Alutron Modules RFR Central Vacuum Remote Control Receiver User Manual Users manual LV11

Download:
Mirror Download [FCC.gov]
Document ID	575476
Application ID	5VsU27Fj6mo7XjsSVu2QCg==
Document Description	Users manual LV11
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.15kB (51888 bits)
Date Submitted	2005-08-26 00:00:00
Date Available	2005-08-26 00:00:00
Creation Date	2005-04-01 12:09:49
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2005-04-01 12:09:49
Document Title	Microsoft PowerPoint - PN 980 INS-004 Rev 1.1 Hose Handle RF Kit - LV11 - Wireless Controller - Installation Instructions (Apri
Document Creator	PScript5.dll Version 5.2
Document Author:	rdulmage

Hose Handle RF Kit - Wireless Controller – LV11
Installation Instructions
Caution: Disconnect power to central vacuum system before starting
1.
Remove low-voltage wires from central vacuum unit, if connected.
2.
Install low-voltage wire jumpers (supplied) to the central vacuum unit. Install the other end of the wire
jumper to the tabs on the LV11 Wireless Receiver labelled “LV”.
3.
Mount the LV11 in a suitable location. Ensure the antenna is extended straight up from the top of the
unit. Mount receiver at a minimum distance of 6 feet away from the central vacuum unit in order
to prevent electrical interference of the RF signal from the motor.
4.
Insert connector end of the power adapter to the LV11 “9 Vac Input” terminal.
5.
Turn power back on to central vacuum unit and plug AC adapter into power source.
6.
To program the Hose Handle Transmitter: Press, with a pointed object, the switch located on the top
side of the LV11 Wireless Receiver. Immediately press and hold the right side of the rocker switch
located on the Hose Handle for 1 second. Programming is now complete.
7.
Operation of the Transmitter: to turn on the central vacuum unit, press the right side of the rocker
switch located on the Hose Handle. To turn off, press the left side of the rocker switch on the Hose
Handle.
Part Nbr: 980 INS-004 Rev 1.1
NOTE: Changes or modifications not expressly approved by Alutron
Modules could void the user's authority to operate the equipment.
April 2005
Hose Handle RF Kit - Wireless Controller – LV11
Installation Instructions
Caution: Disconnect power to central vacuum system before starting
1.
Remove low-voltage wires from central vacuum unit, if connected.
2.
Install low-voltage wire jumpers (supplied) to the central vacuum unit. Install the other end of the wire
jumper to the tabs on the LV11 Wireless Receiver labelled “LV”.
3.
Mount the LV11 in a suitable location. Ensure the antenna is extended straight up from the top of the
unit. Mount receiver at a minimum distance of 6 feet away from the central vacuum unit in order
to prevent electrical interference of the RF signal from the motor.
4.
Insert connector end of the power adapter to the LV11 “9 Vac Input” terminal.
5.
Turn power back on to central vacuum unit and plug AC adapter into power source.
6.
To program the Hose Handle Transmitter: Press, with a pointed object, the switch located on the top
side of the LV11 Wireless Receiver. Immediately press and hold the right side of the rocker switch
located on the Hose Handle for 1 second. Programming is now complete.
7.
Operation of the Transmitter: to turn on the central vacuum unit, press the right side of the rocker
switch located on the Hose Handle. To turn off, press the left side of the rocker switch on the Hose
Handle.
Part Nbr: 980 INS-004 Rev 1.1
NOTE: Changes or modifications not expressly approved by Alutron
Modules could void the user's authority to operate the equipment.
April 2005

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2005:04:01 12:09:49-05:00
Modify Date                     : 2005:04:01 12:09:49-05:00
Page Count                      : 1
Creation Date                   : 2005:04:01 17:09:49Z
Mod Date                        : 2005:04:01 17:09:49Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : rdulmage
Metadata Date                   : 2005:04:01 17:09:49Z
Creator                         : rdulmage
Title                           : Microsoft PowerPoint - PN 980 INS-004 Rev 1.1 Hose Handle RF Kit - LV11 - Wireless Controller - Installation Instructions (Apri

EXIF Metadata provided by EXIF.tools