Alco Electronics RS2929B CD Music System User Manual

Alco Electronics Ltd CD Music System

User Manual

User ManualRS2929BCD Music SystemIt’s important to read this User Manual prior to using your new product for the rst time.FCC InformationThis device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorientorrelocatethereceivingantenna.• Increasetheseparationbetweentheequipmentandreceiver.• Connecttheequipmentintoanoutletonacircuitdierentfromthattowhichthereceiveris connected.• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.WARNING:Changesormodicationsnotexpresslyapprovedbythepartyresponsibleforcompliance could void the user’s authority to operate the equipment. For Customers in CanadaThis apparatus complies with the Class B limits for radio noise emission set out in radio interference regulations.CANICES-3(B)/NMB-3(B)Warning: • TheACadapterisusedasdisconnectdeviceanditshouldremainreadilyoperableduringintended used. In order to disconnect the unit from the mains completely, the AC adapter should be disconnected from the mains socket outlet completely.• The AC adapter of unit should not be obstructed OR should be easily accessed duringintended use.• Minimum10cm(4inches)distancesaroundtheunitforsucientventilations.• Theventilationshouldnotbeimpededbycoveringtheventilationopeningswithitemssuch as newspaper, table-cloths, curtains, etc.• Nonakedamesourcessuchaslightedcandlesshouldbeplacedontheunit.On Safety• Shouldanyobjectsorliquidsfallintotheunit,disconnectthepowersupplyandhavetheunit checked by qualied personnel before any further operation.• Theunitshallnotbeexposedtodrippingorsplashingandthatnoobjectslledwithliquid,such as vases, shall be placed on the unit.SAFETY PRECAUTIONS LOCATION OF CONTROLSREMOTE CONTROL SYSTEM CONNECTIONS LINE IN CONNECTIONCHARGE YOUR SMARTPHONE/TABLETCLOCK SETTING1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Followallinstructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.10. Protectthepowerplugfrombeingwalkedonorpinchedparticularlyatplugs,conveniencereceptacles,andthepointwheretheyexitfromtheapparatus.11. Onlyuseattachments/accessoriesspeciedbythemanufacturer.12. Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution whenmovingthecart/apparatuscombinationtoavoidinjuryfromtip-over.13. Unplug this apparatus during lightening storms or when unused for a long period of time.14. Referallservicingtoqualiedservicepersonnel.Servicingisrequiredwhenthe apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has spilled or objects have fallen into the apparatus, theapparatushasbeenexposedtorainormoisture,doesnotoperatenormally,orhasbeen dropped.IMPORTANT SAFETY INSTRUCTIONSPortable Cart WarningWARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE.TO AVOID ELECTRICAL SHOCK, DO NOT OPEN THE CABINET.REFER SERVICING TO QUALIFIED PERSONNEL ONLY.This product contains a low power laser device.1. DISPLAY2. FUNCTION button 3. STANDBY/ON button4. / / TUNE – / + button5. PROG/MEM button6. PAIR button7. Bluetooth® indicator8. CD Door9. Timer indicator10. VOLUME button11. STOP button12. Line in jack13. PLAY/PAUSE button14. USB port (for charging only)15. Remote sensor1. STANDBY/ON button2. SLEEP button3. /PROG/MEM button4. RANDOM button5. /MEM.UP button6. STOP button7. PRESET EQ button8. TIMER button9. FUNCTION button10. PAIR button11. / / TUNE – / + button12. VOLUME +/– buttons 13. PLAY/PAUSE buttonUSING THE REMOTE CONTROL CORRECTLY• PointtheremotecontrolattheREMOTESENSORlocatedontheunit.• Whenthereisastrongambientlightsource,theperformanceoftheinfraredREMOTESENSOR may be degraded, causing unreliable operation.•Therecommendedeectivedistanceforremoteoperationisabout19feet(6meters).TO CHANGE REMOTE BATTERY1. Open the battery door.789101112131234562.InsertoneCR2025(3V)sizebattery.ATTENTIONTake out the plastic sheet before operating the remote control.BATTERY REPLACEMENTWhen the battery becomes weak, the operating distance of the remote control is greatly reduced and you will need to replace it.NOTE : If the remote control is not going to be used for a long time, remove the battery to avoid damage caused by battery leakage corrosion.WARNING :Donotdisposeofbatteryinre;batterymayexplodeorleak.CAUTION :Dangerofexplosionif battery is incorrectlyreplaced.Replaceonlywith the same or equivalent type.SPEAKER CONNECTIONSConnect the right speaker to the R terminal and the left speaker to the L terminal.NOTE : Connecting speakers other than the speakers supplied with the unit may damage the unit.Setting the clock can only be done in STANDBY mode.• IftheunitispluggedinwiththesuppliedACadapterandtheunitisinstandbymode.1. Press and hold the /PROG/MEM button until the hour digits blink.2. Press the / button to adjust the desired hours and press the /PROG/MEM button once to conrm, then the minute digits blink.3. Press the / button to adjust the desired minutes and press the /PROG/MEM button once to start clock.12:00PM=NOONtime,and“PM”appears.USING THE AC ADAPTERUsing an AC adapter other than the one supplied with the unit may damage the unit.ThisACadapteroperatesonAC100-240V~50/60Hz.CAUTIONS:• Beforeuse,ensuretheratedvoltageoftheadaptermatchesyourlocalvoltage.• TheincludedACadapterisforusewiththisunitonly.Donotuseitwithotherequipment.• Ifyouarenotgoingtousetheunitforalongtime,disconnecttheACadapterfrom the wall outlet.• WhenevertheACadapterispluggedintoawalloutlet,electricityisrunningthrough the unit, even when the power switch is turned o.On UseNever use the unit where it would be subject to:- Heat sources such as radiators or air ducts.- Direct sunlight.LISTENING TO THE RADIO1. Press the STANDBY/ON button to turn the unit on.2. Press the FUNCTION button to switch to TUNER mode.3. Press the / button to tune in to a station.• Adjustthevolume.Searching for a Station Automatically• Press and hold the  / button until the tuner starts searching for a station, then release. After tuning in a station, the search stops.• Thesearchmaynotstopatastationwithaveryweaksignal.Presetting StationsTheunitcanstoreatotalof10stationsinmemory.Presettingallowsyoutotunein to a station directly.1. Tune in to a desired station.2. Press the /PROG/MEMbutton.Thepresetnumberwillblinkandthe“MEM”indicator will be shown on the display.3. Press the /MEM.UP button to select the preset number.4. PressthePROG/MEM button again to store it in memory.5. Repeatsteps1-4tostoreotherstations.Tuning in to a Preset StationPress the /MEM.UP button to select a preset number.For Better ReceptionFully unwind the antenna wire. Extend the antenna wire and place it in theposition that sounds best.Note: Do not connect the FM antenna to an outside antenna. Whenthereceptionisgood,the“ ”iconwillappearonthedisplay.After listening to the radio, press the STANDBY/ON button to turn the unit o.CONNECTING TO LINE IN FOR OTHER SOUND SOURCESYou can connect audio devices such as your CD player or MP3 player to the unit via the LINE IN jack. To do this, connect an audio cable from the line out or headphone out jack of the other audio device to the LINE IN jack on the rear of unit. Press the FUNCTION button to switch to AUX mode. Note: We recommend you unplug the device from the LINE IN jack when not in use.You can charge your smartphone/tablet through the USB socket with a USBcable (not supplied).• ConnectaUSBcable(notsupplied)totheUSBsocketonthefrontoftheunitand the dock connector on your smartphone/tablet.RIGHTSPEAKERBOXLEFTSPEAKERBOX AC adapterTo AC outlet
CD PLAYBACK RANDOM PLAYBACKPRESET EQSLEEP TIMER SETTINGTROUBLESHOOTING GUIDETIMER SETTINGPROGRAMMABLE CD PLAYBACKREPEAT PLAYBACK1. Press the STANDBY/ON button to turn the unit on.2. Press the OPEN knob to open the CD door. Place a disc in the center with the label side up and then close the CD door gently.3. Press the FUNCTIONbuttontoCDmodeand“--”isshownonthedisplay.Then the total track no. is shown on the display.4. Pressthe PLAY/PAUSE button to start playing.• Adjustthevolume.To Pause Playback• Pressthe PLAY/PAUSE button.• Toresumeplayback,pressthe PLAY/PAUSE button again.To Stop Playback• Pressthe STOP button.Skipping to Another Track• Presseitherthe or button according to the desired direction. Press the button to skip to the start of the current track or skip to previous tracks. Press the buttontoskiptothebeginningofthenexttrack.Locating a Particular Point on a Track• Keepeithertheorbuttonpressedduringplayback,accordingtothedesireddirection, and release at the desired point.All tracks on the disc can be played in random order (Using the remote control only).Random Playback• PresstheRANDOMbuttonontheremotecontroluntil“ ”appearsonthedisplay. All tracks will be played randomly. After all tracks have played, the unit will stop automatically.Cancel Random Playback• Pressthe RANDOMbuttonontheremotecontroluntil“ ”disappears.Theunit will return to normal playback.This system supports a variety of equalizers and sound eects.During playback, press the PRESET EQ button to select a desired music mode. Each time the PRESET EQ button is pressed, the music mode will be changed to thenextoneasfollows:The sleep timer automatically turns the unit o at a certain time.1. While the unit is on, press the SLEEPbuttonontheremotecontroland“00”appears on the display.2. Press the SLEEP button repeatedly to select the desired sleep time as below:3. Aftersettingadesiredsleeptime,the“ “appearsonthedisplay.4. Theunitwillautomaticallyturnoonceitreachesthesleeptime.• ToclearthepresetsleeptimepresstheSLEEP button on the remote control to select“ “andthe“ “disappearsonthedisplay.The timer function will turn the unit on at a preset time.TO SET TIMER1. In standby mode, press and hold the TIMER button on the remote control until the TIMER indicator blinks.2. Press the / button to adjust the desired hours and press the TIMER button once to conrm, then the minute digits blink.3. Press the / button to adjust the desired minutes and press the TIMER button once to conrm, then the TUNER indicator blinks.4.Pressthe / buttontochoosetheunitwillwakeupto“CD”or“RADIO”when the timer reaches the preset time, then press the TIMER button once to conrm. 5. Press the / button to adjust the volume, then press the TIMER button oncetoconrm.The“TIMER”indicatorstopsblinkingandremainson.• ForRADIOalarm,rsttuneintoadesiredstation.• ForCDalarm,rstpresstheCDbuttontoCDmodeandinsertoneCDintotheunit.TO CANCEL TIMER• PresstheTIMERbuttonontheremotecontroltwiceandthe“TIMER”indicatorgoes out.Aprogramofupto20trackscanbesettoplayinapresetorder.1. In CD stop mode, press the /PROG/MEMbuttonandthe“MEM”&“ ”will blink on the display.2. Press the or button to select the desired track and press the /PROG/MEM button to store the track in memory.3.Toaddadditionaltracks,repeatstep2(upto20tracks).4.Tostartplayback,pressthe PLAY/PAUSE button.To check the program:• Press the PLAY/PAUSE button and the button. Each time the button is pressed, the track number appears on the display.To change the programmed tracks during program playback:• Press the STOP button and press the PROG/MEM button repeatedly to search the program number, then press either the or button to select the desired track. Press the /PROG/MEM button again to register the newly selected track into program.To erase the whole program, do one of the following:• Pressthe FUNCTION button to the other mode.• Pressthe STOP button and open the CD door.Repeat Current Track• Pressthe /MEM.UPbuttonuntil“ ”blinksonthedisplay.Thecurrenttrack will be played repeatedly.Repeat the Entire CD• Pressthe /MEM.UPbuttonuntil“ ”stopsblinkingandremainson.Alltracks will be played repeatedly.Cancel Playback Mode• Pressthe /MEM.UPbuttonuntil“ ”disappears.The unit can be paired and connected to the Bluetooth® enabled devices such as a smart phone. Note : You must disconnect the LINE IN cable and device from the unit when you are ready to pair and connect your Bluetooth® device.PLAYBACK VIA BLUETOOTH® ENABLED DEVICES PLAYBACK VIA BLUETOOTH® ENABLED DEVICESINITIAL DEVICE PAIRING AND CONNECTION In order to pair and connect your Bluetooth® device for the rst time:1. Press the STANDBY/ON button to turn on the unit. Press the FUNCTION buttontoBluemodeand“ ”isshownonthedisplay. The Bluetooth®indicatorlightglowsblueandasheswhichmeanstheunitisin Bluetooth® mode and ready to pair.2. Turn on the Bluetooth® device you wish to pair and connect.3. Press and hold the PAIR button on the unit for 3 seconds. The Bluetooth® indicatorlightwillstartashingrapidlywhichmeansitispairing.4. On your Bluetooth® enabled device, search for the “RS2929B” in the list ofdiscovered devices and select it. It may take the unit and Bluetooth® enabled device a few seconds to pair.5. When the Bluetooth® indicator glows a solid blue, the unit and the Bluetooth® enabled device are now paired and connected. 6. You can now enjoy audio from the unit.Notes: • If your Bluetooth device (e.g. Smart phone etc.) need the PIN code whilepairing,pleaseenter4-digitnumber:0000.• TheunitcanonlybeconnectedtooneBluetooth®deviceatatime.RECONNECTING A BLUETOOTH® ENABLED DEVICEBluetooth® enabled devices must be reconnected when the device has been turned o or the unit has been turned o.1. Turn on the Bluetooth® device that has already been paired with the unit.2. Press the STANDBY/ON button to turn on the unit. Press the FUNCTION buttontoBluemodeand“ ”isshownonthedisplay. The Bluetooth® indicator light glows blue and starts ashing rapidly, and itauto searches for the last paired Bluetooth® device in memory.3. Depending on your Bluetooth® device, your device may automatically connect to the unit. If the device does not automatically connect to the unit, press and hold the PAIR AND CONNECT WITH ANOTHER NEW DEVICEIn order to pair the unit to a new device, you must rst disconnect the currently paired and connected Bluetooth® device from the unit. 1. OnthecurrentlypairedandconnectedBluetooth®device,selectthe“RS2929B”from the list of currently paired and connected devices, and disconnect it. Please refer to your Bluetooth® enabled device User’s Guide for direction on how to disconnect a device. Or turn o the Bluetooth® device.2. Follow the Initial device pairing and connection instructions above.PAIR button on the unit for 3 seconds until the Bluetooth® indicator light starts ashing rapidly, then search for the “RS2929B” in its list of your Bluetooth®devices and select it.4. Once the Bluetooth® indicator turns a solid blue, the Bluetooth® enableddevice is paired and connected.5. You can now enjoy audio from the unit.SOLUTIONS•MakesureyourBluetooth® device is working properly.• MakesurethesourceisBluetooth® mode.• Checkyourdevice’smanualfordetailsonBluetooth® pairing and linking.•MakesureCDbuttonispressed.•Makesuredisclabelisfacingup.•Makesurediscisclean.•Pausemodeisactivated.•Discmaybedamagedordirty;checkdisc.•Makesuretheunitisonasecurespot.Vibrationor jarring can cause the disc to skip.•MakesureFMantennawireisfullyextended.•Electricalinterference inyourhomecancausepoor reception. Move the unit away from them (especially those with motors and transformers).• Rotatetheunithorizontally.•MakesureACadapterissecureintheoutlet,and outlet has power.• Makesurethecurrentmodeiscorrect.• Makesureyou’veturnedontheconnecteddevice, and music are being played back.• Checkifvolumeissettozero.PROBLEMSBLUETOOTH®Bluetooth® devices doesn’t pair with this unit. CDDisc in place but unit won’t playDisc skipsRADIOPoor FM receptionOTHERS System does not turn on No soundDesign and specications are subject to change without notice.AVC MULTIMEDIA (“AVC”) makes the following limited warranty. This limited warrantyextendstotheoriginal consumer purchaser and is limited tonon-commercial use of the product.One Year Parts & Labor WarrantyAVC products purchased in the United States are warranted to be free from defects in materials or workmanship for a period of one year from the date of their original retail purchase. If the unit fails to conform to this warranty, we will service the product using new or refurbished parts and products, at AVC’s sole discretion.During a period of one year from the eective warranty date, AVC will provide, when needed, service labor to repair a manufacturing defect at its designated Service Center. To obtain warranty service in the United States, you must rst call our Customer Support Center at 1-800-506-5746 or 1-877-252-6873, during the hours listed in the box below. The determination of service will be made by AVC Customer Support. PLEASE DO NOT RETURN YOUR UNIT TO AVC WITHOUT PRIOR AUTHORIZATION. New or remanufactured replacements for defective parts or products will be used for repairs by AVC at its designated Service Center for one year from the eective warranty date. Such replacement parts or products are warranted for an additional one year from the date of repair or replacement. The Customer will be required to ship the unit to the Service Center indicated at the time Customer Support is contacted to make the necessary repairs. The customer is responsible for all transportation charges to the service facility. Packaging and Shipping InstructionWhen you send the product to the AVC service facility you must use the original cartonboxandpackingmaterialoranequivalentasdesignatedbyAVC.Your Responsibility(1) You must retain the original sale receipt to provide proof of purchase.(2) These warranties are effective only if the product is purchased and operated in the U.S.A. or Canada.(3)Warrantiesextendonlytodefectsinmaterialorworkmanship,anddonotextendtoanyproductorpartswhichhavebeenlostordiscarded,ordamage to product or parts caused by misuse, accident, improper operation or maintenance, or use in violation of instructions provided with the product, or to product which has been altered or modified without authorization of AVC, or to products or parts thereof which have had the serial number removed or changed.LIMITED WARRANTY LIMITED WARRANTY Out of WarrantyIn the event your product requires repair after the limited warranty period has expired,pleasecontactourCustomerSupportCenterat1-800-506-5746, 1-877-252-6873 or www.RCAav.com Hours: Monday–Thursday: 9am–7pm, Friday: 9am–5pm, Saturday: 9am–NOON Eastern time.Important: You are responsible for any transportation, shipping or insurance relative to the return of product to our Product Returns Center.All warranties implied by state law, including the implied warranties of merchantabilityandtnessforaparticularpurpose,areexpresslylimitedtothedurationofthelimitedwarrantiessetforthabove.Withtheexceptionofany warranties implied by state law as hereby limited, the foregoing warranty is exclusiveandinlieuofallotherwarranties,guarantees,agreementsandsimilarobligations of manufacturer or seller with respect to the repair or replacement of any parts. In no event shall AVC be liable for consequential or incidental damages.No person, agent, distributor, dealer or company is authorized to change, modify orextendthetermsof these warranties in any manner whatsoever.Thetimewithin action must be commenced to enforce any obligation of AVC arising under the warranty or under any statute, or law of the United States or any state thereof, is hereby limited to one year from the date of purchase. This limitation does not apply to implied warranties arising under state law.This warranty gives you specic legal rights and you may also have other rights, which may vary, from state to state. Some states do not allow limitation on how longanimpliedwarrantylasts,whenanactionmaybebrought,ortheexclusionor limitation of incidental or consequential damages, so the above provisions may not apply to you.For more information on other products and services, please visit our web site at www.RCAav.comImportant: Alsokeepyour“BillofSale”asproofofpurchase.Model no ................................................................ Product name ............................................Type of set ............................................................. Serial no .......................................................Invoice no .............................................................. Date purchased .........................................Dealer name ......................................................................................................................................FORSERVICEANDREPAIR,PLEASEVISITwww.RCAav.com Specicationsandexternalappearancearesubjecttochangewithoutnotice.© 2013 AVC MULTIMEDIA811-692991W010

Navigation menu