qualified personnel (electrical workers as defined in
IEC 60215 + A1 or EN 60215) may install or service the installation.
WARNING
Electric-shock hazard
The power supply lines to the network element are energized. Contact with parts carrying
voltage can cause health problems, possibly including death, even hours after the event.
Open and lockout the load disconnect switch in the distribution box to completely
de-energize the network element.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
1-5
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Safety statements
Safety - specific hazards
....................................................................................................................................................................................................................................
WARNING
Electric-shock hazard
This product may be connected to an AC main power supply and may contain an internal
battery supply. Disconnecting one power source may not de-energize the system, and can
lead to serious injury.
Disconnect and lock out the AC main power supply, if present, and the internal battery
supply, if present, before servicing the equipment.
NOTICE
ESD hazard
Semiconductor devices can be damaged by electrostatic discharges.
The following rules must be complied with when handling any module containing
semiconductor components:
•
•
•
•
•
•
•
•
•
Wear conductive or antistatic working clothes (for example, coat made of 100%
cotton).
Wear the grounded wrist strap.
Wear shoes with conductive soles on a conductive floor surface or conductive work
mat.
Leave the modules in their original packaging until ready for use.
Make sure there is no difference in potential between yourself, the workplace, and the
packaging before removing, unpacking, or packing a module.
Hold the module only by the grip without touching the connection pins, tracks, or
components.
Place modules removed from the equipment on a conductive surface.
Test or handle the module only with grounded tools on grounded equipment.
Handle defective modules exactly like new ones to avoid causing further damage.
NOTICE
Condensation
Sudden changes in the weather may lead to the formation of condensation on
components. Operating the unit when condensation moisture is present can destroy the
unit.
Units which show signs of condensation must be dried before installation.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
1-6
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011
Safety statements
Safety - specific hazards
....................................................................................................................................................................................................................................
NOTICE
Tools
Tools left in the working area can cause short circuits during operation which can lead to
the destruction of units.
Make sure after finishing your work that no tools, testing equipment, flashlights, etc.,
have been left in or on the equipment.
CAUTION
Hot-surface hazard
Touching a hot heater may cause burns.
Do not touch the heaters.
Before touching the units wait until they have cooled down, wear safety gloves and
clothes.
NOTICE
Corrosive-substance hazard
Cleaning plastic containers and lids with abrasive and aggressive cleaning agents may
cause permanent damage.
Do not use solvents, paraffin, abrasive or aggressive cleaning fluids, abrasive or
aggressive antiseptic agents or abrasive or aggressive materials.
NOTICE
Service-disruption hazard
Cleaning with water or a high-pressure cleaner will damage the components in the
cabinet.
The washing down of the equipment or cabinet with water or a high-pressure cleaner is
not permitted.
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
1-7
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Safety statements
Product safety
....................................................................................................................................................................................................................................
Product safety
Equipment safety
Safety information for this equipment can be found on various Caution, Warning, Danger,
information labels or instructions affixed to or included with the cabinet, its internal
assemblies or included within this document. Informational and cautionary labels may
appear near the item they address or may be grouped in a single location on the
equipment. Warnings are typically adjacent to the hazard that is noted on the label. The
instructions, cautions and warnings found on these labels must be understood and
observed by all personnel involved with the equipment installation and maintenance.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
1-8
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011
2
Product overview
Overview
Purpose
This chapter provides an overview of the Alcatel-Lucent 9363 Metro Cell - Indoor.
Contents
Functional description
2-2
Physical description
2-5
...................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
2-1
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Product overview
Functional description
....................................................................................................................................................................................................................................
Functional description
General description
The 9360 Small Cell solution has been developed to handle the increased demand of
solutions to efficiently address the residential fixed and mobile market.
The Alcatel-Lucent 9363 Metro Cell - Indoor is a public area wireless access node that
collapses the traditional 3G Node B and RNC functions into a single small unit.
Figure 2-1 Alcatel-Lucent 9363 Metro Cell - Indoor
Back view
Front view
Product deployment
The product can be deployed by mobile operators to provide a transparent indoor capacity
layer to complement the macro cell “umbrella” coverage layer. In the case of private
locations, such as coffee shops or restaurants, the Metro Cell may be privately owned and
may be deployed by building owners or local governments but remain controlled by the
operator using their spectrum resources.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
2-2
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011
Product overview
Functional description
....................................................................................................................................................................................................................................
V2 product description
Two variants of the Metro Cell - Indoor exist:
•
2100 MHz
•
1900/850 MHz
Metro Cell - Indoor 2100 MHz
This table lists the characteristics of the 2100 MHz variant.
Metro
Cell
Indoor
V2
Features
Frequency
Power
Frequency Band:
2100 MHz
Power can be
suppled via:
3G Sniffer
Frequency band:
900/2100 MHz
•
The router or a
PoE+ injector
•
48V DC power
adaptor
2G Sniffer
Frequency bands:
900/1800 MHz
Power consumption
is maximum 25W
and typically 20W
User
capacity
Supports up
to 32 users
with full
speed HSPA
(14.4 Mbps
L1 HSDPA
bearer and
5.7 Mbps
L1 HSUPA
bearer)
Characteristics
Supports Rx space
diversity
Maximum transmit
power of 250 mW at
antenna connector
(enabling wider cell
coverage)
Temperature range: -5
to +45 0C
Wall mounted or false
ceiling installation
options, vertically or
horizontally
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
2-3
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Product overview
Functional description
....................................................................................................................................................................................................................................
Metro Cell 1900/850 MHz
This table lists the characteristics of the 1900/850 MHz variant.
Metro
Cell
Indoor
V2
Features
Frequency
Frequency Band:
1900 and 850
MHz
Power
Power can be
suppled via:
•
3G Sniffer
Frequency band:
1900/850 MHz
The router or a
PoE+ injector
•
48V DC power
adaptor
2G Sniffer
Frequency bands:
1900/850 MHz
Power consumption
is maximum 25W
and typically 20W
User
capacity
Supports up
to 32 users
with full
speed HSPA
(14.4 Mbps
L1 HSDPA
bearer and
5.7 Mbps
L1 HSUPA
bearer)
Characteristics
Supports Rx space
diversity
Assisted GPS
capability for
localization of the unit
Maximum transmit
power of 250 mW at
antenna connector
(enabling wider cell
coverage)
Temperature range: -5
to +45 0C
Wall mounted or false
ceiling installation
options, vertically or
horizontally
Installation options
The Alcatel-Lucent 9363 Metro Cell - Indoor is designed to be used indoors can be
installed using the following options:
•
•
wall mounted
in a false ceiling
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
2-4
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011
Product overview
Physical description
....................................................................................................................................................................................................................................
Physical description
Product overview
The Alcatel-Lucent 9363 Metro Cell - Indoor is housed in an Alcatel-Lucent generic
metallic case with a pair of antenna connectors located at the top of the device for
external antennas, as shown below:
Figure 2-2 Alcatel-Lucent 9363 Metro Cell - Indoor (2100 MHz variant)
Antenna
RJ45 (PoE)
Port 1
Power jack
connector
Reset
button
On/Off
LEDs
Grounding
point
Note: The Alcatel-Lucent 9363 Metro Cell - Indoor 1900/850 MHz variant will have
a second Ethernet port and additional LEDs.
Physical data
The physical characteristics of the Metro Cell - Indoor (without the power supply unit)
are:
Dimensions (Height x Width x
Depth)
241 x 241 x 53 mm (9.48 x 9.48 x 2.08 in)
Weight
<2.0 Kg (<4.4 lb)
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
2-5
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Product overview
Physical description
....................................................................................................................................................................................................................................
Connectors
Connectors provided are:
Connection location
Description
At the top of the unit
Two external antenna connectors, type N
At the bottom of the unit
1 Ethernet connector for backhaul connection: 10/100 Base T
RJ45 connector. This connector is connected to a PoE+
capable router or a PoE+ power injector in order to supply
power.
Power Supply jack connector. When the AC/DC power
adaptor is used to supply the power (in this case the PoE+
capable router is not used)
A ground connector.
1 Ethernet connector for connectivity to other devices
(1900/850 MHz variant only)
SMA connector for external GPS antenna (1900/850 MHz
variant only)
Power supply
The Metro Cell - Indoor can be powered via:
•
•
48V PoE+ (if supported). When the router is not 48V PoE+ capable, a power injector
must be added to supply power.
External 48V DC power adaptor can be used (in this case power injector is not used).
Antenna
The Metro Cell - Indoor has two external RF antenna connectors, type N, located on the
top the device. The pair of antennas provide TX/RX and sniffing, and enable Rx diversity
capability on the Metro Cell - Indoor.
Debug interface
A number of LEDs and a reset button are hidden behind a removable cover for debugging
purposes.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
2-6
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011
Product overview
Physical description
....................................................................................................................................................................................................................................
Three LEDs provide status indication for:
•
•
Power
System
•
Phone (Device)
The Alcatel-Lucent 9363 Metro Cell - Indoor 1900/850 MHz variant will have additional
LEDs providing status indication for:
•
•
GPS
Second Ethernet port
Additional LEDs for Ethernet connectivity status are available at the Ethernet Port.
Product labelling
A product label provides the following information:
•
Model name
•
•
•
•
Part number
serial number
MAC address
CE Approval marking (2100 MHz variant) / FCC Approval marking (1900/850 MHz
variant)
Environmental marking (WEEE/ROHS) applicable to the device.
•
Product configuration
Metro Cell 2100 MHz
The Metro Cell - Indoor V2 2100 MHz product is delivered with the following base
items:
•
Metro Cell - Indoor unit
•
•
•
Ceiling/wall mounting kit
Power supply 48V DC (with country specific power cord)
Ethernet cable, 2 meters
Note: Metro Cell - Indoor unit can be supplied with or without a USIM card reader
(for authentication purposes).
Metro Cell 1900/850 MHz
The Metro Cell - Indoor V2 1900/850 MHz product is delivered with the following base
items:
•
•
•
Metro Cell - Indoor unit
Ceiling/wall mounting kit
Power supply 48V DC (with country specific power cord)
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
2-7
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Product overview
Physical description
....................................................................................................................................................................................................................................
•
•
Ethernet cable, 3 meters
External active GPS antenna with cable
Note: Metro Cell - Indoor unit can be supplied with or without a USIM card reader
(for authentication purposes).
Metro Cell - Indoor ancillary items
In addition to the base items the V2 Metro Cell - Indoor 2100 MHz and 1900/850 MHz
can be configured with the following variable and ancillary items:
•
Antenna:
–
–
+2dBi Omnidirectional or +4dBi Omnidirectional
+2dBi ceiling or +4dBi ceiling
•
PoE+ injector
•
•
A pair of RF jumpers (2 meters)
Spare Power Supply, 48V DC
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
2-8
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011
3
3 etro Cell installation and
commissioning
Overview
Purpose
This chapter provides the installation and commissioning procedures for the
Alcatel-Lucent 9363 Metro Cell - Indoor.
Contents
Pre-installation information
3-2
To mount the hardware to a wall or ceiling
3-4
Metro Cell - Indoor cabling
3-8
Metro Cell - Indoor commissioning process
3-14
Post installation activities and checks
3-15
...................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
3-1
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Metro Cell installation and commissioning
Pre-installation information
....................................................................................................................................................................................................................................
Pre-installation information
Product delivery contents
The V2 Metro Cell - Indoor is provided in a standard paper box. The contents are as
follows:
Metro Cell - Indoor 2100 MHz model
•
•
The V2 Metro Cell - Indoor access point
Power supply, 48V DC with country specific AC power cord
•
•
Ethernet cable, 2 meters
Wall or ceiling mounting kit (excluding collar kit)
Metro Cell - Indoor 1900 and 850 MHz model
The V2 Metro Cell - Indoor is provided in a standard paper box. The contents are as
follows:
•
•
•
•
•
The V2 Metro Cell - Indoor access point
Power supply, 48V DC with country specific AC power cord
Ethernet cable, 3 meters
Wall or ceiling mounting kit (excluding collar kit)
External active GPS antenna with 25 feet (7.62m) of cable
Variable parts and ancillary items
In addition to the standard delivered parts the following variable and ancillary items are
available:
•
Antennas:
•
•
•
– 2dBi omni directional antenna
– 4dBi omni directional antenna
– 2dBi ceiling antenna
– 4dBi ceiling antenna
RF jumper, 2 meters
A PoE+ power injector, with user guide
Spare power supply, 48V DC
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
3-2
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011
Metro Cell installation and commissioning
Pre-installation information
....................................................................................................................................................................................................................................
Device placement
The V2 Metro Cell - Indoor emits a radio signal similar to a Wi-Fi router. The quality of
coverage achieved therefore depends upon where the device is placed. For best results it
should be located:
•
In a central place within the public space
•
As high as possible, for example, high shelving, wall mounted
To improve coverage, avoid installing near the following:
•
Other radio transmitters
•
•
Other metallic devices or objects
Windows
Installation tools required
The following is a list of the tools that may be used during installation:
•
Drill and assorted drill bits
•
•
•
Pliers
Adjustable spanners
Screwdrivers (power and/or manual):
– Phillips (flat blade)
– Torx, T-10, T-20
Crimping tool (for RJ45 cable)
Measuring tape
Marker, to mark wall mounting holes
Vacuum cleaner or equivalent (required for clearing debris from wall mounting holes)
Spirit level
•
•
•
•
•
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
3-3
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Metro Cell installation and commissioning
To mount the hardware to a wall or ceiling
....................................................................................................................................................................................................................................
To mount the hardware to a wall or ceiling
Purpose
This topic describes the procedures to be followed when installing the Metro Cell - Indoor
onto a solid concrete wall or in a false ceiling.
Prerequisites
A site survey has been conducted and a location for the device has been selected that is
both central to the public space and elevated in order to maximize coverage.
Before installation begins you should ensure the following are in place:
•
Internet service is available.
•
•
The Ethernet cable has been routed and is in place.
The Ground cable has been routed and is in place.
•
Site specific fixing materials (screws, washers, wall plugs) for wall or ceiling
mounting the Metro Cell - Indoor.
Wall or ceiling mounting
Important! The Metro Cell - Indoor weighs less than 2kg and can be easily mounted
on any flat, sturdy wall or ceiling in a vertical or horizontal position.
However, various building materials and construction methods dictate that the device
be fastened to the wall or ceiling with appropriate mounting hardware. It is the
responsibility of the customer to provide any necessary support material and
structures to ensure that the installation will be in compliance with Building Officials
and Code Administrators (BOCA), Uniform Building Code (UBC), and all local
codes.
Before you begin
Note: Record the 11 digit serial number before mounting the Metro Cell - Indoor.
Wall mount installation
WARNING
Fall hazard
Falls can occur when working at heights resulting in serious personal injury or death.
To prevent a fall when working at heights (ladder, scaffold, manlift, roof etc.) follow safe
work practices and wear appropriate fall protection equipment.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
3-4
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011
Metro Cell installation and commissioning
To mount the hardware to a wall or ceiling
....................................................................................................................................................................................................................................
To mount the device onto a wall or ceiling, perform the following steps.
...................................................................................................................................................................................................
At the selected installation location, mark the points on the wall or ceiling for the four
fixing holes using the template in Appendix A, “Metro Cell - Indoor wall mount spacer”
as a guide.
Check the horizontal position with a spirit level.
...................................................................................................................................................................................................
Drill holes at the marked points and, if mounting on a wall, insert wall plugs into the
fixing holes.
Using the lifting point on the device align the bolt holes on the Metro Cell with the wall
or ceiling bolt holes:
...................................................................................................................................................................................................
Lifting point
Bolt holes
(8mm)
Bolt holes
(8mm)
...................................................................................................................................................................................................
Attach the device to the wall or ceiling using appropriate screw fixings.
Note: Depending on the wall or ceiling the device must be mounted to, different
screw fixings might be needed. After site survey these mounting accessories must be
procured locally.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
3-5
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Metro Cell installation and commissioning
To mount the hardware to a wall or ceiling
....................................................................................................................................................................................................................................
Device attach
points
Device attach
points
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
3-6
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011
Metro Cell installation and commissioning
To mount the hardware to a wall or ceiling
....................................................................................................................................................................................................................................
How to continue
After mounting the Metro Cell - Indoor to the wall or ceiling, the cables must be
connected. Continue with, “Metro Cell - Indoor cabling” (p. 3-8).
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
3-7
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Metro Cell installation and commissioning
Metro Cell - Indoor cabling
....................................................................................................................................................................................................................................
Metro Cell - Indoor cabling
Purpose
This topic describes the procedures to be followed when connecting the Metro Cell Indoor cables.
Power supply options
Power can be supplied to the Metro - Cell using two different methods.
Power over Ethernet (PoE)
Power can be supplied to the Metro Cell - Indoor using 48V PoE+ (Power over Ethernet)
via the Ethernet cable connection. The Ethernet cable has to be connected to a PoE+
capable router.
If no PoE+ capable router is available, a 48V DC Power Injector must be installed
between the router and the Metro Cell - Indoor.
For installation instructions, refer to the user guide located in the Power Injector box,
document number 06-0062-056.
External AC/DC power adaptor
When power is suppled using an external power adaptor, the Power Injector is not used.
If an external AC/DC power adaptor is used the power adaptor cord connects to the power
supply jack on the Metro Cell - Indoor.
Before you begin
Connect the pair of omnidirectional antennas to the antenna connectors on the device.
Important! Alcatel-Lucent recommends that the antenna connection nuts are torqued
to between 0,7 N.m minimum and 1,1 N.m maximum in order to avoid a potential
loose connection.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
3-8
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011
Metro Cell installation and commissioning
Metro Cell - Indoor cabling
....................................................................................................................................................................................................................................
Antenna
Connectors
(N female)
Connect the ground cable
Note: The grounding of the device depends on customer, country and site
requirements, therefore these should be checked beforehand.
The Metro Cell Indoor must be grounded with a 16 mm² ground cable (Type
NYY-1x16mm² or similar) to a grounding system. The grounding cable and cable lug
are not included in delivery and must be locally supplied.
To attach the ground cable perform the following steps.
...................................................................................................................................................................................................
Route the ground cable from the ground system to the Metro Cell - Indoor.
...................................................................................................................................................................................................
At the Metro Cell - Indoor cut the cable to a proper length, strip the cable end and crimp a
ground lug, with a hole suitable for an M6 screw, on the end of the cable.
Clean the contact surface area and use antioxidant to avoid oxidation.
...................................................................................................................................................................................................
Connect the ground cable to the grounding point on the Metro Cell - Indoor.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
3-9
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Metro Cell installation and commissioning
Metro Cell - Indoor cabling
....................................................................................................................................................................................................................................
Grounding
Point
...................................................................................................................................................................................................
Finally, secure grounding cable to the wall or ceiling.
E...................................................................................................................................................................................................
N D O F S T E P S
Ethernet cable lengths
The following diagram outlines the maximum cable length of the Metro Cell - Indoor
Ethernet cable connection.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
3-10
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011
Metro Cell installation and commissioning
Metro Cell - Indoor cabling
....................................................................................................................................................................................................................................
Total cable length 100m max
Metro Cell - Indoor
Ethernet Cable
DSL Router with
PoE+ function
Total cable length 100m max
Metro Cell - Indoor
Ethernet Cable
PoE+ Power
Injector
DSL Router with
PoE+ function
Connect the Ethernet cable
To attach the Ethernet cable perform the following steps.
...................................................................................................................................................................................................
Route the supplied Ethernet cable from the Metro Cell - Indoor to the Router/48V PoE+
injector.
Note: 48V PoE+ injector is not used when power is supplied via an external power
adaptor.
...................................................................................................................................................................................................
Plug one end of the Ethernet cable into the Ethernet connection port on the device.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
3-11
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Metro Cell installation and commissioning
Metro Cell - Indoor cabling
....................................................................................................................................................................................................................................
Ethernet cable
connection point
...................................................................................................................................................................................................
At the Router/PoE+ injector cut the cable to the required length and crimp the supplied
RJ45 connector onto the end of the cable.
Connect the Ethernet cable to the Router/PoE+ injector.
Finally, secure Ethernet cable to the wall or ceiling.
...................................................................................................................................................................................................
...................................................................................................................................................................................................
E...................................................................................................................................................................................................
N D O F S T E P S
A-GPS antenna cable connection (1900/850 MHz only)
The Alcatel-Lucent 9363 Metro Cell - Indoor 1900/850 MHz has Assisted GPS capability
for localization of the unit.
1 SMA connector is provided for the connection of an external GPS antenna.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
3-12
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011
Metro Cell installation and commissioning
Metro Cell - Indoor cabling
....................................................................................................................................................................................................................................
GPS antenna
connector (SMA)
How to continue
After antenna and cable connections are completed continue with “To commission the
Metro Cell - Indoor”.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
3-13
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Metro Cell installation and commissioning
Metro Cell - Indoor commissioning process
....................................................................................................................................................................................................................................
Metro Cell - Indoor commissioning process
Purpose
This section describes the 9363 Metro Cell - Indoor commissioning process. The 9363
Metro Cell - Indoor is self commissioning in the case of single device deployments.
Where multiple device deployments occur the operator may compliment zero-touch
commissioning with appropriate cell planning.
Troubleshooting
If any problems occur during the commissioning process refer to the following document:
•
Alcatel -Lucent Metro Cell - Indoor and Outdoor Troubleshooting, 401-387-076.
Commissioning process
The following steps outline the zero-touch commissioning process.
...................................................................................................................................................................................................
Power on the 9363 Metro Cell - Indoor. After 1-3 seconds the power supply status
indicator will light up and the Ethernet port status indicator will flash green.
After approximately 2 minutes the 9363 Metro Cell - Indoor will initialize and establish
connectivity. During this operation the System status indicator will blink slowly.
...................................................................................................................................................................................................
...................................................................................................................................................................................................
After the device has established a network connection the 9363 Metro Cell - Indoor will
automatically update it's software. This process takes approximately 15 minutes. During
this operation both the System and Phone (device) indicators will blink.
...................................................................................................................................................................................................
Once the software update has completed the 9363 Metro Cell - Indoor will carry out an
automatic reboot. During reboot the Power and System indicators will be on.
After rebooting the device will automatically auto-configure itself. During this operation
the System status indicator will blink slowly.
...................................................................................................................................................................................................
...................................................................................................................................................................................................
When the device is ready for use the Power, System and Phone (device) status indicators
will all be ON.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
3-14
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011
Metro Cell installation and commissioning
Post installation activities and checks
....................................................................................................................................................................................................................................
Post installation activities and checks
Connection cover attachment
Once the 9363 Metro Cell Indoor is commissioned and ready for use attach the
connection cover:
...................................................................................................................................................................................................
Check all cable connections are secure and correctly routed.
...................................................................................................................................................................................................
Using the supplied cover screws, attache the connection cover to the device:
Connection cover
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
3-15
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Metro Cell installation and commissioning
Post installation activities and checks
....................................................................................................................................................................................................................................
Final installation checks
Before leaving the installation site, check the following:
...................................................................................................................................................................................................
Secure all cables along their routes.
...................................................................................................................................................................................................
Verify that all the exterior conduit and cable connections are secure.
...................................................................................................................................................................................................
Inspect the site for loose tools, materials, and parts. Remove all such loose tools,
materials, and parts.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
3-16
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011
4
Product specifications
Overview
Purpose
This chapter details the Alcatel-Lucent 9363 Metro Cell - Indoor product environmental
specifications.
Contents
Environmental and regulatory specifications
4-2
...................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
4-1
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Product specifications
Environmental and regulatory specifications
....................................................................................................................................................................................................................................
Environmental and regulatory specifications
Overview
The 9363 Metro Cell Indoor conforms to 3GPP Release 8, including TS 25.101, TS
25.113, TS 45.005-1 and TS 25.104 on radio transmission and reception.
The solution meets the basic requirements of Directive 1999/5/EC on telecommunications
terminal equipment, regarding electromagnetic interference and also safety and health.
The Metro Cell - Indoor 2100 MHz is CE certified and is compliant with RoHS and
WEEE.
The Metro Cell - Indoor 1900 and 850 MHz are UL and FCC certified. It complies with
FCC part 15, Class B.
The Metro Cell Indoor 1900 and 850 MHz meets the OOBE requirements for the US as
defined in 47CFR24.238 for 1900 MHz systems and in 47CFR22.917 for 800 MHz
systems.
The Metro Cell - Indoor complies with the standards listed in the following sections.
Environmental operating conditions
The Metro Cell - Indoor is compliant with the following environmental operating
standards:
•
ETS300 019 class 3.1E (temperature range: -5° C to +45° C)
Health, safety, and environmental standards
The Metro Cell - Indoor is compliant with the following health, safety, and environmental
standards:
•
IEC 60950 (International)
•
•
•
•
•
IEC 60950-1
EN 50383
EN 50384 (2100 MHz only)
EN 50385
Directive 1999/519/EC On the limitation of exposure of the general public to
electromagnetic fields (0 Hz to 300 GHz)
Directive 2002/95/EC RoHS6
Directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE)
UL 60950, UL 1310, UL 60950, UL 758 (1900/850 MHz only)
ETS 300 753 class 4.1 (Acoustic) (1900/850 MHz only)
•
•
•
•
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
4-2
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011
Product specifications
Environmental and regulatory specifications
....................................................................................................................................................................................................................................
EMC (Electromagnetic compatibility)
The Metro Cell - Indoor product complies with the following EMC emission and
immunity requirements:
•
•
ETSI EN 301 489-1
ETSI EN 301 489-23
•
ETSI EN 301 908-1
•
•
ETSI EN 301 908-3
EN 55022 class 6 / CISPR22 Class A, with EN 55024 / CISPR 24 and OET-65
•
•
RTTE Directive 1999/5/EC
FCC part 15 Class B (1900/850 MHz only)
The Metro Cell - Indoor product complies with the following standards:
•
3GPP TS 25.113 Rel 8
Surge immunity
The Metro Cell Indoor tolerates an AC surge, as specified in EN 61000-4-5, Test Level 3.
The Metro Cell Indoor tolerates Electrical Fast Transients on the AC mains, as specified
in EN 61000-4-4, Test Level 3.
For the 1900/850 MHz model only, all cables uses UL 758 (Appliance Wiring Material)
verified materials
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
4-3
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Appendix A: Metro Cell - Indoor
wall mount spacer
Overview
Purpose
This section details the hole spacing to be drilled when the Metro Cell - Indoor is
mounted onto a wall or flat surface.
Contents
Wall mount spacer
A-2
...................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
A-1
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Metro Cell - Indoor wall mount spacer
Wall mount spacer
....................................................................................................................................................................................................................................
Wall mount spacer
Spacer template
218mm
Not to scale
218mm
Wall drill position for screws
(Note: Use screws suitable for a 8mm bolt hole)
Max tightening torque: 3 Nm
Washer (serial large) are advised
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
A-2
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011
Appendix B: Product
conformance statements
Overview
Purpose
This section presents the product conformance statements that apply to the Alcatel-Lucent
Metro Cell - Indoor equipment.
The statements that are required are determined primarily by national or multinational
regulations. However, in some regions, contract terms determine which statements are
required.
The presence of the statement indicates that the product does comply with that statement
wherever it is required to do so.
Contents
European Union
B-2
United States
B-6
...................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
B-1
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Product conformance statements
European Union
....................................................................................................................................................................................................................................
European Union
Introduction
The statements that follow are the product conformance statements that apply to the
Alcatel-Lucent Metro Cell Access Point equipment when deployed in the European
Union.
Declaration of Conformity for radio and telecommunication terminal equipment
under the scope of Directive 1999/5/EC.
Hereby, Alcatel-Lucent declares that the equipment documented in this publication is in
compliance with the essential requirements and other relevant provisions of Directive
1999/5/EC.
The technical documentation as required by the Conformity Assessment procedure is kept
at the Alcatel-Lucent location which is responsible for this product. For more information
please contact your local Alcatel-Lucent Customer Service Organization.
CE marking
This product has been CE-marked in accordance with the following European Directives:
•
1999/05/EC Radio and Telecommunication Terminal Equipment (R&TTE)
EMC compliance
The equipment complies with the following EMC specifications:
Standard reference
Title
EN 301 489 V1.8.1/-23 V1.3.1
Electromagnetic Compatibility (Article 3.1(b)
of the R&TTE Directive)
EN 55022:2006/A1:2007 Class B
EMC Directive (2004/108/EC)
EN 55024:1998/A1:2001/A2:2003
EMC Directive (2004/108/EC)
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
B-2
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011
Product conformance statements
European Union
....................................................................................................................................................................................................................................
Radio spectrum compliance
The equipment complies with the following radio spectrum specifications:
Standard reference
Title
EN 301 908-1/-3 V3.2.1
Radio Frequency Spectrum usage (Article 3.2
of the R&TTE Directive)
Product safety
The equipment complies with the following product safety specifications:
Standard reference
Title
EN 60950-1:2006+A11:2009
Safety (Article 3.1(a) of the R&TTE Directive)
EN 50385:2002
Health (Article 3.1(a) of the R&TTE Directive)
EN 50383:2002
Health (Article 3.1(a) of the R&TTE Directive)
Antenna exposure
Antenna attachment for the Alcatel-Lucent Metro Cell Access Point equipment shall be
performed in accordance with all applicable manufacturer's recommendations, and
national laws and regulations. To ensure correct antenna installation, the antenna installer
shall perform all necessary calculations and/or field measurements to evaluate compliance
with applicable national laws or regulations regarding exposure to electromagnetic fields.
The supplier of radio equipment, the supplier of antenna equipment and the integrator and
builder of the site must provide sufficient information so that the limits of the exclusion
zones can be determined. Any changes to the antenna or other equipment in the transmit
path may require re-evaluation of the exposures to electromagnetic fields.
Pursuant to
•
•
European Council Recommendation 1999/519/EC, “On the limitation of exposure of
the general public to electromagnetic fields”
ICNIRP (International Commission on Non-Ionising Radiation Protection),
“Guidelines for limiting exposure to time-varying electric, magnetic, and
electromagnetic fields”
All installations must be evaluated against the Reference Levels, and if necessary
exclusion zones for public and installation workers defined.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
B-3
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Product conformance statements
European Union
....................................................................................................................................................................................................................................
The following information on Alcatel-Lucent supplied equipment is available from
customer representatives:
•
•
Output power and antenna characteristic, if the product is equipped with an integral
antenna
A detailed description of at least one typical normal configuration, including antenna
system (feeders, connectors, combiners, antennas, etc.), if the product is intended to
be used with external antennas
•
Limit distances for general public and occupational exposure. If the product is
intended for use with external antennas, limit distances shall be given for the given
typical system configurations.
•
Information on how to specify exposure levels and limit distances for any optional
system configuration not specified in detail
•
Information on how to install the equipment/system or the external antennas in order
to ensure that the separation between the radiating antenna and general public are
exceeding the maximum allowed distances
Information on the methodology used for the determination of RF safety compliance
distances and exclusion zones, and the results of the compliance evaluation shall be
available for inspection by officials of the governing authorities.
Packaging collection and recovery requirements
Countries, states, localities, or other jurisdictions may require that systems be established
for the return and/or collection of packaging waste from the consumer, or other end user,
or from the waste stream. Additionally, reuse, recovery, and/or recycling targets for the
return and/or collection of the packaging waste may be established. For more information
regarding collection and recovery of packaging and packaging waste within specific
jurisdictions, contact the Alcatel-Lucent Environment, Health and Safety organization.
Recycling / take-back / disposal of products and batteries
In compliance with Waste Electrical and Electronic Equipment Directive (WEEE
Directive) 2002/96/EC 01/2003, amended by WEEE Directive 2003/108/EC 12/2003,
electronic products and batteries bearing or referencing the symbols shown below shall be
collected and treated at the end of their useful life, in compliance with applicable
European Union and other local legislation. They shall not be disposed of as part of
unsorted municipal waste. Due to materials that may be contained in the product and
batteries, such as heavy metals, the environment and human health may be negatively
impacted as a result of inappropriate disposal.
Note 1: For electronic products put on the market in the European Union, a solid bar
under the crossed-out wheeled bin indicates that the product was put on the market after
13 August 2005.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
B-4
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011
Product conformance statements
European Union
....................................................................................................................................................................................................................................
Note 2: For batteries put on the market in the European Union, a chemical symbol Hg
(mercury), Cd (cadmium), or Pb (lead), or a combination of those symbols, beneath the
cross-out wheeled bin indicates that the battery contains the corresponding heavy metals.
Moreover, in compliance with legal requirements and contractual agreements, where
applicable, Alcatel-Lucent will offer to provide for the collection and treatment of
Alcatel-Lucent products bearing the logo at the end of their useful life, or products
displaced by Alcatel-Lucent equipment offers.
For information regarding take-back of equipment by Alcatel-Lucent, or for more
information regarding the requirements for recycling/disposal of a product, please contact
your Alcatel-Lucent account manager. Visit the Alcatel-Lucent Take-Back
(http://www.alcatel-lucent.com/product_takeback) web page, or contact Alcatel-Lucent
Takeback Support at (mailto:takeback@alcatel-lucent.com). For technical information on
product treatment, consult the Alcatel-Lucent Recycling Information (http://www.
alcatel-lucent.com/product_recycling) web page.
Material content compliance
Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003
on the restriction of the use of certain hazardous substances in electrical and electronic
equipment (RoHS Directive) restricts the use of lead, mercury, cadmium, hexavalent
chromium, and certain flame retardants in electrical and electronic equipment. This
Directive applies to electrical and electronic products placed on the EU market after 1
July 2006, with various exemptions, including an exemption for lead solder in network
infrastructure equipment. Alcatel-Lucent products shipped to the EU after 1 July 2006
comply with the EU RoHS Directive.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
B-5
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Product conformance statements
United States
....................................................................................................................................................................................................................................
United States
Introduction
The statements that follow are the product conformance statements that apply to the
Alcatel-Lucent Metro Cell Access Point equipment when deployed in the United States.
Federal Communications Commission
Important! Changes or modifications not expressly approved by Alcatel-Lucent, Inc.
could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
FCC Part 15 Class B
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
Consult the dealer or an experienced radio/TV technician for help.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
B-6
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011
Product conformance statements
United States
....................................................................................................................................................................................................................................
FCC Part 68
This equipment complies with Part 68 of the FCC rules and the requirements adopted by
the ACTA. On this equipment is a label that contains, among other information, a product
identifier in the format of AAAEQ##TXXXX. If requested, this number must be provided
to the telephone company.
USOC
FIC
SOC
REN
The T1 network interface on this equipment is hardwired to a punchdown block, which
meets the FCC specifications.
If this equipment causes harm to the telephone network, the telephone company will
notify you in advance that temporary discontinuance of service may be required.
However, if advance notice is not practical, the telephone company will notify the
customer as soon as possible. Also, you will be advised of your right to file a complaint
with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations, or
procedures that could affect the operation of the equipment. If this happens, the telephone
company will provide advance notice in order for you to make necessary modifications to
maintain uninterrupted service.
FCC regulations prohibit the connection of customer-provided equipment to central office
implemented systems. Connection to party lines is subject to tariffs; users should contact
their state public utility commission, public service commission, or corporation
commission for information.
If the equipment is causing harm to the telephone network, the telephone company may
request that you disconnect the equipment until the problem is resolved.
If trouble is experienced with this equipment repair or warranty information may be
obtained by contacting:
Technical Support Services, within the United States: +1 630 224 4762, prompt 2
RF approval
This equipment complies with Part 2, Subpart J - Equipment Authorization Procedures, of
the FCC Rules.
This device complies with Part 22 – Public Mobile Services, Subpart H – Cellular
Radiotelephone Services.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
B-7
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Product conformance statements
United States
....................................................................................................................................................................................................................................
This equipment complies with Part 24 - Personal Communications Services, Subpart E Broadband PCS.
This equipment complies with Part 27 – Miscellaneous Wireless Communications
Services.
This equipment complies with Part 90 – Private Land Mobile Radio Services.
Product safety conformance
The Alcatel-Lucent Metro Cell Access Point equipment is Safety Certified ITE by CSA
International.
This Certification is marked on the equipment main nameplate label. Should the local
Authority Having Jurisdiction (AHJ) require prior or additional verification of this
Certification, a Product Certificate of Compliance can be obtained from the specific
Certification Body by the Business/Product Unit Applicant for the product or by
contacting:
Technical Support Services, within the United States: +1 630 224 4762, prompt 2
Any modifications to this equipment are not permitted without review and official written
authorization from the specific Certification Body. Unauthorized changes may violate the
Product Safety Certification. Modifications or changes authorized by official CN/CNN
are assumed to have received prior approval from this Lab.
Indoor applications
This equipment is intended for installation in restricted access locations where access is
controlled or where access can only be gained by service personnel with a key or tool.
Access to this equipment is restricted to qualified service personnel only.
Antenna exposure
Antenna installations for the Alcatel-Lucent Metro Cell Access Point equipment shall be
performed in accordance with all applicable manufacturer's recommendations, and
national laws and regulations. To ensure correct antenna installation, the antenna installer
shall perform all necessary calculations and/or field measurements to evaluate compliance
with applicable national laws or regulations regarding exposure to electromagnetic fields.
The supplier of radio equipment, the supplier of antenna equipment and the integrator and
builder of the site must provide sufficient information so that the limits of the exclusion
zones can be determined. Any changes to the antenna or other equipment in the transmit
path may require re-evaluation of the exposures to electromagnetic fields.
Pursuant to 47 CFR Part 1, Subpart I, subject to the provisions of section 1.1307, all
installations must be evaluated for requirements contained in Table 1, “Limits for
maximum permissible exposure,” in section 1.1310.
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
B-8
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011
Product conformance statements
United States
....................................................................................................................................................................................................................................
Packaging collection and recovery requirements
Countries, states, localities, or other jurisdictions may require that systems be established
for the return and/or collection of packaging waste from the consumer, or other end user,
or from the waste stream. Additionally, reuse, recovery, and/or recycling targets for the
return and/or collection of the packaging waste may be established. For more information
regarding collection and recovery of packaging and packaging waste within specific
jurisdictions, contact the Alcatel-Lucent Environment, Health and Safety organization or
Alcatel-Lucent Hazardous Waste Center technical support at (888) 539-2783.
Material content compliance
The following notification applies to Alcatel-Lucent products distributed for sale, resale,
or use.
This product, part, or both may include a lithium-manganese dioxide battery, which
contains very small amounts of a perchlorate substance. Special handling may apply.
For California:
Perchlorate Material - special handling may apply.
See (http://www.dtsc.ca.gov/hazardouswaste/perchlorate/).
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
B-9
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Glossary
...................................................................................................................................................................................................................................
Numerics
2G
Second-Generation Mobile Network
3G
Third-Generation Mobile Network
3GPP
Third-Generation Partnership Project
...................................................................................................................................................................................................................................
BOAC
Building Officials and Code Administrators
...................................................................................................................................................................................................................................
ETSI
European Telecommunications Standards Institute
...................................................................................................................................................................................................................................
HSUPA
High Speed Uplink Packet Access
...................................................................................................................................................................................................................................
Kg
kilogram
...................................................................................................................................................................................................................................
MAC
Media Access Control.
A protocol that determines how devices will share resources on a local area network.
Mbps
Megabits per second
...................................................................................................................................................................................................................................
NEMA
National Electrical Manufacturers Association.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
GL-1
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Glossary
....................................................................................................................................................................................................................................
Node B
Logical Node for radio Tx/Rx in one or more cells to/from UE.
...................................................................................................................................................................................................................................
PoE
Power over Ethernet
...................................................................................................................................................................................................................................
RNC
Radio Network Controller
RoHS
Restriction of Hazardous Substances Directive
...................................................................................................................................................................................................................................
UBC
Uniform Building Code
...................................................................................................................................................................................................................................
WEEE
Waste Electrical and Electronic Equipment Directive
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
GL-2
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011
Index
A additional optional items
Metro Cell - Indoor, 3-2
antenna
Metro Cell - Indoor, 2-6
installation, wall mounted
Metro Cell - Indoor, 3-4
.............................................................
M Metro Cell - Indoor
.............................................................
additional optional items, 3-2
C cabling
antenna, 2-6
Metro Cell - Indoor, 3-8
characteristics
Metro Cell - Indoor, 2-3, 2-4
commission
Metro Cell - Indoor, 3-14
connectors
cabling, 3-8
characteristics, 2-3, 2-4
commission, 3-14
connectors, 2-6
device placement, 3-3
functional description, 2-2
physical description
Metro Cell - Indoor, 2-5
post installation checks
Metro Cell - Indoor, 3-15
power supply
Metro Cell - Indoor, 2-6
pre-installation
Metro Cell - Indoor, 3-2
product delivery contents
Metro Cell - Indoor, 3-2
product labelling
Metro Cell - Indoor, 2-6, 2-7
installation options, 2-4
.............................................................
.............................................................
installation, wall mounted, 3-4
R regulatory
D device placement
physical data, 2-5
Metro Cell - Indoor, 2-6
Metro Cell - Indoor, 3-3
.............................................................
E environmental
specifications, 4-2
.............................................................
F functional description
Metro Cell - Indoor, 2-2
.............................................................
post installation checks, 3-15
S specifications
power supply, 2-6
pre-installation, 3-2
product delivery contents, 3-2
product labelling, 2-6, 2-7
tools, 3-3
Installation options
Metro Cell - Indoor, 2-4
environmental, 4-2
regulatory, 4-2
standards
electromagnetic compatibility,
4-3
.............................................................
EMC, 4-3
P physical data
environmental operating
conditions, 4-2
.............................................................
specifications, 4-2
physical description, 2-5
Metro Cell - Indoor, 2-5
health, 4-2
....................................................................................................................................................................................................................................
Alcatel-Lucent 9363 MC
Alcatel-Lucent – Proprietary
IN-1
401-387-097
Use pursuant to applicable agreements
Issue 1 May 2011
Index
....................................................................................................................................................................................................................................
safety, 4-2
surge immunity, 4-3
.............................................................
T tools
Metro Cell - Indoor, 3-3
....................................................................................................................................................................................................................................
Alcatel-Lucent – Proprietary
Alcatel-Lucent 9363 MC
IN-2
Use pursuant to applicable agreements
401-387-097
Issue 1 May 2011


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Format                          : application/pdf
Title                           : E:\新資料夾\06.28.11\原稿\501319120000 Model (1)
Creator                         : XQ.YU
Create Date                     : 2011:06:28 17:15:36+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2011:06:30 13:31:42+08:00
Metadata Date                   : 2011:06:30 13:31:42+08:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:7bb22eb6-f10c-4256-9001-947e769bd16b
Instance ID                     : uuid:ccdcef4f-374f-446b-9ce3-cb28c7db8e08
Has XFA                         : No
Page Count                      : 61
Author                          : XQ.YU

EXIF Metadata provided by EXIF.tools