Alco Electronics RCS13101T Internet Music System User Manual

Alco Electronics Ltd Internet Music System

User Manual

1ACS3101Euser manual
2* SEE REAR OF UNIT FOR GRAPHIC SYMBOLS *The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock.The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this owner's manual.Safety InstructionsWARNINGS:•   TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE.•   TO AVOID ELECTRICAL SHOCK, DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.•   THE  APPARATUS  SHALL  NOT  BE  EXPOSED  TO  DRIPPING  OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUID, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.FCC StatementsNOTE: This  equipment  has  been  tested  and  found  to comply  with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:–  Reorient or relocate the receiving antenna.–  Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.–  Consult the dealer or an experienced radio/TV technician for help.WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.FCC RF Radiation Exposure StatementCaution:  To  maintain  compliance  with  the  FCC’s  RF  exposure guidelines,  place  the  Internet  Music  System  at  least  20cm  from nearby persons.Service InformationThis product should be serviced only by those specially trained in appropriate servicing techniques. For instructions on how to obtain service, refer to the warranty included in this guide.CAN ICES-3 (B)/ NMB-3(B)This product contains a low power laser device.Warnings:•   The  AC  power  plug  is  used  as  disconnect  device  and  it  should remain readily operable during intended used. In order to disconnect the apparatus from the mains completely, the AC power plug should be disconnected from the mains socket outlet completely.•   The mains plug of apparatus should not be obstructed OR should be easily accessed during intended use.•   Minimum  10  cm  (4  inches)  distances  around  the  apparatus  for sufficient ventilations.•   The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains, etc.•   No naked ame sources such as lighted candles should be placed on the apparatus.On SafetyAs the laser beam used in this compact disc player could be harmful to the eyes, do not attempt to disassemble the casing. Refer servicing to qualified personnel only.•   Do not put any foreign objects in the disc compartment. If you do so, the laser beam interlock may be defeated allowing the laser to remain on when the lid is opened.•   Should  any  objects  or  liquids  fall  into  the  unit,  disconnect  the power supply and have the unit checked by qualified personnel before any further operation.On OperationSince the CD system oers a wide dynamic range, the peaks of the high level inputs are recorded with high fidelity, and the noise level is very  low. Do not turn up the  volume while  listening  to  a  part of the disc with no audio signals or very low level inputs. If you do so, the speakers may be damaged when the peak level of the sound is played. The lens of the laser should be kept clean. Do not touch the lens. If you do so, the lens may be damaged and the unit will not operate correctly.On UseNever use the unit where it would be subject to:-   Heat sources such as radiators or air ducts.-   Direct sunlight.-   Excessive dust.-   Moisture or rain.-   Mechanical vibration or shock.-   Uneven surface.•   Do not place any heavy objects on top of the unit.•   When the unit is used with an AC power plug, do not wrap the unit in a cloth, blanket, etc. If you do so, the temperature inside and outside the unit may rise considerably, resulting in malfunctioning of the unit.•   If the unit is brought directly from a cold to a warm location, or is placed in a very damp room, the moisture may condense on the lens inside the unit. Should this occur, the unit will not operate. In this case, remove the disc and leave the unit in a warm place for several hours until the moisture evaporates.•   For  the  unit  to  operate  at  its  best,  it  should  not  be  subject  to temperatures below 41°F (5°C) or above 95°F (35°C).Additional safety information•   Apparatus shall not be  exposed  to  dripping or  splashing and  no objects  lled  with  liquids,  such  as  vases,  shall  be  placed  on  the apparatus.•   Always leave sucient space around the  product  for ventilation. Do not place product in or on a bed, rug, in a bookcase or cabinet that may prevent air flow through vent openings.•   Do not place lighted candles, cigarettes, cigars, etc. on the product.•   Connect power plug  only  to AC  power  source  as  marked on the product.•   Care should be taken so that objects do not fall into the product.•   Do not attempt to disassemble the cabinet. This product does not contain customer serviceable components.Double insulation when servicing  use only identical replacement parts.ACS3101EEquipment tested forcompliance as acomplete unit
3System connectionsRemote ControlBattery ReplacementWhen the battery becomes weak, the operating distance of the remote control will be greatly reduced and you will need to replace the battery.Note: If the remote control is not going to be used for a long time, remove the battery.WARNING: •   Do not dispose of the battery in a re or it may leak and/or explode.•   Batteries  should  not  be  exposed  to  excessive  heat  such  as sunshine, fire or the like.CAUTION: Danger of explosion  if  battery  is incorrectly  replaced. Replace  only with the same or equivalent type.Using the Remote Control•  Point the remote control at the  REMOTE  SENSOR  located on the unit.•  When  using  this  unit  in  very  bright  light,  the  infrared  REMOTE SENSOR may not work properly.To Change Remote Battery1.  Open the battery door. 2.  Insert 2 AAA size batteries.1.  Read these instructions. 2.  Keep these instructions. 3.  Heed all warnings. 4.  Follow all instructions. 5.  Do not use this apparatus near water.6.  Clean only with a dry cloth.7.  Do not block the ventilation openings. Install in accordance with the manufacturer's instructions.8.  Do  not  install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9.  Do not defeat  the  safety  purpose of a polarized or  grounding  - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10. Protect the power cord from  being  walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11. Only use attachments/accessories specified by the manufacturer.12. Use only with a cart, stand, tripod, bracket,  or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13. Unplug this apparatus during lightning storms or when unused for long periods of time.14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the AC power cord or plug is damaged, liquid has spilled or objects have fallen into the  apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.IMPORTANT SAFETY INSTRUCTIONSPrecautions•   This compact disc player uses a laser to read the music on the disc. The laser mechanism corresponds to the cartridge and stylus of a record player. Although this product incorporates a laser pick-up lens, it is completely safe when operated according to directions.•   Discs rotate at high speed inside the player. Do not use damaged, warped, or cracked discs.•   Do  not  touch  the  pick-up  lens  which  is  located  inside  the  disc compartment. To keep dust from collecting on the pick-up lens, do not leave the compartment door open for an extended period of time. If the lens becomes dirty, clean it with a soft brush, or use an air blower brush designed for camera lenses.Headset safety•  Have a Blast-Just Not in your eardrums! Make sure you turn down the volume on the unit before you put on headphones. Increase the volume to the desired level only after headphone are in place.•   Do  not  play your headset at  high  volume. Hearing experts  warn against extended high-volume play.•   If  you  experience  ringing  in  your  ears,  reduce  volume  or discontinue use.•   You should  use  with  extreme caution  or  temporarily discontinue use in potentially hazardous situations. Even if your headset is an open-air designed to let you to hear outside sounds, do not turn up the volume so high that you are unable to hear what is around you.•   Excessive  sound  pressure  from  earphones  and  headphone  can cause hearing loss.Safety InstructionsPortable Cart Warning Connect the speakers to the  R  (R+,  R-) terminals  and  the L  (L+,  L-) terminals.Note:Connecting speakers other thanthe speakers supplied with the unit may damage the unit.CAUTIONS: •   Ensure  that the  power  supply  in your  house  complies  with that indicated on the identification sticker located on the back of your unit (AC 120V ~ 60Hz).•   If you are not going to use the unit for a long time, disconnect the AC power plug from the wall outlet.•   This  unit  is  designed  for  continuous  use.  Switching  o  the  unit to standby mode does not disconnect it from the power supply. To completely isolate the equipment, remove the plug from the power outlet as some components remain connected to the electrical supply.Right LeftSilver cord (+)Silver (Line dot) cord (-)EN
4Unit1.     STANDBY button    Press to standby the unit.  Press and hold to shut down the unit.2.    (RETURN) button3.    Cursor ( , ,  ,  ) buttons     Move between selections on a menu screen and adjust certain settings.  OK button     Confirm selections on a menu screen.4.    INTERNET button    Press to return to Internet mode.5.    CD button    Press to return to CD mode.6.    PREV button    Move back through tracks on the disc.     Press to tune the FM frequencey.    PLAY/ PAUSE button    Start or resume playback of a disc.    Press once to  pause  playback.  Press subsequently to advance frame by frame on a CD.    NEXT button    Skip to next track on a disc.    Press to tune the FM frequencey.7.  GALLERY button    Press to return to Gallery folder.8.  PLAY MUSIC button    Press to select the Play Music mode.9.    REPEAT button    Press to repeat the desired songs when playing CD.10.   RANDOM button    Press to random playing CD.11.   MUTE button 12.    (Home screen) button    Press to return to home screen page.13.    Bluetooth button    Press to select the Bluetooth mode.14.   LINE  IN button    Press to select the Line In mode.15.   FM button    Press to return to FM mode.16.    STOP button    Stop playing a disc.17.   VOL + / - buttons    Adjust the volume level.18.  SCREEN button    Press to switch screen on/off.19.   MEMORY button    Press to memory the radio station.20.   EQ button    Press to select the desired music mode (POP / CLASSIC / FLAT / JAZZ ).Control Reference GuideRemote Control12345678111214151618131720191091.     Screen    Micro SD Card Slot    Support up to 32G (Micro SD card not included)    Micro HDMI jack     Micro USB jack 2.    STANDBY/ON button     Press and hold to shut down the control panel.    Function button    button    button    Display     Remote Sensor    button   button    button3.    Master Volume knob4.    CD Door5.    Headphone jack     LINE IN jack   12345Please check and identify the supplied accessories.   Remote Control with 2 “AAA”batteries ..........................................x 1  HDMI converter cable ................................................................x 1  USB converter cable ...................................................................x 1Accessories
5First Time OperationTurning Your Unit On for the First Time When using the unit for the first time, you will be required to setup the following:  1.   Select the language, then tap Start.2.  Select the Wi-Fi.3.   If you have a Google account, select "Yes". Then tap a network name to see more details or connect to it, and enter a password if necessary.     When prompted, sign in using the email address and password for your Google Account. If you don’t have one yet, go ahead and create one. 4.   Follow the onscreen instructions to setup the unit.Basic OperationUsing the TouchscreenHere are some basic procedures for interacting with the touchscreen.Tap  To select an item on the touchscreen, lightly tap it. Press & Hold In some instances, touching the item and holding your finger on it will present other options or menus. Drag or Swipe While holding an item such as an icon, it can sometimes be moved by dragging it to another area or screen. You may also be able to swipe your finger across a screen or item to navigate or move it. Zoom By placing two fingers  on the screen, you can slide them apart to "Zoom In", or pinch them together to "Zoom Out". Using the Android System Download apps on Google PlayTMIn addition to the apps that are preloaded on the system, you can choose from hundreds of thousands of apps from the Google Play store.  Simply tap on the Play Store icon to find and download the apps you want.Customizing the Home Screen•   Moving Apps to the Home screen: Tap All Apps button to open All Apps  screen,  press & hold  an  icon or  widget and  slowly  to drag it to the location of your choice. •   Move apps or widgets: Press & hold an icon or widget, slowly to drag it to the screen edge, the screen will switch and you can release the app on the screen of your choice.•   Grouping apps: Press & hold an app icon and drag it on top of another app.  This will create a folder for these apps which can be renamed by tapping on the folder once and then tapping the folder’s name.  Additional apps can be dropped into the folder.•   Delete apps or widgets from the Home screen: Press & hold an icon or widget,  when  the "  X " icon appears at  the  left of the screen, drag the icon or widget into it.  This will remove the app or widget  from  the Home screen.   However,  the app won’t be deleted from the system.  It can still be found in the All Apps button.•   Modify your Wallpaper:    Press &  hold  an empty  space  on your Home screen, and choose your wallpaper from Gallery, Live Wallpapers or Wallpapers.Voice Search & Voice Actions  Turn Voice Search or Voice Action OnYou can initiate a Voice  Search or Voice Action by  tapping  the Microphone icon in the top right corner of the Home screen.When you’re viewing the Google Now screen, you don’t have to touch anything. Just say “Google.” Note: To detect  when you  say “Google”  to launch Voice  Search  or Voice  Actions, Google analyzes sound  picked  up  by  your  unit’s microphone in intervals of a few seconds or less. The sound is immediately discarded after analysis and is not stored on the device or sent to Google servers. Using Voice SearchAfter tapping the microphone icon, just say whatever it is you want Google to search for.Using Voice ActionsThere are many  actions  that the  unit  can perform  using  "Voice Actions". For example, you can  send  emails,  set  alarms,  play  a song, or  navigate to  a website. Just  tap  the Microphone icon, and say what you want the unit to do.  As you speak, Voice Search analyzes your speech and initiates the action.If Voice Search doesn’t understand  you,  it  lists a set of  possible meanings. Just tap the one you want.EN
6Notification & Status BarSome indicators that inform you about the status of your unit are shown at the top of the screen.Notification ShadeNotifications may come from the system, a game, an application such as E-mail, or the music player.When Notifications are available, related icons will appear in the top left corner of the screen. To open the Notification Shade, touch the Notification icon and swipe your finger down. Some notifications allow you to take specific actions by tapping icons within the notification.After you are finished with a notification, just slide it away to the left or right. If you want to dismiss all notifications, tap the Dismiss icon      at the top of the notification.Status Bar & Quick SettingsThe Status Bar in the top right corner shows various indicators, including Wi-Fi connectionand battery status. To access "Quick Settings", touch the status bar and swipe down. You can then adjust various settings on the tablet by touching the corresponding square.App IconsStatus BarNavigation ButtonsGoogle Search Notification Bar All AppsNavigating the Home ScreenThe below table lists are some of the frequently used icons in the Notification & Status bar:   Item                          DescriptionMessage  Received new message.Music  Play Music application is running.Screenshots  Screenshot captured.USB tethering  Has connected to a PC and the USB tethering is turned on.Wi-Fi  Has a Wi-Fi Internet connection. Play Store  An update for an app is available. Notication & Status IconsHome Screen IconsAll Apps Tap the All Apps icon   to enter the All Apps screen. In All Apps screen, you can: •  Move between screens: Slide left or right.•  Open an App: Tap its icon.•  Copy an App icon to the Home screen: Press & hold the icon or widget icon and slowly to drag it to the Home screen.•  View widgets: Tap the widgets tab at the top of a All Apps screen. Widgets are app information displays that can be placed on your Home screen.•  Get more apps: Tap the Google Play Store icon  , or the Shop icon  i at the upper right corner. •  View info about an App: Press & hold it, and drag it to the top of the screen, then drop the app over the App Info icon  .Tip: Most apps include a Menu icon   near the top or bottom of the screen that lets you control the app’s settings.Back Tap Back icon   to return to the previous screen.•   The Back icon remains on the bottom of the screen at all times, allowing you to navigate back to the previous screen.•   Once you go  back  to  the  Home screen, you can’t go back any further in your history.Home Tap Home icon   from anywhere on your unit to return to the Home screen. Recent Apps Tap Recent Apps icon   to view recently used apps. Tap an app to use it again. You can slide down to see more apps. You can also slide it away to the left or right.Insert a Micro SD cardTo increase the memory storage capacity, remove the rubber cover  on the  side of screen and  insert a Micro  SD  card (not included) into the unit’s Micro SD slot until it clicks. To remove a Micro SD card, push in on the edge of the card until it pops out of the card slot.Insert a Micro SD card
7ConnectionsMicro-USBConnect your unit to a PC or a USB storage device with a USB cable (not included) and USB converter cable (included) to transfer music, pictures and other files in both directions.Notes: •  To change your unit’s USB connection options, you should go to Settings > DEVICE > Storage, and tap Menu icon   at the upper right corner. Then tap USB computer connection to enter to setup.•   The unit can be connected to a keyboard, a mouse or other input devices via a USB cable and use it just as you would connect with a PC.Micro SDRemove the rubber cover on the side of screen and insert the micro SD card into the unit’s Micro SD slot until it clicks. To check the storage of the micro SD card, go to Settings > DEVICE > StorageRemove the micro SD  card by pushing in on the card's edge. The card will pop out and can be removed.Notes:•    You  can  use  microSDTM card and microSDHCTM card (up to 32GB, SD card not included). •    Never remove or insert micro SD card in On mode.Micro-HDMIConnect your unit to a TV or other display device with a HDMI cable (not included) and HDMI converter cable (included)  to  output  the video.Notes: •  To change your unit’s HDMI options, you should go to   Settings > HDMI >  to modify each setting. Wi-FiConnect to a Wi-Fi Network1.  Go to Settings > WIRELESS & NETWORKS > Wi-Fi, and slide the Wi-Fi switch to the ON position.2.  The device will scan Wi-Fi networks automatically and display the available names. •    If the device finds a network that you connected to previously, it will connect to it automatically.3.  Tap a network name to connect to it, and enter a password if necessary.4.   Alternatively, if your Wi-Fi router supports Wi-Fi Protected Setup, tap the WPS icon   at the top of the screen, and then press the WPS button on your router.5.   If your network does not broadcast its SSID, tap the  Plus icon + at the top of the screen, and enter the Network SSID (name) of the network. If necessary, enter security or other network configuration details.VPN (Virtual Private Network)You can create virtual  private network  (VPN)  and  connect to your private network securely through a public network, such as the internet. You must set a lock screen PIN or password before you can use credential storage. Add VPN network and follow the instructions on the screen.HDMI, the HDMI logo and  High-Definition Multimedia  Interface  are trademarks  or registered trademarks of HDMI Licensing, LLC. Note:    you can tap Menu icon   at the upper right corner in the Settings screen for advanced settings.SettingsWIRELESS & NETWORKSWi-FiBluetoothMore...DEVICEScreenshotSettingStorageBatteryHdmiSoundDisplay6:14ONOFFCoffeeShopWFWPS availableMyHomeWFConnectedENHDMI Converter Cable (included)USB Converter Cable (included)TVHDMI INHighDefinitionTVHDMI Cable (not included)Control Panel
8Connect a Bluetooth® device to the Main UnitTo Adjust the VolumeThe volume can be adjusted using the Master Volume Knob on the main unit, or the Volume Up/Down Buttons on the remote control.For Personal ListeningConnect  headphones (Ø3.5mm  stereo  mini  plug)  to the  earphone jack. Adjust the VOLUME levels to obtain the desired volume.When headphones are connected, the speakers are automatically muted.Warning: Excessive sound pressure from earphones and headphones can cause hearing loss.Listen to the Radio1. Press the   button to turn the unit on.2. Press the   button to FM mode.3. Press the    or   button to tune in to a station.4. Adjust the volume levels.Searching for a Station Automatically•   Press and hold the   or   button until the tuner starts searching for a station, then release. After tuning in a station, the search stops.•   The search may not stop at a station with a very weak signal.Presetting StationsThe unit can store a total of 20 stations in memory. Presetting allows you to tune in to a station directly.1.   Tune in to a desired station.2.   Press and hold the MEMORY button. The preset number will blink and the “PXX” indicator will be shown on the display.3.  Press the    or   button to select the preset number.4.  Press the MEMORY button again to store it in memory.5.   Repeat steps 1-4 to store other stations.Tuning into a Preset StationPress    PLAY/PAUSE button on the unit or press   or   button on the remote control to select a preset number.For Better receptionFM:  Fully  unwind  the  antenna  wire.  Extend  the  antenna  wire  and place it in the position that sounds best.Note: Do not connect the FM antenna to an outside antenna.Volume AdjustmentThis system supports a variety of equalizers and sound effects.During  playback,  press  the  EQ button to select a desired music mode. Each time the EQ button is pressed, the music mode will be changed to the next one as follows: POP / CLASSIC / FLAT / JAZZPreset EQ You can connect audio devices such as your iPod, CD players or MP3 players to the unit via the LINE IN jack. To do this, connect an audio cable  from  the  line  out  or  headphone  out  jack  of the  other audio device to the LINE IN jack on the unit’s front panel.Listening to the Connected Device1.  Press the   button to LINE IN mode and “ L-in ” is shown on the display.2.  Turn on the audio device you’ve attached to the LINE IN jack.Line-In Playback1.   Press the   button to turn on the unit.2.   Press the   button to CD mode.3.   Press the   button to open the CD door. Place a disc in the center with the label side up and then press the   button again to close the CD door. Then, it plays automatically.•   Adjust the volume levels.To Pause Playback•   Press the   button.•   To resume playback, press the   button again.To Stop Playback•   Press the   button.Skipping to Another Track•   Press  either  the   or   button according to the desired direction.•  Press the   button to skip to the start of the current track or skip to previous tracks. Press the   button to skip to the beginning of the next track.Locating a Particular Point on a Track•   Keep  either  the   or   button pressed during playback, according to the desired direction, and release at the desired point.CD PlaybackSettingsWIRELESS & NETWORKSWi-FiBluetoothMore...DEVICEScreenshotSettingStorageBatterySEARCH FOR DEVICESHdmiSoundDisplay6:14ONRCA RCS13101ERCS13101TNot visible to other Bluetooth deviceAVAILABLE DEVICESONThe system can wirelessly receive and playback audio from a Bluetooth-equipped smartphone, tablet, or computer.1.  Go to Settings > WIRELESS & NETWORKS > BLUETOOTH, and slide the Bluetooth® switch to the ON position.2.  Turn on the Bluetooth® device you wish to pair and connect.  3.  On your Bluetooth® enabled  device,  search  for  the “RCA RCS13101E" in the list of discovered devices and select it.Note:   If your Bluetooth® device (e.g. Smart phone etc.) need the PIN code while pairing, please enter 4-digit number: 0000.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
9Repeat the current track•   Press the  REPEAT button until “ rP1 ” blinks on the display. The current track will be played repeatedly.Repeat the Entire CD•   Press the REPEAT  button until “  rPA ” stops blinking and remains on. All tracks will be played repeatedly.Cancel Playback Mode•   Press  the  REPEAT  button to cancel the playing until “ OFF  ” appears.Random PlaybackRandom Playback•   Press the RANDOM button on the remote control and “ rdn ” will be shown on the display. All tracks will be played randomly. After all tracks have played, the unit will stop automatically.Cancel Random Playback•   Press the  RANDOM button on the remote control again during RANDOM playback to return to normal playback and “ OFF ” will be shown on the display. Repeat Playback Troubleshooting GuideNo power.•  System does not turn on.•  Make sure AC power plug is secure in the outlet, and outlet has power.The remote control does not function.•   Make sure the infrared remote sensor is not blocked.•  Point the remote directly  at  the  infrared remote sensor on the unit.•  Replace the battery in the remote control with a new one.Poor FM reception.•   Make sure FM antenna wire is fully extended.•   Electrical interference in your home  can  cause  poor  reception. Move the unit away from them (especially those with motors and transformers).The CD Disc does not play.•   Make sure you’ve selected CD mode.•   Make sure disc label is facing up.•   Make sure disc is clean.•   Pause mode is activated.•   Disc may be damaged or dirty; check disc.Severe hum or noise is heard.•  The plugs and jacks are  dirty. Wipe them with a cloth slightly moistened with alcohol.•  Clean the disc.Cleaning the DiscA defective or soiled disc inserted into the unit can cause sound to drop out during playback.Handle the disc by holding its inner and outer edges.•  Do NOT touch the surface of the unlabeled side of the disc.•  Do NOT stick paper or tape on the surface.•  Do NOT expose the disc to direct sunlight or excessive heat.•   Clean the disc before playback. Wipe the disc from the center outward with a cleaning cloth.•  NEVER use solvents such as benzine or alcohol to clean the disc.•  Do NOT use irregular shaped discs (example: heart shaped, octagonal, etc.). They may cause malfunctions.Cleaning the Unit•  Be sure to turn the unit off and disconnect the AC power adapter before cleaning the unit.•  Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth that has been dipped in a weak soap-and-water solution and wrung out thoroughly, then wipe with a dry cloth.•  Never use alcohol,  benzine, thinner, cleaning  fluid  or other chemicals. Do NOT use compressed air to remove dust.Important Note•  Before transporting the unit, remove  the disc from the disc compartment.MaintenanceEN

Navigation menu