Alco Electronics CN6212 Laptop User Manual
Alco Electronics Ltd Laptop
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3950169 |
| Application ID | ADjMqYwx9cLgiAYsX4kcYQ== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 174.64kB (2183015 bits) |
| Date Submitted | 2018-08-03 00:00:00 |
| Date Available | 2018-08-03 00:00:00 |
| Creation Date | 2018-07-13 16:16:10 |
| Producing Software | Adobe PDF Library 9.9 |
| Document Lastmod | 2018-08-02 14:00:42 |
| Document Title | User manual |
| Document Creator | Adobe InDesign CS5 (7.0) |
Laptop e-manual CN6212 F561 avita-americas.com IMPORTANT SAFETY INSTRUCTIONS Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should be observed during handling and use. • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments / accessories specified by the manufacturer. • Unplug this apparatus during lightning storms or when unused for long periods of time. • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. LIBER e-manual ADDITIONAL SAFETY INFORMATION • The AC adapter and apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. • Always leave sufficient space around the product for ventilation. Do not place product in or on a bed, rug, in a bookcase or cabinet that may prevent air flow through vent openings. • Do not place lighted candles, cigarettes, cigars, etc. on the product. • Care should be taken so that objects do not fall into the product. • Do not attempt to disassemble the cabinet. This product does not contain customer serviceable components. • To prevent the risk of fire or electric shock, do not expose this apparatus to rain or moisture. • Do not play your headset at high volume. Hearing experts warn against extended high-volume play. Battery safety! This device contains a built-in battery, improper use of which may result in explosion. Do not heat, open, puncture, mutilate, or dispose of the product in fire. Do not leave the device in direct sunlight for an extended period of time, which could cause melting or battery damage. The battery in this device is not user replaceable and should only be replaced by AVITA or a AVITA authorized Service Provider. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. LIBER e-manual FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CAN ICES-3(B) / NMB-3(B) LIBER e-manual This device complies with Industry Canada License-exempt RSS Standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. SAR The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/Kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna should be minimized. For body worn operation, this device has been tested and meets the FCC RF exposure. Warning: the AC adapter is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the mains plug from mains completely, the ac adapter should be disconnected from the mains socket outlet completely. The socket outlet shall be installed near the equipment and shall be easily accessible. LIBER e-manual Contents ImportantSafety Instruction ...................................................1 Getting Started ....................................................................... 6 Getting to know LIBER ...................................................................... 6 Charging LIBER ..................................................................................... 10 Turning LIBER on ...................................................................................12 Put LIBER to Sleep ..................................................................................15 Power Management .............................................................................16 Basics ....................................................................................... 17 Start menu ............................................................................................... 17 Fingerprint ......................................................................................... 20 Action center ......................................................................................... 21 Task view .................................................................................................. 23 Using the touchpad ............................................................................ 24 Using the keyboard ............................................................................. 27 Connections and Setup .......................................................... 30 External display ..................................................................................... 30 Connecting to a Wi-Fi network ....................................................... 33 Airplane mode ...................................................................................... 34 Bluetooth ...................................................................................... 35 Brightness ...................................................................................... 36 Volume ..................................................................................................... 37 Troubleshooting ...................................................................... 38 Specifications ........................................................................... 40 Legal and Safety Notices ......................................................... 41 LIBER e-manual Getting Started Getting to know LIBER Top view LIBER e-manual Microphone For voice input. Camera indicator The camera indicator lights up when the built-in camera is in use. Camera The built-in camera allows you to take still photos and record videos. Headphone jack Headphone connection for personal listening. Power indicator The power indicator lights up when the Notebook PC is powered on and blinks slowly when the Notebook PC is in Standby mode. Power button Press and hold it to turn the Notebook PC on or off. Touchpad Moves the cursor and selects options. Functions as a mouse. 8 Fingerprint sensor Touch it to open the PC screen if you set the fingerprint. LIBER e-manual Right side USB-C (Type C) port (5Vdc,1.5A) Connects to a USB storage device or a mouse, keyboard, or camera. DC jack Connects with 19V DC charger. Charging indicator Shows the battery's charge status. - Orange: Charging - Green: Fully charged - Orange (blinking): Low battery Dongle (option A) USB-A (Type A) port (5Vdc,1.5A) Connects to a USB storage device or a mouse, keyboard, or camera. HDMI port Connects with TV or external display. USB-C (Type C) port Connects to a USB storage device or a mouse, keyboard, or camera or support HDMI & Display (without charge function). LIBER e-manual Dongle (option B) USB-A (Type A) port (5Vdc,1.5A) Connects to a USB storage device or a mouse, keyboard, or camera. USB-C (Type C) port Connects to a USB storage device or a mouse, keyboard, or camera or support HDMI & Display (without charge function). HDMI port Connects with TV or external display. LIBER e-manual Charging LIBER IMPORTANT! Please Read. We recommend fully charging your Notebook PC before using it for the first time. For optimal operation, please connect the provided AC adaptor to your Notebook PC when it falls below 20% charge. Charging indicator Charging indicator To wall socket Status Orange: Charging Green: Fully charged Orange (blinking): Low battery LIBER e-manual 10 Note • Use ONLY the included AC Adaptor to charge the battery. • The AC Adaptor may vary in appearance, depending on models and your region. • Charging time will vary depending on remaining battery level. Charging from 0% to 70% will take approximately 1.5 hours. You may not be able to turn on your Notebook PC within a few minutes if the battery was fully drained. In order to keep the battery working in best condition, please pay attention to the following: • • • • The included AC adaptor is for use with this unit only. Do not use it with other equipment. Please do not charge the battery in high temperatures. Do not wait for the battery to be fully depleted before charging again. Keep the battery charged as needed. If your Notebook PC has not been used for a long period of time, the battery might be in over discharge protection mode and may take longer to charge. LIBER e-manual 11 Turning LIBER on Starting for the first time When using the Notebook PC for the first time, you will be required to setup the following: 1. Open the screen panel. you can adjust the angle according to the requirements. 2. Press and hold the Power button on your Notebook PC until the AVITA logo appears. Power on Standby (White) (White - blinking) LIBER e-manual 12 3. Select the language, then click 4. Follow the onscreen instructions to configure your Notebook PC. About Windows Activation Windows will be active automatically once you connect your Notebook PC to a WiFi network. LIBER e-manual 13 Turning LIBER off 1. Click the icon in the lower-left corner of the screen or Start key on the keyboard to get to the Start press the menu. Power icon in the lower-left corner of the 2. Click the screen, it will display 3 options (Sleep, Shut down and Restart). 3. Select Shut down to power the Notebook PC off. • • Note Save all data before turning your Notebook PC off. If your Notebook PC is unresponsive, press and hold the Power button for several seconds and follow the on-screen instructions to force SHUT DOWN the unit. LIBER e-manual 14 Putting LIBER to Sleep You can put your Notebook PC to Sleep mode by doing either of the following: • Go to the Start menu and click the Power icon in the lower-left corner of the screen, select and click Sleep. • Briefly press the Power button to put the Notebook PC in sleep mode. If you don’t operate for some time, the Notebook PC will enter sleep mode automatically. LIBER e-manual 15 Power Management When the apparatus is not connected power adaptor and not providing the main function or when other energy-using products are not dependent on its function, the default system settings and its characteristics enable the apparatus to activate display sleep mode within 5 minutes of user inactivity, and to activate a distinct sleep mode within 10 minutes of user inactivity. In the same scenario, when the apparatus is connected to power adaptor, will activate display sleep mode within 15 minutes of user inactivity, and activate a distinct sleep mode within 25 minutes of user inactivity. When in sleep mode, the system becomes fully usable within 5 seconds via network connections or user interface devices. The power management function is automatically switched on by the default system settings. Go to Settings -> System -> Power & sleep to manage how your Notebool PC use power. LIBER e-manual 16 Basics Start menu Microsoft Windows 10 is a new operating system that is used to icon in the lower-left corner of control a computer. Click the the screen to get to the Start menu. You can also open the Start menu by pressing the Start key on the keyboard. Live titles Taskbar Live Tiles on the screen change and update in real time so you can get real-time updates about news or sports, check what your friends are up to, and get the latest weather forecast. LIBER e-manual 17 Expand Click this icon in the upper-left corner of the screen to expand the START menu. Account options Click on your account name to change account settings, lock your device or sign out of your account. Settings Allows you to access the settings of your Notebook PC. Click it to enter the Settings screen. Power Click icon to Sleep, Shut down or Restart your Notebook PC. Start Click the LIBER e-manual Start icon to open/close the Windows Start menu. 18 Taskbar The below table lists some of the frequently used icons in the Taskbar: Icon Description Shows the battery status. Displays when a Wi-Fi network connected. Displays when Wi-Fi is turned on but there is NO a Wi-Fi network connection. Displays when Wi-Fi is turned off. Airplane mode is on. Adjusts the speaker volume. Launches Action Center Launches Search. Shows the recent task. Shows all opened tasks in a single view. Launches the File Explorer. LIBER e-manual 19 Fingerprint 1. Go to Settings -> Accounts-> Sign-in options-> to select the fingerprint. 2. Follow the onscreen instructions to input PIN, then touch the fingerprint senesor to set fingerprint. 3. Follow the onscreen instructions to finish other required setting. LIBER e-manual 20 Action Center It allows you to receive system notifications, such as updates. It also has a really useful quick actions on the bottom. Checking notifications 1. Click the icon in the lower-right corner of the screen to launch the ACTION CENTER screen. 2. All messages appears in the Action Center and you can select and click them to read. Tip: You can go to Settings -> System -> Notifications & actions to set the Notifications and Actions. • Note Select Expand or Collapse to expand or minimize the Quick Actions menu. LIBER e-manual 21 Quick Actions menu Tablet mode Opens or closes the Tablet mode. Connect Searches for wireless display and audio devices. Network Enables or disables Network, and connects to a wireless network so that you can check email, search the Web, access social media websites. All settings Allows you to access the settings of your Notebook PC. Airplane mode Enables or disables Airplane mode. Turns it on to stop all wireless communication. Location Enables or disables Location. If this setting is on, each person who signs in to this device can change their own location settings. Quiet hours Turns on/off Quiet hours. Mobile hotspot Actives the Mobile hotspot. Brightness level Allows you to set the brightness level of the screen. Night light Allows you to set the Night light level. Bluetooth Enables or disables Bluetooth. VPN Add a VPN connection. Battery saver Turns on/off Battery saver. Project Opens the Project options. LIBER e-manual 22 Task view If you have a lot of apps and programs opened, click the icon on the taskbar to see all of your running apps and programs. You can select and click any item to open it. Creating a new desktop Select and click + New desktop, a new desktop will be added. Then you can open your desired apps and programs on the new desktop. Desktop list Deleting a desktop Move the cursor over the desktop you want to delete, then select in the upper-right corner of the desktop. LIBER e-manual 23 Using the Touchpad Use the Touchpad to move the cursor or select an item. The left and right buttons of the Touchpad act the same as the left and right buttons of a mouse. Moving Slide your finger on the Touchpad to move the cursor. Left-click • In the Start menu, click an app to launch it. • On the File Explorer desktop, double click an application to launch it. Right-click • In the Start menu, click an app to select it and launch the Setting bar. • On the File Explorer desktop, click an application to open the right-click menu. LIBER e-manual 24 Dragging and dropping Press and hold the left button. Select an item using your other finger then drag and drop it to a new position. Two-finger scroll (up/down) Slide two fingers to scroll up or down. Two-finger scroll (left/right) Slide two fingers to scroll left or right. Zoom out Pinch two fingers while viewing a website, map, or image. LIBER e-manual 25 Zoom in Spread two fingers apart while viewing a website, map, or image. • Note Please keep your fingers dry and clean when using the Touchpad. LIBER e-manual 26 Using the Keyboard Function keys Press and hold the Fn key, then press a hot key to trigger the following commands: Turns the Airplane mode on and off. Decreases the screen brightness. Increases the screen brightness. Launches the Search Windows. Launches the Settings screen. Turns the speakers on and off. Decreases the sound volume. Increases the sound volume. Returns to the previous media file. LIBER e-manual 27 Plays or pauses a selected media file. Skips to the next media file. Switches between the display screen and an external monitor (if connected). Enables or disables the backlight. Enables or disables the Touchpad. Windows keys You can also use the following shortcuts to help you to launch the applications and navigate the Windows 10. Opens or closes the Start menu. Launches Action Center Launches the desktop Launches File Explorer Launches Feedback Hub LIBER e-manual 28 Launches Settings screen Launches the CONNECT screen Activates the Lock screen Minimizes all currently active windows Launches the PROJECT screen Opens the Run window Launches Search window Chooses the programs on the taskbar Opens Ease of Access setting menu Opens the context menu of the Start button Prints the current screen. LIBER e-manual 29 Connections and Setup External display You can connect the Notebook PC to an external display device. The cables required to connect an external display are sold separately. Connecting to a display 1. Connect the Notebook PC to a TV or other display device using an HDMI cable (not cluded) through the Mini HDMI port. USB TV dongle HDMI cable (not included) 2. Turn on your TV or other display device and select its input mode. 3. Go to Action Center menu, select and click Project. LIBER e-manual 30 4. Select your desired mode as following: PC screen only Shows the screen on the Notebook PC only. Duplicate Shows the screen on both the Notebook PC and the external display. Extend Extends the screen to the external display. Second screen only Shows the screen on the external display only. Tip: You can also select the dual view (extend) mode. Go to Settings -> System -> Display, and select Detect on the Multiple displays option. LIBER e-manual 31 Connecting to a Wi-Fi network Connect the Notebook PC to a wireless network to use the Internet. 1. On the Taskbar, select and click Access Point (AP) list 2. Select a network from the list of detected wireless networks and select Connect automatically -> Connect 3. Enter the Access Point's password, if necessary, and select Next. LIBER e-manual 32 Tip: You can also go to Settings -> Network & Internet -> Wi-Fi, click it to On. • • Note If the device finds a network that you connected to previously, it will connect to it automatically. If the Wi-Fi network does not appear in the list, it maybe a hidden network, please click "Hidden Network" and input SSID name of network along with password for a connection. LIBER e-manual 33 Airplane mode The Airplane mode disables the wireless connection, allowing you to use your Notebook PC safely while in-flight. If you see icon displayed in the lower-right corner of the screen, the Airplane mode is on. You should turn off the Airplane mode to enable the wireless network. 1. On the Taskbar, select and click 2. Select and click Airplane mode. Tip: You can also go to Settings -> Network & Internet -> Airplane mode, click it to On. LIBER e-manual 34 Bluetooth You can use Bluetooth to communicate between the Notebook PC and other Bluetooth devices, such as a smartphone. 1. Go to Action Center menu, select and click Bluetooth to turn it on. 2. Then the Notebook PC will be a discoverable bluetooth device and you can scan it on your other bluetooth device. Tip: You can also go to Settings -> Devices -> Bluetooth, click it to On. LIBER e-manual 35 Brightness You can adjust the brightness level of the screen accroding to your requirements. Using the keyboard to adjust brightness Press and hold the Fn key, then press the F2 key to decrease the brightness of the computer screen. Press and hold the Fn key, then press the F3 key to increase the brightness of the computer screen. Using the taskbar to adjust brightness Click the icon in the lower-right corner of the screen to launch the ACTION CENTER menu. Select and click brightness setting. LIBER e-manual 36 Volume You can adjust the system volume or sound volume when playing music or video. Using the keyboard to control volume Press and hold the Fn key, then press the F7 key to decrease the sound volume. Press and hold the Fn key, then press the F8 key to increase the sound volume. Using the taskbar to control volume on the Taskbar, then drag the adjustment Select and click bar to your desired volume. Volume adjustment bar LIBER e-manual 37 Troubleshooting When a problem occurs with the Notebook PC, it is easy to restore the Notebook PC to the factory default settings. Back up important data regularly before a problem occurs with the Notebook PC. You can go to Settings -> Update & security -> Recovery to recover your Notebook PC. Reset this PC If your PC isn't running well, resetting it might help. This lets you choose to keep your personal files or remove them, and then reinstalls Windows. Click Get started and then choose an option. Keep my files Removes apps and settings, but keeps your personal files. Remove everything Removes all of your personal files, apps, and settings. Advanced startup Start up from a device or disc (such as a USB drive), change your PC’s firmware settings, change Windows startup settings, or restore Windows from the system image. This will restart your PC. If you want to perform this action, click Restart Now. Note Third-party applications will be removed. LIBER e-manual 38 Q&A The device won’t start • This may happen if your battery is empty. Please connect the provided AC adapter to a wall outlet. Windows is not active automatically Windows will be active automatically once you connect your Notebook PC to a Wi-Fi network. • Make sure that you have a Wi-Fi network connection. Notebook PC displays network or service error message • When you are located in places with poor signal, your Notebook PC may lose its Wi-Fi connection. Try moving closer to the Wi-Fi router. Notebook PC is frozen or a serious error appears • If the Notebook PC is frozen or suspended, you may need to close the application or refresh your Notebook PC. • If the Notebook PC is frozen or slow to respond, press and hold the power button for several seconds and follow the on-screen instructions to force SHUT DOWN the unit, then press the power button to turn on your Notebook PC again. LIBER e-manual 39 Specifications Processor Intel® Core™ i5-7Y54 CPU Speed 1.2GHz RAM 8GB DDR3 Display 1920 x 1080 FHD, IPS Camera Front 2.0MP USB port USB 3.0 High speed WiFi Connection IEEE 802.11 b/g/n/ac Bluetooth Bluetooth 4.0 Power DC 19V (operates with supplied AC adaptor) Specifications and external appearance are subject to change without notice. LIBER e-manual 40 Legal and Safety Notices Copyright and Trademark Notices Intel, the Intel logo and the Intel Inside logo are trademarks of Intel Corporation in the U.S. and/or other countries. The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG Inc. Other trademarks and trade names are those of their respective owners. HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks, registered trademarks, or service marks of HDMI Licensing, LLC in the United States and/or other countries. About HDMI High-Definition Multimedia Interface (HDMI) is a high-speed digital interface that can transmit uncompressed high definition video and digital multichannel audio. It delivers high quality picture and sound quality. HDMI is fully backward compatible with DVI. As required by the HDMI standard, connecting to HDMI or DVI products without HDCP (High bandwidth Digital Content Protection) will result in no Video or Audio output. All other trademark appearing herein are the property of their respective owners. Specifications subject to change without notice. LIBER e-manual 41 Limited Warranty AVITA Computer makes the following limited warranty. This limited warranty extend to the original consumer purchaser and is limited to non-commercial use of the product. One Year Parts & Labor Warranty AVITA Computer products purchased in the United States or Canada are warranted to be free from defects in materials or workmanship for a period of one year from the date of their original retail purchase. If the unit fails to conform to this warranty, we will service the product using new or refurbished parts and products, at AVITA Computer’s sole discretion. During a period of one year from the effective warranty date, AVITA Computer will provide, when needed, service labor to repair a manufacturing defect at its designated Service Center. To obtain warranty service in the United States or Canada, you must first contact our Customer Support Center at support.avita-americas.com. The determination of service will be made by AVITA Computer Customer Support. PLEASE DO NOT RETURN YOUR UNIT TO AVITA Computer WITHOUT PRIOR AUTHORIZATION. New or remanufactured replacements for defective parts or products will be used for repairs by AVITA Computer at its designated Service Center for one year from the effective warranty date. Such replacement parts or products are warranted for an additional one year from the date of repair or replacement. The Customer will be required to ship the unit to the Service Center indicated at the time Customer Support is contacted to make the necessary repairs. The customer is responsible for all transportation charges to the service facility. LIBER e-manual 42 Packaging and Shipping Instruction When you send the product to the AVITA Computer service facility you must use the original carton box and packing material or an equivalent as designated by AVITA Computer. Your Responsibility (1) You must retain the original sale receipt to provide proof of purchase. (2) These warranties are effective only if the product is purchased and operated in the United States or Canada. (3) Warranties extend only to defects in material or workmanship, and do not extend to any product or parts which have been lost or discarded, or damage to product or parts caused by misuse, accident, improper operation or maintenance, or use in violation of instructions provided with the product, or to product which has been altered or modified without authorization of AVITA Computer, or to products or parts thereof which have had the serial number removed or changed. Out of Warranty In the event your product requires repair after the limited warranty period has expired, please contact our Customer Support Center at support.avita-americas.com Important: You are responsible for any transportation, shipping or insurance relative to the return of product to our Product Returns Center. All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose, are expressly limited to the duration of the limited warranties set forth above. With the exception of any warranties implied by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties, guarantees, agreements and similar obligations of LIBER e-manual 43 manufacturer or seller with respect to the repair or replacement of any parts. In no event shall AVITA Computer be liable for consequential or incidental damages. No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any manner whatsoever. The time within action must be commenced to enforce any obligation of AVITA Computer arising under the warranty or under any statute, or law of the United States or Canada or any state thereof, is hereby limited to one year from the date of purchase. This limitation does not apply to implied warranties arising under state law. This warranty gives you specific legal rights and you may also have other rights, which may vary, from state to state. Some states do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the exclusion or limitation of incidental or consequential damages, so the above provisions may not apply to you. For more information on other products and services, please visit our web site at: support.avita-americas.com Important: Also keep your “Bill of Sale” as proof of purchase. FOR SUPPORT AND SERVICE, PLEASE CONTACT US support.avitaamericas.com LIBER e-manual 44 FCC SUPPLIER’S DECLARAT ION OF CONFORMITY Product information Product Name: Laptop Model No.: CN212 Trade Mark: AVITA Applicable standards: FCC CFR Title 47 Part 15 Subpart B This device complies with related rules, operation is subject to the following two conditions. (1). This device may not cause harmful interference and, (2). This device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The test result has been evaluated by SHENZHEN HUATONGWEI INTERNATIONAL INSPECTION CO., LTD. laboratory and showed in the test report FCC ID:A2HCN6212, IC:9903A-CN6212 It is understood that each unit marketed is identical to the device as tested, and any changes to the device that could adversely affect the emission characteristics will require retest. LIBER e-manual 45 The following responsible party designated in FCC §2.909 is responsible for this declaration: Company Name: MLB INTERNATIONAL INC. Company Address: P.O. BOX 1214, LOCKPORT, NY 14095 Person-in-charged: Mario Boltri (Full Name) Telephone Number: 1-716-240-0902 Date: 13-July-2018 LIBER e-manual 46
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Has XFA : No XMP Toolkit : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15 Instance ID : uuid:5bff5d2e-3b29-48ed-b29d-c5444b0f1787 Document ID : xmp.did:DA818C177D85E81191F3C20C4AF0D616 Original Document ID : adobe:docid:indd:d6ef6f9f-5723-11e8-a241-d0836a27e48d Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:1E4830367885E81191F3C20C4AF0D616 Derived From Document ID : xmp.did:4FB5ADAE2457E811A9998826333A8BB2 Derived From Original Document ID: adobe:docid:indd:d6ef6f9f-5723-11e8-a241-d0836a27e48d Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:BC99AAA22457E811A9998826333A8BB2, xmp.iid:BD99AAA22457E811A9998826333A8BB2, xmp.iid:BE99AAA22457E811A9998826333A8BB2, xmp.iid:4FB5ADAE2457E811A9998826333A8BB2, xmp.iid:E59C4E112557E811A9998826333A8BB2, xmp.iid:D4712D4D2757E811A9998826333A8BB2, xmp.iid:B4DA833B2957E811A9998826333A8BB2, xmp.iid:32CAED8B3157E811A9998826333A8BB2, xmp.iid:462CC39F3157E811A9998826333A8BB2, xmp.iid:6512BF6E7159E8119041FFD5A4871052, xmp.iid:1E4F4EEE7259E8119041FFD5A4871052, xmp.iid:2BF3E9687359E8119041FFD5A4871052, xmp.iid:78E0F9CA7759E8119041FFD5A4871052, xmp.iid:79E0F9CA7759E8119041FFD5A4871052, xmp.iid:7AE0F9CA7759E8119041FFD5A4871052, xmp.iid:7BE0F9CA7759E8119041FFD5A4871052, xmp.iid:389FDA7F7E59E8119041FFD5A4871052, xmp.iid:7FE7DADC7F59E8119041FFD5A4871052, xmp.iid:1FD67A16B959E8119041FFD5A4871052, xmp.iid:78528059485AE811A9D39E24FCE6BE82, xmp.iid:D26C284E4B5AE811A9D39E24FCE6BE82, xmp.iid:AC201AF64B5AE811BA9EB092A4FF9322, xmp.iid:A6670D8B4F5AE811BA9EB092A4FF9322, xmp.iid:02D658E74F5AE811BA9EB092A4FF9322, xmp.iid:BEECF9CE6B5AE811BA9EB092A4FF9322, xmp.iid:967E4265765AE811BA9EB092A4FF9322, xmp.iid:1701D5E4805AE811BA9EB092A4FF9322, xmp.iid:DD672B44305EE811A369F23B24153DE5, xmp.iid:6C965B07395FE8119DECCEC3B75C6623, xmp.iid:08600CA12362E811851DB2B16647F185, xmp.iid:D60036132462E811851DB2B16647F185, xmp.iid:050A24AC5C62E811851DB2B16647F185, xmp.iid:2947F59FE262E811A646CE7516F838D5, xmp.iid:8561EDDE4B6DE811A8BAF55999F5C07B, xmp.iid:3F4AF92AE56DE811B42A80A85A8C60A6, xmp.iid:07C34C0BDC6EE81199DBFEC38526A30A, xmp.iid:D6B702DBE76EE81199DBFEC38526A30A, xmp.iid:182F17F6EA6EE81199DBFEC38526A30A, xmp.iid:3DAB7E74866FE811A608D428FD7308E0, xmp.iid:190E8A66896FE811A608D428FD7308E0, xmp.iid:D9442288896FE811A608D428FD7308E0, xmp.iid:1B3BD1A25874E811AC15EB22B289A044, xmp.iid:520D56BE5D74E811AC15EB22B289A044, xmp.iid:2A980F7D6974E811AC15EB22B289A044, xmp.iid:45A7077F6C74E811AC15EB22B289A044, xmp.iid:CA0D0DEBF574E8118697A106FA4283AD, xmp.iid:C2AE20E40B84E811B91FD732269026E2, xmp.iid:E00965480E84E811B91FD732269026E2, xmp.iid:FB7A68560E84E811B91FD732269026E2, xmp.iid:6B0639B30E84E811B91FD732269026E2, xmp.iid:848F231AD584E811B0A5DDEFA622A282, xmp.iid:1E4830367885E81191F3C20C4AF0D616, xmp.iid:DA818C177D85E81191F3C20C4AF0D616, xmp.iid:24F271077E85E81191F3C20C4AF0D616, xmp.iid:82535B757E85E81191F3C20C4AF0D616, xmp.iid:E08546FD7E85E81191F3C20C4AF0D616, xmp.iid:D02328127F85E81191F3C20C4AF0D616, xmp.iid:DC344C637F85E81191F3C20C4AF0D616, xmp.iid:9F65FD6B7F85E81191F3C20C4AF0D616, xmp.iid:EB33718A8585E81191F3C20C4AF0D616, xmp.iid:568B044E6786E811A705CB56F20B739C, xmp.iid:7A54E9076A86E811A705CB56F20B739C, xmp.iid:F20246836A86E811A705CB56F20B739C, xmp.iid:BB617AD46A86E811A705CB56F20B739C, xmp.iid:D2A85C6A6B86E811A705CB56F20B739C, xmp.iid:FD5B600D6C86E811A705CB56F20B739C, xmp.iid:655F76436D86E811A705CB56F20B739C, xmp.iid:8AAA62926D86E811A705CB56F20B739C History When : 2018:05:14 11:12:29+08:00, 2018:05:14 11:12:29+08:00, 2018:05:14 11:12:49+08:00, 2018:05:14 11:12:49+08:00, 2018:05:14 11:15:35+08:00, 2018:05:14 11:31:34+08:00, 2018:05:14 11:45:23+08:00, 2018:05:14 12:44:54+08:00, 2018:05:14 12:45:28+08:00, 2018:05:17 09:27:15+08:00, 2018:05:17 09:37:59+08:00, 2018:05:17 09:41:25+08:00, 2018:05:17 10:12:47+08:00, 2018:05:17 10:13:32+08:00, 2018:05:17 10:14:44+08:00, 2018:05:17 10:46:35+08:00, 2018:05:17 11:00:48+08:00, 2018:05:17 11:10:33+08:00, 2018:05:17 18:00:11+08:00, 2018:05:18 11:05:42+08:00, 2018:05:18 11:26:51+08:00, 2018:05:18 11:31:33+08:00, 2018:05:18 11:57:11+08:00, 2018:05:18 11:59:46+08:00, 2018:05:18 15:19:31+08:00, 2018:05:18 16:35:18+08:00, 2018:05:18 17:50:27+08:00, 2018:05:23 10:23:23+08:00, 2018:05:24 17:58:37+08:00, 2018:05:28 11:03+08:00, 2018:05:28 11:06:11+08:00, 2018:05:28 17:51:20+08:00, 2018:05:29 09:50:12+08:00, 2018:06:11 15:48:46+08:00, 2018:06:12 10:06:07+08:00, 2018:06:13 15:33:19+08:00, 2018:06:13 16:57:52+08:00, 2018:06:13 17:20:38+08:00, 2018:06:14 11:53:10+08:00, 2018:06:14 12:14:15+08:00, 2018:06:14 12:15:11+08:00, 2018:06:20 15:07:47+08:00, 2018:06:20 15:44:20+08:00, 2018:06:20 17:08:25+08:00, 2018:06:20 17:29:57+08:00, 2018:06:21 09:53:39+08:00, 2018:07:10 14:38:44+08:00, 2018:07:10 14:55:51+08:00, 2018:07:10 14:56:14+08:00, 2018:07:10 14:58:50+08:00, 2018:07:11 14:39:03+08:00, 2018:07:12 10:41:34+08:00, 2018:07:12 10:41:34+08:00, 2018:07:12 10:48:17+08:00, 2018:07:12 10:51:21+08:00, 2018:07:12 10:55:09+08:00, 2018:07:12 10:55:44+08:00, 2018:07:12 10:58+08:00, 2018:07:12 10:58:15+08:00, 2018:07:12 11:42:03+08:00, 2018:07:13 14:38:08+08:00, 2018:07:13 14:57:39+08:00, 2018:07:13 15:01:06+08:00, 2018:07:13 15:03:22+08:00, 2018:07:13 15:07:33+08:00, 2018:07:13 15:12:07+08:00, 2018:07:13 15:20:47+08:00, 2018:07:13 15:23+08:00 History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /;/metadata, /metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Create Date : 2018:07:13 16:16:10+08:00 Modify Date : 2018:08:02 14:00:42+08:00 Metadata Date : 2018:08:02 14:00:42+08:00 Creator Tool : Adobe InDesign CS5 (7.0) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 4380 bytes, use -b option to extract), (Binary data 10757 bytes, use -b option to extract) Doc Change Count : 1234 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 47 Creator : Adobe InDesign CS5 (7.0)EXIF Metadata provided by EXIF.tools