Alvarion Technologies COMPACT3X Base station transceiver User Manual Compact System Manual

Alvarion Technologies Ltd. Base station transceiver Compact System Manual

UserManual.wiki >

Alvarion Technologies >

COMPACT3X User Manual >

Contents

User manual

BreezeCOMPACTSystem ManualRelease Version: 1.0December 2011P/N

BreezeCOMPACT System Manual iiDocument HistoryDocument HistoryTopic Description Date IssuedBreezeCOMPACT System Manual First publication of a System Manual for a new productMarch 2012

BreezeCOMPACT System Manual ivLegal RightsDisclaimer(a) The Software is sold on an "AS IS" basis. Alvarion, its affiliates or its licensors MAKE NO WARRANTIES, WHATSOEVER, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THE SOFTWARE AND THE ACCOMPANYING DOCUMENTATION. ALVARION SPECIFICALLY DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT WITH RESPECT TO THE SOFTWARE. UNITS OF PRODUCT (INCLUDING ALL THE SOFTWARE) DELIVERED TO PURCHASER HEREUNDER ARE NOT FAULT-TOLERANT AND ARE NOT DESIGNED, MANUFACTURED OR INTENDED FOR USE OR RESALE IN APPLICATIONS WHERE THE FAILURE, MALFUNCTION OR INACCURACY OF PRODUCTS CARRIES A RISK OF DEATH OR BODILY INJURY OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE ("HIGH RISK ACTIVITIES"). HIGH RISK ACTIVITIES MAY INCLUDE, BUT ARE NOT LIMITED TO, USE AS PART OF ON-LINE CONTROL SYSTEMS IN HAZARDOUS ENVIRONMENTS REQUIRING FAIL-SAFE PERFORMANCE, SUCH AS IN THE OPERATION OF NUCLEAR FACILITIES, AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL, LIFE SUPPORT MACHINES, WEAPONS SYSTEMS OR OTHER APPLICATIONS REPRESENTING A SIMILAR DEGREE OF POTENTIAL HAZARD. ALVARION SPECIFICALLY DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR HIGH RISK ACTIVITIES.(b) PURCHASER'S SOLE REMEDY FOR BREACH OF THE EXPRESS WARRANTIES ABOVE SHALL BE REPLACEMENT OR REFUND OF THE PURCHASE PRICE AS SPECIFIED ABOVE, AT ALVARION'S OPTION. TO THE FULLEST EXTENT ALLOWED BY LAW, THE WARRANTIES AND REMEDIES SET FORTH IN THIS AGREEMENT ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING BUT NOT LIMITED TO WARRANTIES, TERMS OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, SATISFACTORY QUALITY, CORRESPONDENCE WITH DESCRIPTION, NON-INFRINGEMENT, AND ACCURACY OF INFORMATION GENERATED. ALL OF WHICH ARE EXPRESSLY DISCLAIMED. ALVARION' WARRANTIES HEREIN RUN ONLY TO PURCHASER, AND ARE NOT EXTENDED TO ANY THIRD PARTIES. ALVARION NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS.Limitation of Liability(a) ALVARION SHALL NOT BE LIABLE TO THE PURCHASER OR TO ANY THIRD PARTY, FOR ANY LOSS OF PROFITS, LOSS OF USE, INTERRUPTION OF BUSINESS OR FOR ANY INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY KIND, WHETHER ARISING UNDER BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE AND WHETHER BASED ON THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.(b) TO THE EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL THE LIABILITY FOR DAMAGES HEREUNDER OF ALVARION OR ITS EMPLOYEES OR AGENTS EXCEED THE PURCHASE PRICE PAID FOR THE PRODUCT BY PURCHASER, NOR SHALL THE AGGREGATE LIABILITY FOR DAMAGES TO ALL PARTIES REGARDING ANY PRODUCT EXCEED THE PURCHASE PRICE PAID FOR THAT PRODUCT BY THAT PARTY (EXCEPT IN THE CASE OF A BREACH OF A PARTY'S CONFIDENTIALITY OBLIGATIONS).Radio Frequency Interference StatementThe Base Transceiver Station (BTS) equipment has been tested and found to comply with the limits for a class A digital device, pursuant to ETSI EN 301 489-1 rules and Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in commercial, business and industrial environments. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at the user's own expense.

BreezeCOMPACT System Manual vLegal RightsFCC and Industry Canada Radiation Hazard Warning To comply with Industry Canada exposure requirements, and FCC RF exposure requirements in Section 1.1307 and 2.1091 of FCC Rules, the antenna used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2 meters from all persons.Industry Canada StatementUsers can obtain Canadian information on RF exposure and compliance from the Canadian Representative:Nick Dewar Nick.Dewar@alvarion.com Canadian Radio Standards Specifications (RSS) Compliance StatementThis device has been designed to operate with the antennas listed in Section 1.4.8 of this manual, and having a maximum gain of 18 dBi. Antennas not included in this list or having a gain greater than 18 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the Equivalent Isotropically Radiated Power (EIRP) is not more than that permitted for successful communication.R&TTE Compliance StatementThis equipment complies with the appropriate essential requirements of Article 3 of the R&TTE Directive 1999/5/EC.Safety Considerations - GeneralFor the following safety considerations, "Instrument" means the BreezeCOMPACT units' components and their cables.GroundingBTS chassis is required to be bonded to protective grounding using the bonding stud or screw provided with each unit. Safety Considerations - DC Powered EquipmentRestricted Access Area: The DC powered equipment should only be installed in a Restricted Access Area.Installation Codes: The equipment must be installed according to the latest edition of the country national electrical codes. For North America, equipment must be installed in accordance with the US National Electrical Code and the Canadian Electrical Code.Overcurrent Protection: A readily accessible Listed branch circuit overcurrent protective device, rated 10A must be incorporated in the building wiring.CAUTION: This equipment is designed to permit connection between the earthed conductor of the DC supply circuit and the grounding conductor at the equipment. See installation instructions.CAUTION ATTENTIONRisk of electric shock and energy hazard. Risque de décharge électrique et d'electrocution.

BreezeCOMPACT System Manual viLegal RightsThe equipment must be connected directly to the DC Supply System grounding electrode conductor.All equipment in the immediate vicinity must be grounded in the same way, and not be grounded elsewhere.The DC supply system is to be local, i.e. within the same premises as the equipment.There shall be no disconnect device between the grounded circuit conductor of the DC source (return) and the point of connection of the grounding electrode conductor.CautionTo avoid electrical shock, do not perform any servicing unless you are qualified to do so.Line VoltageBefore connecting this instrument to the power line, make sure that the voltage of the power source matches the requirements of the instrument.RadioThe instrument transmits radio energy during normal operation. To avoid possible harmful exposure to this energy, do not stand or work for extended periods of time in front of its antenna. The long-term characteristics or the possible physiological effects of radio frequency electromagnetic fields have not been yet fully investigated.Outdoor Units and Antennas Installation and GroundingEnsure that outdoor units, antennas and supporting structures are properly installed to eliminate any physical hazard to either people or property. Make sure that the installation of the outdoor unit, antenna and cables is performed in accordance with all relevant national and local building and safety codes. Even where grounding is not mandatory according to applicable regulation and national codes, it is highly recommended to ensure that the outdoor unit and the antenna mast are grounded and suitable lightning protection devices are used so as to provide protection against voltage surges and static charges. In any event, Alvarion is not liable for any injury, damage or regulation violations associated with or caused by installation, grounding or lightning protection.Disposal of Electronic and Electrical WasteDisposal of Electronic and Electrical WastePursuant to the WEEE EU Directive electronic and electrical waste must not be disposed of with unsorted waste. Please contact your local recycling authority for disposal of this product.

BreezeCOMPACT System Manual viiImportant NoticeImportant NoticeThis user manual is delivered subject to the following conditions and restrictions:This manual contains proprietary information belonging to Alvarion Ltd. Such information is supplied solely for the purpose of assisting properly authorized users of the respective Alvarion products.No part of its contents may be used for any other purpose, disclosed to any person or firm or reproduced by any means, electronic and mechanical, without the express prior written permission of Alvarion Ltd.The text and graphics are for the purpose of illustration and reference only. The specifications on which they are based are subject to change without notice.The software described in this document is furnished under a license. The software may be used or copied only in accordance with the terms of that license.Information in this document is subject to change without notice. Corporate and individual names and data used in examples herein are fictitious unless otherwise noted.Alvarion reserves the right to alter the equipment specifications and descriptions in this publication without prior notice. No part of this publication shall be deemed to be part of any contract or warranty unless specifically incorporated by reference into such contract or warranty. The information contained herein is merely descriptive in nature, and does not constitute an offer for the sale of the product described herein.Any changes or modifications of equipment, including opening of the equipment not expressly approved by Alvarion Ltd. will void equipment warranty and any repair thereafter shall be charged for. It could also void the user's authority to operate the equipment.Some of the equipment provided by Alvarion and specified in this manual, is manufactured and warranted by third parties. All such equipment must be installed and handled in full compliance with the instructions provided by such manufacturers as attached to this manual or provided thereafter by Alvarion or the manufacturers. Non-compliance with such instructions may result in serious damage and/or bodily harm and/or void the user's authority to operate the equipment and/or revoke the warranty provided by such manufacturer.

BreezeCOMPACT System Manual ixAbout This ManualAbout This ManualThis manual describes the BreezeCOMPACT solution, and details how to install, operate and manage the BTS equipment.This manual is intended for technicians responsible for installing, setting and operating the BreezeCOMPACT BTS equipment, and for system administrators responsible for managing the system.This manual contains the following chapters and appendices:Chapter 1 - System description: Describes the BreezeCOMPACT system.Chapter 2 - Installation: Describes how to install the BTS equipment.Chapter 3 - Commissioning: Describes how to configure basic parameters and validate units' operation.Chapter 4 - Operation and Administration: Describes how to use the Monitor program for configuring parameters, checking system status and monitoring performance.

BreezeCOMPACT System Manual xContentsContentsChapter 1 - System Description ............................................................................. 11.1 About WiMAX.......................................................................................................21.1.1 Introduction to WiMAX ........................................................................................ 21.1.2 WiMAX Network Reference Model.......................................................................21.2 The Breeze Compact Solution ...............................................................................91.2.1 Breeze Compact Highlights.................................................................................. 91.2.2 Network Architectures ........................................................................................ 91.2.3 System Topologies ............................................................................................101.2.4 Antennas ........................................................................................................... 121.2.5 GPS .................................................................................................................... 121.3 Element Management Systems ...........................................................................141.3.1 AlvariSTAR ......................................................................................................... 141.4 Specifications ....................................................................................................151.4.1 Modem & Radio................................................................................................. 151.4.2 Sensitivity (per channel)*.................................................................................. 151.4.3 ODUs ................................................................................................................. 161.4.4 Micro Outdoor BTS ............................................................................................251.4.5 AU - ODU Communication (Macro BTS).............................................................. 261.4.6 Data Communication (Ethernet Interfaces)....................................................... 271.4.7 Configuration and Management ........................................................................ 271.4.8 Standards Compliance, General......................................................................... 281.4.9 Environmental ................................................................................................... 281.4.10 Mechanical and Electrical................................................................................... 281.4.11 BMAX-4M-GPS Receiver Specifications .............................................................. 321.4.12 Antennas ........................................................................................................... 33Chapter 2 - Commissioning .................................................................................. 402.1 Introduction.......................................................................................................412.2 Configuring Parameters Required for Management Connectivity..........................422.2.1 Configuring the BTS Number ............................................................................. 422.2.2 Configuring the Management Interface Connectivity Mode Parameter.............42

BreezeCOMPACT System Manual xiContents2.2.3 Configuring the IP Interfaces Parameters.......................................................... 422.2.4 Configuring the L1 & L2 Parameters (if necessary)........................................... 432.2.5 Configuring the SNMP Authorized Manager and Traps Manager ....................... 442.2.6 Applying the Configuration................................................................................452.3 Activating the Unit .............................................................................................462.3.1 Creating the BS.................................................................................................. 462.3.2 Defining the Antenna(s) .................................................................................... 482.3.3 Configuring Radio Cluster Parameters............................................................... 482.3.4 Configuring Antenna Associations.....................................................................492.3.5 Applying the Configuration................................................................................49Chapter 3 - Operation and Administration .......................................................... 503.1 BTS System Management ...................................................................................513.2 The Monitor Program..........................................................................................523.2.1 Accessing the Monitor Program......................................................................... 523.2.2 Using the Monitor Program ............................................................................... 533.3 IP Addresses Configuration.................................................................................553.3.1 IP Address Configuration Restrictions ............................................................... 553.3.2 IP Subnets.......................................................................................................... 553.4 The Main Menu...................................................................................................563.5 BTS Menu...........................................................................................................573.5.1 General ..............................................................................................................573.5.2 Connectivity....................................................................................................... 583.5.3 Unit Control ....................................................................................................... 643.5.4 Management...................................................................................................... 683.6 Sector Menu ......................................................................................................723.6.1 Sector Definition ............................................................................................... 723.6.2 Radio Cluster ..................................................................................................... 723.6.3 Antenna Association ......................................................................................... 733.7 BS Menu ............................................................................................................753.7.1 Add .................................................................................................................... 753.7.2 Select................................................................................................................. 773.8 Chassis (AU) Menu .............................................................................................993.8.1 General ..............................................................................................................993.8.2 Ports Control ................................................................................................... 100

BreezeCOMPACT System Manual xiiContents3.8.3 RadioHead ....................................................................................................... 1013.9 Antenna Menu .................................................................................................1033.9.1 Antenna Number ............................................................................................. 1033.9.2 Antenna Product Type..................................................................................... 1033.9.3 Mechanical Down Tilt....................................................................................... 1033.9.4 Electrical Down Tilt .......................................................................................... 1033.9.5 Longitude ........................................................................................................ 1043.9.6 Latitude ........................................................................................................... 1043.9.7 Tower Height ................................................................................................... 1043.9.8 Heading ........................................................................................................... 1043.9.9 Cable Loss........................................................................................................1043.10 GPS Menu .......................................................................................................1053.10.1 General Configuration ..................................................................................... 1053.10.2 Inventory & Statuses....................................................................................... 108

Chapter 1 - System DescriptionIn This Chapter:“About WiMAX” on page 2“The BreezeCOMPACT Solution” on page 9“Element Management Systems” on page 14“Specifications” on page 15

BreezeCOMPACT System Manual 2Chapter 1 - System Description About WiMAX1.1 About WiMAX1.1.1 Introduction to WiMAXEmanating from the broadband world and using all-IP architecture, mobile WiMAX is the leading technology for implementing personal broadband services. With huge market potential and affordable deployment costs, mobile WiMAX is on the verge of a major breakthrough. No other technology offers a full set of chargeable and differentiated voice, data, and premium video services in a variety of wireless fashions - fixed, portable and mobile - that increase revenue and reduce subscriber churn.WiMAX technology is the solution for many types of high-bandwidth applications at the same time across long distances and will enable service carriers to converge the all-IP-based network for triple-play services data, voice, and video.WiMAX with its QoS support, longer reach, and high data capacity is positioned for fixed broadband access applications in rural areas, particularly when distance is too large for DSL and cable, as well as in urban/suburban areas of developing countries. Among applications for residential are high speed Internet, Voice Over IP telephony and streaming video/online gaming with additional applications for enterprise such as Video conferencing, Video surveillance and secured Virtual Private Network (with need for high security). WiMAX technology allows covering applications with media content requesting more bandwidth.WiMAX allows portable and mobile access applications, with incorporation in notebook computers and PDAs, allowing for urban areas and cities to become “metro zones” for portable and mobile outdoor broadband wireless access. As such WiMAX is the natural complement to 3G networks by offering higher bandwidth and to Wi-Fi networks by offering broadband connectivity in larger areas.The WiMAX Forum is an organization of leading operators and communications component and equipment companies. The WiMAX Forum’s charter is to promote and certify the compatibility and interoperability of broadband wireless access equipment that conforms to the Institute for Electrical and Electronics Engineers (IEEE) 802.16 and ETSI HiperMAN standards. The ultimate goal of the WiMAX Forum is to accelerate the introduction of cost-effective broadband wireless access services into the marketplace. Standards-based, interoperable solutions enable economies of scale that, in turn, drive price and performance levels unachievable by proprietary approaches, making WiMAX Forum Certified products.1.1.2 WiMAX Network Reference ModelFigure 1-1 and Figure 1-2 show the basic mobile WiMAX network architecture, with a single ASN-GW and with multiple ASN-GWs, as defined by the WiMAX Forum NWG

BreezeCOMPACT System Manual 3Chapter 1 - System Description About WiMAX. The various components and entities involved in the networking architecture are:1.1.2.1 Access Service Network (ASN)An ASN is defined as a complete set of network functions needed to provide radio access to a WiMAX subscriber. The ASN provides the following mandatory functions:Figure 1-1: Mobile WiMAX Network Reference ModelFigure 1-2: ASN Reference Model containing Multiple ASN-GWs

BreezeCOMPACT System Manual 4Chapter 1 - System Description About WiMAXWiMAX Layer-2 (L2) connectivity with WiMAX mobile station (MS) Transfer of AAA messages to the WiMAX subscriber's home network service provider (H-NSP) for authentication, authorization and session accounting for subscriber sessionsNetwork discovery and selection of the WiMAX subscriber's preferred NSPRelay functionality for establishing Layer-3 (L3) connectivity with a WiMAX MS (i.e. IP address allocation)Radio resource managementASN-CSN tunnelingASN anchored mobilityAn ASN is comprised of network elements such as one or more base transceiver stations and one or more ASN gateways. An ASN may be shared by more than one connectivity service network (CSN).1.1.2.2 Connectivity Service Network (CSN)A CSN is defined as a set of network functions that provide IP connectivity services to WiMAX subscribers. A CSN may offer the following functions:MS IP address and endpoint parameter allocation for user sessionsInternet accessAAA proxy or serverPolicy and admission control based on user subscription profilesASN-CSN tunneling supportWiMAX subscriber billing and inter-operator settlementWiMAX services such as location-based services, connectivity for peer-to-peer services, provisioning, authorization and/or connectivity to IP multimedia services, and facilities to support lawful intercept services such as those compliant with Communications Assistance Law Enforcement Act (CALEA) proceduresA CSN is comprised of network elements such as routers, proxy/servers, user databases, and inter-working gateway devices.1.1.2.3 Network Access Provider (NAP)An NAP is a business entity that provides WiMAX radio access infrastructure to one or more WiMAX network service providers (NSPs). A NAP implements this infrastructure using one or more ASNs.1.1.2.4 Network Service Provider (NSP)An NSP is a business entity that provides IP connectivity and WiMAX services to WiMAX subscribers compliant with the established service level agreement. The NSP concept is an extension of the Internet service provider (ISP) concept, providing network services beyond Internet access. To provide these

BreezeCOMPACT System Manual 6Chapter 1 - System Description About WiMAXDHCP functionalityHandover functionalityThe WIMAX Forum NWG has adopted two different approaches for ASN architecture - centralized and distributed: In the centralized approach there is at least one central ASN-GW, and the BTS operates in transparent mode, as shown in Figure 1-3. Figure 1-3: Centralized Network Reference Model

BreezeCOMPACT System Manual 8Chapter 1 - System Description About WiMAXReference point R5 consists of the set of control plane and bearer plane protocols for internetworking between the CSN operated by the home NSP and that operated by a visited NSP.Reference point R6 consists of the set of control and bearer plane protocols for communication between the BS and ASN-GW. The bearer plane consists of an intra-ASN data path between the BS and ASN gateway. The control plane includes protocols for data path establishment, modification and release control in accordance with the MS mobility events.Reference point R8 consists of the set of control plane message flows and optional bearer plane data flows between the base stations to ensure a fast and seamless handover. The bearer plane consists of protocols that allow data transfer between base stations involved in the handover of a certain MS. It is important to note that all reference points are logical and do not necessarily imply a physical or even direct connection. For instance, the R4 reference point between ASN-GWs might be implemented across the NAP internal transport IP network, in which case R4 traffic might traverse several routers from the source to the destination ASN-GW.

BreezeCOMPACT System Manual 10Chapter 1 - System Description The BreezeCOMPACT SolutionFollowing is a description of each of these working modes:1.2.2.1 External ASN-GWThe ASN-GW is a separate entity (centralized architecture) that communicates with the BTS over R6 interface. Service components (Service Profiles and Service Flows) are configured in the external ASN-GW. MS authentication and services provisioning are managed by a centralized AAA server, based on user credentials (user name and password).1.2.2.2 Embedded ASN-GW Local AuthenticationThe ASN-GW functionality resides in the BTS (distributed architecture). Service components (Service Profiles and Service Flows) are configured in the internal ASN-GW of each BTS. MSs list and services provisioning including authentication are managed locally by the internal ASN-GW (AAA server not needed), based on the SU MAC address.1.2.2.3 Embedded ASN-GW Centralized AuthenticationThe ASN-GW functionality resides in the BTS (distributed architecture). Service components (Service Profiles and Service Flows) are configured locally in the BTS. MS authentication and service provisioning are managed centrally by an external AAA server, based on user credentials (user name and password).1.2.3 System TopologiesBreezeCOMPACT supports different system topologies:One Sector, One CarrierOne Sector, Dual CarrierTwo Sector, Two Carriers (One Carrier per Sector)Following is a description of each of these topologies:1.2.3.1 One Sector, One CarrierThis is the basic configuration based on a single BS, supporting a single 4x4 sector with a bandwidth of 5, 7, or 10 MHz.INFORMATIONIn the current release only One Sector, One Carrier topology with a 10 MHz bandwidth is supported.

BreezeCOMPACT System Manual 11Chapter 1 - System Description The BreezeCOMPACT Solution1.2.3.2 One Sector, Dual CarrierTwo BSs support a single 4x4 sector with a total bandwidth of 20 (10+10) or 14 (7+7) MHz.1.2.3.3 Two Sector, Two Carriers (One Carrier per Sector)Two BSs support two 2x2 sectors, each with a bandwidth of 10 or 7 MHz.Figure 1-5: One Sector, One CarrierFigure 1-6: One Sector, Dual Carrier

BreezeCOMPACT System Manual 12Chapter 1 - System Description The BreezeCOMPACT Solution1.2.4 AntennasIn the 4Motion architecture, the antenna is approached as an independent element. This provides the operator with the flexibility to select the antennas source according to its supplier policy. To ensure the availability of antennas that complement the 4Motion solution, Alvarion works closely with several antenna suppliers to ensure availability of antennas that comply with its requirements.In cases where the operator prefers other antenna vendors, Alvarion can provide a recommended antenna specification based on the required antennas types.Antennas may support one or several different downtilt options:Mechanical Down-Tilt (MDT) using a suitable mounting kit.Electrical Down-Tilt (EDT) that may be either fixed or adjustable using a special adjustment screw.Remote Electrical Tilt (RET) through a special interface.Alvarion offers also AISG (Antenna Interface Standards Group) compliant electrical downtilt control kit enabling remote tilt control for antennas that support RET.In addition to a range of standard commercial antennas, Alvarion offers also a special attached antenna design for convenient installation on top of the BreezeCOMPACT unit.For details on antennas offered by Alvarion refer to “Antennas” on page 19.Figure 1-7: Two Sectors, Two Carriers (One Carrier per Sector)

BreezeCOMPACT System Manual 13Chapter 1 - System Description The BreezeCOMPACT Solution1.2.5 GPSGPS is used to synchronize the air link frames of Intra-site and Inter-site located Base Transceiver Stations to ensure that in all Base Stations the air frame will start at the same time, and that all Base Stations will switch from transmit (downlink) to receive (uplink) at the same time. This synchronization is necessary to prevent Intra-site and Inter-site interference and Base Stations saturation (assuming that all Base Stations are operating with the same frame size and with the same DL/UL ratio).In order for the system to be synchronized, the GPS have to first acquire at least 4 satellites. After that the GPS reception can be reduced to 1 satellite. If no satellite is received the BTS will go to holdover state where internal clock is provided to synchronize the BTS for up to two hours. Following a pre-configured time in holdover state the unit will stop transmissions to avoid interfering with the operation of neighboring units.The all-outdoor GPS Receiver is a pole mountable GPS receiver and antenna in a single environmentally protected enclosure. The receiver is powered from the unit, and it can be installed at a distance of up to 100m from the unit. GPS signals chaining (not supported in current release) enables using a single GPS receiver for several colocated units.

BreezeCOMPACT System Manual 14Chapter 1 - System Description Element Management Systems1.3 Element Management SystemsThe end-to-end IP-based architecture of the system enables full management of all components, using standard management tools. An SNMP agent in the NPU implements proprietary MIBs for remote setting of operational modes and parameters of the Base Transceiver Station equipment. Security features incorporated in the equipment restrict the access for management purposes.Alvarion offers the following management tool:1.3.1 AlvariSTARAlvariSTAR is a comprehensive carrier-class Element Management System (EMS) for Alvarion’s Broadband Wireless Access systems. AlvariSTAR is designed for today's most advanced Network Operation Centers (NOCs), providing the network Operation, Administration and Maintenance (OA&M) staff and managers with all the network surveillance, monitoring and configuration and service provisioning capabilities required to effectively manage the network while keeping the resources and expenses at a minimum.AlvariSTAR offers the network's OA&M staff with a unified, scalable and distributable management system. Utilizing distributed client-server architecture, the user is provided with a robust, scalable and fully redundant management system in which all single points of failure can be avoided.AlvariSTAR provides the following management functionality:Device DiscoveryDevice InventoryTopologyFault ManagementConfiguration ManagementService ManagementData CollectionPerformance MonitoringDevice embedded software upgradeTemplate-based configuration modification of multiple BTS simultaneously.Preparation of offline configuration files for mass configuration of new BTSs.Security ManagementEvent Forwarding to other Network Management Systems.

BreezeCOMPACT System Manual 15Chapter 1 - System Description Specifications1.4 Specifications1.4.1 Modem & RadioTable 1-1: General Modem & Radio SpecificationsItem DescriptionFrequency Band 3400-3675Central Frequency Resolution 0.125 MHzOperation Mode TDDChannel Bandwidth 5 MHz7 MHz10 MHzBandwidth Support Up to 20 MHzPorts Configuration 4x4 Maximum Tx Power 27 dBm per channelTx Power Control Range 10 dB, in 1 dB stepsTx Power Accuracy +/- 1 dBMaximum Input Power @ antenna port -45 dBm before saturation, -35 dBm before damageNoise Figure 5 dB typical, 6 dB maximumModulation OFDM modulation, 1024/512 FFT points; QPSK, QAM16, QAM64Access Method OFDMAFEC Convolutional Turbo Coding: 1/2, 3/4 for QPSK and QAM16. 1/2, 2/3, 3/4, 5/6 for QAM64

BreezeCOMPACT System Manual 16Chapter 1 - System Description Specifications1.4.2 Sensitivity (per channel)** For second order receive diversity configurations sensitivity is improved by 3 dB. For fourth order receive diversity configurations sensitivity is improved by 6 dB.1.4.3 Data Communication (Ethernet Interfaces)Table 1-2: Per Channel Sensitivity, AWGN @ PER=1%Modulation & Coding Sensitivity (dBm), 5 MHz BandwidthSensitivity (dBm), 7 MHz BandwidthSensitivity (dBm), 10 MHz BandwidthQPSK 1/2 Repetition 6 -102 -100 -99QPSK 1/2 Repletion 4 -101 -99 -98QPSK 1/2 Repletion 2 -99 -97 -96QPSK 1/2 -96 -94 -93QPSK 3/4 -93 -91 -9016QAM 1/2 -90 -88 -8716QAM 3/4 -85 -83 -8264QAM1/2 -84 -82 -8164QAM2/3 -82 -79 -7864QAM3/4 -80 -78 -7764QAM5/6 -78 -76 -75Table 1-3: Data Communication (Ethernet Interfaces)Item DescriptionStandard Compliance IEEE 802.3 CSMA/CDDAT 1 (optional, if an SFP is installed) 100/1000 Mbps Base-X optical fiber interface, Full Duplex with Auto Negotiation.DAT 2 100/1000 Mbps Base-T twisted-pair electrical interface, Half/Full Duplex with Auto Negotiation.DAT 3 10/100 Mbps Base-T twisted-pair electrical interface, Half/Full Duplex with Auto Negotiation.

BreezeCOMPACT System Manual 17Chapter 1 - System Description Specifications1.4.4 Configuration and Management1.4.5 Standards Compliance, General1.4.6 EnvironmentalTable 1-4: Configuration and ManagementItem DescriptionManagement (Out Of Band, In Band) SNMPTelnetSNMP Agents SNMP Ver. 2 clientMIB II (RFC 1213), Private MIBsSoftware Upgrade Using TFTP Configuration Upload/Download Using TFTP Table 1-5: Standards Compliance, GeneralTyp e StandardEMC ETSI EN 301 489-1/4FCC Part 15Safety EN60950-1 (CE)UL 60950-1 (US/C)Environmental ETS 300 019:Part 2-1 T 1.2 & part 2-2 T 2.3 for indoor & outdoorPart 2-3 T 3.2 for indoorPart 2-4 T 4.1E for outdoorRadio ETSI EN 302 326FCC Part 90 Subpart ZIC RSS-192 issue1IC RSS-197 issue 3Table 1-6: Environmental SpecificationsTyp e DetailsOperating Temperature -40°C to 55°COperating Humidity 5%-95%, weather protected

BreezeCOMPACT System Manual 18Chapter 1 - System Description Specifications1.4.7 Mechanical and ElectricalTable 1-7: Mechanical & Electrical SpecificationsItem DescriptionDimensions 242.7 x 343 x 166.9 mmWeight 9 KgPower Source -40 to -60 VDCPower Consumption 125 W peakPoE Out (DAT 3) 1 A @ -40 to -60 VDC

BreezeCOMPACT System Manual 19Chapter 1 - System Description Specifications1.4.8 Antennas1.4.8.1 Attached, 3.3-3.8 GHz, 4 Ports 65º Double Dual Slant (xx)Table 1-8: Attached Antenna 3.3-3.8 DDS 65º (P.N. 300726) SpecificationsItem DescriptionFrequency Band (MHz) 3300-3800Number of Elements 4Polarization Linear, +/-45°Gain (dB) 18Azimuth Beamwidth (degrees) 65Elevation Beamwidth (degrees) 6.5Maximum Power (W) 150Cross-polarization Discrimination (dB) >15Front-to-Back Ratio (dB) >30Electrical Downtilt Range (degrees) 0Isolation Between Ports (dB) >30Return Loss (dB) >15RF Interface Impedance (Ohm) 50RF Connectors 4 x N-Type jacks with RF cable tailsDimensions (mm) 720x 266 x 52Weight (Kg) 4Regulatory Compliance RoHS Compliance

BreezeCOMPACT System Manual 20Chapter 1 - System Description Specifications1.4.8.2 3.3 -3.8 GHz, 4 Ports 65º Double Dual Slant (xx), with EDT Table 1-9: ANT BS-EDT-DDP-65°-3.3-3.8GHz (P.N. 323109) SpecificationsItem DescriptionFrequency Band (MHz) 3300-3800Number of Elements 4Polarization Linear, 2 x +/-45°Gain (dB) 18Azimuth Beamwidth (degrees) 65Elevation Beamwidth (degrees) 6.5° with nullfillElevation Side Lobe Level (dB) <-18Maximum Power (W) 150Front-to-Back Ratio (dB) >30Electrical Downtilt Range 0° - 10° independently continuously adjustableIsolation Between Ports (dB) >30Return Loss (dB) >15RF Interface Impedance (Ohm) 50RF Connectors 4 x N-Type jackMounting F-042-GL-E: Fixed clamps for 50-115 mm diameter pipe, 5KgT-045-GL-E: Adjustable clamps for 50-115 mm diameter pipe, 0-10° down tilt, 6KgDimensions (mm) 750 x 300 x 115Weight (Kg) 10

BreezeCOMPACT System Manual 21Chapter 1 - System Description Specifications1.4.8.3 3.3 -3.8 GHz, 2 Ports 65º Dual Slant (x)Table 1-10: ANT,BS,3.3-3.8GHz, DS,Sec.65°,16.5dBi min (P.N. 300644) SpecificationsItem DescriptionFrequency Band (MHz) 3300-3800Number of Elements 2Polarization Linear, +/-45°Gain 16.5dBi +/- 0.5dBVSWR 1.5:1 (max)Azimuth Beamwidth (degrees) 65 +/-5Elevation Beamwidth (degrees) 6 +/-1Maximum Power (W) 50Cross-polarization Discrimination (dB) -15Front-to-Back Ratio (dB) >25Isolation Between Ports (dB) >25RF Interface Impedance (Ohm) 50Lightning Protection DC groundedRF Connectors 2 x N-Type jacksMounting Fully adjustable pipe mount (1.63” to 4.5” pipe) with 0-15° down tiltDimensions (mm) 711 x 171 x 90Weight (Kg) 2.6 (excluding mounting kit)Regulatory Compliance RoHS Compliance

BreezeCOMPACT System Manual 22Chapter 1 - System Description Specifications1.4.8.4 3.3 -3.8 GHz, 2 Ports 90º Dual Slant (x)Table 1-11: ANT,BS,3.3-3.8GHz, DS,Sec.90°,15.5dBi min (P.N. 300645) SpecificationsItem DescriptionFrequency Band (MHz) 3300-3800Number of Elements 2Polarization Linear, +/-45°Gain 15.5dBi +/- 0.5dBVSWR 1.5:1 (max)Azimuth Beamwidth (degrees) 85 +/-5Elevation Beamwidth (degrees) 6 +/-1Maximum Power (W) 50Cross-polarization Discrimination (dB) -17Front-to-Back Ratio (dB) >25Isolation Between Ports (dB) >25RF Interface Impedance (Ohm) 50Lightning Protection DC groundedRF Connectors 2 x N-Type jacksMounting Fully adjustable pipe mount (1.63” to 4.5” pipe) with 0-15° down tiltDimensions (mm) 711 x 171 x 90Weight (Kg) 2.6 (excluding mounting kit)Regulatory Compliance RoHS Compliance

BreezeCOMPACT System Manual 23Chapter 1 - System Description Specifications1.4.8.5 3.3 -3.8 GHz, 4 Ports 65º Double Dual Slant (xx)Table 1-12: ANT-DDP-65°-3.3-3.8GHz (P.N. 300720) SpecificationsItem DescriptionFrequency Band (MHz) 3300-3800Number of Elements 4Polarization Linear, 2 x +/-45°Gain 18dBiAzimuth Beamwidth (degrees) 65Elevation Beamwidth (degrees) 7Maximum Power (W) 150Cross-polarization Discrimination (dB) >15Front-to-Back Ratio (dB) >30Isolation Between Ports (dB) >30Return Loss (dB) >15Upper Sidelobe Suppression (dB) >18RF Interface Impedance (Ohm) 50Lightning Protection DC groundedRF Connectors 4 x N-Type jackElectrical Downtilt 4° (fixed)Mounting Adjustable mounting kit (optional) for 50-115mm pole, with +2° to -10° tilt rangeDimensions (mm) 720 x 260 x 55Weight (Kg) 7 (excluding mounting kit)

BreezeCOMPACT System Manual 24Chapter 1 - System Description Specifications1.4.8.6 3.3 -3.8 GHz, 4 Ports 90º Double Dual Slant (xx)Table 1-13: ANT-DDP-90°-3.3-3.8GHz (P.N. 300719) SpecificationsItem DescriptionFrequency Band (MHz) 3300-3800Number of Elements 4Polarization Linear, 2 x +/-45°Gain 17dBiAzimuth Beamwidth (degrees) 90Elevation Beamwidth (degrees) 7Maximum Power (W) 150Cross-polarization Discrimination (dB) >15Front-to-Back Ratio (dB) >30Isolation Between Ports (dB) >30Return Loss (dB) >15Upper Sidelobe Suppression (dB) >18RF Interface Impedance (Ohm) 50Lightning Protection DC groundedRF Connectors 4 x N-Type jackElectrical Downtilt 4° (fixed)Mounting Adjustable mounting kit (optional) for 50-115mm pole, with +2° to -10° tilt rangeDimensions (mm) 720 x 260 x 55Weight (Kg) 7 (excluding mounting kit)

BreezeCOMPACT System Manual 25Chapter 1 - System Description Specifications1.4.8.7 3.3 -3.8 GHz, 90º VerticalTable 1-14: ANT BS 3.3-3.8GHz, 90° V (P.N. 300616) SpecificationsItem DescriptionFrequency Band (MHz) 3300-3800Number of Elements 1Polarization VerticalGain 14.5dBi (min)VSWR 1.8:1 (max)Azimuth Beamwidth (degrees) 90Elevation Beamwidth (degrees) 7Maximum Power (W) 10RF Interface Impedance (Ohm) 50Lightning Protection DC groundedRF Connectors 2 x N-Type jacksMounting Tilt Mounting Kit for 2” to 4.5” Dia poleDimensions (mm) 766 x 150 x 86Weight (Kg) 2.2 (excluding mounting kit)Regulatory Compliance ESTI EN 302 085 V.1.1.2 (2001-02) CS3RoHS Compliance

BreezeCOMPACT System Manual 26Chapter 1 - System Description Specifications1.4.9 BMAX-4M-GPS Receiver SpecificationsTable 1-15: BMAX-4M-GPS Receiver, Mechanical & Electrical SpecificationsItem DescriptionDimensions 8.8 x 10.4 x 16 cm Weight 0.38 KgPower Source 12 VDC from the NPUPower Consumption 2W maximumConnector RJ-45

Chapter 2 - BreezeCOMPACT InstallationIn this Chapter:“Introduction” on page 28“Unpacking and Inspecting” on page 29“BreezeCOMPACT Installation” on page 35“Connecting the BreezeCOMPACT Cables” on page 53“System Initial Verification” on page 68“GPS Installation” on page 47

4Motion Installation Manual 28Chapter 2 - BreezeCOMPACT Installation Introduction2.1 IntroductionBreezeCOMPACT is a small, lightweight, optimized single box, all-outdoor base station system enabling easy installation and maintenance, thus reducing the operator's Total Cost of Ownership (TCO).BreezeCOMPACT allows flexible mounting options including rooftops, walls, poles and top towers installation, thus providing an effective solution for installation-constrained areas.CAUTIONONLY experienced installation professionals who are familiar with local building and safety codes and, wherever applicable, are licensed by the appropriate government regulatory authorities should install outdoor units and antennas.Failure to do so may void the product warranty and may expose the end user or Service Provider to legal and financial liabilities. Alvarion and its resellers or distributors are not liable for injury, damage or regulation violations associated with the installation of Outdoor Units or antennas.FrançaisSEULS les installateurs professionnels expérimentés qui sont familiers avec les codes locaux des bâtiments et de la sécurité et, lorsque cela s'applique, qui sont autorisés par les autorités gouvernementales de régulation, doivent installer les unités extérieures et les antennes. Le non-respect de cette clause peut invalider la garantie du produit et exposer l'utilisateur final ou le prestataire de services à des responsabilités légales et financières. Le fabricant et ses revendeurs ou distributeurs ne sont pas responsables pour toute blessure, dommage ou violation de la réglementation associée à l'installation d'unités extérieures ou d'antennes. ItalianoATTENZIONE: SOLO professionisti esperti che hanno familiarità con le norme di costruzione locali e coi codici di sicurezza e, ove applicabile, sono autorizzati dalle autorità governative competenti possono installare unità esterne ed antenne. Assicurarsi che le unità esterne, antenne e strutture di supporto siano installate correttamente per eliminare ogni pericolo fisico a persone o cose. In caso contrario, ciò può invalidare la garanzia del prodotto e può esporre l'utente finale o il fornitore di servizi a responsabilità legali ed economiche. Anche quando la messa a terra non è obbligatoria in base alla normativa regolatoria applicabile e ai codici nazionali, è obbligatorio garantire che l'unità esterna e il palo dell'antenna siano messi a terra e idonei dispositivi di protezione contro i fulmini siano utilizzati in modo da fornire protezione contro le sovratensioni e le scariche statiche. In ogni caso, il Fornitore e i suoi rivenditori non sono responsabili per eventuali danni fisici, danni ad oggetti o violazioni del regolamento associati con o causati dall' installazione, la messa a terra o di protezione contro i fulmini.

4Motion Installation Manual 29Chapter 2 - BreezeCOMPACT Installation Unpacking and Inspecting2.2 Unpacking and Inspecting1Examine the shipping container for damage. If you notice any damage, notify the carrier that delivered the unit immediately and enter a service call in Alvarion's SSM (www.alvarion.com > Customer Service area).2Check the items against this manual. If any items are missing, notify your agent immediately.3Remove the packing material without damaging it.4Components susceptible to damage from static electricity are packed in static resistant bags. Unpack these items in a static-free environment to avoid damage.

4Motion Installation Manual 30Chapter 2 - BreezeCOMPACT Installation Unpacking and Inspecting2.2.1 Package ContentBTS (weight: 9 kg) Mounting kit (for 1''-4'' poles) including:»4 x heavy duty metal clamps»4 x M8 threaded rods»4 x M8x22 Hex screws»8 x M8 nuts»8 x M8 flat washers»8 x M8 spring washersSealing gland wrenchFor poles up to 6'' - an additional kit containing 4 metal bands (ordered separately)For poles larger than 6” and for wall mount - two large heavy duty metal clamps (ordered separately)2.2.2 Additional Installation RequirementsThe following items are also required to install the BTS:Power Supply: High power AC/DC Power Supply unit and DC power cable* (available in various lengths)Power cable*: a 250m power cable drum. 6-pin mini-fit (manufactured by Samtek), DC in -40 to -60VDC at connector input.Ethernet cable*: a 250m CAT5e cable drum (connectors not included)Optical fiber cable*: 10/100/1000BASE-T Optic SFP (small form-factor pluggable) shieldedAntenna(s)* and RF cable(s)* for connecting the antenna(s) to the BTS. (applicable for units without integral antennas). External antennas are connected via LMR-400 1m / 0.5m cables. Grounding 10 AWG cable with an appropriate terminationGPS Antenna kit including mounting kit, 3m cable, and one lightning arrestorHook for carrying the assembly up the poleInstallation tools and materialsINFORMATIONItems marked with an asterisk (*) are available from Alvarion.

Navigation menu