Alcohol Monitoring Systems BS400 BS-400 SCRAM Wireless Base Station User Manual SCRAM GPS Quick Ref Guide vD indd

Alcohol Monitoring Systems Inc. BS-400 SCRAM Wireless Base Station SCRAM GPS Quick Ref Guide vD indd

User Manual

SCRAM GPS®Quick Reference Guide
SCRAM GPSQuick Reference Guide iiii©2017 Alcohol Monitoring Systems, Inc.  All rights reserved.  Information in this document is confi dential and proprietary to Alcohol Monitoring Systems, Inc. Such information is subject to change without notice and does not represent any commitment or promise on the part of Alcohol Monitoring Systems, Inc. Any software described in this document is furnished under a license agreement. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purposes without the express written permission of Alcohol Monitoring Systems, Inc.Please read, understand, and follow all information contained in this manual prior to using the SCRAM GPS bracelet.  Retain this manual for future reference.Patents: www.scrampatents.comIntended UseThe SCRAM GPS Bracelet is part of a location tracking and monitoring system and transfers data to a computerized monitoring network. This equipment is intended for use on individuals being monitored by a trained supervising authority.Health and Safety NoticeWARNINGImproper installation or use of this SCRAM device may cause injury.Refer to Health and Safety Notice at www.scramsafety.com or on SCRAMNET Help page and follow instructions to avoid injury.CleaningProperly clean and disinfect SCRAM GPS bracelets before installation using instructions provided on the SCRAMNET Help page.To avoid damaging equipment, use only cleaning and disinfecting products approved by SCRAM Systems on the SCRAMnet Help page. Never use citrus or pine-based cleaning products. To avoid contaminating alcohol sensors within SCRAM Systems products, never use alcohol or alcohol-based cleaning products.Battery WarningsCaution - Contains Li-ion or Li-polymer battery. Do not heat, throw into fi re, deform, short circuit, immerse in or wet with water.Caution - Risk of Explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.To recharge use only the provided SCRAM GPS charger. Connect the external charger by sliding terminal connector into the housing slot.
SCRAM GPSQuick Reference GuideiiiiiiGSM SCRAM GPS BraceletRegulatory Information - EnglishUnited StatesModel GPS-600Input 5V   3AFCC ID P8M-GPS-600Certifi ed to ANSI/UL STD 60950-1 This device complies with part 15 of the FCC Rules. Operation of this device is subject to the following two conditions:1.  This device may not cause harmful interference, and2.  This device must accept any interference received, including interference that may cause undesired operation.Changes or modifi cations to this device not expressly approved by SCRAM Systems could void the user’s authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception the user is encouraged to try to correct the interference by one or more of the following measures:•  Reorient or relocate the receiving antenna.•  Increase the separation between the equipment and receiver.•  Consult the dealer or an experienced radio/TV technician for help.CanadaInput 5V   3AIC:8549A-GPS600PMN: GPS-600HVIN: GPS-600Certifi ed to CAN/CSA STD C22.2 No. 60950-1
SCRAM GPSQuick Reference Guide iiiiiiiiiThis device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:1.  This device may not cause interference, and 2.  This device must accept any interference, including interference that may cause undesired operation of the device.Regulatory Information - SpanishEstados UnidosModelo GPS-600Entrada 5V   3AFCC ID P8M-GPS-600Certifi cado por ANSI/UL STD 60950-1Este aparato cumple con la parte 15 de las Reglas de la FCC. El funcionamiento de este aparato está sujeto a las siguientes dos condiciones:1.  Este aparato no puede provocar interferencias dañinas, y2.  Este aparato debe aceptar la interferencia recibida, incluyendo la interferencia que puede provocar un funcionamiento no deseado.Los cambios o modifi caciones a este dispositivo no aprobados expresamente por los Sistemas SCRAM podrían anular la autoridad del usuario para operar el equipo.Nota: Este equipo ha sido evaluado y se encontró que cumple con los límites para un aparato  digital de la Clase B, conforme con la parte 15 de las Reglas de la FCC. Estos límites están diseñados para proporcionar una protección razonable contra la interferencia dañina en una instalación residencial. Este equipo genera, usa y puede irradiar la energía de frecuencia de radio y, si no se instala y se usa conforme con las instrucciones, puede provocar interferencias dañinas a las comunicaciones de radio. Si este equipo provoca interferencias dañinas a la recepción de radio o televisión, se alienta al usuario a intentar corregir la interferencia con una o más de las siguientes medidas:•  Reorientar o reubicar la antena receptora.•  Aumentar la separación entre el equipo y el receptor.•  Consultar con el proveedor o con un técnico de radio/TV experimentado para obtener ayuda.CanadáEntrada 5V   3A
SCRAM GPSQuick Reference GuideiviiivvvvvvIC:8549A-GPS600PMN: GPS-600HVIN: GPS-600Certifi cado por CAN/CSA STD C22.2 Nro. 60950-1Este aparato cumple con el(los) estándar(es) de la licencia de la Industria Canadiense - RSS exentas.  El funcionamiento está sujeto a las siguientes dos condiciones:1.  Este aparato no puede no provocar interferencias.2.  Este aparato debe aceptar la interferencia, incluyendo la interferencia que puede provocar un funcionamiento no deseado del aparato.Regulatory Information - FrenchÉtats-UnisModèle GPS-600Entrée 5V   3AID FCC  P8M-GPS-600Certifi é ANSI/UL STD 60950-1Cet appareil est conforme à l’article 15 du règlement de la FCC. L’exploitation de cet équipement est assujettie aux deux conditions suivantes:1.  Cet appareil ne doit pas émettre d’interférences indésirables, et2.  Cet appareil doit accepter toutes les interférences reçues, notamment celles pouvant provoquer un fonctionnement indésirable.Des changements ou des modifi cations sur cet appareil qui ne sont pas expressément approuvées par SCRAM Systems peuvent annuler le droit de l’utilisateur à exploiter l’équipement.Remarque: Cet équipement a été testé et est conforme aux limites d’un appareil numérique de classe B, en vertu du paragraphe 15 du règlement de la FCC. Ces limites ont été établies pour fournir une protection raisonnable contre des interférences préjudiciables dans un environnement résidentiel. Cet équipement génère, utilise et peut rayonner de l’énergie HF et, s’il n’est pas installé et utilisé selon les instructions, peut générer des interférences préjudiciables aux radiocommunications. Si cet équipement génère des interférences préjudiciables à la réception de la radio ou de la télévision, l’utilisateur est invité à essayer de corriger l’interférence en utilisant une ou plusieurs parmi les mesures suivantes:
SCRAM GPSQuick Reference Guide vvvvvvvv•  Réorientez ou déplacez l’antenne réceptrice.•  Augmentez la distance entre l’équipement et le récepteur.•  Contactez le revendeur ou un technicien radio/télévision qualifi é.CanadaEntrée 5V   3AIC:8549A-GPS600PMN : GPS-600HVIN : GPS-600Certifi cation CAN/CSA STD C22.2 N° 60950-1Cet appareil est conforme aux normes RSS d’exemptions de licence d’Industrie Canada. Son utilisation est assujettie aux deux conditions suivantes :1.  Cet équipement ne doit pas émettre d’interférences. 2.  Cet équipement doit accepter toutes les interférences, notamment celles pouvant être à l’origine d’un fonctionnement indésirable de l’appareil.CDMI SCRAM GPS BraceletRegulatory Information - EnglishUnited StatesModel GPS-610Input 5V   3AFCC ID P8M-GPS-610Certifi ed to ANSI/UL STD 60950-1 This device complies with part 15 of the FCC Rules. Operation of this device is subject to the following two conditions:1.  This device may not cause harmful interference, and2.  This device must accept any interference received, including interference that may cause undesired operation.Changes or modifi cations to this device not expressly approved by SCRAM Systems could void the user’s authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for
SCRAM GPSQuick Reference Guidevivvvvvvviia Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception the user is encouraged to try to correct the interference by one or more of the following measures:•  Reorient or relocate the receiving antenna.•  Increase the separation between the equipment and receiver.•  Consult the dealer or an experienced radio/TV technician for help.CanadaInput 5V   3AIC:8549A-GPS610PMN: GPS-610HVIN: GPS-610Certifi ed to CAN/CSA STD C22.2 No. 60950-1This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:1.  This device may not cause interference, and 2.  This device must accept any interference, including interference that may cause undesired operation of the device.Device RF ExposureWARNINGThis device has been tested for compliance with FCC RF exposure limits in a portable confi guration. At least 20 cm of separation distance between the BS-400/BS-410 device and the user’s body must be maintained at all times. This device must not be used with any other antenna or transmitter that has not been approved to operate in conjunction with this device.Regulatory Information - SpanishRegulatory information in Spanish placed here.Regulatory Information - FrenchRegulatory Information in French placed here.24/7 Technical Support
SCRAM GPSQuick Reference Guide viivvvvvvvvviii•  Phone - 303.785.7879•  E-mail - gpssupport@scramsystems.com
SCRAM GPSQuick Reference Guideviiivvvvvvviiiiiiii
SCRAM GPSQuick Reference Guide ixixxxxxxxx
SCRAM GPSQuick Reference GuidexxxxxxxTABLE OF CONTENTSIntroduction ............................................................................. 1Glossary of Terms ........................................................................... 1Log On SCRAMNET GPS .............................................................. 2System Setup ........................................................................... 2Add Users ...................................................................................... 2Add Additional Recipients ................................................................. 2Add Account Zones .......................................................................... 3Initial SCRAM GPS Offender Setup ............................................ 3Add New Offender ........................................................................... 3Install SCRAM GPS Bracelet .............................................................. 6Ongoing Offender Management ................................................ 7Process Events................................................................................ 7Utilize GPS Analytics ........................................................................ 8View Offender’s Current Location ....................................................... 9View Offender’s Last Known Location ................................................. 9View Offender’s Movement - Past 24 Hours ......................................... 9View Offender’s Movement - Custom .................................................. 9Closing Tasks ......................................................................... 10Inactivate Offender/Unassign SCRAM GPS Bracelet .............................10Remove SCRAM GPS Bracelet ..........................................................10Clean/Disinfect SCRAM Equipment ....................................................11Inventory Management .......................................................... 12Move SCRAM GPS Bracelets to Another Account .................................12Return Equipment ..........................................................................13Bracelet Alerts/Events .....................................................................13Troubleshooting ..................................................................... 16Product Specifi cations ............................................................ 17
SCRAM GPSQuick Reference Guide 111111INTRODUCTIONThis guide contains the core activities that you might perform when logging into SCRAMNET GPS, setting up the site, or adding and managing an offender who has been enrolled in the SCRAM Systems® Program. A Glossary of Terms and Alert/Event Defi nitions are also included for easy reference.GLOSSARY OF TERMSAlerts – A generic term that refers to events that can potentially generate notifi cations. This term is often used interchangeably with events.Events – A generic term that is used to describe any bracelet-related occurrence that can be displayed in the Event Details window. Events can be informational, such and plugs and unplugs, or they can represent a critical incident that needs immediate attention.Messages – Refers to the actual data that is sent by a bracelet to the system. Messages include a variety of information including location, battery status, bracelet status, and event information.Notifi cations – Notifi cations are emails and/or text messages that are sent to recipients when designated events are generated.Onboard Zones vs. Exclusion/Inclusion Zones – Onboard zones can only be circular. Eight exclusion zones and two inclusion zones can be established for each offender.Violations – Violations refer to events where the offender has entered or exited a zone when a schedule required him to be either in (inclusion zones) or out (exclusion zones) of the zone. Exclusion zones always have a 24/7 schedule. Neutral zones automatically generate alerts, but have no schedules and therefore no violations.
SCRAM GPSQuick Reference Guide2222222LOG ON SCRAMNET GPSTo log on to the SCRAMNET GPS website:1.  Go to https://insight.gryphex.com.•  Internet Explorer - v10 or later•  Firefox - Versions released in last 6 months•  Chrome - Versions released in last 6 months2.  Enter the user name in the User Name fi eld.3.  Enter the password in the Password fi eld.Note: The Password is case sensitive.4. Click the Login button.SYSTEM SETUPADD USERSTo add a user:1. Click the Add User button.2.  Enter/select all information in the fi elds and drop-down lists with the light-blue background.3.  Enter the user’s address in the Address panel.4. Click the Phone Number tab and enter all of the user’s cellular phone numbers.5. Click the Save button.ADD ADDITIONAL RECIPIENTSBy default, all users added in SCRAMNET GPS are automatically designated as notifi cation recipients. To add an additional recipient:1. Click the Add Recipient button.2.  Enter/select all information in the fi elds and drop-down lists with the light-blue background.
SCRAM GPSQuick Reference Guide 333333333.  Enter the user’s cell phone number in the Cell Phone fi eld.4. Click the Save button.ADD ACCOUNT ZONESAccount zones can be used for multiple offenders. To add an account zone:1. Click the Add Zone button.2.  Select the type of account zone being added.3.  Enter the account zone name in the Name fi eld.4.  Select the zone shape (circle or rectangle) in the Shape drop-down list.5.  Enter/select address information.6. Click the Apply Changes button.The map moves to the address entered.7. Click the Save button.INITIAL SCRAM GPS OFFENDER SETUPADD NEW OFFENDERPROFILETo set up the offender profi le:1.  Enter the offender’s fi rst and last name and any additional information.2.  In the Manage Photos panel, click the Select button to add a photograph of the offender.3. Click the Address tab and enter the offender’s home address.4. Click the Save button.
SCRAM GPSQuick Reference Guide4444444SUPERVISION PLANThe SCRAM GPS Bracelet being assigned to the offender is selected while establishing the supervision plan that will be used. To perform these steps:1. Click the Supervision Plan tab.2.  Select the bracelet being assigned in the Locator drop-down list.3. Click the Add button in the Assign Locator section.4.  Select the supervision plan being used for this offender in the Supervision Plan drop-down list.5. Click the Apply button.OFFENDER ZONESTo create an offender zone:1. Select the Zones tab.2. Click the Create Zone button.3.  Select the type of zone being created.4.  Enter the zone name in the Name fi eld.5.  Select the zone shape (circle, polygon, or rectangle) in the Shape drop-down list.6.  Select an option in the Location Type drop-down list.The ‘Home’ and ‘Work/School’ options are only available for Onboard Inclusion zones. The ‘Other’ option can be used for any type of zone.7.  Enter/select address information.8. Select the Enters and/or Exits check boxes if you want to view when the offender enters or exits this zone.9. Click the Apply Changes button.The map moves to the address entered.10. Click the Save button.
SCRAM GPSQuick Reference Guide 5555555ZONE SCHEDULESTo establish the schedule for an offender:1. Click the Schedules button.The ‘Zones and Schedule’ pop-up window appears.2.  Double-click the date/time fi eld where the schedule will begin.The ‘Schedule Details’ pop-up window appears.3.  In the pop-up window:a.  Select the zone that you want to schedule.b.  Name the schedule.c.  Select the schedule start date.d.  Select the allowed out time.e.  Select the the days in which the schedule applies.f.  Select travel time and/or grace period.g. Click the Save button.The schedule windows now appear in the ‘Zones and Schedule’ pop-up window.4.  Close the ‘Zones and Schedule’ pop-up window.5. Click the Save button.USERS AND RECIPIENTSTo select users who will be managing the offender and recipients who will receive notifi cations:1. Select the Users and Recipients tab.2.  Select the appropriate personnel in the All Users fi eld.3.  Click the upper Right Arrow icon.The selected users now appear in the Assigned Users By Account ID fi eld.4.  Select the appropriate personnel in the All Recipients fi eld.5.  Click the lower Right Arrow icon.
SCRAM GPSQuick Reference Guide6666666The selected recipients now appear in the Assigned Recipients By Account ID fi eld.NOTIFICATIONSTo select the events that will result in a notifi cation being sent to designated individuals:1. Select the Notifi cations tab.2.  Select an individual in the User/Recipient drop-down list.3.  In the Critical, Serious, Warning, and Message panels, select the appropriate Text Message and/or Email check boxes.4. Click the Save button.INSTALL SCRAM GPS BRACELETPRE-INSTALLATION1.  Connect the external charger by sliding the terminal into the housing slot. AMS Best Practices for charging recommend that the device be charged until the Green light stops blinking.•  Charging - Flashing Green Light•  Charge Complete - Solid Green Light2.  Ensure that the teeth on the back plate are not missing or damaged.3.  Ensure that the indicator lights on the bracelet are facing up and are visible by the offender while wearing.4.  Note the proper orientation of the back plate on the strap prior to wrapping the strap around the offender’s ankle.BRACELET INSTALLATIONTo install the bracelet on the offender’s lower leg:1.  Place the back plate fl at against the offender’s lower leg.2.  Wrap the bracelet around the leg to overlap the loose end.
SCRAM GPSQuick Reference Guide 777777773.  Locate the tabs on the bracelet near the anchor point and insert the tabs into the slots on the back plate.4.  Being careful not to push the bracelet fl ush with the back plate, push the bracelet until you hear a soft click.5.  Ensure that the fi t is correct and readjust if necessary.6.  Ensure that the tabs are securely in the slots.7.  Push the bracelet fl ush with the back plate.You should hear two distinct clicks as the bracelet is secured.One fi nger should fi t between the strap and leg.If the installation is successful, a Device Tamper event will be generated.ONGOING OFFENDER MANAGEMENTPROCESS EVENTSTo process events in SCRAMNET GPS:1.  On the Dashboard page, click the Details link.The ‘Events/Alerts’ pop-up window appears.2.  Select the check boxes for each event being processed.Note: Select the top-left check box to process all events at once.3. Click the Clear Selected button.The ‘Enter Exception Notes’ pop-up window appears.4.  Enter a note and click the Submit button.All selected events are removed.To add an event note:1.  In the ‘Events/Alerts’ pop-up window, select an event.2. Click the Add Event Note button.An ‘Enter Exception Notes’ pop-up window appears.
SCRAM GPSQuick Reference Guide88888883.  Enter a note in the fi eld.4. Click the Submit button.A Note icon appears in the Notes column for the selected event.Map Features• Map Views »Map - Typical view shown when a map is accessed in SCRAMNET GPS. »Satellite - Image view from overhead. By default, the image is displayed at a 45° angle with street labels shown. »Street Level - Displays a panoramic view of an exact location and its surrounding area.• Zone Colors »Red - Exclusion Zone »Green - Inclusion Zone »Purple - Neutral ZoneUTILIZE GPS ANALYTICS1. Select the GPS Analytics top-navigation option.The GPS Analytics page appears.2.  Select a report in the Report Types drop-down list.OFFENDER STOP PATTERNS REPORT1.  Select the offender.2.  Select a start and end date.3.  Select the minumum number of points at the location.4. Click the Run Report button.The GPS Analytics chart and map are displayed.OFFENDER SHARED LOCATIONS REPORT1.  Select at least two offenders.2.  Select a start and end date.3.  Select the minimum number of points at the location.
SCRAM GPSQuick Reference Guide 999999994. Click the Only Locations Visited at Same Time check box (optional).5. Click the Run Report button.Locations that at least two offenders visited are listed.VIEW OFFENDER’S CURRENT LOCATION1.  On the Dashboard page, highlight the offender.2. Click the Locate Now icon.A ‘Command Sent’ pop-up window appears, then the pop-up window is date and time stamped, and then the offender’s current location is shown.VIEW OFFENDER’S LAST KNOWN LOCATION1.  On the Dashboard page, click the Map icon for the offender.The Location History panel appears with the offender’s last known location shown on the map.VIEW OFFENDER’S MOVEMENT - PAST 24 HOURS1.  On the Dashboard page, click the Map icon for the offender.The Location History panel appears.2. Click the Show button.All points visited during the last 24 hours are listed.VIEW OFFENDER’S MOVEMENT - CUSTOM1.  On the Dashboard page, click the Map icon for the offender.The Location History panel appears.2.  Select the ‘Custom’ option in the left drop-down list.3.  Click in the From fi eld, select a date and time in the calendar, and click the Done button.4.  Click in the To fi eld, select a date and time in the calendar, and click the Done button.
SCRAM GPSQuick Reference Guide1011111100000005. Click the Show button.All points visited during the selected time period are listed.CLOSING TASKSINACTIVATE OFFENDER/UNASSIGN SCRAM GPS BRACELET1.  On the Dashboard page, click the link of the offender’s name.The ‘Profi le Summary’ pop-up window appears.2. Click the Device Information link.3.  In the Device Confi guration section, click the Unassign button.A message box appears.4. Click the OK button to close the message box.5. Click the Profi le tab.The offender’s Profi le panel appears.6.  Select the ‘Inactive’ option in the Status drop-down list.An ‘Inactivation Reason’ pop-up window appears.7.  Select the reason for inactivation and click the Inactivate Offender button.8. Click the Save button.REMOVE SCRAM GPS BRACELETTo remove the bracelet from the offender’s lower leg:1.  Fully insert a 5/16 inch fl at-blade screwdriver into one of the tab-release slots, located on the back plate, to tear through the thin plastic partition.2.  Twist the screw driver at least 180 degrees until you hear a loud click, indicating that the back plate tab has broken.
SCRAM GPSQuick Reference Guide 1111111111113.  Repeat steps 1 and 2 on the other tab-release slot. 4.  With both tabs broken, pull the bracelet away from the back plate.5.  Remove the back plate and strap from the offender’s ankle area.CLEAN/DISINFECT SCRAM EQUIPMENTTo avoid damaging SCRAM equipment, use only cleaning and disinfecting products approved by SCRAM Systems as listed below. NEVER USE CITRUS/PINE-BASED CLEANING PRODUCTS OR ALCOHOL AND/OR ALCOHOL-CONTAINING CLEANING PRODUCTS.APPROVED PRODUCTS•  Sporicidin® Disinfectant (USA)•  SporeClear™ Disinfectant (outside of USA)•  Windex® Multisurface Disinfectant Cleaner (yellow Windex)SPORICIDIN/SPORECLEARSporicidin (USA) is available to order online or from SCRAM Systems, SporeClear (outside of USA) is only available online. Both products are strongly recommended for disinfecting all SCRAM ankle bracelets. These are medical-grade disinfectants that do NOT contain alcohol and kill 100% of disease and odor-causing organisms*.To disinfect a SCRAM bracelet using either of these products:1.  If the situation warrants, remove the faceplate and bracelet straps.2.  Spray on and allow surfaces to remain wet for 10 minutes.3.  Rinse with water or wipe surfaces.4.  Dry with a paper towel or cloth.5.  If the bracelet straps were removed, install bracelet straps and faceplate.
SCRAM GPSQuick Reference Guide121111112222222WINDEXWindex Multisurface Disinfectant Cleaner (yellow Windex) is readily available at most department stores and home improvement stores. It does not contain alcohol, is approved for all SCRAM Systems products, and kills 99.9% of all germs and bacteria*. To clean device using this product, spray on and wipe off with a paper towel or cloth.To disinfect device using this product:1.  Spray on and allow surfaces to remain wet for 10 minutes.2.  Wipe surfaces dry with a paper towel or cloth.GENERAL INFORMATIONHandle all previously worn SCRAM ankle bracelets with gloves and a facemask prior to disinfecting.If you feel a piece of SCRAM equipment may pose a specifi c health hazard, minimize the number of people who come into contact with the device and dispose of it in a sealed, plastic bag.Contact SCRAM Systems Customer Services at 303.785.7879 or support@scramsystems.com with the serial number of the device being removed and/or decremented from your inventory. DO NOT return the device to SCRAM Systems.*According to manufacturer’s published claimsINVENTORY MANAGEMENTMOVE SCRAM GPS BRACELETS TO ANOTHER ACCOUNT1.  Select the check box for each bracelet being moved.
SCRAM GPSQuick Reference Guide 131111133333332.  Select the receiving account in the Move Devices To drop-down list.3. Click the Move button.The transferred SCRAM GPS equipment will now appear in the receiving account.RETURN EQUIPMENTContact AMS Customer Services at 303.785.7879 to request an RMA so the GPS equipment can be shipped and replaced.E-mail: gpssupport@scramsystems.comALERT/EVENT DEFINITIONSBRACELET ALERTS/EVENTSCritical Alerts DescriptionExclusion Zone Violation Generated when an offender enters an exclusion zone and the system determines that one or more location points are inside the zone.Exclusion Zone Violation Clear Generated when the offender exits the exclusion zone.Device Tamper Generated when an offender separates or damages the back plate that secures the bracelet to the offender.User clears this alert from Dashboard page after entering note.Strap Tamper Generated when an offender cuts, damages, or removes the strap from the bracelet.User clears this alert from Dashboard page after entering note.Serious Alerts DescriptionBattery Critical Generated when the bracelet battery reaches a pre-defi ned low point, which is approximately 30 minutes of battery life left.
SCRAM GPSQuick Reference Guide1411111144444444Serious Alerts DescriptionBattery Low Clear Generated when the bracelet is plugged into an AC outlet and reaches a pre-defi ned charge level.Communication Failure Generated when the bracelet fails to communicate with the system for a period that exceeds the transmission frequency interval of the offender’s supervision plan, and the user-defi ned buffer period for communication failures.Communication Failure Clear Generated when the bracelet re-establishes communication with the system.Location Failure Generated when the bracelet is unable to transmit a valid location within the communication interval established by the offender’s supervision plan and a user defi ned buffer period.Location Failure Clear Generated when the bracelet receives a valid location point after there has been a location failure and that location point is successfully communicated to the system.Inclusion Zone Violation Generated when an offender moves outside the boundaries of an inclusion zone during a schedule period.Inclusion Zone Violation Clear Generated when the offender enters an inclusion zone for which there was an inclusion zone violation.Exclusion Zone Buffer Entry Generated when the offender enters a user-defi ned buffer area surrounding an exclusion zone.Exclusion Zone Buffer Exit Generated when the offender exits the exclusion zone buffer area by moving away from the exclusion zone.Warning Events DescriptionBattery Low Generated when the bracelet battery level reaches a predefi ned low level.Battery Low Clear Generated after the bracelet has been plugged into an AC outlet for a period of time needed to give the battery a suffi cient amount of charge.Message Events DescriptionAC Plugin Indicates that the bracelet has been plugged into an AC outlet and is currently being charged.AC Unplug Indicates that the bracelet has been unplugged from an AC outlet and is currently running on battery power only.
SCRAM GPSQuick Reference Guide 15111115555555Message Events DescriptionExclusion Zone Entry Indicates that the offender has entered an exclusion zone.If user chooses, this event is generated independent of the Exclusion Zone Violation Event that would also be generated when an offender enters an exclusion zone.Exclusion Zone Exit Indicates that the offender has exited an exclusion zone.Inclusion Zone Entry Indicates that the offender has entered an inclusion zone.Inclusion Zone Exit Indicates that the offender has exited an inclusion zone.Neutral Zone Entry Indicates that the offender has entered a neutral zone.Neutral Zone Exit Indicates that the offender has exited a neutral zone.Audible - Command Sent Indicates that the user sent an audible alarm to the bracelet.Audible - Device Received Sent by the bracelet to indicate that it received the audible command from the system.Vibrate - Command Sent Indicates that the user sent a vibrate alarm to the bracelet.Vibrate - Device Received Sent by the bracelet to indicate that it received the vibrate command from the system.Acknowledgement Indicates that the offender has responded to the audible or vibrate command by pressing the button on the bracelet.Exclusion Zone Buffer Exit Generated when the offender exits the exclusion zone buffer area by moving away from the exclusion zone.Battery Low Vibrate - Offender did not push buttonGenerated when a user sends a vibrate command to the bracelet and the offender does not acknowledge by pushing the button on the bracelet.Battery Low Vibrate - Offender pushed buttonGenerated when a user sends a vibrate command to the bracelet and the offender pushes the button on the bracelet.End Of Service Indicates that the offender has been inactivated.
SCRAM GPSQuick Reference Guide161111116666666TROUBLESHOOTINGIssue Indication Recommended ActionNo Communication Indicates that the bracelet is unable to communicate with cell tower. On the Dashboard page, a solid red icon appears in the Equipment column for the client.Instruct offender to plug device in for 15 minutes.If communication failure does not clear, instruct offender to stand outside for 15 minutes in an attempt to communicate with cell tower.No Location Indicates that the satellites are unable to acquire the offender’s bracelet to give a current location point. On the Dashboard page, a solid red icon appears in the Location column for the client.Instruct offender to step outside for 15 minutes and send a ‘Locate Now’ command to the offender’s bracelet through the software.“NA” Battery Status Indicates that the bracelet battery voltage has not updated within the last 2 hours. On the Dashboard page, the Battery icon in the Locator Battery column will display “NA” inside the battery.Check the ‘Events Detail’ window to determine if the offender let the bracelet battery completely deplete due to lack of charging. If so, have offender charge the bracelet.If the bracelet has been in communication failure for over 2 hours then the bracelet will go into “NA” battery status.Follow the recommended actions to clear the communication failure.Bracelet Tamper Indicates that there was a potential back plate tamper. On the Dashboard page, a blinking red icon appears in the Equipment column for the client.Visually inspect the bracelet for signs of a tamper around the back plate.If there are no signs of a tamper, replace the back plate.If the back plate fails to secure completely or the bracelet regenerates a tamper alert shortly after replacing the back plate, replace the bracelet and request an RMA from AMS.
SCRAM GPSQuick Reference Guide 17111117777777Issue Indication Recommended ActionStrap Tamper Indicates that there was a potential strap tamper. On the Dashboard page, a blinking red icon appears in the Equipment column for the client.Visually inspect the bracelet for signs that the strap has been cut or compromised by a heat source.If there are no signs of a tamper, replace the bracelet and request an RMA from AMS.Battery Critical Low Battery May indicate that the bracelet is not charging properly or the bracelet is not holding a charge. The ‘Event Details’ window will display the charging history.For a bracelet that is not charging, ensure that a green fl ashing light turns on when the bracelet is placed on a charger.If no lights turn on, replace the charger.If replacing the charger does not correct the issue, replace the bracelet and request an RMA from AMS.For a bracelet that is not holding a charge, check the ‘Event Details’ window to ensure that the offender is charging the bracelet as instructed.If the offender appears to be charging the bracelet as instructed and the battery is depleting faster than normal, replace the bracelet and request an RMA from AMS.PRODUCT SPECIFICATIONSBRACELETDimensions: 8.3 cubic inches (3.37” tall x 2.75” wide x 0.90” deep)Weight: 5.5 oz (156 grams)Waterproof: IP68 military standard (2 meters)Strap Material: Hypoallergenic, industrial-grade plastic, embedded fi ber optic cableCellular Network: 3G GSM (AT&T)GPS Monitoring Options: Active, Hybrid, Passive
SCRAM GPSQuick Reference Guide1811111188888888Primary Location Technology:  Autonomous GPS, Assisted GPSSecondary Location Technology: Cell tower triangulation and tower location-based services (LBS); RF base stationMemory (storage): On-board, up to 3,600 eventsBattery Life: 50+ hoursBattery Recharging Time: AMS Best Practices for charging recommend that the device be charged until the green light stops blinkingTwo-way Communication: Audible tone and vibrate notifi cations; client acknowledge buttonZones: Inclusion, Exclusion, and Neutral. On-board and on-server zone storageTamper Detection: Cut strap and device tamper (backplate removal)Alert Notifi cation: User confi gurable e-mail or text
24685DAlcohol Monitoring Systems, Inc.1241 W. Mineral Avenue, Suite 200, Littleton, CO 80120Tel: 303.785.7879  Fax: 303.791.4262Email: gpssupport@scramsystems.comA

Navigation menu